On Thu, 02 May 2024 14:33:23 +0530, Komal Bajaj wrote: > This series adds devicetree nodes to support interconnects and usb for qdu/qru1000. > This is based on previously sent driver series[1]. > > ------ > Changes in v3: > * As per comments on upstream[2], to get role-switch working on QDU/QRU1000, it was recommended to > use the actual TI switch driver. Since driver doesn't have the functionality to provide role-switch > based on gpio, thus reverting back USB dr_mode to peripheral and removed the remote end-point nodes > and usb-conn-gpio based role switch functionality. > * Link to v2: https://lore.kernel.org/linux-arm-msm/20240319091020.15137-1-quic_kbajaj@xxxxxxxxxxx/ > > [...] Applied, thanks! [1/3] arm64: dts: qcom: qdu1000: Add USB3 and PHY support commit: dd1bd5bf7420497aace9521d314f6c7e22f22118 [2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes commit: 00ea07cd1c884efe4b02a5a61794673054547488 [3/3] arm64: dts: qcom: qru1000-idp: enable USB nodes commit: 4d3fadbcd63372e9a1cd15701f882ece252437f4 Best regards, -- Bjorn Andersson <andersson@xxxxxxxxxx>
