Pulseaudio Discussion - Date Index

• Thread Index

• Using UCM with PulseAudio
  • From: broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx (Mark Brown)
• Using UCM with PulseAudio
  • From: lrg@xxxxxx (Liam Girdwood)
• Using UCM with PulseAudio
  • From: lrg@xxxxxx (Liam Girdwood)
• [PATCH 2/2] ladspa: Added a python script for testing.
  • From: ismo.puustinen@xxxxxxxxx (ismo.puustinen@xxxxxxxxx)
• [PATCH 1/2] ladspa: D-Bus interface for setting algorithm parameters on-the-fly.
  • From: ismo.puustinen@xxxxxxxxx (ismo.puustinen@xxxxxxxxx)
• Revised LADSPA D-Bus patches
  • From: ismo.puustinen@xxxxxxxxx (ismo.puustinen@xxxxxxxxx)
• status report from Deng Zhengrong Jun 15th
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH v2] bluetooth: Fix bluetooth.nrec property not updated
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• USB audio adapter
  • From: wolfgang@xxxxxxxxxxxx (Wolfgang Rohdewald)
• Using UCM with PulseAudio
  • From: broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx (Mark Brown)
• Using UCM with PulseAudio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Using UCM with PulseAudio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Reg. problem pulseaudio RTP streaming
  • From: abhishek.sharma81@xxxxxxxxx (abhishek sharma)
• Reg. problem pulseaudio as system-wide daemon
  • From: ash1412@xxxxxxxxx (Ashwani Kumar)
• [PATCH] pasuspender: Resume before exiting in case of SIGINT or fork() failure.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [PATCH] core-util: Don't accept random words in pa_parse_boolean().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] bluetooth: Fix bluetooth.nrec property not updated
  • From: frederic.danis@xxxxxxxxxxxxxxx (Frédéric Danis)
• GSOC: bluetooth latency - status report [2/?]
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• Inline Assembly in svolume_mmx.c
  • From: myles.maxfield@xxxxxxxxx (Myles C. Maxfield)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [RFC PATCH 2/4] Add use_ucm to udev detect module
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [PATCH] native: Don't save device, volume or mute of new streams.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] core-util: Make pa_make_secure_dir() act like mkdir -p
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• 3.0 release schedule
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/2] core-util: Make pa_make_secure_dir() act like mkdir -p
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] auth: Create cookie directory if it doesn't exist
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Logging startup of the first instance...
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 1/2] core-util: Make pa_make_secure_dir() act like mkdir -p
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• GSOC: bluetooth latency - status report [2/?]
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] auth: Create cookie directory if it doesn't exist
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/2] core-util: Make pa_make_secure_dir() act like mkdir -p
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Some cookie generation fixes
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Logging startup of the first instance...
  • From: dzrongg@xxxxxxxxx (rong deng)
• GSoC Status Report
  • From: stefan.saftescu@xxxxxxxxx (Ștefan Săftescu)
• pulseaudio over network
  • From: pulseaudio@xxxxxxxxxxxxx (jeroen)
• [PATCH 0/4] Use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Aarti T B)
• pulseaudio over network
  • From: h.becker@xxxxxxxxxxxxxxxx (Henning Becker)
• pulseaudio over network
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/4] Use pa_streq instead of strcmp
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio over network
  • From: pulseaudio@xxxxxxxxxxxxx (jeroen)
• 3.0 release schedule
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Logging startup of the first instance...
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Issues with pulseaudio and gdm
  • From: gnome@xxxxxxxxxx (Neil Bird)
• GSOC: bluetooth latency - status report [2/?]
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 5/5] sink, source: New functions: pa_{sink, source}_new_data_add_port().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 4/5] Assume that the ports hashmap of cards is always non-NULL.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/5] Assume that the profiles hashmap of ports is always non-NULL.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/5] card: Ensure that there's always at least one profile.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/5] sink, source: Always create a hashmap for ports.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/5] Some port and profile related refactoring.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] card: Don't crash if someone gives NULL name to pa_card_set_profile().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Fix bluetooth.nrec property not updated
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] bluetooth: Add ports to the bluetooth sink/source
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• gsoc 2012 status report about logging and testing
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] device-port: Create the profiles hashmap at initialization.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• GSOC: bluetooth latency - status report [2/?]
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH] fix the wrong parameter sequence in pax11publish
  • From: dzrongg@xxxxxxxxx (rong deng)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC PATCH 2/4] Add use_ucm to udev detect module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 0/4] Use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Aarti T B)
• [PATCH] fix the wrong parameter sequence in pax11publish
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 1/2] add log category
  • From: dzrongg@xxxxxxxxx (rong deng)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Bluetooth headset pairs but doesn't create audio device
  • From: alessandro.crismani@xxxxxxxx (Alessandro Crismani)
• [PATCH] switch-on-connect: Don't move a stream already moving
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• >Re: > [SOLVED] How to output audio through hdmi-stereo-1or other extra hdmi
  • From: xiaoli_liu_annie@xxxxxxxx (刘晓丽)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• [PATCH 2/2] cli: add commands to manipulate categories
  • From: dzrongg@xxxxxxxxx (Deng Zhengrong)
• [PATCH 1/2] add log category
  • From: dzrongg@xxxxxxxxx (Deng Zhengrong)
• [PATCH] fix the wrong parameter sequence in pax11publish
  • From: dzrongg@xxxxxxxxx (Deng Zhengrong)
• > [SOLVED] How to output audio through hdmi-stereo-1 or other extra hdmi
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• PulseAudio, Rygel, Headless server, and streaming to Onkyo TX-NR509?
  • From: michal@xxxxxxxxxx (Michał Sawicz)
• > [SOLVED] How to output audio through hdmi-stereo-1 or other extra hdmi
  • From: xiaoli_liu_annie@xxxxxxxx (刘晓丽)
• No Pulseaudio on P3 system with ICH5 Sound Card
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH 4/4] daemon: use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Arti Trivedi Bora)
• [PATCH 3/4] tests: use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Arti Trivedi Bora)
• [PATCH 2/4] pulsecore: use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Arti Trivedi Bora)
• [PATCH 1/4] modules: use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Arti Trivedi Bora)
• [PATCH 0/4] Use pa_streq instead of strcmp
  • From: tbaarti@xxxxxxxxx (Arti Trivedi Bora)
• No Pulseaudio on P3 system with ICH5 Sound Card
  • From: martin@xxxxxxxxxxxxxxxx (Martin McCormick)
• fix wrong parameter sequence
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] fix the wrong parameter sequence in pax11publish
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] bluetooth: Add ports to the bluetooth sink/source
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH] bluetooth: Add ports to the bluetooth sink/source
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• 3.0 release schedule
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• How to output audio through hdmi-stereo-1 or other extra hdmi
  • From: xiaoli_liu_annie@xxxxxxxx (刘晓丽)
• 3.0 release schedule
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Manually adding a delay to a PulseAudio sink
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] profile-switcher: Deal with new Bluetooth cards
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] profile-switcher: New module to switch card profiles based on roles
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] loopback: Fix assertion triggered if move fails
  • From: martin.xu@xxxxxxxxx (Xu, Martin)
• Clipping in Analog Mono Output
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• [RFC PATCH continued] PA2.0 UCM integration
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• master volume at zero and muted when pulseaudio starts
  • From: fajwilson@xxxxxxxxx (Frank Wilson)
• master volume at zero and muted when pulseaudio starts
  • From: fajwilson@xxxxxxxxx (Frank Wilson)
• master volume at zero and muted when pulseaudio starts
  • From: ajaygargnsit@xxxxxxxxx (Ajay Garg)
• master volume at zero and muted when pulseaudio starts
  • From: fajwilson@xxxxxxxxx (Frank Wilson)
• [PATCH] bluetooth: Add ports to the bluetooth sink/source
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH] loopback: Fix assertion triggered if move fails
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• master volume at zero and muted when pulseaudio starts
  • From: fajwilson@xxxxxxxxx (Frank Wilson)
• Using mutiple bluetooth headsets at the same time
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 2/2] pacmd: Add unloading modules by name.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] device-port: Create the profiles hashmap at initialization.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Using mutiple bluetooth headsets at the same time
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• Logging startup of the first instance...
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Analog Mono Output and Mono Input
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• Using mutiple bluetooth headsets at the same time
  • From: pa@xxxxxxxxxxxx (Jess Haas)
• [PATCH] fix the wrong parameter sequence in pax11publish
  • From: dzrongg@xxxxxxxxx (Deng Zhengrong)
• Sound Preferences (make independent from gnome-media)
  • From: jmadero.dev@xxxxxxxxx (Joel Madero)
• GSOC: bluetooth latency - status report [1/?]
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH 1/2] ladspa: D-Bus interface for setting algorithm parameters on-the-fly.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• status report of gsoc
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH/RFC 1/1] sink-input: always validate sample specs
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• [pulseuadio-discuss] [PATCH] port to gtk+-3.0
  • From: Marc-Antoine@xxxxxxxxxxxx (Marc-Antoine Perennou)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• [PATCH v2 1/2] alsa-sink: add missing header 'signal.h'
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/2] Use PA_IDXSET_FOREACH wherever applicable.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v2 2/2] alsa-source: add missing header 'signal.h'
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• [PATCH v2 1/2] alsa-sink: add missing header 'signal.h'
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• [PATCH PA1.1 1/2] alsa-sink: add missing header
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH PA1.1 1/2] alsa-sink: add missing header
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• [PATCH PA1.1 1/2] alsa-sink: add missing header
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH PA1.1 2/2] alsa-source: add missing header
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• [PATCH PA1.1 1/2] alsa-sink: add missing header
  • From: eero.nurkkala@xxxxxxxxxx (eero.nurkkala@xxxxxxxxxx)
• pulseaudio-discuss Digest, Vol 13, Issue 46
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Internal Mics and Speakers not visible in PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Internal Mics and Speakers not visible in PulseAudio
  • From: tiwai@xxxxxxx (Takashi Iwai)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [alsa-devel] Internal Mics and Speakers not visible in PulseAudio
  • From: superquad.vortex2@xxxxxxxxx (Raymond Yau)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/2] pactl: Add unloading modules by name.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Internal Mics and Speakers not visible in PulseAudio
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] pacmd: Add unloading modules by name.
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH 1/2] pactl: Add unloading modules by name.
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH v2 0/2] Module unloading by name
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• PulseAudio with mutiple users and MPD
  • From: monnier@xxxxxxxxxxxxxxxx (Stefan Monnier)
• Combined sink on system-wide setup goes silent after short inactivity and "vacuuming"
  • From: danielbuus@xxxxxxxxx (Daniel Smedegaard Buus)
• Combined sink on system-wide setup goes silent after short inactivity and "vacuuming"
  • From: danielbuus@xxxxxxxxx (Daniel Smedegaard Buus)
• [PATCH 2/2] pulsecore: Use PA_IDXSET_FOREACH wherever applicable.
  • From: harsh.bora@xxxxxxxxxx (Harsh Prateek Bora)
• [PATCH 1/2] modules: Use PA_IDXSET_FOREACH wherever applicable.
  • From: harsh.bora@xxxxxxxxxx (Harsh Prateek Bora)
• [PATCH 0/2] Use PA_IDXSET_FOREACH wherever applicable.
  • From: harsh.bora@xxxxxxxxxx (Harsh Prateek Bora)
• [PATCH] bluetooth: Fix bluetooth.nrec property not updated
  • From: frederic.danis@xxxxxxxxxxxxxxx (Frédéric Danis)
• [PATCH v3 2/2] bluetooth: module-bluetooth-policy initial commit
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/2] bluetooth: module-bluetooth-policy initial commit
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] core-util: use the generic PATH_MAX variant of pa_realpath on Mac OS X
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] core-util: use the generic PATH_MAX variant of pa_realpath on Mac OS X
  • From: ionic@xxxxxxxx (Mihai Moldovan)
• [PATCH] bluetooth: Release transport when the pa_rtpoll_run loop finishes.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] udev modules: don't use deprecated functions
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Remove usage of deprecated udev_get_*_path
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH 0/3] Unloading modules by name
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-pipe-source,sink
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• module-pipe-source,sink
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] add log category
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] use pa_streq instead of plain strcmp in daemon-conf.c
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] add set-log-target command for pacmd
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pulseaudio-discuss Digest, Vol 13, Issue 46
  • From: drew.hope+pulseaudio@xxxxxxxxx (Drew)
• [PATCH] add set-log-target command for pacmd
  • From: dzrongg@xxxxxxxxx (rong deng)
• PulseAudio with mutiple users and MPD
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• VLC + pulseaudio issues
  • From: remi@xxxxxxxxxx (Rémi Denis-Courmont)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [PATCH] Remove usage of deprecated udev_get_*_path
  • From: jan.steffens@xxxxxxxxx (Jan Alexander Steffens (heftig))
• [PATCH] add set-log-target command for pacmd
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] add set-log-target command for pacmd
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] add set-log-target command for pacmd
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] use pa_streq instead of plain strcmp in daemon-conf.c
  • From: dzrongg@xxxxxxxxx (rong deng)
• VLC + pulseaudio issues
  • From: drew.hope+pulseaudio@xxxxxxxxx (Drew)
• User volume vs. Application volume
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• [PATCH 2/2] module-pipe: check return value of mkfifo()
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH 1/2] module-pipe: whitespace and log output cleanup
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• module-pipe-source,sink
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• User volume vs. Application volume
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• User volume vs. Application volume
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• [PATCH] add log category
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH] add log category
  • From: dzrongg@xxxxxxxxx (Deng Zhengrong)
• About My Blog Space
  • From: dzrongg@xxxxxxxxx (rong deng)
• [PATCH 2/2] core: Add debug prints for state changes in sinks and sink-inputs.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] modules, pulse, core: React to failing pa_memblockq_push calls.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/2] core: Add debug prints for state changes in sinks and sink-inputs.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH 1/2] core: Add functions that return the logical name of the state of sinks and sink inputs.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH 0/2] core: Add debug prints for state changes in sinks and sink-inputs.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH 0/3] Unloading modules by name
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/2] modules, pulse, core: React to failing pa_memblockq_push calls.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH 0/2] modules, pulse, core: React to failing pa_memblockq_push calls.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/2] modules, pulse, core: React to failing pa_memblockq_push calls.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH 1/2] core: Assert on memchunk divisibility by sample spec in pa_memblockq_push().
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH 0/2] modules, pulse, core: React to failing pa_memblockq_push calls.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• PulseAudio, Rygel, Headless server, and streaming to Onkyo TX-NR509?
  • From: john@xxxxxxxxxx (John Clemens)
• PulseAudio with mutiple users and MPD
  • From: monnier@xxxxxxxxxxxxxxxx (Stefan Monnier)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [RFC v0 0/5] Multiple Bluetooth SCO connections
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] bluetooth: Let PulseAudio always handle the transition to SINK_STATE_PLAYING.
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] Add profile argument to module-bluetooth-discover
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] bluetooth: Release transport when the pa_rtpoll_run loop finishes.
  • From: luiz.dentz@xxxxxxxxx (Luiz Augusto von Dentz)
• [PATCH] udev modules: don't use deprecated functions
  • From: Marc-Antoine@xxxxxxxxxxxx (Marc-Antoine Perennou)
• [PATCH] protocol-native: Use foreach to iterate trough modules.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Patches for Solaris
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• Patches for Solaris
  • From: brian.cameron@xxxxxxxxxx (Brian Cameron)
• [PATCH] protocol-native: Use foreach to iterate trough modules.
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH 3/3] pactl: Add unloading modules by name
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH 2/3] introspect: Add unloading modules by name
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH 1/3] module: Add support for unloading by name.
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH 0/3] Unloading modules by name
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH] bluetooth: Release transport when the pa_rtpoll_run loop finishes.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH] protocol-native: Use foreach to iterate trough modules.
  • From: poljarinho@xxxxxxxxx (poljar)
• About My Blog Space
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Failed to load module "module-bluetooth-device"
  • From: jh@xxxxxxxxxx (Juha Heinanen)
• [PATCH] pactl: Added unloading modules by name
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• My attempt to reduce latency with pacat and tvtime
  • From: selliott4@xxxxxxxxxxxxx (Steven Elliott)
• My attempt to reduce latency with pacat and tvtime
  • From: selliott4@xxxxxxxxxxxxx (Steven Elliott)
• My attempt to reduce latency with pacat and tvtime
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] protocol-native: Use foreach to iterate trough modules.
  • From: poljarinho@xxxxxxxxx (poljar)
• About My Blog Space
  • From: dzrongg@xxxxxxxxx (rong deng)
• My attempt to reduce latency with pacat and tvtime
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• My attempt to reduce latency with pacat and tvtime
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• My attempt to reduce latency with pacat and tvtime
  • From: selliott4@xxxxxxxxxxxxx (Steven Elliott)
• [PATCH] Add support of callbacks for operation cancelation
  • From: favonia@xxxxxxxxx (Favonia)
• [PATCH] Add support of callbacks for operation cancelation
  • From: favonia@xxxxxxxxx (Favonia)
• [PATCH] Fix spelling of separated: s, sepera, separa, g
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH] PulseAudio 2.0 to latest systemd/udev git
  • From: kelly@xxxxxxxxxxxxxxxxxxxx (Kelly Anderson)
• [PATCH] pactl: Added unloading modules by name
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] once: Fix race causing pa_once to sometimes run twice
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [RFC PATCH 4/4] Add UCM jack detection into alsa card module
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• [RFC PATCH 3/4] Add UCM modifier functions into alsa card module
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• [RFC PATCH 2/4] Add use_ucm to udev detect module
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• [RFC PATCH 1/4] Integrate UCM basic functions into alsa card module
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• [RFC PATCH 0/4] PA2.0 UCM integration
  • From: feng.wei@xxxxxxxxxx (feng.wei@xxxxxxxxxx)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• Streaming between two WinXP machines
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Streaming between two WinXP machines
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [PATCH] udev modules: don't use deprecated functions
  • From: Marc-Antoine@xxxxxxxxxxxx (Marc-Antoine Perennou)
• [alsa-devel] Adjust volume may cause audio playback corruption
  • From: clemens@xxxxxxxxxx (Clemens Ladisch)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [PATCH] pacmd: Added unloading modules by name.
  • From: poljarinho@xxxxxxxxx (poljar)
• [alsa-devel] Adjust volume may cause audio playback corruption
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [alsa-devel] Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [PATCH] pactl: Added unloading modules by name
  • From: poljarinho@xxxxxxxxx (poljar)
• about log level configuration
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• about log level configuration
  • From: dzrongg@xxxxxxxxx (rong deng)
• Streaming between two WinXP machines
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluetooth: Fix crash on disconnection
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] bluetooth: Fix crash on disconnection
  • From: frederic.danis@xxxxxxxxxxxxxxx (Frédéric Danis)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH] bluetooth: Fix crash on disconnection
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [alsa-devel] Adjust volume may cause audio playback corruption
  • From: tiwai@xxxxxxx (Takashi Iwai)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• Pulseaudio on pandaboard problem re-visited..
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• Streaming between two WinXP machines
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• [PATCH] bluetooth: Fix crash on disconnection
  • From: frederic.danis@xxxxxxxxxxxxxxx (Frédéric Danis)
• Streaming between two WinXP machines
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] pacmd: Added --help and --version descriptions to the man page.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Streaming between two WinXP machines
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• Streaming between two WinXP machines
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Netiquette (was: Streaming between two WinXP machines)
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Port icons, +11 dB, ABI stability
  • From: patrakov@xxxxxxxxx (Alexander E. Patrakov)
• Delays and strange transfer rate on network playback
  • From: viraptor@xxxxxxxxx (Stanisław Pitucha)
• Clean-up callbacks for pa_operation's
  • From: favonia@xxxxxxxxx (Favonia)
• Adjust volume may cause audio playback corruption
  • From: fykcee1@xxxxxxxxx (cee1)
• [ANNOUNCE] PulseAudio 2.0
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Streaming between two WinXP machines
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [ANNOUNCE] PulseAudio 2.0
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [ANNOUNCE] PulseAudio 2.0
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v3 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v3 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH] pacat: paplay stream format extention
  • From: xingchao.wang@xxxxxxxxx (Wang Xingchao)
• [PATCH] sink-input: Relax initial volume setting restrictions
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v3 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 2/3] resampler: Use more descriptive buffer names.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 1/3] resampler: Use pa_xnew0() to avoid manual zeroing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v3 0/3] Libsamplerate resampler crash fix
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Windows installation help
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Windows installation help
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• ALC883 no sound from lfe after playback stopped and started
  • From: piotrek_sz@xxxxx (Piotr Szymaniak)
• Windows installation help
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Port icons, +11 dB, ABI stability
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] sink-input: Relax initial volume setting restrictions
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Port icons, +11 dB, ABI stability
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• ALC883 no sound from lfe after playback stopped and started
  • From: piotrek_sz@xxxxx (Piotr Szymaniak)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• Is it OK for PulseAudio to crash when BlueZ is buggy?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/2] sink-input: check return error value
  • From: xingchao.wang@xxxxxxxxx (Wang Xingchao)
• [PATCH 1/2] sink-input: change return type
  • From: xingchao.wang@xxxxxxxxx (Wang Xingchao)
• Port icons, +11 dB, ABI stability
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] modargs: Don't fail needlessly in pa_modargs_get_sample_spec_and_channel_map().
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Port icons, +11 dB, ABI stability
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] sink_input: check return value
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• How to debug intermittent audio skips?
  • From: accounts@xxxxxxxxxxxxx (Charles Lindsay)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Windows installation help
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] sndfile-util: reduce useless loop
  • From: xingchao.wang@xxxxxxxxx (Wang Xingchao)
• Android and latency questions
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] pacmd: Added --help and --version descriptions to the man page.
  • From: poljarinho@xxxxxxxxx (poljar)
• Android and latency questions
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Added --help and --version options for pacmd
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH] Added --help and --version options for pacmd
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• How to debug intermittent audio skips?
  • From: accounts@xxxxxxxxxxxxx (Charles Lindsay)
• Android and latency questions
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• Android and latency questions
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Android and latency questions
  • From: dave@xxxxxxxxxxxxx (Dave Horoschak)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH 0/3] Suspending loopback
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Suspending loopback
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• M-Audio Delta 44: simultaneous input and output
  • From: gkodadek@xxxxxxxxx (Gene Kodadek)
• [PATCH 0/3] Suspending loopback
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Suspending loopback
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Pulseaudio on pandaboard problem re-visited..
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• How to debug intermittent audio skips?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• How to debug intermittent audio skips?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Pulseaudio on pandaboard problem re-visited..
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• How to debug intermittent audio skips?
  • From: accounts@xxxxxxxxxxxxx (Charles Lindsay)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH 0/3] Suspending loopback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Suspending loopback
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/3] bluetooth: suspend source when stream stops
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH 2/3] loopback: Cork source-output if sink is suspended
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH 1/3] loopback: Cork sink-input if source is suspended
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH 0/3] Suspending loopback
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• My Blog URL for GSoC 2012
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] loopback: limit rate of a debug trace
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio on pandaboard problem re-visited..
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• multiple fallbacks
  • From: ribamar.santarosa@xxxxxxxxxxxxx (Ribamar Santarosa)
• multiple fallbacks
  • From: ribamar.santarosa@xxxxxxxxxxxxx (Ribamar Santarosa)
• [PATCH] loopback: limit rate of a debug trace
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] loopback: limit rate of a debug trace
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: wangxingchao2011@xxxxxxxxx (Wang Xingchao)
• Pulseaudio on pandaboard problem re-visited..
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH] Added --help and --version options for pacmd
  • From: poljarinho@xxxxxxxxx (poljar)
• [PATCH v2] alsa: Add support for sound cards with 4-channel input.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 3/3] memblockq: Add history for debugging purposes.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• My Blog URL for GSoC 2012
  • From: dzrongg@xxxxxxxxx (rong deng)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• PA works on Firefox/flash, doesn't work on mplayer/vlc
  • From: spideybr@xxxxxxxxx (Claudio Roberto França Pereira)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• PA works on Firefox/flash, doesn't work on mplayer/vlc
  • From: spideybr@xxxxxxxxx (Claudio Roberto França Pereira)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• Pulseaudio on pandaboard problem re-visited..
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Pulseaudio on pandaboard problem re-visited..
  • From: shawn.ferris@xxxxxxxxx (Shawn Ferris)
• [PATCH 3/3] memblockq: Add history for debugging purposes.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] memblockq: Fix the order of setting minreq and prebuf.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] memblockq: Use pa_xnew0() to avoid manual zeroing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] memblockq: Add history for debugging purposes.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio seems to resample without need
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio seems to resample without need
  • From: moebius1@xxxxxxx (moebius)
• pulseaudio seems to resample without need
  • From: moebius1@xxxxxxx (moebius)
• pulseaudio seems to resample without need
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Temporary directory created by root although not in system wide mode
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Temporary directory created by root although not in system wide mode
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• `make_random_dir()` instead of `mkstemp()`
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Welcome to our GSoC students!
  • From: stefan.saftescu@xxxxxxxxx (Ștefan Săftescu)
• RFC: Configuration system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• RFC: Configuration system
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Clean up of /tmp/
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] README: Add entry for correct spelling
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] echo-cancel: Drop the correct amount of samples when skipping.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] echo-cancel: Drop the correct amount of samples when skipping.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH v2 0/3] Libsamplerate resampler crash fix
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• RFC: Configuration system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pulseaudio seems to resample without need
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio seems to resample without need
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pulseaudio seems to resample without need
  • From: moebius1@xxxxxxx (moebius)
• RFC: Configuration system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• pa_once can run twice?
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• RFC: Configuration system
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• RFC: Configuration system
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200) [SOLVED]
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• [PATCH v2 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 2/3] resampler: Use more descriptive buffer names.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 1/3] resampler: Use pa_xnew0() to avoid manual zeroing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v2 0/3] Libsamplerate resampler crash fix
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• pa_once can run twice?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Welcome to our GSoC students!
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• pa_once can run twice?
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• pa_once can run twice?
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Clean up of /tmp/
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• [PATCH] echo-cancel: Drop the correct amount of samples when skipping.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] echo-cancel: Drop the correct amount of samples when skipping.
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] echo-cancel: Clarify function call contexts.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] echo-cancel: Fix memblockq length check.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: thomas.martitz@xxxxxxxxxxxxxxxxxxxxx (Thomas Martitz)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH] echo-cancel: Drop the correct amount of samples when skipping.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• pulseaudio seems to resample without need
  • From: moebius1@xxxxxxx (moebius)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Clean up of /tmp/
  • From: david.hagood@xxxxxxxxx (david.hagood@xxxxxxxxx)
• [PATCH] README: Add entry for correct spelling
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• [PATCH] Correct spelling of Pulse*A*udio
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Clean up of /tmp/
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• Welcome to our GSoC students!
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• thank you letter
  • From: dzrongg@xxxxxxxxx (rong deng)
• pa_once can run twice?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] once: Fix race in implementation
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 2/3] resampler: Rename buf3 and buf4 to buf4 and buf5.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• pa_once can run twice?
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH 2/3] resampler: Rename buf3 and buf4 to buf4 and buf5.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 3/3] resampler: Add support for resamplers that consume less data than asked.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 2/3] resampler: Rename buf3 and buf4 to buf4 and buf5.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 1/3] resampler: Use pa_xnew0() to avoid manual zeroing.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/3] Libsamplerate resampler crash fix
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] alsa: Add support for 4-channel mic arrays.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• "hello, world" volume control
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• "hello, world" volume control
  • From: diogofsr@xxxxxxxxx (Diogo F. S. Ramos)
• "hello, world" volume control
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] Add profile argument to module-bluetooth-discover
  • From: pa@xxxxxxxxxxxx (Jess Haas)
• "hello, world" volume control
  • From: diogofsr@xxxxxxxxx (Diogo F. S. Ramos)
• Multiple RTP Receivers not in sync
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• pa_once can run twice?
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] flist: Increase default list size to 256
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Multiple RTP Receivers not in sync
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• "hello, world" volume control
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• Conception of PulseAudio in public through Debian
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• "hello, world" volume control
  • From: diogofsr@xxxxxxxxx (Diogo F. S. Ramos)
• [PATCH] bluetooth: Let PulseAudio always handle the transition to SINK_STATE_PLAYING.
  • From: jarkko.suontausta@xxxxxxxxx (Jarkko Suontausta)
• [PATCH] flist: Increase default list size to 256
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• No subject
  • From: bogus@xxxxxxxxxxxxxxxxxx ()
• [PATCH] flist: Increase default list size to 256
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Conception of PulseAudio in public through Debian
  • From: ngoonee.talk@xxxxxxxxx (Oon-Ee Ng)
• Emptying a record stream's buffer
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• Missing channels on usb audio device
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• Conception of PulseAudio in public through Debian
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• no audio after suspend and resume
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Sound Card Not Seen By PulseAudio (Intel HDAC C200)
  • From: awilliam@xxxxxxxxxxxxx (Adam Tauno Williams)
• Emptying a record stream's buffer
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Emptying a record stream's buffer
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• Emptying a record stream's buffer
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Emptying a record stream's buffer
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• [PATCH 0/5] No more dual-direction ports.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Emptying a record stream's buffer
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Emptying a record stream's buffer
  • From: aeikum@xxxxxxxxxxxxxxx (Andrew Eikum)
• [PATCH 0/5] No more dual-direction ports.
  • From: broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx (Mark Brown)
• [PATCH 0/5] No more dual-direction ports.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 4/5] alsa-mixer: Remove the name option in the General section from path configuration files.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] dbus: fix dbus argument type in iface-stream.c handle_move() (fwd)
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH 0/5] No more dual-direction ports.
  • From: broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx (Mark Brown)
• [PATCH 4/5] alsa-mixer: Remove the name option in the General section from path configuration files.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/5] No more dual-direction ports.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• [RFC 0/3] Automatically enable loopback on sources
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] dbus: fix dbus argument type in iface-stream.c handle_move() (fwd)
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] dbus: fix dbus argument type in iface-stream.c handle_move() (fwd)
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH 5/5] device-port: Make it impossible to have a dual-direction port.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] alsa-mixer: Remove the name option in the General section from path configuration files.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/5] switch-on-port-available: Prepare for port->is_{out, in}put going away.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/5] device-port: Initialize profiles in pa_device_port_new().
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/5] card: Store a pa_card pointer in pa_card_profile.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/5] No more dual-direction ports.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Conception of PulseAudio in public through Debian
  • From: ngoonee.talk@xxxxxxxxx (Oon-Ee Ng)
• Missing channels on usb audio device
  • From: linux@xxxxxxxx (Robert M. Albrecht)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• Conception of PulseAudio in public through Debian
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Detecting low buffer level of a sink output
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Conception of PulseAudio in public through Debian
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• Conception of PulseAudio in public through Debian
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• [SOLVED] usb sound card: PCM has 8 channels, thats too much & cannot submit datapipe for urb 0
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• Conception of PulseAudio in public through Debian
  • From: Martin@xxxxxxxxxxxx (Martin Steigerwald)
• Multiple RTP Receivers not in sync
  • From: sebastian.stuecker@xxxxxxxxxxxxxx (Sebastian Stuecker)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• Conception of PulseAudio in public through Debian
  • From: smcnam@xxxxxxxxx (Sean McNamara)
• pulseaudio - not audio from iceweasel after suspend
  • From: smcnam@xxxxxxxxx (Sean McNamara)
• Conception of PulseAudio in public through Debian
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• pulseaudio - not audio from iceweasel after suspend
  • From: paulepanter@xxxxxxxxxxxxxxxxxxxxx (Paul Menzel)
• Detecting low buffer level of a sink output
  • From: mm0pointer@xxxxxxxx (Marcel Müller)
• pulseaudio - not audio from iceweasel after suspend
  • From: mira.mikes@xxxxxxxxx (Jaromír Mikeš)
• [PATCH v5 6/6] pactl: Print card port properties with the "list" command.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 5/6] native: Send the actual port proplists with card info.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 4/6] alsa-mixer: Add support for defining port property lists in the path configuration files.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 3/6] conf-parser: Add support for parsing property lists.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 2/6] conf-parser: Pass parser state in a struct also for parse callbacks.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 1/6] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v5 0/6] Configurable port properties
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/2] tagstruct: Allow NULL proplist with pa_tagstruct_get_proplist().
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/2] proplist: Change proplist_name_valid() to be public function pa_proplist_key_valid().
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/2] Optimize pa_tagstruct_get_proplist() for module-tunnel.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] pulse: Use more intuitive indexing with port infos in introspect.c.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Fix a copy-paste error in PROTOCOL.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 0/9] Configurable port properties
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4 8/9] native: Add a proplist to the sink and source info.
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH v4 0/9] Configurable port properties
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v4 8/9] native: Add a proplist to the sink and source info.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v4 9/9] pactl: Print port properties with the "list" command.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 8/9] native: Add a proplist to the sink and source info.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 7/9] tagstruct: Allow NULL proplist with pa_tagstruct_get_proplist().
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 6/9] proplist: Change proplist_name_valid() to be public function pa_proplist_key_valid().
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 5/9] native: Send the actual port proplists with card info.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 4/9] alsa-mixer: Add support for defining port property lists in the path configuration files.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 3/9] conf-parser: Add support for parsing property lists.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 2/9] conf-parser: Pass parser state in a struct also for parse callbacks.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 1/9] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH v4 0/9] Configurable port properties
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] generate api for ext-device-manager and ext-device-restore
  • From: christoph.gysin@xxxxxxxxx (Christoph Gysin)
• How can I get my mic working?
  • From: pulse@xxxxxxxxxxxxxx (Joseph Shraibman)
• [PATCH 0/4] Third try at making port properties configurable
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/4] Third try at making port properties configurable
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH 0/4] Third try at making port properties configurable
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] alsa-sink/source: Really set volumes on port change
  • From: oku@xxxxxx (Jyri Sarha)
• [RFC v0 5/5] bluetooth: Dynamically change outgoing MTU
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• [RFC v0 4/5] bluetooth: Consider different input and output MTU
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• [RFC v0 3/5] bluetooth: Removed library for IPC to BlueZ
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• [RFC v0 2/5] bluetooth: Avoid using IPC mechanism to BlueZ
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• [RFC v0 1/5] bluetooth: Check errors in init_bt
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• [RFC v0 0/5] Multiple Bluetooth SCO connections
  • From: mikel.astiz.oss@xxxxxxxxx (Mikel Astiz)
• Questions about setting volume over "base volume"
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Questions about setting volume over "base volume"
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Pulseaudio with VT1708S soundcard - Splitting between output Archlinux
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Pulseaudio with VT1708S soundcard - Splitting between output Archlinux
  • From: sweetthdevil@xxxxxxxxx (Sw@g)
• [PATCH 4/4] alsa-mixer: Add support for defining port property lists in the path configuration files.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/4] conf-parser: Add support for parsing property lists.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/4] conf-parser: Pass parser state in a struct also for parse callbacks.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/4] conf-parser: Pass parser state in a struct instead of function parameters.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/4] Third try at making port properties configurable
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] device-restore: Fix empty argument list declaration.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Questions about setting volume over "base volume"
  • From: fykcee1@xxxxxxxxx (cee1)
• Questions about setting volume over "base volume"
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Pulseaudio with VT1708S soundcard - Splitting between output Archlinux
  • From: rabeslik@xxxxxxxxx (Roman Beslik)
• Questions about setting volume over "base volume"
  • From: fykcee1@xxxxxxxxx (fykcee1@xxxxxxxxx)
• Pulseaudio with VT1708S soundcard - Splitting between output Archlinux
  • From: sweetthdevil@xxxxxxxxx (Sw@g)
• Google summer of code Project idea resubmission
  • From: ganesan1063@xxxxxxxxx (ganesan raja)
• Google summer of code Project idea resubmission
  • From: ganesan1063@xxxxxxxxx (ganesan raja)
• [pulseaudio-discuss] [RFC 0/3] Automatically enable loopback on sources
  • From: yodor1@xxxxxxxxx (Todor Gyumyushev)
• [PATCH] Removed the option to specify sample format. (bug 46529)
  • From: stefan.saftescu@xxxxxxxxx (Ștefan Săftescu)
• [PATCH] doxygen: fix warning in introspect.h; minor rewording and punctuation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] clarify proplist doxygen documentation
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] core: fix comments
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] modules: upper/lowercase in comment
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] build: fix spelling in src/Makefile.am
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] dbus: fix dbus argument type in iface-stream.c handle_move()
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] native: Don't save device, volume or mute of new streams.
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] native: Don't save device, volume or mute of new streams.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] daemon: Don't rely on prctl(PR_SET_KEEPCAPS, 0) for dropping caps.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Fix unused buffer size to avoid xrun
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• [PATCH] Fix unused buffer size to avoid xrun
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Fix unused buffer size to avoid xrun
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• reproducing PA performance results
  • From: pmeerw@xxxxxxxxxx (Peter Meerwald)
• [PATCH] Fix unused buffer size to avoid xrun
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Fix unused buffer size to avoid xrun
  • From: feng.wei@xxxxxxxxxx (Feng Wei)
• Crackling sound with module-loopback
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH v2] alsa-sink: Make sure volumes are synchronised after fast user switching
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] alsa-sink: Make sure volumes are synchronised after fast user switching
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• GSoC Proposal: Configurable latency for Bluetooth devices
  • From: poljarinho@xxxxxxxxx (poljarinho@xxxxxxxxx)
• [PATCH] alsa-sink/source: Really set volumes on port change
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v3 2/2] bluetooth: module-bluetooth-policy initial commit
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] module-loopback: Reset callbacks in teardown
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-loopback: Reset callbacks in teardown
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] module-loopback: Reset callbacks in teardown
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] module-loopback: Reset callbacks in teardown
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Pulseaudio over WLAN stuttering
  • From: kugel@xxxxxxxxxxx (Thomas Martitz)
• [PATCH] alsa-sink/source: Really set volumes on port change
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] module-loopback: Reset callbacks in teardown
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v3 2/2] bluetooth: module-bluetooth-policy initial commit
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH v3 2/2] bluetooth: module-bluetooth-policy initial commit
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v3 1/2] loopback: Enable routing on loopback streams
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH v3 0/2] Automatically enable loopback
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• Making locking nicer for NFS
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• Making locking nicer for NFS
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Making locking nicer for NFS
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Making locking nicer for NFS
  • From: gmane@xxxxxxxxxxxxxx (Colin Guthrie)
• [PATCH] cpulimit: Explicitly ignore pa_read() return value.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Question about streams...
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• Making locking nicer for NFS
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Question about streams...
  • From: jyavenard@xxxxxxxxx (Jean-Yves Avenard)
• Making locking nicer for NFS
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• no output from pulseaudio on embedded arm platform
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• pulseaudio-1.99.1 release problem
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Making locking nicer for NFS
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• Question about streams...
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Fwd: [PATCH] proof of concept: use pactl log to get the buffer log
  • From: dzrongg@xxxxxxxxx (rong deng)
• Question about streams...
  • From: jyavenard@xxxxxxxxx (Jean-Yves Avenard)
• Crackling sound with module-loopback
  • From: david@xxxxxx (Davíð Steinn Geirsson)
• [PATCH] proof of concept: use pactl log to get the buffer log
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] loopback: Fix crash on error during init
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• [PATCH] oss: Check pa_read() return value.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 5/5] mainloop: Check pa_write() return value.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 4/5] mainloop: Write to the wakeup pipe unconditionally when waking up the mainloop.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 3/5] mainloop: Remove redundant wakeup_pipe validity checks.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 2/5] mainloop: Remove useless pa_mainloop_wakeup() calls.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 1/5] mainloop: Change wakeup_requested type from pa_bool_t to pa_atomic_t.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH 0/5] A bunch of pa_mainloop_wakeup() related fixes
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• pa_mainloop_wakeup() broken and useless?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] loopback: Fix crash on error during init
  • From: frederic.dalleau@xxxxxxxxx (Dalleau, Frederic)
• [PATCH] loopback: Fix crash on error during init
  • From: frederic.dalleau@xxxxxxxxxxxxxxx (Frédéric Dalleau)
• [PATCH] proof of concept: use pactl log to get the buffer log
  • From: dzrongg@xxxxxxxxx (Deng Zhenrong)
• [PATCH] use CLOCK_MONOTONIC_COARSE to reduce the system call
  • From: dzrongg@xxxxxxxxx (rong deng)
• Unsynchronised ALSA and PA volumes with fast user switching
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• Unsynchronised ALSA and PA volumes with fast user switching
  • From: tanuk@xxxxxx (Tanu Kaskinen)
• Bluetooth headset not appearing in pavucontrol
  • From: delentef@xxxxxxxxx (Fabrice DELENTE)
• Unsynchronised ALSA and PA volumes with fast user switching
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] Hack
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• pulseaudio-1.99.1 release problem
  • From: ash1412@xxxxxxxxx (Ashwani Kumar)
• pulseaudio-1.99.1 release problem
  • From: ash1412@xxxxxxxxx (Ashwani Kumar)
• pa_mainloop_wakeup() broken and useless?
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] mainloop-signal: Explicitly ignore pa_write() return value.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] smoother-test: Fix array overflow.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• [PATCH] Fix pa_parse_boolean() return value checking.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] rtp: Get rid of an "unitialized value" warning from Coverity.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] rtsp-client: Fix rtp_port reading.
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] rtsp-client: Fix rtp_port reading.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• [PATCH] pasuspender: Check pa_context_connect() return value.
  • From: tanu.kaskinen@xxxxxxxxx (Tanu Kaskinen)
• more thoughts about my GSoC plan
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] use CLOCK_MONOTONIC_COARSE to reduce the system call
  • From: arun.raghavan@xxxxxxxxxxxxxxx (Arun Raghavan)
• [PATCH] use CLOCK_MONOTONIC_COARSE to reduce the system call
  • From: pierre-louis.bossart@xxxxxxxxxxxxxxx (Pierre-Louis Bossart)
• [PATCH] pasuspender: Check pa_context_connect() return value.
  • From: david.henningsson@xxxxxxxxxxxxx (David Henningsson)
• NVidia HDMI output
  • From: belegdol@xxxxxxxxx (Julian Sikorski)