Re: [PATCH] arm64: dts: Add/fix /memory node unit-addresses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/30/24 12:18, Rob Herring (Arm) wrote:
'/memory' nodes always have a 'reg' property, and therefore should have
a unit-address with just plain hex (i.e. no commas). Fix all the arm64
'/memory' nodes.

It's possible that some bootloader depends on /memory (arm32 ATAG to DT
code does for example). If so, the memory node should be commented with
that requirement.

Signed-off-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
---
SoC maintainers, please take this directly.

arm32 is much worse, but the platforms using ATAG to DT code can't be
changed and I don't know which ones those are.

  arch/arm64/boot/dts/actions/s700-cubieboard7.dts       | 2 +-
  arch/arm64/boot/dts/apm/apm-merlin.dts                 | 2 +-
  arch/arm64/boot/dts/apm/apm-mustang.dts                | 2 +-
  arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts    | 2 +-
  arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts    | 2 +-

For the above two:

Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
--
Florian





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux