The iio_dmaengine_buffer_setup_ext() function is public and should be
documented. Also, while touching this, fix the description of @dev in
related functions. @dev does not strictly have to be the parent of the
IIO device. It is only passed to dma_request_chan() so strictly
speaking, it can be any device that is a valid DMA channel consumer.
Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
---
v5 changes: none
v4 changes:
* This patch is new in v4.
Jonathan, I think this patch stands on its own if you want to take it
earlier than the rest of this series.
---
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/buffer/industrialio-buffer-dmaengine.c b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
index 19af1caf14cd..054af21dfa65 100644
--- a/drivers/iio/buffer/industrialio-buffer-dmaengine.c
+++ b/drivers/iio/buffer/industrialio-buffer-dmaengine.c
@@ -206,7 +206,7 @@ static const struct iio_dev_attr *iio_dmaengine_buffer_attrs[] = {
/**
* iio_dmaengine_buffer_alloc() - Allocate new buffer which uses DMAengine
- * @dev: Parent device for the buffer
+ * @dev: DMA channel consumer device
* @channel: DMA channel name, typically "rx".
*
* This allocates a new IIO buffer which internally uses the DMAengine framework
@@ -288,6 +288,21 @@ void iio_dmaengine_buffer_free(struct iio_buffer *buffer)
}
EXPORT_SYMBOL_NS_GPL(iio_dmaengine_buffer_free, IIO_DMAENGINE_BUFFER);
+/**
+ * iio_dmaengine_buffer_setup_ext() - Setup a DMA buffer for an IIO device
+ * @dev: DMA channel consumer device
+ * @indio_dev: IIO device to which to attach this buffer.
+ * @channel: DMA channel name, typically "rx".
+ * @dir: Direction of buffer (in or out)
+ *
+ * This allocates a new IIO buffer with devm_iio_dmaengine_buffer_alloc()
+ * and attaches it to an IIO device with iio_device_attach_buffer().
+ * It also appends the INDIO_BUFFER_HARDWARE mode to the supported modes of the
+ * IIO device.
+ *
+ * Once done using the buffer iio_dmaengine_buffer_free() should be used to
+ * release it.
+ */
struct iio_buffer *iio_dmaengine_buffer_setup_ext(struct device *dev,
struct iio_dev *indio_dev,
const char *channel,
@@ -321,7 +336,7 @@ static void __devm_iio_dmaengine_buffer_free(void *buffer)
/**
* devm_iio_dmaengine_buffer_setup_ext() - Setup a DMA buffer for an IIO device
- * @dev: Parent device for the buffer
+ * @dev: Device for devm ownership and DMA channel consumer device
* @indio_dev: IIO device to which to attach this buffer.
* @channel: DMA channel name, typically "rx".
* @dir: Direction of buffer (in or out)
--
2.43.0
