Hi Dinh, Please check and apply this patch? Thanks, Nobuhiro 2024年10月4日(金) 15:16 Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>: > > From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx> > > On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be > found and the network device does not work. > > ``` > stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19) > ``` > > To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the > mdio bus. Also the PHY ID connected to this board is 4. Therefore, change > to 4. > > Fixes: 8fbc10b995a5 ("net: stmmac: check fwnode for phy device before scanning for phy") > Cc: stable@xxxxxxxxxxxxxxx # 6.3+ > Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx> > --- > arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts > index ce0d6514eeb571..e4794ccb8e413f 100644 > --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts > +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts > @@ -66,8 +66,10 @@ &gmac1 { > mdio0 { > #address-cells = <1>; > #size-cells = <0>; > - phy0: ethernet-phy@0 { > - reg = <0>; > + compatible = "snps,dwmac-mdio"; > + > + phy0: ethernet-phy@4 { > + reg = <4>; > rxd0-skew-ps = <0>; > rxd1-skew-ps = <0>; > rxd2-skew-ps = <0>; > -- > 2.45.2 > -- Nobuhiro Iwamatsu iwamatsu at {nigauri.org / debian.org / kernel.org} GPG ID: 32247FBB40AD1FA6