Re: [PATCH 12/13] regulator: add pm8008 pmic regulator driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mon, May 06, 2024 at 05:08:29PM +0200, Johan Hovold kirjoitti:
> From: Satya Priya <quic_c_skakit@xxxxxxxxxxx>
> 
> Qualcomm Technologies, Inc. PM8008 is an I2C-controlled PMIC containing
> seven LDO regulators. Add a PM8008 regulator driver to support PMIC
> regulator management via the regulator framework.
> 
> Note that this driver, originally submitted by Satya Priya [1], has been
> reworked to match the new devicetree binding which no longer describes
> each regulator as a separate device.
> 
> This avoids describing internal details like register offsets in the
> devicetree and allows for extending the implementation with features
> like over-current protection without having to update the binding.
> 
> Specifically note that the regulator interrupts are shared between all
> regulators.
> 
> Note that the secondary regmap is looked up by name and that if the
> driver ever needs to be generalised to support regulators provided by
> the primary regmap (I2C address) such information could be added to a
> driver lookup table matching on the parent compatible.
> 
> This also fixes the original implementation, which looked up regulators
> by 'regulator-name' property rather than devicetree node name and which
> prevented the regulators from being named to match board schematics.

> [1] https://lore.kernel.org/r/1655200111-18357-8-git-send-email-quic_c_skakit@xxxxxxxxxxx

Make it Link: tag?

Link: URL [1]

...

> [ johan: rework probe to match new binding, amend commit message and
>          Kconfig entry]

Wouldn't be better on one line?

...

+ array_size.h
+ bits.h

> +#include <linux/device.h>

> +#include <linux/kernel.h>

What is this header for?

+ math.h

> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/driver.h>

+ asm/byteorder.h

...

> +static int pm8008_regulator_get_voltage(struct regulator_dev *rdev)
> +{
> +	struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev);
> +	__le16 mV;
> +	int uV;
> +
> +	regmap_bulk_read(pm8008_reg->regmap,
> +			LDO_VSET_LB_REG(pm8008_reg->base), (void *)&mV, 2);

Why casting?

> +	uV = le16_to_cpu(mV) * 1000;
> +	return (uV - pm8008_reg->rdesc.min_uV) / pm8008_reg->rdesc.uV_step;
> +}
> +
> +static inline int pm8008_write_voltage(struct pm8008_regulator *pm8008_reg,
> +							int mV)
> +{
> +	__le16 vset_raw;
> +
> +	vset_raw = cpu_to_le16(mV);

Can be joined to a single line.

> +	return regmap_bulk_write(pm8008_reg->regmap,
> +			LDO_VSET_LB_REG(pm8008_reg->base),
> +			(const void *)&vset_raw, sizeof(vset_raw));

Why casting?

> +}

...

> +static int pm8008_regulator_set_voltage(struct regulator_dev *rdev,
> +					unsigned int selector)
> +{
> +	struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev);
> +	int rc, mV;
> +
> +	rc = regulator_list_voltage_linear_range(rdev, selector);
> +	if (rc < 0)
> +		return rc;
> +
> +	/* voltage control register is set with voltage in millivolts */
> +	mV = DIV_ROUND_UP(rc, 1000);

> +	rc = pm8008_write_voltage(pm8008_reg, mV);
> +	if (rc < 0)
> +		return rc;
> +
> +	return 0;

	return pm8008_write_voltage(pm8008_reg, mV);

?

> +}

> +
> +	regmap = dev_get_regmap(dev->parent, "secondary");
> +	if (!regmap)
> +		return -EINVAL;
> +
> +	for (i = 0; i < ARRAY_SIZE(reg_data); i++) {
> +		pm8008_reg = devm_kzalloc(dev, sizeof(*pm8008_reg), GFP_KERNEL);
> +		if (!pm8008_reg)
> +			return -ENOMEM;
> +
> +		pm8008_reg->regmap = regmap;
> +		pm8008_reg->base = reg_data[i].base;
> +
> +		/* get slew rate */
> +		rc = regmap_bulk_read(pm8008_reg->regmap,
> +				LDO_STEPPER_CTL_REG(pm8008_reg->base), &val, 1);
> +		if (rc < 0) {
> +			dev_err(dev, "failed to read step rate: %d\n", rc);
> +			return rc;

			return dev_err_probe(...);

> +		}
> +		val &= STEP_RATE_MASK;
> +		pm8008_reg->step_rate = DEFAULT_VOLTAGE_STEPPER_RATE >> val;

> +		rdesc = &pm8008_reg->rdesc;
> +		rdesc->type = REGULATOR_VOLTAGE;
> +		rdesc->ops = &pm8008_regulator_ops;
> +		rdesc->name = reg_data[i].name;
> +		rdesc->supply_name = reg_data[i].supply_name;
> +		rdesc->of_match = reg_data[i].name;
> +		rdesc->uV_step = VSET_STEP_UV;
> +		rdesc->linear_ranges = reg_data[i].voltage_range;
> +		rdesc->n_linear_ranges = 1;
> +		BUILD_BUG_ON((ARRAY_SIZE(pldo_ranges) != 1) ||
> +				(ARRAY_SIZE(nldo_ranges) != 1));
> +
> +		if (reg_data[i].voltage_range == nldo_ranges) {
> +			rdesc->min_uV = NLDO_MIN_UV;
> +			rdesc->n_voltages = ((NLDO_MAX_UV - NLDO_MIN_UV) / rdesc->uV_step) + 1;
> +		} else {
> +			rdesc->min_uV = PLDO_MIN_UV;
> +			rdesc->n_voltages = ((PLDO_MAX_UV - PLDO_MIN_UV) / rdesc->uV_step) + 1;
> +		}
> +
> +		rdesc->enable_reg = LDO_ENABLE_REG(pm8008_reg->base);
> +		rdesc->enable_mask = ENABLE_BIT;
> +		rdesc->min_dropout_uV = reg_data[i].min_dropout_uv;
> +		rdesc->regulators_node = of_match_ptr("regulators");
> +
> +		reg_config.dev = dev->parent;
> +		reg_config.driver_data = pm8008_reg;
> +		reg_config.regmap = pm8008_reg->regmap;
> +
> +		rdev = devm_regulator_register(dev, rdesc, &reg_config);
> +		if (IS_ERR(rdev)) {

> +			rc = PTR_ERR(rdev);
> +			dev_err(dev, "failed to register regulator %s: %d\n",
> +					reg_data[i].name, rc);
> +			return rc;

			return dev_err_probe(...);

> +		}
> +	}
> +
> +	return 0;
> +}

...

> +static struct platform_driver pm8008_regulator_driver = {
> +	.driver	= {
> +		.name = "qcom-pm8008-regulator",
> +	},
> +	.probe = pm8008_regulator_probe,
> +};

> +

Unneeded blank line.

> +module_platform_driver(pm8008_regulator_driver);

...

> +MODULE_ALIAS("platform:qcom-pm8008-regulator");

Use ID table instead.

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux