Linux ARM MSM

• Thread Index

• [PATCH] scsi: ufs: qcom: avoid re-init quirk when gears match
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH v3 0/5] Rework system pressure interface to the scheduler
  • From: Vincent Guittot <vincent.guittot@xxxxxxxxxx>
• [PATCH] arm64: qcom: Select PM and PM_GENERIC_DOMAINS
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH] soc: qcom: aoss: Mark qmp_send() __printf()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: brgl@xxxxxxxx
• Re: [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• [PATCH v1 6/6] PCI: epf-mhi: Add flag to enable HDMA for SA8775P
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 4/6] dmaengine: dw-edma: Move HDMA_V0_MAX_NR_CH definition to edma.h
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 5/6] PCI: qcom-ep: Provide number of read/write channel for HDMA
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 3/6] PCI: dwc: Add HDMA support
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 1/6] dmaengine: dw-edma: Pass 'struct dw_edma_chip' to irq_vector()
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 0/6] Add Change to integrate HDMA with dwc ep driver
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• [PATCH v1 2/6] dmaengine: dw-edma: Introduce helpers for getting the eDMA/HDMA max channel count
  • From: Mrinmay Sarkar <quic_msarkar@xxxxxxxxxxx>
• Re: [PATCH v3] drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 06/10] coresight-tpdm: Add support to configure CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v4 05/10] coresight-tpda: Add support to configure CMB element
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v4 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v4 6/6] arm64: dts: qcom: aim300: add AIM300 AIoT
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 5/6] arm64: dts: qcom: add base AIM300 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 4/6] arm64: dts: qcom: qcm8550: introduce qcm8550 dtsi
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 3/6] soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 2/6] dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 1/6] dt-bindings: arm: qcom: Document QCM8550, QCS8550 SoC and board
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• [PATCH v4 0/6] arm64: qcom: add AIM300 AIoT board support
  • From: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
• Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 0/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: "Maulik Shah (mkshah)" <quic_mkshah@xxxxxxxxxxx>
• [PATCH] soc: qcom: smp2p: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v4 10/10] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 09/10] dt-bindings: arm: Add support for TPDM CMB MSR register
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 08/10] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 07/10] coresight-tpdm: Add pattern registers support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 05/10] coresight-tpda: Add support to configure CMB element
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 06/10] coresight-tpdm: Add support to configure CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 04/10] coresight-tpdm: Add CMB dataset support
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 03/10] dt-bindings: arm: Add support for CMB element size
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 02/10] coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 00/10] Add support to configure TPDM CMB subunit
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• [PATCH v4 01/10] coresight-tpdm: Optimize the store function of tpdm simple dataset
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Eric Chanudet <echanude@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sc8280xp: Introduce additional tsens instances
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/4] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: rename PM2250 to PM4125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: socinfo: rename PM2250 to PM4125
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] arm64: dts: qcom: sa8775p: Add new memory map updates to SA8775P
  • From: Ninad Naik <quic_ninanaik@xxxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [RFC 6/7] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sudeep Holla <sudeep.holla@xxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v3 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v3 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH v3 0/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 6/6] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Update generated headers
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] media: venus: add new rate control type MBR for encoder
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• [PATCH 1/2] media: v4l2-ctrls: add encoder maximum bitrate control
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• [PATCH 0/2] add MBR type rate control for encoder
  • From: Sachin Kumar Garg <quic_sachinku@xxxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2 05/15] usb: typec: tcpm: fix the PD disabled case
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• [PATCH] hwmon: (peci/cputemp) Add a null pointer check to the wled_configure
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 943b9f0ab2cfbaea148dd6ac279957eb08b96904
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] soc: qcom: aoss: Add tracepoints in qmp_send()
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• [PATCH v3] soc: qcom: aoss: Add debugfs interface for sending messages
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] Bluetooth: qca: fix device-address endianness
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• [PATCH v3] drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH] drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] drm/msm/adreno: Update generated headers
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Sergey Ryazanov <ryazanov.s.a@xxxxxxxxx>
• Re: [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC 2/7] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] drm/msm/adreno: Add a null pointer check in zap_shader_load_mdt()
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [RFC 7/7] arm64: dts: qcom: x1e80100: Enable LLCC/DDR dvfs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 6/7] arm64: dts: qcom: x1e80100: Enable cpufreq
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 5/7] arm64: dts: qcom: x1e80100: Add cpucp mailbox and sram nodes
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 4/7] soc: qcom: Utilize qcom scmi vendor protocol for bus dvfs
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 3/7] firmware: arm_scmi: Add QCOM vendor protocol
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 2/7] mailbox: Add support for QTI CPUCP mailbox controller
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 1/7] dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [RFC 0/7] firmware: arm_scmi: Qualcomm Vendor Protocol
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH 9/9] PCI/pwrseq: add a pwrseq driver for QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 8/9] dt-bindings: wireless: ath11k: describe WCN7850
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 7/9] dt-bindings: wireless: ath11k: describe QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 6/9] PCI/pwrseq: add pwrseq core code
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 5/9] PCI: hold the rescan mutex when scanning for the first time
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 4/9] PCI: create platform devices for child OF nodes of the port node
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 3/9] arm64: dts: qcom: sm8650-qrd: add Wifi nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 2/9] arm64: dts: qcom: sm8550-qrd: add Wifi nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 0/9] PCI: introduce the concept of power sequencing of PCIe devices
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/9] arm64: dts: qcom: qrb5165-rb5: describe the WLAN module of QCA6390
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: ipq5332: Add RDP441 board device tree
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: ipq9574: Add RDP433 board device tree
  • From: Lei Wei <quic_leiwei@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH v2 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 6/6] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: add TCSR registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 0/6] phy: qcom: qmp-usbc: properly handle the clamping register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: mfd: qcom,tcsr: Add compatibles for QCM2290 and SM6115
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] ARM: mach-qcom: fix support for ipq806x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 0/3] firmware: arm_scmi: Register and handle limits change notification
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH 3/3] cpufreq: scmi: Enable boost support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH 2/3] firmware: arm_scmi: Add support for marking certain frequencies as boost
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH 1/3] OPP: Extend dev_pm_opp_data with turbo support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH 0/3] cpufreq: scmi: Add boost frequency support
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 4/4] cpufreq: scmi: Register for limit change notifications
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 3/4] cpufreq: Export cpufreq_update_pressure
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 2/4] firmware: arm_scmi: Add perf_freq_xlate interface
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 1/4] firmware: arm_scmi: Add perf_notify_support interface
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH V2 0/4] firmware: arm_scmi: Register and handle limits change notification
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• [PATCH] clk: qcom: gcc-ipq6018: add qdss_at clock needed for wifi operation
  • From: Mantas Pucka <mantas@xxxxxxxxxxxx>
• Re: [PATCH 0/3] firmware: arm_scmi: Register and handle limits change notification
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] soc: qcom: rpmh-rsc: Enhance check for VREG in-flight request
  • From: Maulik Shah <quic_mkshah@xxxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: scmi: Register for limit change notifications
  • From: Lukasz Luba <lukasz.luba@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: PCI: qcom,pcie-sm8450: move SM8450 to dedicated schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: PCI: qcom,pcie-sm8550: move SM8550 to dedicated schema
  • From: Manivannan Sadhasivam <mani@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH 2/3] firmware: arm_scmi: Add perf_opp_xlate interface
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH 3/3] cpufreq: scmi: Register for limit change notifications
  • From: Sibi Sankar <quic_sibis@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] coresight: core: Add device name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [net-next PATCH RFC v3 1/8] dt-bindings: net: document ethernet PHY package nodes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 11/15] phy: qcom: qmp-usb: drop dual-lane handling
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 08/13] phy: qcom: qmp-usb: drop dual-lane handling
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: arm: Add device-name in the coresight components
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v12 04/41] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH AUTOSEL 5.4 26/31] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 25/31] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 36/44] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 35/44] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 37/47] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 36/47] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.1 53/68] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 52/68] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 084/104] arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 083/104] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 082/104] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 046/104] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 045/104] arm64: dts: qcom: sm8450: fix soundwire controllers node name
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 044/104] arm64: dts: qcom: sm8550: fix soundwire controllers node name
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 013/104] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 012/104] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 011/104] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 010/104] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 009/104] ARM: dts: qcom: strip prefix from PMIC files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 086/108] arm64: dts: qcom: Fix coresight warnings in in-ports and out-ports
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 085/108] arm64: dts: qcom: msm8998: Fix 'out-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 084/108] arm64: dts: qcom: msm8996: Fix 'in-ports' is a required property
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 047/108] arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 046/108] arm64: dts: qcom: sm8450: fix soundwire controllers node name
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 045/108] arm64: dts: qcom: sm8550: fix soundwire controllers node name
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 013/108] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 012/108] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 011/108] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 010/108] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 009/108] ARM: dts: qcom: strip prefix from PMIC files
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v3 3/5] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: Steev Klimaszewski <steev@xxxxxxxx>
• Re: [PATCH] dt-bindings: remoteproc: do not override firmware-name $ref
  • From: Conor Dooley <conor@xxxxxxxxxx>
• QAIC reset failure
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [3/3] ASoC: hdmi-codec: drop drm/drm_edid.h include
  • From: Jani Nikula <jani.nikula@xxxxxxxxx>
• Re: [PATCH] dt-bindings: remoteproc: do not override firmware-name $ref
  • From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 6/6] dt-bindings: PCI: qcom,pcie-sc8280xp: move SC8280XP to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5/6] dt-bindings: PCI: qcom,pcie-sm8350: move SM8350 to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 4/6] dt-bindings: PCI: qcom,pcie-sm8150: move SM8150 to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: PCI: qcom,pcie-sm8250: move SM8250 to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/33] spi: get rid of some legacy macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• [PATCH v8 5/5] iommu/arm-smmu: add ACTLR data and support for SC7280
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v8 4/5] iommu/arm-smmu: add ACTLR data and support for SM8550
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v8 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v8 2/5] iommu/arm-smmu: refactor qcom_smmu structure to include single pointer
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v8 1/5] iommu/arm-smmu: re-enable context caching in smmu reset operation
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• [PATCH v8 0/5] iommu/arm-smmu: introduction of ACTLR implementation for Qualcomm SoCs
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: PCI: qcom,pcie-sm8450: move SM8450 to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: PCI: qcom,pcie-sm8550: move SM8550 to dedicated schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/33] spi: get rid of some legacy macros
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] coresight: core: Add device name support
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sm8450: Add missing interconnects to serial
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• drivers: irqchip: irq-qcom-mpm: rpm IRQ does not trigger when resuming on msm8953 soc
  • From: Bert Karwatzki <spasswolf@xxxxxx>
• Re: [PATCH 3/5] media: qcom: camss: Add sc8280xp resources
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/15] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sm8450: Add missing interconnects to serial
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: Amit Pundir <amit.pundir@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: remoteproc: do not override firmware-name $ref
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: sdm845: Fix wild reboot during Antutu test
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v7 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] coresight: core: Add device name support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 03/12] clk: qcom: gcc-sm6375: Unregister critical clocks
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: defconfig: enable Novatek NT36672E DSI Panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] coresight: core: Add device name support
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH 1/2] arm64: defconfig: enable Novatek NT36672E DSI Panel driver
  • From: "Ritesh Kumar (QUIC)" <quic_riteshk@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] coresight: core: Add device name support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: defconfig: enable Novatek NT36672E DSI Panel driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] add display and panel on qcm6490 idp
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: qcm6490-idp: add display and panel
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• [PATCH 1/2] arm64: defconfig: enable Novatek NT36672E DSI Panel driver
  • From: Ritesh Kumar <quic_riteshk@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• [PATCH v2] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: add TCSR registers
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: mfd: qcom,tcsr: Add compatibles for QCM2290 and SM6115
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support SDM660
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 0/2] arm64: dts: qcom: Add coresight nodes for sm8450
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: arm: coresight: Remove pattern match of ETE node name
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH] drm/msm/adreno: Add a null pointer check to the zap_shader_load_mdt
  • From: Kunwu Chan <chentao@xxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: sdm630: add USB QMP PHY support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: sda660-ifc6560: enable USB 3.0 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/4] phy: qcom: qmp-usbc: enable SDM630 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/4] phy: qcom: qmp-usbc: enable SDM660 support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support SDM660
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 6/6] arm64: dts: qcom: sm6115: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 5/6] arm64: dts: qcom: qcm2290: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 3/6] phy: qcom: qmp-usbc: handle CLAMP register in a correct way
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 4/6] arm64: dts: qcom: msm8998: declare VLS CLAMP register for USB3 PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: mfd: qcom,tcsr: Add compatibles for QCM2290 and SM6115
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: add TCSR registers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/6] phy: qcom: qmp-usbc: properly handle the clamping register
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 00/33] spi: get rid of some legacy macros
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 21/33] spi: geni-qcom: Follow renaming of SPI "master" to "controller"
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: remoteproc: do not override firmware-name $ref
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/ci: add sc7180-trogdor-kingoftown
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v1] drm/ci: Update xfails for newly added msm tests
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Georgi Djakov <djakov@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: arm: Add device-name in the coresight components
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 1/2] coresight: core: Add device name support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• [PATCH v2 0/2] coresight: core: Add device name support
  • From: Mao Jinlong <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 08/23] soc: qcom: Add driver for Qualcomm Krait L2 cache scaling
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: sa8755p ufs ice bug: gcc_ufs_phy_ice_core_clk status stuck at 'off'
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH] interconnect: qcom: sm8450: Revert "interconnect: qcom: sm8450: Enable sync_state"
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v1] drm/ci: Update xfails for newly added msm tests
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v1] drm/ci: add sc7180-trogdor-kingoftown
  • From: Helen Koike <helen.koike@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/5] reset: gpio: Add GPIO-based reset controller
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v12 04/41] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: add common Type-C USB Switch schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 04/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1] drm/ci: Update xfails for newly added msm tests
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: James Clark <james.clark@xxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/3] phy: qcom: edp: Add support for DT phy mode configuration
  • From: Abel Vesa <abel.vesa@xxxxxxxxxx>
• [PATCH v5] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH v2 04/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: usb: add common Type-C USB Switch schema
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH] dt-bindings: usb: add common Type-C USB Switch schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v6 00/12] Unregister critical branch clocks + some RPM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2 04/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Flaky tests for msm sdm845
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 05/15] usb: typec: tcpm: fix the PD disabled case
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: split from sc8280xp PHY schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 02/15] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 01/15] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• [PATCH 1/2] soc: qcom: socinfo: rename PM2250 to PM4125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: rename PM2250 to PM4125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 0/2] soc: qcom: rename rename PM2250 to PM4125
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 06/15] usb: typec: qcom-pmic-typec: fix arguments of qcom_pmic_typec_pdphy_set_roles
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 08/15] usb: typec: qcom-pmic-typec: allow different implementations for the port backend
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 06/15] usb: typec: qcom-pmic-typec: fix arguments of qcom_pmic_typec_pdphy_set_roles
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [PATCH v6 00/12] Unregister critical branch clocks + some RPM
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 02/12] clk: qcom: Use qcom_branch_set_clk_en()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 01/12] clk: qcom: branch: Add a helper for setting the enable bit
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 15/15] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 14/15] arm64: dts: qcom: sm6115: drop pipe clock selection
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 13/15] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 10/15] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 11/15] phy: qcom: qmp-usb: drop dual-lane handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 12/15] phy: qcom: qmp-usbc: add support for the Type-C handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 08/15] usb: typec: qcom-pmic-typec: allow different implementations for the port backend
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 07/15] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 06/15] usb: typec: qcom-pmic-typec: fix arguments of qcom_pmic_typec_pdphy_set_roles
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 05/15] usb: typec: tcpm: fix the PD disabled case
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 04/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 03/15] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: split from sc8280xp PHY schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 02/15] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 01/15] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 00/15] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v6 12/12] arm64: dts: qcom: sm6115: Add VDD_CX to GPU_CC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 11/12] arm64: dts: qcom: sm6115: Add VDD_CX to GCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 10/12] arm64: dts: qcom: qcm2290: Add VDD_CX to GCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 09/12] arm64: dts: qcom: sm6375: Add VDD_CX to GCC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 08/12] clk: qcom: gcc-qcm2290: Unregister critical clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 06/12] clk: qcom: gpucc-sm6115: Add runtime PM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 07/12] clk: qcom: gcc-sm6115: Unregister critical clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 05/12] clk: qcom: gpucc-sm6115: Unregister critical clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 04/12] clk: qcom: gpucc-sm6375: Unregister critical clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 02/12] clk: qcom: Use qcom_branch_set_clk_en()
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 03/12] clk: qcom: gcc-sm6375: Unregister critical clocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 01/12] clk: qcom: branch: Add a helper for setting the enable bit
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v6 00/12] Unregister critical branch clocks + some RPM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 07/13] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 05/13] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 13/13] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 10/13] phy: qcom: qmp-usbc: add support for the Type-C handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 09/13] phy: qcom: qmp-usbc: drop single lane handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 07/13] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 06/13] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 05/13] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 06/13] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH net v3] net: stmmac: Fix ethool link settings ops for integrated PCS
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 11/13] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 3/3] clk: qcom: gcc-sm8150: Add gcc video resets for sm8150
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 04/13] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 13/13] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 12/13] arm64: dts: qcom: sm6115: drop pipe clock selection
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 11/13] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 10/13] phy: qcom: qmp-usbc: add support for the Type-C handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 09/13] phy: qcom: qmp-usbc: drop single lane handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 08/13] phy: qcom: qmp-usb: drop dual-lane handling
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 07/13] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/13] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 05/13] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 13/13] arm64: dts: qcom: qrb4210-rb2: enable USB-C port handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 12/13] arm64: dts: qcom: sm6115: drop pipe clock selection
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 11/13] arm64: dts: qcom: pmi632: define USB-C related blocks
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 07/13] phy: qcom: qmp-usb: split USB-C PHY driver
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 10/13] phy: qcom: qmp-usbc: add support for the Type-C handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 09/13] phy: qcom: qmp-usbc: drop single lane handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 08/13] phy: qcom: qmp-usb: drop dual-lane handling
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 04/13] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: support USB-C data
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 06/13] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 05/13] usb: typec: qcom-pmic-typec: allow different implementations for the PD PHY
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 03/13] dt-bindings: phy: qcom,msm8998-qmp-usb3-phy: split from sc8280xp PHY schema
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 02/13] dt-bindings: usb: qcom,pmic-typec: add support for the PMI632 block
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 01/13] dt-bindings: regulator: qcom,usb-vbus-regulator: add support for PMI632
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 00/13] usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 8d04a7e2ee3fd6aabb8096b00c64db0d735bc874
  • From: kernel test robot <lkp@xxxxxxxxx>
• [RFC PATCH] rpmsg: glink: Add bounds check on tx path
  • From: Michal Koutný <mkoutny@xxxxxxxx>
• Re: [PATCH 1/2] soc: qcom: geni-se: Add M_TX_FIFO_NOT_EMPTY bit definition
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] serial: qcom-geni: Don't cancel/abort if we can't get the port lock
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 1/2] soc: qcom: geni-se: Add M_TX_FIFO_NOT_EMPTY bit definition
  • From: Douglas Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH V1 1/2] scsi: ufs: qcom : Refactor phy_power_on/off calls
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 00/18] perf: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] bus: mhi: host: Add MHI_PM_SYS_ERR_FAIL state
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: PCI: qcom: Add interconnects path as required property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: PCI: qcom: Add interconnects path as required property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 1/6] dt-bindings: PCI: qcom: Add interconnects path as required property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v3 5/5] i2c: muxes: pca954x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 4/5] ASoC: codecs: wsa884x: Allow sharing reset GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 3/5] ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/5] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 1/5] reset: gpio: Add GPIO-based reset controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 0/5] reset: gpio: ASoC: shared GPIO resets
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH V1 2/2] phy: qcom: Refactor phy_power_on and phy_calibrate callbacks
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V1 0/2] Refactor phy powerup sequence
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• [PATCH V1 1/2] scsi: ufs: qcom : Refactor phy_power_on/off calls
  • From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
• Re: [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v14 2/4] Input: add core support for Goodix Berlin Touchscreen IC
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 6/6] arm64: dts: qcom: ipq9574: Add RDP433 board device tree
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 0/6] Add PPE device tree node for Qualcomm IPQ SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 0/6] Add PPE device tree node for Qualcomm IPQ SoC
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• [PATCH v6 6/6] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 5/6] arm64: dts: qcom: sm8450: Add opp table support to PCIe
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 4/6] dt-bindings: pci: qcom: Add opp table
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 3/6] PCI: qcom: Add missing icc bandwidth vote for cpu to PCIe path
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 2/6] arm64: dts: qcom: sm8450: Add interconnect path to PCIe node
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 1/6] dt-bindings: PCI: qcom: Add interconnects path as required property
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH v6 0/6] PCI: qcom: Add support for OPP
  • From: Krishna chaitanya chundru <quic_krichai@xxxxxxxxxxx>
• [PATCH 1/1] i2c: i2c-qcom-geni: Correct I2C TRE sequence
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH 00/18] perf: Convert to platform remove callback returning void
  • From: Will Deacon <will@xxxxxxxxxx>
• Re: [3/3] ASoC: hdmi-codec: drop drm/drm_edid.h include
  • From: "Sarha, Jyri" <jyri.sarha@xxxxxxxxx>
• Re: [PATCH v7 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v7 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] Add support to configure TPDM CMB subunit
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH] drm/ci: Add msm tests
  • From: Vignesh Raman <vignesh.raman@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v7 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2] power: supply: qcom_battmgr: Ignore notifications before initialization
  • From: neil.armstrong@xxxxxxxxxx
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v3 6/8] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Suzuki K Poulose <suzuki.poulose@xxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 8/8] coresight-tpdm: Add msr register support for CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: Proposal for QCOM PCIe switch power and configuration driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] media: venus: flush all buffers in output plane streamoff
  • From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
• Re: [PATCH] thermal: qcom: tsens: remove dependency to NVMEM_QCOM_QFPROM
  • From: Jens Glathe <jens.glathe@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Proposal for QCOM PCIe switch power and configuration driver
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: hui liu <quic_huliu@xxxxxxxxxxx>
• Re: [PATCH v3 6/8] coresight-tpdm: Add timestamp control register support for the CMB
  • From: Tao Zhang <quic_taozha@xxxxxxxxxxx>
• Re: [PATCH v2] media: venus: flush all buffers in output plane streamoff
  • From: Nathan Hebert <nhebert@xxxxxxxxxxxx>
• Re: [PATCH 0/5] media: qcom: camss: Add sc8280xp support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH] drm/msm/mdss: specify cfg bandwidth for SDM670
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 0/5] media: qcom: camss: Add sc8280xp support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 5/5] media: qcom: camss: vfe-17x: Rename camss-vfe-170 to camss-vfe-17x
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 4/5] media: qcom: camss: Add sc8280xp support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 3/5] media: qcom: camss: Add sc8280xp resources
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 1/5] media: qcom: camss: csiphy-3ph: Add Gen2 v1.1 two-phase MIPI CSI-2 DPHY init
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 2/5] media: qcom: camss: Add CAMSS_SC8280XP enum
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH 0/5] media: qcom: camss: Add sc8280xp support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/2] arm64: dts: qcom: sm8650: mark gpio74 as reserved
  • From: Elliot Berman <quic_eberman@xxxxxxxxxxx>
• Re: [PATCH] bus: mhi: host: Add sysfs entry to force device to enter EDL
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
  • From: Georgi Djakov <quic_c_gdjako@xxxxxxxxxxx>
• Re: [PATCH v7 3/5] iommu/arm-smmu: introduction of ACTLR for custom prefetcher settings
  • From: Bibek Kumar Patro <quic_bibekkum@xxxxxxxxxxx>
• Re: Proposal for QCOM PCIe switch power and configuration driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Proposal for QCOM PCIe switch power and configuration driver
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: remove mdss_dp_test_bit_depth_to_bpc()
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: remove mdss_dp_test_bit_depth_to_bpc()
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 2/4] dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 1/4] dt-bindings: i2c: qcom-cci: Document sc8280xp compatible
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v4 0/4] arm64: dts: qcom: sc8280xp: Add CAMSS core dtsi support
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• [PATCH v1] drm/msm/dp: remove mdss_dp_test_bit_depth_to_bpc()
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• [PATCH 0/2] arm64: dts: qcom: sm8650: mark gpio74 as reserved
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH 1/6] arm64: dts: qcom: ipq9574: Add PPE device tree node
  • From: Jie Luo <quic_luoj@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sa8540p-ride: disable pcie2a node
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2 2/4] drm/panel: Add driver for DJN HX83112A LCD panel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] watchdog: qcom: fine tune the max timeout value calculation
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] Revert "drm/msm/gpu: Push gpu lock down past runpm"
  • From: Daniel Vetter <daniel@xxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: sa8540p-ride: disable pcie2a node
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH RESEND v2] hwspinlock: qcom: Remove IPQ6018 SOC specific compatible
  • From: Vignesh Viswanathan <quic_viswanat@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: qcom: ipq6018: add LDOA2 regulator
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v3 4/4] arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] watchdog: qcom: fine tune the max timeout value calculation
  • From: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] reset: Instantiate reset GPIO controller for shared reset-gpios
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: clock: qcom,gcc-sm8150: Add gcc video resets for sm8150
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v14 2/4] Input: add core support for Goodix Berlin Touchscreen IC
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v2 3/3] clk: qcom: gcc-sm8150: Add gcc video resets for sm8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: clock: qcom,gcc-sm8150: Add gcc video resets for sm8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v2 1/3] clk: qcom: gcc-sm8150: Register QUPv3 RCGs for DFS on SM8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH v2 0/3] clk: qcom: Add dfs support for QUPv3 RCGs on SM8150
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH] coresight: Add coresight name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] coresight: Add coresight name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] coresight: Add coresight name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v5 5/5] PCI: qcom: Add OPP support to scale performance state of power domain
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [PATCH] coresight: Add coresight name support
  • From: Jinlong Mao <quic_jinlmao@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] arm64: dts: qcom: ipq6018: enable sdhci node
  • From: Chukun Pan <amadeus@xxxxxxxxxx>
• [PATCH RESEND v3] arm64: dts: qcom: qcs6490-idp: Add definition for three LEDs.
  • From: Hui Liu via B4 Relay <devnull+quic_huliu.quicinc.com@xxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qrb2210-rb1: disable cluster power domains
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] drm/msms/dp: fixed link clock divider bits be over written in BPC unknown case
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1] drm/msms/dp: fixed link clock divider bits be over written in BPC unknown case
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH v1] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] drm/msm/mdp5: drop split display support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 5/5] drm/msm/mdp5: drop split display support
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 4/5] drm/msm/dsi: remove msm_dsi::encoder
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 3/5] drm/msm/dsi: stop calling set_split_display
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 2/5] drm/msm/dsi: drop msm_dsi_device_connected() function
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH 1/5] drm/msm/dsi: do not store internal bridge pointer
  • From: Abhinav Kumar <quic_abhinavk@xxxxxxxxxxx>
• Re: [PATCH net-next 00/20] net: ethernet: Add qcom PPE driver
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• [PATCH v1] drm/msms/dp: fixed link clock divider bits be over written in BPC unknown case
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• [PATCH v1] drm/msm/dp: correct configure Colorimetry Indicator Field at MISC0
  • From: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
• Re: [RFC 3/9] PCI/portdrv: create platform devices for child OF nodes
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 11/12] usb: dwc3: qcom: Flatten the Qualcomm dwc3 binding and implementation
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: sm7225-fairphone-fp4: Add PM6150L thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: sm7225-fairphone-fp4: Add PMK8003 thermals
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>