This series adds devicetree nodes to support interconnects and usb for qdu/qru1000. This is based on previously sent driver series[1]. ------ Changes in v3: * As per comments on upstream[2], to get role-switch working on QDU/QRU1000, it was recommended to use the actual TI switch driver. Since driver doesn't have the functionality to provide role-switch based on gpio, thus reverting back USB dr_mode to peripheral and removed the remote end-point nodes and usb-conn-gpio based role switch functionality. * Link to v2: https://lore.kernel.org/linux-arm-msm/20240319091020.15137-1-quic_kbajaj@xxxxxxxxxxx/ Changes in v2: * Changes qmpphy node name * Changes dr_mode to otg and added USB-B port USB role switch * Dropped maximum-speed property from usb dwc3 node * Link to v1: https://lore.kernel.org/linux-arm-msm/20240311120859.18489-1-quic_kbajaj@xxxxxxxxxxx/ [1] https://lore.kernel.org/linux-arm-msm/20240502082017.13777-1-quic_kbajaj@xxxxxxxxxxx/ [2] https://lore.kernel.org/all/CAA8EJppNZrLzT=vGS0NXnKJT_wL+bMB9jFhJ9K7b7FPgFQbcig@xxxxxxxxxxxxxx/ ------ Komal Bajaj (3): arm64: dts: qcom: qdu1000: Add USB3 and PHY support arm64: dts: qcom: qdu1000-idp: enable USB nodes arm64: dts: qcom: qru1000-idp: enable USB nodes arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 23 +++++ arch/arm64/boot/dts/qcom/qdu1000.dtsi | 120 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/qru1000-idp.dts | 23 +++++ 3 files changed, 166 insertions(+) -- 2.42.0
