Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
SNPS HS PHY on QDU1000/QRU1000 SoCs. Also add required pins for USB,
so that the interface can work reliably.
Co-developed-by: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
Signed-off-by: Amrit Anand <quic_amrianan@xxxxxxxxxxx>
Signed-off-by: Komal Bajaj <quic_kbajaj@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 120 ++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 832f472c4b7a..72ff94ce5ad4 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -6,6 +6,8 @@
#include <dt-bindings/clock/qcom,qdu1000-gcc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -913,6 +915,124 @@ opp-384000000 {
};
};
+ usb_1_hsphy: phy@88e3000 {
+ compatible = "qcom,qdu1000-usb-hs-phy",
+ "qcom,usb-snps-hs-7nm-phy";
+ reg = <0x0 0x088e3000 0x0 0x120>;
+ #phy-cells = <0>;
+
+ clocks =<&gcc GCC_USB2_CLKREF_EN>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_1_qmpphy: phy@88e5000 {
+ compatible = "qcom,qdu1000-qmp-usb3-uni-phy";
+ reg = <0x0 0x088e5000 0x0 0x2000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB2_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3PHY_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ #clock-cells = <0>;
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,qdu1000-dwc3", "qcom,dwc3";
+ reg = <0 0x0a6f8800 0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "sleep",
+ "mock_utmi";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <200000000>;
+
+ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_RISING>,
+ <&pdc 9 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "hs_phy_irq",
+ "ss_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ interconnects = <&system_noc MASTER_USB3 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &system_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
+
+ interconnect-names = "usb-ddr",
+ "apps-usb";
+
+ status = "disabled";
+
+ usb_1_dwc3: usb@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0 0x0a600000 0 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&apps_smmu 0xc0 0x0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>,
+ <&usb_1_qmpphy>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,qdu1000-pdc", "qcom,pdc";
reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>;
--
2.42.0
