On Fri, Nov 15, 2024 at 11:21:48PM +0530, Manivannan Sadhasivam wrote:
> On Tue, Oct 29, 2024 at 12:36:35PM -0400, Frank Li wrote:
>
> Please reword the subject as:
>
> PCI: dwc: Use devicetree 'ranges' property to get rid of cpu_addr_fixup() callback
>
> > parent_bus_addr in struct of_range can indicate address information just
> > ahead of PCIe controller. Most system's bus fabric use 1:1 map between
> > input and output address. but some hardware like i.MX8QXP doesn't use 1:1
> > map. See below diagram:
> >
> > ┌─────────┐ ┌────────────┐
> > ┌─────┐ │ │ IA: 0x8ff8_0000 │ │
> > │ CPU ├───►│ ┌────►├─────────────────┐ │ PCI │
> > └─────┘ │ │ │ IA: 0x8ff0_0000 │ │ │
> > CPU Addr │ │ ┌─►├─────────────┐ │ │ Controller │
> > 0x7ff8_0000─┼───┘ │ │ │ │ │ │
> > │ │ │ │ │ │ │ PCI Addr
> > 0x7ff0_0000─┼──────┘ │ │ └──► IOSpace ─┼────────────►
> > │ │ │ │ │ 0
> > 0x7000_0000─┼────────►├─────────┐ │ │ │
> > └─────────┘ │ └──────► CfgSpace ─┼────────────►
> > BUS Fabric │ │ │ 0
> > │ │ │
> > └──────────► MemSpace ─┼────────────►
> > IA: 0x8000_0000 │ │ 0x8000_0000
> > └────────────┘
> >
> > bus@5f000000 {
> > compatible = "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x80000000 0x0 0x70000000 0x10000000>;
> >
> > pcie@5f010000 {
> > compatible = "fsl,imx8q-pcie";
> > reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
> > reg-names = "dbi", "config";
> > #address-cells = <3>;
> > #size-cells = <2>;
> > device_type = "pci";
> > bus-range = <0x00 0xff>;
> > ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
> > <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
> > ...
> > };
> > };
> >
> > Term internal address (IA) here means the address just before PCIe
> > controller. After ATU use this IA instead CPU address, cpu_addr_fixup() can
> > be removed.
> >
> > Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> > ---
> > Add a resource_size_t parent_bus_addr local varible to fix 32bit build
> > error.
> > | Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > | Closes: https://lore.kernel.org/oe-kbuild-all/202410291546.kvgEWJv7-lkp@xxxxxxxxx/
> >
> > Chagne from v5 to v6
> > -add comments for of_property_read_reg().
> >
> > Change from v4 to v5
> > - remove confused 0x5f00_0000 range in sample dts.
> > - reorder address at above diagram.
> >
> > Change from v3 to v4
> > - none
> >
> > Change from v2 to v3
> > - %s/cpu_untranslate_addr/parent_bus_addr/g
> > - update diagram.
> > - improve commit message.
> >
> > Change from v1 to v2
> > - update because patch1 change get untranslate address method.
> > - add using_dtbus_info in case break back compatibility for exited platform.
> > ---
> > drivers/pci/controller/dwc/pcie-designware-host.c | 55 ++++++++++++++++++++++-
> > drivers/pci/controller/dwc/pcie-designware.h | 8 ++++
> > 2 files changed, 62 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> > index 3e41865c72904..ea01b7bda0a76 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> > @@ -418,6 +418,34 @@ static void dw_pcie_host_request_msg_tlp_res(struct dw_pcie_rp *pp)
> > }
> > }
> >
> > +static int dw_pcie_get_untranslate_addr(struct dw_pcie *pci, resource_size_t pci_addr,
> > + resource_size_t *i_addr)
>
> dw_pcie_get_parent_addr()? Since this function is anyway reading the parent
> address from DT.
>
> > +{
> > + struct device *dev = pci->dev;
> > + struct device_node *np = dev->of_node;
> > + struct of_range_parser parser;
> > + struct of_range range;
> > + int ret;
> > +
> > + if (!pci->using_dtbus_info) {
> > + *i_addr = pci_addr;
> > + return 0;
> > + }
> > +
> > + ret = of_range_parser_init(&parser, np);
> > + if (ret)
> > + return ret;
> > +
> > + for_each_of_pci_range(&parser, &range) {
> > + if (pci_addr == range.bus_addr) {
> > + *i_addr = range.parent_bus_addr;
> > + break;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > int dw_pcie_host_init(struct dw_pcie_rp *pp)
> > {
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > @@ -427,6 +455,7 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> > struct resource_entry *win;
> > struct pci_host_bridge *bridge;
> > struct resource *res;
> > + int index;
> > int ret;
> >
> > raw_spin_lock_init(&pp->lock);
> > @@ -440,6 +469,20 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> > pp->cfg0_size = resource_size(res);
> > pp->cfg0_base = res->start;
> >
> > + if (pci->using_dtbus_info) {
> > + index = of_property_match_string(np, "reg-names", "config");
> > + if (index < 0)
> > + return -EINVAL;
> > + /*
> > + * Retrieve the parent bus address of PCI config space.
> > + * If the parent bus ranges in the device tree provide
> > + * the correct address conversion information, set
> > + * 'using_dtbus_info' to true, The 'cpu_addr_fixup()'
> > + * can be eliminated.
> > + */
>
> Nobody will switch to 'ranges' property if you mention it in comments. We
> usually add dev_warn_once() to print a warning for broken DT so that the users
> will try to fix it. You can use below diff (as a separate patch ofc):
>
> ```
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 6d6cbc8b5b2c..d1e5395386fe 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -844,6 +844,9 @@ void dw_pcie_iatu_detect(struct dw_pcie *pci)
> dw_pcie_cap_is(pci, IATU_UNROLL) ? "T" : "F",
> pci->num_ob_windows, pci->num_ib_windows,
> pci->region_align / SZ_1K, (pci->region_limit + 1) / SZ_1G);
> +
> + if (pci->ops && pci->ops->cpu_addr_fixup)
> + dev_warn_once(pci->dev, "Broken \"ranges\" property detected. Please fix DT!\n");
How about "Detect use old method "cpu_addr_fixup()", it should correct DT's
'ranges' and remove cpu_addr_fixup()?
> }
>
> static u32 dw_pcie_readl_dma(struct dw_pcie *pci, u32 reg)
> ```
>
> > + of_property_read_reg(np, index, &pp->cfg0_base, NULL);
>
> Can you explain what is going on here?
Because dwc use reg-name 'config' to get config space,
of_property_read_reg() will get untranslate address 'parent' bus address.
<0x8ff00000 0x80000> at example address.
cfg0_base is used to set outbound ATU.
>
> > + }
> > +
> > pp->va_cfg0_base = devm_pci_remap_cfg_resource(dev, res);
> > if (IS_ERR(pp->va_cfg0_base))
> > return PTR_ERR(pp->va_cfg0_base);
> > @@ -462,6 +505,9 @@ int dw_pcie_host_init(struct dw_pcie_rp *pp)
> > pp->io_base = pci_pio_to_address(win->res->start);
> > }
> >
> > + if (dw_pcie_get_untranslate_addr(pci, pp->io_bus_addr, &pp->io_base))
> > + return -ENODEV;
>
> Use actual return value here and below.
>
> > +
> > /* Set default bus ops */
> > bridge->ops = &dw_pcie_ops;
> > bridge->child_ops = &dw_child_pcie_ops;
> > @@ -722,6 +768,8 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
> >
> > i = 0;
> > resource_list_for_each_entry(entry, &pp->bridge->windows) {
> > + resource_size_t parent_bus_addr;
> > +
> > if (resource_type(entry->res) != IORESOURCE_MEM)
> > continue;
> >
> > @@ -730,9 +778,14 @@ static int dw_pcie_iatu_setup(struct dw_pcie_rp *pp)
> >
> > atu.index = i;
> > atu.type = PCIE_ATU_TYPE_MEM;
> > - atu.cpu_addr = entry->res->start;
> > + parent_bus_addr = entry->res->start;
> > atu.pci_addr = entry->res->start - entry->offset;
> >
> > + if (dw_pcie_get_untranslate_addr(pci, entry->res->start, &parent_bus_addr))
> > + return -EINVAL;
> > +
> > + atu.cpu_addr = parent_bus_addr;
> > +
> > /* Adjust iATU size if MSG TLP region was allocated before */
> > if (pp->msg_res && pp->msg_res->parent == entry->res)
> > atu.size = resource_size(entry->res) -
> > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > index 347ab74ac35aa..f8067393ad35a 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > @@ -463,6 +463,14 @@ struct dw_pcie {
> > struct reset_control_bulk_data core_rsts[DW_PCIE_NUM_CORE_RSTS];
> > struct gpio_desc *pe_rst;
> > bool suspended;
> > + /*
> > + * Use device tree 'ranges' property of bus node instead using
> > + * cpu_addr_fixup(). Some old platform dts 'ranges' in bus node may not
> > + * reflect real hardware's behavior. In case break these platform back
> > + * compatibility, add below flags. Set it true if dts already correct
> > + * indicate bus fabric address convert.
>
> /*
> * This flag indicates that the vendor driver uses devicetree 'ranges'
> * property to allow iATU to use the Intermediate Address (IA) for
> * outbound mapping. Using this flag also avoids the usage of
> * 'cpu_addr_fixup' callback implementation in the driver.
> */
>
> > + */
> > + bool using_dtbus_info;
>
> 'use_dt_ranges'?
It will be confused because pcie node alreadys use ranges, just parent bus
's ranges is wrong.
'use_dtbus_ranges' ?
Frank
>
> - Mani
>
> --
> மணிவண்ணன் சதாசிவம்
