Linux Device Tree

• Thread Index

• [PATCH v3 2/6] firmware: ti_sci: Partial-IO support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 0/6] firmware: ti_sci: Partial-IO support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 1/6] firmware: ti_sci: Support transfers without response
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v4 2/2] mmc: mtk-sd: add support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: mmc: mtk-sd: Add mt7988 SoC
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• [PATCH v4 0/2] Add mmc support for mt7988
  • From: Frank Wunderlich <linux@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: magnetometer: document the Allegro MicroSystems ALS31300 3-D Linear Hall Effect Sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] iio: light: veml6030: add support for veml7700
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/10] iio: dac: ad3552r: add high-speed platform driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [v3] riscv: dts: starfive: jh7110: Add camera subsystem nodes
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: phy: add realtek,rtl8380m-serdes
  • From: Markus Stockhausen <markus.stockhausen@xxxxxx>
• [PATCH v3 2/2] phy: Realtek Otto SerDes driver
  • From: Markus Stockhausen <markus.stockhausen@xxxxxx>
• [PATCH v3 0/2] phy: Realtek Otto SerDes: add new driver
  • From: Markus Stockhausen <markus.stockhausen@xxxxxx>
• Re: [PATCH v3 7/8] riscv: dts: thead: Add TH1520 pinctrl settings for UART0
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] riscv: dts: thead: Add Lichee Pi 4M GPIO line names
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH v5 01/10] iio: dac: adi-axi-dac: fix wrong register bitfield
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 8/8] iio: adc: ad7606: Disable PWM usage for non backend version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v5 0/3] iio: adc: add new ad7625 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 12/12] PCI: rockchip-ep: Handle PERST# signal in endpoint mode
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 10/12] PCI: rockchip-ep: Improve link training
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH linux dev-6.11 2/2] v3: dt-bindings: modified ina2xx to match SY24655
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 04/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 07/13] iio: chemical: bme680: add regulators
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 6/6] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 6/7] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 7/9] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 7/9] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 11/13] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 17/20] of/irq: Prevent device address out-of-bounds read in interrupt map walk
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH v3 7/7] arm64: dts: imx95-19x19-evk: add lpi2c[5,6] and sub-nodes
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 6/7] arm64: dts: imx95-19x19-evk: add nxp,ctrl-ids property
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 5/7] arm64: dts: imx95: enable A55 cpuidle
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 4/7] arm64: dts: imx95: add anamix temperature thermal zone and cooling node
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 3/7] arm64: dts: imx95: update a55 thermal trip points
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 2/7] arm64: dts: imx95: add bbm/misc/syspower scmi nodes
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 1/7] arm64: dts: imx95: set max-rx-timeout-ms
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• [PATCH v3 0/7] arm64: dts: imx95: add various nodes
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH linux dev-6.11 2/2] v3: dt-bindings: modified ina2xx to match SY24655
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH v3 04/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH v2 3/9] drm/bridge: fsl-ldb: Get the next non-panel bridge
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: media: nxp,imx8-isi: Add i.MX8ULP ISI compatible string
  • From: guoniu.zhou@xxxxxxxxxxx
• [PATCH v2 1/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: guoniu.zhou@xxxxxxxxxxx
• [PATCH v2 0/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: guoniu.zhou@xxxxxxxxxxx
• Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 5/9] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 1/3] mailbox: Introduce support for T-head TH1520 Mailbox driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 1/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node changes from MT6795 document
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH v6 6/8] dt-bindings: pinctrl: mediatek: Add bindings for MT6735 pin controller
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v2 9/9] MAINTAINERS: Add maintainer for ITE IT6263 driver
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 8/9] arm64: defconfig: Enable ITE IT6263 driver
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 7/9] arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 5/9] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 4/9] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 3/9] drm/bridge: fsl-ldb: Get the next non-panel bridge
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 2/9] arm64: dts: imx8mp-phyboard-pollux-rdk: Add panel-timing node to panel-lvds node
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 1/9] arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Add panel-timing node to panel node
  • From: Liu Ying <victor.liu@xxxxxxx>
• [PATCH v2 0/9] Add ITE IT6263 LVDS to HDMI converter support
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH v2 3/3] arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2 2/3] arm64: dts: qcom: x1e80100-crd: enable otg on usb ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 4/5] media: mediatek: vcodec: store current vb2 buffer to decode again
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v5 3/5] media: mediatek: vcodec: Get SRC buffer from bitstream instead of M2M
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v5 2/5] media: mediatek: vcodec: change flush decode order when stream off
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v5 5/5] media: mediatek: vcodec: remove media request checking
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v5 1/5] media: mediatek: vcodec: setting request complete before buffer done
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• [PATCH v5 0/5] media: mediatek: vcodec: fix v4l2_ctrl_request_complete fail
  • From: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
• Re: [PATCH v2 1/3] arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 4/8] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
  • From: Liu Ying <victor.liu@xxxxxxx>
• Re: [PATCH 5/5] clk: meson: add A5 clock peripherals controller driver
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH 4/5] clk: meson: add support for the A5 SoC PLL clock
  • From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
• Re: [PATCH v6 7/8] PCI: qcom: Fix the cfg for X1E80100 SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 6/8] PCI: qcom: Fix the ops for SC8280X family SoC
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v6 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• [PATCH v3] dt-bindings: phy: mediatek: tphy: add a property for power-domains
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: imx8mp: correct sdhc ipg clk
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 2/2] pwm: brcmstb: Do not assume open drain configuration
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: pwm: brcm,bcm7038: Document the 'open-drain' property
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH 0/2] pwm: brcmstb: Support configurable open-drain mode
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH] arm64: dts: imx8mp: correct sdhc ipg clk
  • From: "Peng Fan (OSS)" <peng.fan@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] pwm: sophgo: add driver for Sophgo SG2042 PWM
  • From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
• RE: [PATCH 1/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: "G.N. Zhou (OSS)" <guoniu.zhou@xxxxxxxxxxx>
• Re: [GIT PULL] Devicetree fixes for v6.12, part 1
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2 3/3] arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v2 1/3] arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: x1e80100-crd: enable otg on usb ports
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH net-next v3 0/3] net: xilinx: emaclite: Adopt clock support
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 1/1] Skip building dtc if a prebuilt binary is specified via DTC=
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v6 0/7] MediaTek DVFSRC Bus Bandwidth and Regulator knobs
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] Devicetree fixes for v6.12, part 1
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH V2 2/4] remoteproc: qcom: add hexagon based WCSS secure PIL driver
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: enable otg on usb ports
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH RFC 3/3] arm64: dts: qcom: x1e80100: Add ACD levels for GPU
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH RFC 2/3] dt-bindings: opp: Add v2-qcom-adreno vendor bindings
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH RFC 1/3] drm/msm/adreno: Add support for ACD
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• [PATCH RFC 0/3] Support for GPU ACD feature on Adreno X1-85
  • From: Akhil P Oommen <quic_akhilpo@xxxxxxxxxxx>
• Re: [PATCH v6 0/8] MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 4/4] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v6 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Deepak Gupta <debug@xxxxxxxxxxxx>
• Re: [PATCH V2 4/4] arm64: dts: qcom: ipq9574: add nodes to bring up q6
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH V2 3/4] arm64: dts: qcom: ipq5332: add nodes to bringup q6
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH 2/4] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24 bindings
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH V2 2/4] remoteproc: qcom: add hexagon based WCSS secure PIL driver
  • From: Jeff Johnson <quic_jjohnson@xxxxxxxxxxx>
• Re: [PATCH v1 0/3] pinctrl: th1520: Unbreak the driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 6/7] power: supply: max77705: Add fuel gauge driver for Maxim 77705
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 2/9] dt-bindings: can: m_can: Add vio-supply
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v3 3/9] can: m_can: Map WoL to device_set_wakeup_enable
  • From: Simon Horman <horms@xxxxxxxxxx>
• Re: [PATCH v1 07/13] iio: chemical: bme680: add regulators
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 02/13] iio: chemical: bme680: avoid using camel case
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 01/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v1 00/13]: chemical: bme680: 2nd set of clean and add
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH net-next v3 2/2] net: phy: aquantia: allow forcing order of MDI pairs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH net-next v3 2/2] net: phy: aquantia: allow forcing order of MDI pairs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH net-next v3 2/2] net: phy: aquantia: allow forcing order of MDI pairs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH net-next v3 2/2] net: phy: aquantia: allow forcing order of MDI pairs
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Vasileios Aoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v3 0/8] pinctrl: Add T-Head TH1520 SoC pin controllers
  • From: Drew Fustini <drew@xxxxxxxx>
• Re: [PATCH 4/4] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v6 6/8] dt-bindings: pinctrl: mediatek: Add bindings for MT6735 pin controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 1/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node changes from MT6795 document
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
  • From: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
• Re: [PATCH v1 3/3] pinctrl: th1520: Factor out casts
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 2/3] pinctrl: th1520: Update pinmux tables
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: st: add RNG node on stm32mp251
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 3/4] hwrng: stm32 - update STM32MP15 RNG max clock frequency
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v1 0/3] pinctrl: th1520: Unbreak the driver
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v3 6/6] arm64: dts: imx8qm-mek: enable dsp node for rproc usage
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 5/6] arm64: dts: imx8qm: add node for VPU dsp
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v3 4/6] arm64: dts: imx8qm: drop dsp node from audio_subsys bus
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 3/6] arm64: dts: imx8qxp-mek: add dsp rproc-related mem regions
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v3 2/6] arm64: dts: imx8-ss-audio: configure dsp node for rproc usage
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v2 1/4] dt-bindings: rng: add st,stm32mp25-rng support
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2 3/4] hwrng: stm32 - update STM32MP15 RNG max clock frequency
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: st: add RNG node on stm32mp251
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2 0/4] Add support for stm32mp25x RNG
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v2 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
• Re: [PATCH v3 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PATCH v2 6/6] arm64: dts: imx93: add ddr edac support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 5/6] EDAC/fsl_ddr: Add support for i.MX9 DDR controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 4/6] dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/6] EDAC/fsl_ddr: Fix bad bit shift operations
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 2/6] EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 1/6] EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/6] EDAC/fsl-ddr: Add imx9 support
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH 1/2] arm64: dts: qcom: x1e80100-crd: enable otg on usb ports
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v1 1/3] pinctrl: th1520: Fix pinconf return values
  • From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
• [PATCH 5/5] arm64: dts: qcom: x1e78100-t14s: add rtc offset to set rtc time
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH 4/5] arm64: dts: qcom: x1e80100-crd: add rtc offset to set rtc time
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH 2/5] dt-bindings: rtc: qcom-pm8xxx: document no-alarm flag
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• [PATCH 3/5] arm64: dts: qcom: x1e80100-pmics: enable RTC
  • From: Jonathan Marek <jonathan@xxxxxxxx>
• Re: [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH 0/7] of: Constify DT structs
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 6/7] of: Constify safe_name() kobject arg
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 5/7] of: Constify of_changeset_entry function arguments
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 4/7] of: Constify struct property pointers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: clock: Add i.MX91 clock definition
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: clock: Add i.MX91 clock definition
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/7] of: Constify struct device_node function arguments
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: clock: Add i.MX91 clock support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/7] logic_pio: Constify fwnode_handle
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 6/6] arm64: dts: imx8qm-mek: enable dsp node for rproc usage
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 5/6] arm64: dts: imx8qm: add node for VPU dsp
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 4/6] arm64: dts: imx8qm: drop dsp node from audio_subsys bus
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 3/6] arm64: dts: imx8qxp-mek: add dsp rproc-related mem regions
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 2/6] arm64: dts: imx8-ss-audio: configure dsp node for rproc usage
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: dsp: fsl,dsp: fix power domain count
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• [PATCH v3 0/6] configure imx8 dsp DT node for rproc usage
  • From: Laurentiu Mihalcea <laurentiumihalcea111@xxxxxxxxx>
• Re: [PATCH 2/7] logic_pio: Constify fwnode_handle
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/7] PCI: Constify pci_register_io_range() fwnode_handle
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: phy: mediatek: tphy: add a property for power-domains
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 8/8] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 7/8] arm64: dts: qcom: sc7280: Add support for camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/8] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 3/3] pinctrl: th1520: Factor out casts
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• [PATCH v1 2/3] pinctrl: th1520: Update pinmux tables
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• [PATCH v1 1/3] pinctrl: th1520: Fix pinconf return values
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• [PATCH v1 0/3] pinctrl: th1520: Unbreak the driver
  • From: Emil Renner Berthing <emil.renner.berthing@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: rtc: mpfs-rtc: remove Lewis from maintainers
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/9] dt-bindings: can: m_can: Add vio-supply
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/9] dt-bindings: can: m_can: Add wakeup properties
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: clock: Add i.MX91 clock definition
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: clock: Add i.MX91 clock support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Aw: Re: [PATCH v4 3/4] dt-bindings: pinctrl: add binding for MT7988 SoC
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 7/8] dt-bindings: arm: bcmbca: Add Genexis XG6846B
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 6/8] dt-bindings: vendor-prefixes: Add Genexis
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24 bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH] drm/panel: himax-hx83102: Adjust power and gamma to optimize brightness
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v6 2/4] media: dt-bindings: Add OmniVision OV08X40
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 8/8] arm64: dts: qcom: qcs6490-rb3gen2-vision-mezzanine: Add vision mezzanine
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 7/8] arm64: dts: qcom: sc7280: Add support for camss
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 6/8] media: qcom: camss: Restructure camss_link_entities
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 5/8] media: qcom: camss: Add support for camss driver on SC7280
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 4/8] media: qcom: camss: Sort CAMSS version enums and compatible strings
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 3/8] media: qcom: camss: Fix potential crash if domain attach fails
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 2/8] media: dt-bindings: Add qcs6490-rb3gen2-vision-mezzanine
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 1/8] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH v3 0/8] media: qcom: camss: Add sc7280 support
  • From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
• [PATCH 1/1] Skip building dtc if a prebuilt binary is specified via DTC=
  • From: Jes Sorensen <jes.sorensen@xxxxxxxxx>
• [RFC PATCH 0/1] Only build dtc when DTC= is not set on the command line
  • From: Jes Sorensen <jes.sorensen@xxxxxxxxx>
• [PATCH v10 3/3] dt-bindings: PCI: microchip,pcie-host: allow dma-noncoherent
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• [PATCH v10 0/3] Fix address translations on MPFS PCIe controller
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• [PATCH v10 2/3] PCI: microchip: Fix inbound address translation tables
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• [PATCH v10 1/3] PCI: microchip: Fix outbound address translation tables
  • From: <daire.mcnamara@xxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] iio: adc: ad485x: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2] firmware: arm_scmi: Give SMC transport precedence over mailbox
  • From: Cristian Marussi <cristian.marussi@xxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 7/8] PCI: qcom: Fix the cfg for X1E80100 SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v6 6/8] PCI: qcom: Fix the ops for SC8280X family SoC
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 9/9] arm64: dts: ti: k3-am62p-mcu: Mark mcu_mcan0/1 as wakeup-source
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 8/9] arm64: dts: ti: k3-am62a-mcu: Mark mcu_mcan0/1 as wakeup-source
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 7/9] arm64: dts: ti: k3-am62: Mark mcu_mcan0/1 as wakeup-source
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 6/9] can: m_can: Add use of optional regulator
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 5/9] can: m_can: Support pinctrl wakeup state
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 4/9] can: m_can: Return ERR_PTR on error in allocation
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 3/9] can: m_can: Map WoL to device_set_wakeup_enable
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 2/9] dt-bindings: can: m_can: Add vio-supply
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 1/9] dt-bindings: can: m_can: Add wakeup properties
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• [PATCH v3 0/9] can: m_can: Add am62 wakeup support
  • From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Aw: Re: [PATCH v4 4/4] arm64: dts: mediatek: mt7988: add pinctrl support
  • From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] dt-bindings: rtc: mpfs-rtc: remove Lewis from maintainers
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: dac: adi-axi-dac: add registering of child fdt node
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 7/7] Documentation: ABI: testing: ad485x: add ABI docs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v4 12/12] PCI: rockchip-ep: Handle PERST# signal in endpoint mode
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 11/12] PCI: rockchip-ep: Improve link training
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 10/12] PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 09/12] PCI: rockchip-ep: Refactor endpoint link training enable
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 08/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 06/12] PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 05/12] PCI: rockchip-ep: Implement the pci_epc_ops::get_mem_map() operation
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 04/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 03/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 02/12] PCI: rockchip-ep: Use a macro to define EP controller .align feature
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 00/12] Fix and improve the Rockchip endpoint driver
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• [PATCH v4 01/12] PCI: rockchip-ep: Fix address translation unit programming
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v6 8/8] pinctrl: mediatek: Add MT6735 pinctrl driver
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 6/8] dt-bindings: pinctrl: mediatek: Add bindings for MT6735 pin controller
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 7/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin controller
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 5/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin controller
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 4/8] arm64: dts: mediatek: mt6797: Make pin configuration nodes follow DT bindings
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 3/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 2/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode and property descriptions
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 1/8] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Pull pinctrl node changes from MT6795 document
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• [PATCH v6 0/8] MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support
  • From: Yassine Oudjana <yassine.oudjana@xxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
  • From: Krishna Chaitanya Chundru <quic_krichai@xxxxxxxxxxx>
• Re: [PATCH v6 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH v6 6/7] power: supply: max77705: Add fuel gauge driver for Maxim 77705
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2 6/7] iio: adc: ad485x: add ad485x driver
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Kalle Valo <kvalo@xxxxxxxxxx>
• Re: [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: "Christopher Snowhill" <kode54@xxxxxxxxx>
• Re: [PATCH 4/8] drm/bridge: fsl-ldb: Use clk_round_rate() to validate "ldb" clock rate
  • From: Maxime Ripard <mripard@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
  • From: Chintan Vankar <c-vankar@xxxxxx>
• [PATCH v2] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
  • From: Chintan Vankar <c-vankar@xxxxxx>
• Re: [PATCH] dt-bindings: rtc: mpfs-rtc: remove Lewis from maintainers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 6/8] PCI: qcom: Fix the ops for SC8280X family SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v6 4/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v6 2/8] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v3 2/2] watchdog: Add support for Airoha EN7851 watchdog
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v6 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH] arm64: dts: qcom: qcs615: Add LLCC support for QCS615
  • From: Song Xue <quic_songxue@xxxxxxxxxxx>
• [PATCH v6 3/8] dt-bindings: PCI: qcom,pcie-x1e80100: Add 'global' interrupt
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v6 0/8] Add support for PCIe3 on x1e80100
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v1 00/13]: chemical: bme680: 2nd set of clean and add
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 7/8] PCI: qcom: Fix the cfg for X1E80100 SoC
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v6 8/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• [PATCH v6 5/8] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks
  • From: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
• Re: [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: rtc: mpfs-rtc: Properly name file
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v1] arm64: dts: qcom: qcs615: Add QUPv3 configuration
  • From: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
• Re: [PATCH v3 08/12] arm64: dts: renesas: r9a08g045: Add RTC node
  • From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
• [PATCH v10 3/3] riscv: dts: allwinner: d1: Add pwm node
  • From: Aleksandr Shubin <privatesub2@xxxxxxxxx>
• [PATCH v10 2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
  • From: Aleksandr Shubin <privatesub2@xxxxxxxxx>
• [PATCH v10 1/3] dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM controller
  • From: Aleksandr Shubin <privatesub2@xxxxxxxxx>
• [PATCH v10 0/3] Add support for Allwinner PWM on D1/T113s/R329 SoCs
  • From: Aleksandr Shubin <privatesub2@xxxxxxxxx>
• Re: [PATCH 6/7] iio: adc: ad485x: add ad485x driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: media: nxp,imx8-isi: Add i.MX8ULP ISI compatible string
  • From: guoniu.zhou@xxxxxxxxxxx
• [PATCH 1/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: guoniu.zhou@xxxxxxxxxxx
• [PATCH 0/2] media: nxp: imx8-isi: Add i.MX8ULP support
  • From: guoniu.zhou@xxxxxxxxxxx
• Re: [PATCH v6 0/3] Add Samsung s2dos05 pmic support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq
  • From: Stephan Gerhold <stephan.gerhold@xxxxxxxxxx>
• Re: [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: (subset) [linux][PATCH v2 13/20] dt-bindings: rtc: mfps-rtc: Add PIC64GX compatibility
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• RE: [PATCH v3 2/2] irqchip/aspeed-intc: Add support for AST27XX INTC
  • From: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: rtc: mpfs-rtc: Properly name file
  • From: alexandre.belloni@xxxxxxxxxxx
• Re: [PATCH v1 07/13] iio: chemical: bme680: add regulators
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  • From: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] hwrng: stm32 - implement support for STM32MP25x platforms
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 02/13] iio: chemical: bme680: avoid using camel case
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v1 01/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
  • From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
• [PATCH] arm64: dts: ti: k3-am62x-sk-common: Add bootph-all property in cpsw_mac_syscon node
  • From: Chintan Vankar <c-vankar@xxxxxx>
• Re: [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• Re: [PATCH v3 12/12] PCI: rockchip-ep: Handle PERST# signal in endpoint mode
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Jonas Karlman <jonas@xxxxxxxxx>
• Re: [PATCH v3 10/12] PCI: rockchip-ep: Improve link training
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v3 08/12] PCI: rockchip-ep: Refactor endpoint link training enable
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v3 07/12] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v3 03/12] PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  • From: Damien Le Moal <dlemoal@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v5 06/10] iio: dac: adi-axi-dac: extend features
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: "Diederik de Haas" <didi.debian@xxxxxxxxx>
• RE: [PATCH v2] arm64: dts: renesas: r9a09g057: Add OPP table
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: renesas: r9a09g057: Add OPP table
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 10/10] uapi: linux: add mediatek isp_7x camsys user api
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v2 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH v2 0/2] Add Devicetree support for USB controllers on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• RE: [PATCH v2] arm64: dts: renesas: r9a09g057: Add OPP table
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v4 0/4] leds: bcm63138: Add some new bindings and code
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH] drm/panel: himax-hx83102: Adjust power and gamma to optimize brightness
  • From: cong yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Emil Gedenryd <Emil.Gedenryd@xxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Mukesh Ojha <quic_mojha@xxxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: neil.armstrong@xxxxxxxxxx
• Re: [PATCH] drm/panel: himax-hx83102: Adjust power and gamma to optimize brightness
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: phy: mediatek: tphy: add a property for power-domains
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 4/8] ARM: dts: bcm6846: Add MDIO control block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v5 3/3] phy: rockchip: inno-usb2: Add usb2 phys support for rk3576
  • From: Frank Wang <frawang.cn@xxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: phy: rockchip,inno-usb2phy: add rk3576
  • From: Frank Wang <frawang.cn@xxxxxxxxx>
• [PATCH v5 1/3] phy: rockchip: inno-usb2: convert clock management to bulk
  • From: Frank Wang <frawang.cn@xxxxxxxxx>
• Re: [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: firmware: qcom,scm: document SCM on QCS615
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v2] dt-bindings: phy: mediatek: tphy: add a property for power-domains
  • From: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: arm-smmu: Document Qualcomm QCS615 apps smmu
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G
  • From: Johan Hovold <johan@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: qcs615: add the APPS SMMU node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 3/4] arm64: dts: qcom: qcs615: add scm node
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: arm-smmu: Document Qualcomm QCS615 apps smmu
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: firmware: qcom,scm: document SCM on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• [PATCH 0/4] Add support for APPS SMMU on QCS615
  • From: Qingqing Zhou <quic_qqzhou@xxxxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] pinctrl: qcom: add the tlmm driver for QCS8300 platforms
  • From: Jingyi Wang <quic_jingyw@xxxxxxxxxxx>
• Re: [PATCH v6 33/33] kselftest/riscv: kselftest for user mode cfi
  • From: Zong Li <zong.li@xxxxxxxxxx>
• Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/6] remoteproc: qcom: Enable map/unmap and SHM bridge support
  • From: Shiraz Hashim <quic_shashim@xxxxxxxxxxx>
• Re: [PATCH v8 1/4] iio: pressure: bmp280: Use sleep and forced mode for oneshot captures
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v1 01/10] dt-bindings: media: mediatek: add camsys device
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v4 3/3] dt-bindings: mmc: mtk-sd: Add support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v4 2/3] mmc: mtk-sd: Add support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v4 1/3] mmc: mtk-sd: Add stop_dly_sel and pop_en_cnt to platform data
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add mtk-sd support for MT8196
  • From: Andy-ld Lu <andy-ld.lu@xxxxxxxxxxxx>
• Re: [PATCH v1 02/10] media: platform: mediatek: add seninf controller
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH v6 5/5] arm64: dts: qcom: sdm670: add camss and cci
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v6 4/5] arm64: dts: qcom: sdm670: add camcc
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v6 3/5] media: qcom: camss: add support for SDM670 camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v6 2/5] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v6 0/5] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH v1 04/10] media: platform: mediatek: add isp_7x cam-raw unit
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• [PATCH] drm/panel: himax-hx83102: Adjust power and gamma to optimize brightness
  • From: Cong Yang <yangcong5@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH net-next 07/11] PCI: Add NXP NETC vendor ID and device IDs
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH 2/2] serial: 8250_dw: Add Sophgo SG2044 quirk
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• RE: [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Wei Fang <wei.fang@xxxxxxx>
• RE: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Wei Fang <wei.fang@xxxxxxx>
• Re: [PATCH v1 02/10] media: platform: mediatek: add seninf controller
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH v1 01/10] dt-bindings: media: mediatek: add camsys device
  • From: CK Hu (胡俊光) <ck.hu@xxxxxxxxxxxx>
• Re: [PATCH 1/2] media: i2c: Add AR0233 camera sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Inochi Amaoto <inochiama@xxxxxxxxx>
• Re: [PATCH v3 2/3] mmc: mtk-sd: Add two settings in platdata
  • From: Andy-ld Lu (卢东) <Andy-ld.Lu@xxxxxxxxxxxx>
• Re: [PATCH 0/2] serial: 8250_dw: Introduce SG2044 uart support.
  • From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
  • From: Chen Wang <unicorn_wang@xxxxxxxxxxx>
• Re: [PATCH v6 2/2] mtd: rawnand: nuvoton: add new driver for the Nuvoton MA35 SoC
  • From: Hui-Ping Chen <hpchen0nvt@xxxxxxxxx>
• RE: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v28 28/32] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 29/33] ALSA: usb-audio: qcom: Introduce QC USB SND offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 00/33] Introduce QC USB SND audio offloading support
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 18/32] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 24/32] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 30/32] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 20/33] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 21/32] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 30/33] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 27/32] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 28/33] ALSA: usb-audio: qcom: Add USB QMI definitions
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 33/33] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 31/33] ALSA: usb-audio: Add USB offload route kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 15/32] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 31/32] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 25/33] ASoC: qcom: qdsp6: Add headphone jack for offload connection status
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 32/32] ASoC: usb: Rediscover USB SND devices on USB port add
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 32/33] ALSA: usb-audio: Allow for rediscovery of connected USB SND devices
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/32] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/33] ASoC: qcom: qdsp6: Introduce USB AFE port to q6dsp
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 27/33] ALSA: usb-audio: Introduce USB SND platform op callbacks
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 26/33] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/32] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/33] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 29/32] ALSA: usb-audio: qcom: Don't allow USB offload path if PCM device is in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/32] ASoC: usb: Create SOC USB SND jack kcontrol
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/33] ASoC: doc: Add documentation for SOC USB
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 23/33] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 22/32] ASoC: qcom: qdsp6: q6afe: Increase APR timeout
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 19/32] ASoC: dt-bindings: qcom,q6dsp-lpass-ports: Add USB_RX port
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 25/32] ASoC: qcom: qdsp6: Fetch USB offload mapped card and PCM device
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/33] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 24/33] ASoC: qcom: qdsp6: Add USB backend ASoC driver for Q6
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 18/33] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/33] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/33] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 20/32] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 14/32] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/33] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 21/33] ASoC: dt-bindings: Update example for enabling USB offload on SM8250
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/32] xhci: sideband: add initial api to register a sideband entity
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/33] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 15/33] ASoC: Add SOC USB APIs for adding an USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 16/33] ASoC: usb: Add PCM format check API for USB backend
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 17/32] ASoC: usb: Fetch ASoC card and pcm device information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 10/32] ALSA: usb-audio: Export USB SND APIs for modules
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/33] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/33] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/32] xhci: add helper to stop endpoint and wait for completion
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/32] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/33] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 13/32] ALSA: usb-audio: Prevent starting of audio stream if in use
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/33] usb: dwc3: Specify maximum number of XHCI interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/33] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 09/32] ALSA: Add USB audio device jack type
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 08/33] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 04/32] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 06/32] usb: host: xhci-mem: Allow for interrupter clients to choose specific index
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/32] usb: host: xhci-mem: Cleanup pending secondary event ring events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 05/33] usb: xhci: xhci-sideband: Set IMOD for xHCI sideband clients
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 11/32] ALSA: usb-audio: Check for support for requested audio format
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 12/32] ALSA: usb-audio: Save UAC sample size information
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 03/33] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 07/32] usb: host: xhci-plat: Set XHCI max interrupters if property is present
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 02/32] usb: host: xhci: Repurpose event handler for skipping interrupter events
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• [PATCH v28 01/33] xhci: support setting interrupt moderation IMOD for secondary interrupters
  • From: Wesley Cheng <quic_wcheng@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Sam Edwards <cfsworks@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: arm: aspeed: add IBM SBP1 board
  • From: Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: arm: bcm2835: Specify /system/linux,revision property
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 13/18] dt-bindings: usb-switch: Extend for DisplayPort altmode
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH 4/8] ARM: dts: bcm6846: Add MDIO control block
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 1/7] PCI: Constify pci_register_io_range() fwnode_handle
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH 8/8] ARM: dts: broadcom: Add Genexis XG6846B DTS file
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 7/8] dt-bindings: arm: bcmbca: Add Genexis XG6846B
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/8] dt-bindings: vendor-prefixes: Add Genexis
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/8] ARM: dts: bcm6846: Add GPIO blocks
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/8] ARM: dts: bcm6846: Add LED controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/8] ARM: dts: bcm6846: Add MDIO control block
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/8] ARM: dts: bcm6846: Add iproc rng
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/8] ARM: dts: bcm6846: Enable watchdog
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/8] ARM: dts: Add some BCM6846 device tree
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/3] of: address: Add parent_bus_addr to struct of_pci_range
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 5/5] arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G
  • From: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx>
• [PATCH v1 13/13] iio: chemical: bme680: Add support for preheat current
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 12/13] iio: chemical: bme680: Add triggered buffer support
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 11/13] iio: chemical: bme680: Add SCALE and RAW channels
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 10/13] iio: chemical: bme680: generalize read_*() functions
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 09/13] iio: chemical: bme680: Move ambient temperature to attributes
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 08/13] iio: chemical: bme680: add power management
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 07/13] iio: chemical: bme680: add regulators
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 06/13] dt-bindings: iio: add binding for BME680 driver
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 05/13] iio: chemical: bme680: refactorize set_mode() mode
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 04/13] iio: chemical: bme680: move to fsleep()
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 03/13] iio: chemical: bme680: fix startup time
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 02/13] iio: chemical: bme680: avoid using camel case
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 01/13] iio: chemical: bme680: Fix indentation and unnecessary spaces
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• [PATCH v1 00/13]: chemical: bme680: 2nd set of clean and add
  • From: vamoirid <vassilisamir@xxxxxxxxx>
• Re: [PATCH v6 6/7] power: supply: max77705: Add fuel gauge driver for Maxim 77705
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 00/14] Fixing some dtbscheck warnings
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 3/4] ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 2/4] ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• Re: [PATCH v2 1/4] ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
  • From: Roger Quadros <rogerq@xxxxxxxxxx>
• [PATCH v9 2/7] iommu/riscv: Add RISC-V IOMMU platform device driver
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 7/7] iommu/riscv: Paging domain support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 6/7] iommu/riscv: Command and fault queue support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 5/7] iommu/riscv: Device directory management.
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 4/7] iommu/riscv: Enable IOMMU registration and device probe.
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 3/7] iommu/riscv: Add RISC-V IOMMU PCIe device driver
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 1/7] dt-bindings: iommu: riscv: Add bindings for RISC-V IOMMU
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• [PATCH v9 0/7] Linux RISC-V IOMMU Support
  • From: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH net-next 07/11] PCI: Add NXP NETC vendor ID and device IDs
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH v5 3/8] dt-bindings: clock: qcom: Add SA8775P camera clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 1/8] dt-bindings: clock: qcom: Add SA8775P video clock controller
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v9 1/6] misc: Add support for LAN966x PCI device
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH net-next 11/11] MAINTAINERS: update ENETC driver files and maintainers
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v5 4/8] clk: qcom: Add support for Camera Clock Controller on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 4/4] drm/panel: samsung-s6e88a0-ams427ap24: Add flip option
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH v5 6/8] clk: qcom: Add support for Display clock Controllers on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• Re: [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v5 8/8] arm64: dts: qcom: Add support for multimedia clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 7/8] arm64: dts: qcom: Update sleep_clk frequency to 32000 on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 5/8] dt-bindings: clock: qcom: Add SA8775P display clock controllers
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 0/8] Add support for videocc, camcc, dispcc0 and dispcc1 on Qualcomm SA8775P platform.
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH v5 2/8] clk: qcom: Add support for Video clock controller on SA8775P
  • From: Taniya Das <quic_tdas@xxxxxxxxxxx>
• [PATCH 3/4] drm/panel: samsung-s6e88a0-ams427ap24: Add brightness control
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 2/4] drm/panel: samsung-s6e88a0-ams427ap24: Add initial driver
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: display: panel: Add Samsung S6E88A0-AMS427AP24 bindings
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• [PATCH 0/4] Add new panel driver Samsung S6E88A0-AMS427AP24
  • From: Jakob Hauser <jahau@xxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: arm: Add support for Coresight TGU trace
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 4/4] leds: bcm63138: Add some register defines
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v3 09/10] iio: adc: ad7606: Add iio-backend support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v11 1/8] spi: dt-bindings: Introduce qcom,spi-qpic-snand
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 net-next 1/2] dt-bindings: net: tja11xx: add "nxp,rmii-refclk-out" property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/4] leds: bcm63138: Handle shift register config
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v4 1/4] dt-bindings: leds: bcm63138: Add shift register bits
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: dac: adi-axi-dac: update register names
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: light: opt3001: add support for TI's opt3002 light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] of: Skip kunit tests when arm64+ACPI doesn't populate root node
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/3] ARM: dts: imx[6qdl|7]-[apalis|colibri]: Update audio card names
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Trevor Woerner <twoerner@xxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: imx7-colibri: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 2/3] ARM: dts: imx6qdl-colibri: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 1/3] ARM: dts: imx6qdl-apalis: Update audio card name
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• [PATCH v2 0/3] ARM: dts: imx[6qdl|7]-[apalis|colibri]: Update audio card names
  • From: Hiago De Franco <hiagofranco@xxxxxxxxx>
• Re: [PATCH net-next 05/11] net: enetc: add enetc-pf-common driver support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 6/7] iio: adc: ad485x: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• [PATCH 0/7] of: Constify DT structs
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: Enable USB controllers for QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH 1/7] PCI: Constify pci_register_io_range() fwnode_handle
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH 7/7] of/address: Constify of_busses[] array and pointers
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 6/7] of: Constify safe_name() kobject arg
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 5/7] of: Constify of_changeset_entry function arguments
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 05/12] dt-bindings: rtc: renesas,rzg3s-rtc: Document the Renesas RTCA-3 IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 4/7] of: Constify struct property pointers
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 3/7] of: Constify struct device_node function arguments
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 2/7] logic_pio: Constify fwnode_handle
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v5 3/5] mfd: airoha: Add support for Airoha EN7581 MFD
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: interrupt-controller: Add Sophgo SG2044 ACLINT SSWI
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 1/6] EDAC: fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Prevent thermal runaways in RK3308 SoC dtsi
  • From: Dragan Simic <dsimic@xxxxxxxxxxx>
• [PATCH v2 2/5] dt-bindings: backlight: convert zii,rave-sp-backlight.txt to yaml
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v2 0/7] clk: en7523: Update register mapping for EN7581
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 5/5] dt-bindings: mfd: convert zii,rave-sp.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 4/5] dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 3/5] dt-bindings: nvmem: convert zii,rave-sp-eeprom.txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH 2/2] serial: 8250_dw: Add Sophgo SG2044 quirk
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/5] dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v2 0/5] dt-bindings: mfd: convert zii,rave-sp.txt and child txt to yaml format
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v3 0/2] arm64: dts: ti: k3-j784s4: Mark tps659413 regulators as bootph-all
  • From: Beleswar Prasad Padhi <b-padhi@xxxxxx>
• Re: [PATCH 0/1] Add RV1126 compatible watchdog string
  • From: karthikeyan <karthikeyan@xxxxxxxxxxx>
• Re: [PATCH 1/6] EDAC: fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32()
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• Re: [PATCH v3 12/12] arm64: defconfig: Enable Renesas RTCA-3 flag
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 10/12] arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 11/12] arm64: defconfig: Enable VBATTB clock
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 09/12] arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/3] arm64: dts: qcom: sm8250-xiaomi-elish: Add wifi node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH net-next 10/11] net: enetc: add preliminary support for i.MX95 ENETC PF
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v3 08/12] arm64: dts: renesas: r9a08g045: Add RTC node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 07/12] arm64: dts: renesas: r9a08g045: Add VBATTB node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH net-next 02/11] dt-bindings: net: add i.MX95 ENETC support
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 2/2] riscv: dts: sophgo: Add LicheeRV Nano board device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 1/2] riscv: dts: sophgo: Add initial SG2002 SoC device tree
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH v5 0/2] Add board support for Sipeed LicheeRV Nano
  • From: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
• [PATCH] arm64: dts: broadcom: Fix L2 linesize for Raspberry Pi 5
  • From: Willow Cunningham <willow.e.cunningham@xxxxxxxxx>
• RE: [PATCH v8 2/2] iio: imu: smi240: add driver
  • From: "Shen Jianping (ME-SE/EAD2)" <Jianping.Shen@xxxxxxxxxxxx>
• RE: [PATCH v6 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH 1/2] arm64: dts: qcom: Add support for usb nodes on QCS8300
  • From: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
• Re: [PATCH v3 0/2] arm64: dts: ti: k3-j784s4: Mark tps659413 regulators as bootph-all
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: serial: snps-dw-apb-uart: Add Sophgo SG2044 uarts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• RE: [PATCH v5 3/3] drivers: iio: adc: add support for ad777x family
  • From: "Nechita, Ramona" <Ramona.Nechita@xxxxxxxxxx>
• Re: [PATCH v8 1/2] dt-bindings: arm: Document the btt3 i.MX28 based board
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 11/11] arm64: dts: st: add DMA support on SPI instances of stm32mp25
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 05/11] dmaengine: stm32-dma3: prevent LL refactoring thanks to DT configuration
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 04/11] dt-bindings: dma: stm32-dma3: prevent linked-list refactoring
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 03/11] dmaengine: stm32-dma3: refactor HW linked-list to optimize memory accesses
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 01/11] dt-bindings: dma: stm32-dma3: prevent packing/unpacking mode
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 02/11] dmaengine: stm32-dma3: prevent pack/unpack thanks to DT configuration
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 06/11] dt-bindings: dma: stm32-dma3: introduce st,axi-max-burst-len property
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
• [PATCH 07/11] dmaengine: stm32-dma3: clamp AXI burst using st,axi-max-burst-len
  • From: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>