From: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be
found and the network device does not work.
```
stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
```
To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the
mdio bus. Also the PHY ID connected to this board is 4. Therefore, change
to 4.
Fixes: 8fbc10b995a5 ("net: stmmac: check fwnode for phy device before scanning for phy")
Cc: stable@xxxxxxxxxxxxxxx # 6.3+
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@xxxxxxxxxxx>
---
arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index ce0d6514eeb571..e4794ccb8e413f 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@ &gmac1 {
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
rxd0-skew-ps = <0>;
rxd1-skew-ps = <0>;
rxd2-skew-ps = <0>;
--
2.45.2
