Hello Jimmy, On Mon, Nov 11, 2024 at 6:01 AM Jimmy Hon <honyuenkwun@xxxxxxxxx> wrote: > > The RK3588 Single Board Computer includes > - eMMC > - microSD > - UART > - 2 PWM LEDs > - RTC > - RTL8125 network controller on PCIe 2.0x1. > - M.2 M-key connector routed to PCIe 3.0x4 > - PWM controlled heat sink fan. > - 2 USB2 ports > - lower USB3 port > - upper USB3 port with OTG capability > - Mali GPU > - SPI NOR flash > - Mask Rom button > - Analog audio using es8388 codec via the headset jack and onboard mic > - HDMI0 in your v1 patch series you mentioned you do not have access to EMMC to test. I am happy to test EMMC, but I had problems with the v2 and v3 patches. v2 dts did not compile and I was getting errors for the hdmi0 entries like "Label or path hdmi0 not found". I assume I am missing patches. After removing it compiles but the board does not boot. v3 patches don't work against 6.12-rc6/rc7 snapshot. The patch that modifies the 5 plus dts fails. I again assume I am missing other patches. If you have some info with which kernel or other modifications I can use your patches, then I am happy to do some testing. Cheers, Marco
