> Subject: Re: [PATCH v15 2/3] i2c: aspeed: support AST2600 i2c new register
> mode driver
>
> On Mi, 2024-11-13 at 07:43 +0000, Ryan Chen wrote:
> > > Subject: Re: [PATCH v15 2/3] i2c: aspeed: support AST2600 i2c new
> > > register mode driver
> > >
> > > On Mo, 2024-10-07 at 11:52 +0800, Ryan Chen wrote:
> > > > Add i2c new register mode driver to support AST2600 i2c new
> > > > register mode. AST2600 i2c controller have legacy and new register
> > > > mode.
> > > > The
> > > > new register mode have global register support 4 base clock for
> > > > scl clock selection, and new clock divider mode. The new register
> > > > mode have separate register set to control i2c controller and
> > > > target.
> > > > This
> > > > patch is for i2c controller mode driver.
> > > >
> > > > Signed-off-by: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
> > > > ---
> > > > drivers/i2c/busses/Kconfig | 11 +
> > > > drivers/i2c/busses/Makefile | 1 +
> > > > drivers/i2c/busses/i2c-ast2600.c | 1032
> > > > ++++++++++++++++++++++++++++++
> > > > 3 files changed, 1044 insertions(+)
> > > > create mode 100644 drivers/i2c/busses/i2c-ast2600.c
> > > >
> > > [...]
> > > > diff --git a/drivers/i2c/busses/i2c-ast2600.c
> > > > b/drivers/i2c/busses/i2c-ast2600.c
> > > > new file mode 100644
> > > > index 000000000000..17ba0ee77c27
> > > > --- /dev/null
> > > > +++ b/drivers/i2c/busses/i2c-ast2600.c
> > > > @@ -0,0 +1,1032 @@
> > > [...]
> > > > +static int ast2600_i2c_probe(struct platform_device *pdev) {
> > > [...]
> > > > + i2c_bus->rst = devm_reset_control_get_shared(dev, NULL);
> > > > + if (IS_ERR(i2c_bus->rst))
> > > > + return dev_err_probe(dev, PTR_ERR(i2c_bus->rst),
> > > > "Missing reset
> > > > +ctrl\n");
> > > > +
> > > > + reset_control_deassert(i2c_bus->rst);
> > >
> > > The shared reset should be asserted again in ast2600_i2c_remove().
> > >
> > Hello,
> > It is share reset, if unbond driver and asserted the reset, it will
> > affect others driver running (which is share with the same reset.)
>
> Shared reset_control_deassert/assert are refcounted, like clk_enable/disable,
> see [1]. The reset line will only be asserted when the last driver calls
> reset_control_assert.
>
> [1] https://docs.kernel.org/driver-api/reset.html#shared-and-exclusive-resets
>
Thanks a lot, I will add in next version submit.
> regards
> Philipp
