[PATCH v2 3/4] arm64: dts: qcom: sc7180: Add tertiary mi2s pinctrl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some devices use tertiary mi2s to connect external audio codec.
Add it near the other two i2s pinctrl definitions so the devices don't
have to duplicate it.

Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a79c0f2e1879..9f68b5ff0030 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2033,6 +2033,11 @@ sec_mi2s_active: sec-mi2s-active-state {
 				function = "mi2s_1";
 			};
 
+			ter_mi2s_active: ter-mi2s-active-state {
+				pins = "gpio63", "gpio64", "gpio65", "gpio66";
+				function = "mi2s_2";
+			};
+
 			pri_mi2s_active: pri-mi2s-active-state {
 				pins = "gpio53", "gpio54", "gpio55", "gpio56";
 				function = "mi2s_0";

-- 
2.41.0




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux