Linux for MIPS

• Thread Index

• Re: [PATCH 3/3] MIPS: DMA: Add plat_extra_sync_for_cpu()
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mips: fix start of free memory when using initrd
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: DMA: Add plat_extra_sync_for_cpu()
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] MIPS: Move FIXADDR_TOP into spaces.h
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: DMA: Add plat_extra_sync_for_cpu()
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 2/3] MIPS: Allow UserLocal on MIPS_R1 processors
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] MIPS: DMA: Add plat_extra_sync_for_cpu()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 3/3] MIPS: DMA: Add plat_extra_sync_for_cpu()
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 2/3] MIPS: Allow UserLocal on MIPS_R1 processors
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH v2 1/3] MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Bernhard Walle <walle@xxxxxxxxxxxxx>
• [PATCH] mips: fix start of free memory when using initrd
  • From: Greg Ungerer <gerg@xxxxxxxxxxxx>
• [PATCH v2 5/5] MIPS: Move FIXADDR_TOP into spaces.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 5/5] MIPS: Move FIXADDR_TOP into spaces.h
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• Re: Memory regression test tool on MIPS needed
  • From: "Brian FOSTER" <brian.foster@xxxxxxxxxxxxxxx>
• Memory regression test tool on MIPS needed
  • From: naren.mehra@xxxxxxxxx
• Re: [PATCH 1/5] MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 5/5] MIPS: Move FIXADDR_TOP into spaces.h
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 4/5] MIPS: Honor L2 bypass bit
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH RESEND 3/5] MIPS: pfn_valid() is broken on low memory HIGHMEM systems
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 2/5] MIPS: sync after cacheflush
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 1/5] MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 0/5] MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Bernhard Walle <walle@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Bernhard Walle <walle@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Arnaud Patard <apatard@xxxxxxxxxxxx>
• Re: [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH] MIPS: N32: Fix getdents64 syscall for n32
  • From: Bernhard Walle <walle@xxxxxxxxxxxxx>
• [PATCH -mm 4/8] mips: enable ARCH_DMA_ADDR_T_64BIT with (HIGHMEM && 64BIT_PHYS_ADDR) || 64BIT
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] MIPS: Fix vmlinuz to flush the caches after kernel decompression
  • From: Shmulik Ladkani <shmulik.ladkani@xxxxxxxxx>
• Network Inst
  • From: chris@xxxxxxxxxx
• Re: Ftrace for MIPS may hang on SMP system
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: some question about wmb in mips
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: some question about wmb in mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the length of vmlinux.bin
  • From: Shmulik Ladkani <shmulik.ladkani@xxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• Re: some question about wmb in mips
  • From: loody <miloody@xxxxxxxxx>
• broken eglibc
  • From: Andreas Bießmann <andreas.devel@xxxxxxxxxxxxxx>
• [PATCH 2/2] AR7: add support for Titan (TNETV10xx) SoC variant
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 1/2] AR7: initialize GPIO earlier
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 0/2] AR7: add support for Titan TNETV10xx SoC
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: How is interrupt handling on MIPS SMP?
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: How is interrupt handling on MIPS SMP?
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• How is interrupt handling on MIPS SMP?
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: Does Linux Mips support compressed Kernel?
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: Does Linux Mips support compressed Kernel?
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: Does Linux Mips support compressed Kernel?
  • From: "Ardelean, Andrei" <Andrei.Ardelean@xxxxxxx>
• Re: Does Linux Mips support compressed Kernel?
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] tracing/ftrace: Fix the potential hang on MIPS SMP
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH 2/2] MIPS: Alchemy: DB1300 support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Alchemy: Au1300 SoC support
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 0/2] MIPS: Au1300/DB1300 support.
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH V2] mips: irq: add stackoverflow detection
  • From: jiang.adam@xxxxxxxxx
• [[PATCH V2]] mips: irq: add stackoverflow detection
  • From: jiang.adam@xxxxxxxxx
• Re: [PATCH] mips: irq: add statckoverflow detection
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: [PATCH] mips: irq: add stackoverflow detection
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Does Linux Mips support compressed Kernel?
  • From: "Ardelean, Andrei" <Andrei.Ardelean@xxxxxxx>
• Re: [PATCH] mips: irq: add statckoverflow detection
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Alchemy: update inlinable GPIO API
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] mips: irq: add stackoverflow detection
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: [PATCH 3/3] mips: irq: add stackoverflow detection
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: [PATCH 3/3] mips: irq: add stackoverflow detection
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 3/3] mips: irq: add stackoverflow detection
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: [PATCH] mips: irq: add statckoverflow detection
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] tracing/ftrace: Fix the potential hang on MIPS SMP
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] MIPS: Hookup fanotify_init, fanotify_mark, and prlimit64 syscalls.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: MIPS: Get rid of branches to .subsections.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: MIPS: Get rid of branches to .subsections.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS: Get rid of branches to .subsections.
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Ftrace for MIPS may hang on SMP system
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] mips: irq: add statckoverflow detection
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] mips: irq: add statckoverflow detection
  • From: jiang.adam@xxxxxxxxx
• [PATCH][MIPS] PowerTV: Cleanup code to handle early bootmem allocations
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Some questions about exceptions?
  • From: loody <miloody@xxxxxxxxx>
• Re: sparsemem support on MIPS
  • From: Michael Sundius <msundius@xxxxxxxxx>
• Re: sparsemem support on MIPS
  • From: "Jon Fraser" <jfraser@xxxxxxxxxxxx>
• Re: sparsemem support on MIPS
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH 1/2][USB] USB/PowerTV: Add support for PowerTV USB interface
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH 1/2][USB] USB/PowerTV: Add support for PowerTV USB interface
  • From: Greg KH <greg@xxxxxxxxx>
• sparsemem support on MIPS
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• Re: [Help] R3000 CPU porting, Oops while run app
  • From: arrow zhang <arrow.ebd@xxxxxxxxx>
• Re: [PATCH] MIPS: TX49xx: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  • From: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
• [PATCH] MIPS: Alchemy: resolve prom section mismatches
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• RE: Does Mips Linux rely on Yamon h/w initialization (other than DDR memory which is strictly necessary)?
  • From: "Ardelean, Andrei" <Andrei.Ardelean@xxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• Re: Does Mips Linux rely on Yamon h/w initialization (other than DDR memory which is strictly necessary)?
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• MIPS: Get rid of branches to .subsections.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS: Get rid of branches to .subsections.
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• Does Mips Linux rely on Yamon h/w initialization (other than DDR memory which is strictly necessary)?
  • From: "Ardelean, Andrei" <Andrei.Ardelean@xxxxxxx>
• Re: MIPS: Get rid of branches to .subsections.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• MIPS: Get rid of branches to .subsections.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: kmalloc issue on MIPS target
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• kmalloc issue on MIPS target
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• Re: [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] cavium-octeon: determine if helper should build
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [Help] R3000 CPU porting, Oops while run app
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [Help] R3000 CPU porting, Oops while run app
  • From: arrow zhang <arrow.ebd@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• [Help] R3000 CPU porting, Oops while run app
  • From: arrow zhang <arrow.ebd@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• [Help] R3000 CPU porting, Oops while run app
  • From: arrow zhang <arrow.ebd@xxxxxxxxx>
• Re: Clock Source in hrtimer
  • From: "wilbur.chan" <wilbur512@xxxxxxxxx>
• Re: Clock Source in hrtimer
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Clock Source in hrtimer
  • From: "wilbur.chan" <wilbur512@xxxxxxxxx>
• [PATCH] MIPS: TX49xx: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: [PATCH] cavium-octeon: determine if helper should build
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] cavium-octeon: determine if helper should build
  • From: Andreas Bießmann <biessmann@xxxxxxxxxxxxx>
• Re: [PATCH 5/5] drivers/serial: Return -ENOMEM on memory allocation failure
  • From: Patrick Gefre <pfg@xxxxxxx>
• Re: [PATCH 5/5] drivers/serial: Return -ENOMEM on memory allocation failure
  • From: Julia Lawall <julia@xxxxxxx>
• [PATCH 5/5] drivers/serial: Return -ENOMEM on memory allocation failure
  • From: Julia Lawall <julia@xxxxxxx>
• Re: [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: David Daney <david.s.daney@xxxxxxxxx>
• [PATCH] MIPS: remove RELOC_HIDE on __pa_symbol
  • From: Namhyung Kim <namhyung@xxxxxxxxx>
• Re: [PATCH v6 2/7] MIPS: use generic atomic64 in non-64bit kernels
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: RM7000: Symbol should be static
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/42] arch/mips/kernel: Adjust confusing if indentation
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 01/15] arch: mips: kernel: Fix a typo.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: RM7000: Symbol should be static
  • From: Ricardo Mendoza <ricmm@xxxxxxxxxx>
• RE: file corruption with highmem kernel
  • From: "Anoop P.A." <Anoop_P.A@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove unused task_struct.trap_no field.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 2/42] arch/mips/kernel: Adjust confusing if indentation
  • From: Julia Lawall <julia@xxxxxxx>
• Re: file corruption with highmem kernel
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 15/17] kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  • From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
• [PATCH 05/17] kgdb,mips: Individual register get/set for mips
  • From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
• RE: file corruption with highmem kernel
  • From: "Anoop P.A." <Anoop_P.A@xxxxxxxxxxxxxx>
• [PATCH 01/15] arch: mips: kernel: Fix a typo.
  • From: Andrea Gelmini <andrea.gelmini@xxxxxxxxx>
• Re: [PATCH 2/2][MIPS] USB/PowerTV: Separate PowerTV USB support from non-USB code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v4] MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH v2] MIPS: Unify the suffix of compressed vmlinux.bin
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Clean up arch/mips/boot/compressed/ld.script
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Clean up arch/mips/boot/compressed/ld.script
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH 2/2][MIPS] USB/PowerTV: Separate PowerTV USB support from non-USB code
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [Q] enabling FPU for vpe1
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH] MIPS: strip the un-needed sections of vmlinuz
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v4] MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Clean up arch/mips/boot/compressed/decompress.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Clean up arch/mips/boot/compressed/ld.script
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2][MIPS] USB/PowerTV: Separate PowerTV USB support from non-USB code
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] PowerTV: add Gaia platform definitions
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: BCM47xx: nvram_getenv fix return value.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MMC: jz4740: Fixed card change detection.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Clean up notify_die() usage.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] documentation: Mention that KProbes is supported on MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] samples: kprobe_example: Make it print something on MIPS.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: KProbes: Use flush_insn_slot() where possible.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] MIPS: Add KProbe support.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Add instrunction format for BREAK and SYSCALL
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Define regs_return_value()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Remove unused task_struct.trap_no field.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Allow more than 3.75GB of memory with PCIe
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [Q] enabling FPU for vpe1
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: Additional fix : (was [v2]printk: fix delayed messages from CPU hotplug events)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: Additional fix : (was [v2]printk: fix delayed messages from CPU hotplug events)
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [Q] enabling FPU for vpe1
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [Q] enabling FPU for vpe1
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• [Q] enabling FPU for vpe1
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH 0/5] KProbes support for MIPS
  • From: Ananth N Mavinakayanahalli <ananth@xxxxxxxxxx>
• [PATCH] MIPS: Clean up notify_die() usage.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Remove unused task_struct.trap_no field.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: KProbes: Use flush_insn_slot() where possible.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Add instrunction format for BREAK and SYSCALL
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Add instrunction format for BREAK and SYSCALL
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Define regs_return_value()
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MIPS: Define regs_return_value()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: mips, eglibc, and toolchain compilation error
  • From: <Ryan_D_Phillips@xxxxxxxx>
• Re: mips, eglibc, and toolchain compilation error
  • From: Jan Rovins <janr@xxxxxxxx>
• Re: mips, eglibc, and toolchain compilation error
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• mips, eglibc, and toolchain compilation error
  • From: <Ryan_D_Phillips@xxxxxxxx>
• [PATCH 4/5] samples: kprobe_example: Make it print something on MIPS.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] documentation: Mention that KProbes is supported on MIPS
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] MIPS: Define regs_return_value()
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] MIPS: Add KProbe support.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] MIPS: Add instrunction format for BREAK and SYSCALL
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] KProbes support for MIPS
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MMC: jz4740: Fixed card change detection.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/2][MIPS] USB/PowerTV: Separate PowerTV USB support from non-USB code
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• [PATCH 1/2][USB] USB/PowerTV: Add support for PowerTV USB interface
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• [PATCH] MIPS: BCM47xx: nvram_getenv fix return value.
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 2/4] MIPS: BCM47xx: Fill values for b43 into ssb sprom
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• Re: [PATCH 2/4] MIPS: BCM47xx: Fill values for b43 into ssb sprom
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH][MIPS] PowerTV: add Gaia platform definitions
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH] OCTEON: workaround linking failures with gcc-4.4.x 32-bits toolchains
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] MIPS: BCM47xx: Setup and register serial early
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] MIPS: BCM47xx: Fill values for b43 into ssb sprom
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS: BCM47xx: Really fix 128MB RAM problem
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] OCTEON: workaround linking failures with gcc-4.4.x 32-bits toolchains
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Fix n32 syscall number comments.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 05/15] mips,kgdb: Individual register get/set for mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• file corruption with highmem kernel
  • From: "Anoop P.A." <Anoop_P.A@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Add watchdog driver for OCTEON SOCs (v2).
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] watchdog: Add watchdog driver for OCTEON SOCs (v2).
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• [PATCH 05/15] mips,kgdb: Individual register get/set for mips
  • From: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
• [196/205] MIPS: MTX-1: Fix PCI on the MeshCube and related boards
  • From: Greg KH <gregkh@xxxxxxx>
• Need help in analyzing lockup on Octeon cores
  • From: Sowmya Sridharan <sowmya.sridharan@xxxxxxx>
• PCI issues on Malta / 20Kc / Bonito64
  • From: Thomas Schwinge <thomas@xxxxxxxxxxxxxxxx>
• [PATCH] Update MIPS Linux syscalls to match 2.6.35-rc6+
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Fix n32 syscall number comments.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] MIPS: PowerTV: Add device tree support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 7/7] watchdog: Add watchdog driver for OCTEON SOCs.
  • From: Wim Van Sebroeck <wim@xxxxxxxxx>
• Re: [PATCH v2] MIPS: Unify the suffix of compressed vmlinux.bin
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH v2 2/3] MIPS: cavium-octeon: rewrite the sched_clock() based on mips_cyc2ns()
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] OCTEON: workaround linking failures with gcc-4.4.x 32-bits toolchains
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] OCTEON: workaround linking failures with gcc-4.4.x 32-bits toolchains
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: "Dezhong Diao (dediao)" <dediao@xxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] MIPS: PowerTV: Add device tree support
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCH 4/4] MIPS: BCM47xx: Setup and register serial early
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v2 2/2] MIPS: PowerTV: Add device tree support
  • From: Dezhong Diao <dediao@xxxxxxxxx>
• [PATCH v2 1/2] MIPS: Add device tree support to MIPS
  • From: Dezhong Diao <dediao@xxxxxxxxx>
• [PATCH 4/4] MIPS: BCM47xx: Setup and register serial early
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 3/4] MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 2/4] MIPS: BCM47xx: Fill values for b43 into ssb sprom
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 1/4] MIPS: BCM47xx: Really fix 128MB RAM problem
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 0/4] MIPS: BCM47xx: Platfrom updates from OpenWRT
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 0/4] MIPS: BCM47xx: Platfrom updates from OpenWRT
  • From: Hauke Mehrtens <hauke@xxxxxxxxxx>
• [PATCH 1/2] MIPS: Octeon: Support 256 MSI on PCIe
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] OCTEON MSI improvements.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Fix build error in cavium-octeon/cpu.c
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: Problems with BCM91125E
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Apply kmap_high_get on DMA functions.
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH] MIPS: Decode core number for R2 CPUs.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: Octeon: Fix build error in cavium-octeon/cpu.c
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] MIPS: Apply kmap_high_get on DMA functions.
  • From: "Dezhong Diao (dediao)" <dediao@xxxxxxxxx>
• Problems with BCM91125E
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH] mips: Set io_map_base for several PCI bridges lacking it
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Octeon: Implement delays with cycle counter.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 03/11] arch/mips/kernel/smtc.c: formatting of pointers in printk()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] watchdog: Add watchdog driver for OCTEON SOCs (v2).
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] watchdog: Add watchdog driver for OCTEON SOCs.
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• Re: [PATCH 7/7] watchdog: Add watchdog driver for OCTEON SOCs.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Apply kmap_high_get on DMA functions.
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 6/7] MIPS: Define ST0_NMI in asm/mipsregs.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] MIPS: Export __cpu_number_map and __cpu_logical_map.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] MIPS: Octeon: Export prom_putchar().
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/7] MIPS: Add option to export uasm API.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/7] MIPS: Add BBIT0 and BBIT1 instructions to uasm
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] MIPS: Add drotr32 and uasm_i_drotr_safe to uasm.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Apply kmap_high_get on DMA functions.
  • From: Dezhong Diao <dediao@xxxxxxxxx>
• [PATCH 7/7] watchdog: Add watchdog driver for OCTEON SOCs.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/7] MIPS: Add option to export uasm API.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/7] MIPS: Export __cpu_number_map and __cpu_logical_map.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 6/7] MIPS: Define ST0_NMI in asm/mipsregs.h
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/7] MIPS: Octeon: Export prom_putchar().
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/7] MIPS: Add BBIT0 and BBIT1 instructions to uasm
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/7] MIPS: Add drotr32 and uasm_i_drotr_safe to uasm.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/7] Watchdog driver for Octeon SOCs.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] MIPS: Loongson: Lemote-2F: remove un-used macro LOONGSON_PERFCNT_IRQ
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH 1/3] MIPS: Loongson: Remove set_irq_trigger_mode()
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH 2/3] MIPS: Loongson: Oprofile: add a new do_perfcnt_IRQ()
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH 3/3] MIPS: Octeon: HOTPLUG_CPU fixes.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] MIPS: Octeon: Simplify hotcpu_notifier registration.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] MIPS: Octeon: Clean up SMP CPU numbering.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] MIPS: Octeon: Make MSI use handle_simple_irq().
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] MIPS: Octeon: Get rid of a bunch of MSI IRQ number definitions.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] MIPS: Octeon: Fix fixup_irqs for HOTPLUG_CPU
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/5] MIPS: Octeon: Improve interrupt handling.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MIPS: Octeon: Move MSI code out of octeon-irq.c.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3] mips/alchemy: add basic support for the GPR board
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH 3/3] MIPS: Octeon: HOTPLUG_CPU fixes.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] Octeon SMP initialization and HOTPLUG_CPU fixes.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] MIPS: Octeon: Simplify hotcpu_notifier registration.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] MIPS: Octeon: Clean up SMP CPU numbering.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] MIPS: Octeon: Make MSI use handle_simple_irq().
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] MIPS: Octeon: Get rid of a bunch of MSI IRQ number definitions.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] MIPS: Octeon: Fix fixup_irqs for HOTPLUG_CPU
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] MIPS: Octeon: Improve interrupt handling.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] Interrupt handling improvements for OCTEON
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] MIPS: Octeon: Move MSI code out of octeon-irq.c.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] serial: 8250: remove SERIAL_8250_AU1X00
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] serial: 8250: remove SERIAL_8250_AU1X00
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: define eth platform devices in the correct order
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: RM7000: Make use of cache_op() instead of inline asm
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: RM7000: Add support for tertiary cache
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: tracing: Fix the indentation of mcount.S
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Enable heap randomization.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Randomize mmap if randomize_va_space is set
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] BCM63XX: prevent second enet registration on BCM6338
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] au1000_eth: get ethernet address from platform_data
  • From: David Miller <davem@xxxxxxxxxxxxx>
• [PATCH] MIPS: Quit using undefined behavior of ADDU in 64-bit atomic operations.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] BCM63XX: prevent second enet registration on BCM6338
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH] au1000_eth: get ethernet address from platform_data
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2] au1000_eth: get ethernet address from platform_data
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2] au1000_eth: get ethernet address from platform_data
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [RFC PATCH v2] au1000_eth: get ethernet address from platform_data
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Randomize mmap if randomize_va_space is set
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: Enable heap randomization.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] MIPS memory space randomization
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2] au1000_eth: get ethernet address from platform_data
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [RFC PATCH v2] au1000_eth: get ethernet address from platform_data
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 2/2] MIPS: RM7000: Add support for tertiary cache
  • From: Ricardo Mendoza <ricmm@xxxxxxxxxx>
• [PATCH 1/2] MIPS: RM7000: Make use of cache_op() instead of inline asm
  • From: Ricardo Mendoza <ricmm@xxxxxxxxxx>
• [PATCH 0/2] MIPS: RM7000: Tertiary cache support
  • From: Ricardo Mendoza <ricmm@xxxxxxxxxx>
• Re: [PATCH v3] MTD: Nand: Add JZ4740 NAND driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] MTD: Nand: Add JZ4740 NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH] MIPS: tracing: Fix the indentation of mcount.S
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [RFC PATCH] au1000_eth: get ethernet address from platform_data
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: define eth platform devices in the correct order
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: define eth platform devices in the correct order
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: define eth platform devices in the correct order
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] mips/alchemy: define eth platform devices in the correct order
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH v3] MIPS: JZ4740: Add qi_lb60 board support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MTD: Nand: Add JZ4740 NAND driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] fbdev: Add JZ4740 framebuffer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MIPS: JZ4740: Add platform devices
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4] MIPS: JZ4740: Add PWM support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MIPS: JZ4740: Add gpio support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v4] MIPS: JZ4740: Add clock API support.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MIPS: jz4740: Add IRQ handler code
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6] MMC: Add JZ4740 mmc driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/2] serial: 8250: remove SERIAL_8250_AU1X00
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH v3] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [no subject]
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [Kernel Oops] Cavium Octeon, linux 2.6.34
  • From: Zhuang Yuyao <mlistz@xxxxxxxxx>
• Re: [PATCH v2] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mips/alchemy: add basic support for the GPR board
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 03/11] arch/mips/kernel/smtc.c: formatting of pointers in printk()
  • From: Kulikov Vasiliy <segooon@xxxxxxxxx>
• Re: [PATCH v2] mips/alchemy: add basic support for the GPR board
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• [PATCH v2] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH] mips/alchemy: add basic support for the GPR board
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] mips/alchemy: add basic support for the GPR board
  • From: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
• Re: [PATCH v3] MFD: Add JZ4740 ADC driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v5] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v5] MMC: Add JZ4740 mmc driver
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH v5] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v4] MMC: Add JZ4740 mmc driver
  • From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
• [PATCH v4] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [PATCH 1/2] MIPS: PowerTV: Provide cpu-feature-overrides.h
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [PATCH 0/2] MIPS: cpu-feature-overrides patches
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [PATCH v3] MFD: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH] MIPS: MTX-1: fix PCI on the MeshCube and related boards
  • From: Bruno Randolf <randolf.bruno@xxxxxxxxxxxxxx>
• Re: IP22 Debian Install
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: MTX-1: cleanup and comments
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: MTX-1: fix PCI on the MeshCube and related boards
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: MTX-1: cleanup and comments
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: MTX-1: fix PCI on the MeshCube and related boards
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• [PATCH 2/2] MIPS: MTX-1: cleanup and comments
  • From: Bruno Randolf <randolf.bruno@xxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: MTX-1: fix PCI on the MeshCube and related boards
  • From: Bruno Randolf <randolf.bruno@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• Re: [PATCH] tracing: recordmcount.pl: Fix $mcount_regex for MIPS.
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH] tracing: recordmcount.pl: Fix $mcount_regex for MIPS.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] tracing: recordmcount.pl: Fix $mcount_regex for MIPS.
  • From: Steven Rostedt <rostedt@xxxxxxxxxxx>
• [PATCH] tracing: recordmcount.pl: Fix $mcount_regex for MIPS.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• IP22 Debian Install
  • From: Chris Rhodin <chris@xxxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Jaya Kumar <jayakumar.lkml@xxxxxxxxx>
• Re: Questions about BCM91250A
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Questions about BCM91250A
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: NET: SB1250: Initialize .owner
  • From: David Miller <davem@xxxxxxxxxxxxx>
• NET: SB1250: Initialize .owner
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] MIPS: EMMA2RH: Replace EMMA2RH_SW_IRQ_INTxx with EMMA2RH_SW_IRQ(n)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] MIPS: EMMA2RH: Replace EMMA2RH_IRQ_INTxx with EMMA2RH_IRQ_INT(n)
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] MIPS: EMMA2RH: Remove EMMA2RH_CPU_CASCADE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MIPS: EMMA2RH: Remove useless CPU_IRQ_BASE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Make init_vdso a subsys_initcall.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Get rid of useless 'init_vdso successfully' message.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] MIPS: Octeon: Define ARCH_HAS_USABLE_BUILTIN_POPCOUNT for OCTEON.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] MIPS: Create and use asm/arch_hweight.h
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Alchemy: fix deprecated compile warnings
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• New stable kernels
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: AR7: rewrite of cpmac_get_mac()
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: why I receive tlb exception in kernel mode?
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• why I receive tlb exception in kernel mode?
  • From: loody <miloody@xxxxxxxxx>
• Re: [NET] ioc3-eth: Use the instance of net_device_stats from net_device.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH] Configuration changes to go along with simplified command line manipulation
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] MIPS: AR7: rewrite of cpmac_get_mac()
  • From: Alexander Clouter <alex@xxxxxxxxxxxxx>
• Re: [PATCH v2 22/26] MFD: Add JZ4740 ADC driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 22/26] MFD: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 22/26] MFD: Add JZ4740 ADC driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: Issue with RLIMIT Identifiers
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• [NET] ioc3-eth: Use the instance of net_device_stats from net_device.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] ioc3-eth: Use the instance of net_device_stats from net_device.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• [PATCH] ioc3-eth: Use the instance of net_device_stats from net_device.
  • From: Kulikov Vasiliy <segooon@xxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH][MIPS] powertv: move device address setup before use
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 9/9] Removing dead CONFIG_MTD_PMC_MSP_RAMROOT
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 8/9] Removing dead CONFIG_DIAGNOSTICS
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 7/9] Removing dead CONFIG_PMCTWILED
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 6/9] Removing dead CONFIG_I2C_PNX0105
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 5/9] Removing dead CONFIG_BLK_DEV_IDE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Issue with RLIMIT Identifiers
  • From: adnan iqbal <adnan.iqbal@xxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• Re: [PATCH v2 22/26] MFD: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• RE: [PATCH] Apply kmap_high_get with MIPS
  • From: "Dezhong Diao (dediao)" <dediao@xxxxxxxxx>
• RE: [PATCH] Apply kmap_high_get with MIPS
  • From: "Dezhong Diao (dediao)" <dediao@xxxxxxxxx>
• [PATCH] Configuration changes to go along with simplified command line manipulation
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH v3] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [Kernel Oops] Cavium Octeon, linux 2.6.34
  • From: Zhuang Yuyao <mlistz@xxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] MMC: Add JZ4740 mmc driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] Removing dead CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: How to detect STACKOVEFLOW on mips
  • From: Phil Staub <phils@xxxxxxxxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Jiri Kosina <jkosina@xxxxxxx>
• How to detect STACKOVEFLOW on mips
  • From: Adam Jiang <jiang.adam@xxxxxxxxx>
• Re: [PATCH v3] MMC: Add JZ4740 mmc driver
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/9] Removing dead CONFIG_GDB_CONSOLE
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] Removing dead CONFIG_SOC_AU1000_FREQUENCY
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] netdev: mdio-octeon: Fix section mismatch errors.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] netdev: octeon_mgmt: Fix section mismatch errors.
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v2 24/26] power: Add JZ4740 battery driver.
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [BUG] Cavium OCTEON strange illegal instruction
  • From: Yang Shi <yang.shi@xxxxxxxxxxxxx>
• Re: some question about wmb in mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: some question about wmb in mips
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [BUG] Cavium OCTEON strange illegal instruction
  • From: Yang Shi <yang.shi@xxxxxxxxxxxxx>
• Re: [BUG] Cavium OCTEON strange illegal instruction
  • From: Yang Shi <yang.shi@xxxxxxxxxxxxx>
• Re: [BUG] Cavium OCTEON strange illegal instruction
  • From: Yang Shi <yang.shi@xxxxxxxxxxxxx>
• [PATCH v3 03/26] MIPS: JZ4740: Add clock API support.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3 10/26] MIPS: JZ4740: Add PWM support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] MIPS: Loongson: irq.c: Misc cleanups
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• Re: some question about wmb in mips
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• some question about wmb in mips
  • From: loody <miloody@xxxxxxxxx>
• [PATCH] MIPS: Loongson: irq.c: Misc cleanups
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [PATCH] MIPS: PowerTV: Use fls() carefully where static optimization is required
  • From: Shinya Kuribayashi <skuribay@xxxxxxxxx>
• [BUG] Cavium OCTEON strange illegal instruction
  • From: Zhuang Yuyao <mlistz@xxxxxxxxx>
• Re: [PATCH v2 24/26] power: Add JZ4740 battery driver.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [BUG] cavium octeon kernel bug detected under stress test
  • From: Zhuang Yuyao <mlistz@xxxxxxxxx>
• [PATCH 2/2] MIPS: Octeon: Define ARCH_HAS_USABLE_BUILTIN_POPCOUNT for OCTEON.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] arch_hweight implementation for MIPS
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Create and use asm/arch_hweight.h
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] Fix some section mismatch errors for Octeon network drivers
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] netdev: octeon_mgmt: Fix section mismatch errors.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] netdev: mdio-octeon: Fix section mismatch errors.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: Alchemy: fix deprecated compile warnings
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH] MIPS: Alchemy: fix deprecated compile warnings
  • From: FUJITA Tomonori <fujita.tomonori@xxxxxxxxxxxxx>
• Re: soft-float
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• RE: soft-float
  • From: "Jabir M" <Jabir_M@xxxxxxxxxxxxxx>
• Re: [PATCH v4] alsa: ASoC: Add JZ4740 codec driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] alsa: ASoC: Add JZ4740 codec driver
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] RTC: Add JZ4740 RTC driver
  • From: Alessandro Zummo <a.zummo@xxxxxxxxxxxx>
• [PATCH v4] alsa: ASoC: Add JZ4740 codec driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• RE: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: "Jan Rovins" <janr@xxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Xiangfu Liu <xiangfu.z@xxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3] alsa: ASoC: Add JZ4740 codec driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
• Re: [lm-sensors] [PATCH v4] hwmon: Add JZ4740 ADC driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [rtc-linux] [PATCH v3] RTC: Add JZ4740 RTC driver
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [rtc-linux] [PATCH v3] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [rtc-linux] [PATCH v3] RTC: Add JZ4740 RTC driver
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• [PATCH v4] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: Jan Rovins <janr@xxxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 19/26] USB: Add JZ4740 ohci support
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [lm-sensors] [PATCH v3] hwmon: Add JZ4740 ADC driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2 18/26] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] alsa: ASoC: JZ4740: Add qi_lb60 board driver
  • From: 1276924111-11158-27-git-send-email-lars@xxxxxxxxxx
• [PATCH v3] alsa: ASoC: Add JZ4740 ASoC support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] alsa: ASoC: Add JZ4740 codec driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v3] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 18/26] MMC: Add JZ4740 mmc driver
  • From: Matt Fleming <matt@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Wan ZongShun <mcuos.com@xxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [lm-sensors] [PATCH v2 23/26] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [lm-sensors] [PATCH v2 23/26] hwmon: Add JZ4740 ADC driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2 26/26] alsa: ASoC: JZ4740: Add qi_lb60 board driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 25/26] MIPS: JZ4740: Add qi_lb60 board support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 24/26] power: Add JZ4740 battery driver.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 23/26] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 22/26] MFD: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 21/26] alsa: ASoC: Add JZ4740 ASoC support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 20/26] alsa: ASoC: Add JZ4740 codec driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 19/26] USB: Add JZ4740 ohci support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 18/26] MMC: Add JZ4740 mmc driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 16/26] fbdev: Add JZ4740 framebuffer driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 15/26] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 14/26] MIPS: JZ4740: Add Kbuild files
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 13/26] MIPS: JZ4740: Add platform devices
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 12/26] MIPS: JZ4740: Add prom support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 11/26] MIPS: JZ4740: Add serial support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 10/26] MIPS: JZ4740: Add PWM support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 09/26] MIPS: JZ4740: Add DMA support.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 08/26] MIPS: JZ4740: Add gpio support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 07/26] MIPS: JZ4740: Add setup code
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 06/26] MIPS: JZ4740: Add power-management and system reset support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 05/26] MIPS: JZ4740: Add clocksource/clockevent support.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 04/26] MIPS: JZ4740: Add timer support
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 03/26] MIPS: JZ4740: Add clock API support.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 00/26] Add support for the Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 01/26] MIPS: Add base support for Ingenic JZ4740 System-on-a-Chip
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH v2 02/26] MIPS: jz4740: Add IRQ handler code
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH][MIPS] powertv: move device address setup before use
  • From: David VomLehn <dvomlehn@xxxxxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v4 00/16] Cleanup Lemote FuLoong2e Support
  • From: Stuart Longland <redhatter@xxxxxxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: "Gleb O. Raiko" <raiko@xxxxxxxxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: "Gleb O. Raiko" <raiko@xxxxxxxxxxxx>
• Re: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re: Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Help with decoding a NMI Watchdog interrupt on an Octeon
  • From: Jan Rovins <janr@xxxxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: Jesper Nilsson <jesper@xxxxxx>
• Re: MIPS: return after handling coprocessor 2 exception
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: zboot for brcm
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• MIPS: return after handling coprocessor 2 exception
  • From: Jesper Nilsson <jesper@xxxxxx>
• Re: zboot for brcm
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: zboot for brcm
  • From: wu zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH 4/4] MIPS: EMMA2RH: Replace EMMA2RH_SW_IRQ_INTxx with EMMA2RH_SW_IRQ(n)
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• [PATCH 3/4] MIPS: EMMA2RH: Replace EMMA2RH_IRQ_INTxx with EMMA2RH_IRQ_INT(n)
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• [PATCH 2/4] MIPS: EMMA2RH: Remove EMMA2RH_CPU_CASCADE
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• [PATCH 1/4] MIPS: EMMA2RH: Remove useless CPU_IRQ_BASE
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• [PATCH] EMMA2RH: tivial cleanups
  • From: Shinya Kuribayashi <shinya.kuribayashi.px@xxxxxxxxxxx>
• Re: [PATCH v4 00/16] Cleanup Lemote FuLoong2e Support
  • From: Stuart Longland <redhatter@xxxxxxxxxx>
• Re: [PATCH v4 00/16] Cleanup Lemote FuLoong2e Support
  • From: Stuart Longland <redhatter@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Make init_vdso a subsys_initcall.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] MIPS vdso fixes.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: Get rid of useless 'init_vdso successfully' message.
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] Removing dead CONFIG_BLK_DEV_IDE
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH] MIPS: strip the un-needed sections of vmlinuz
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] MIPS: Clean up arch/mips/boot/compressed/decompress.c
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• [PATCH] MIPS: Clean up arch/mips/boot/compressed/ld.script
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• [PATCH 2/2] MIPS: Kretprobe support
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• [PATCH 1/2] MIPS: KProbes Support
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• [PATCH 0/2] MIPS: Kprobes and Kretprobes Support
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• Re: [PATCH] mtd: Fix bug using smp_processor_id() in preemptible ubi_bgt1d kthread
  • From: Philby John <pjohn@xxxxxxxxxx>
• Re: Do I Need to enable or set l2 cache in mips for linux work
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: [PATCH] mtd: Fix bug using smp_processor_id() in preemptible ubi_bgt1d kthread
  • From: Philby John <pjohn@xxxxxxxxxx>
• Re: [RFC][PATCH 23/26] power: Add JZ4740 battery driver.
  • From: Anton Vorontsov <cbouatmailru@xxxxxxxxx>
• Re: [PATCH] mtd: Fix bug using smp_processor_id() in preemptible ubi_bgt1d kthread
  • From: Philby John <pjohn@xxxxxxxxxx>
• Re: [PATCH] mtd: Fix bug using smp_processor_id() in preemptible ubi_bgt1d kthread
  • From: Jamie Lokier <jamie@xxxxxxxxxxxxx>
• [PATCH] mtd: Fix bug using smp_processor_id() in preemptible ubi_bgt1d kthread
  • From: Philby John <pjohn@xxxxxxxxxx>
• [PATCH] mips: Set io_map_base for several PCI bridges lacking it
  • From: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
• Do I Need to enable or set l2 cache in mips for linux work
  • From: loody <miloody@xxxxxxxxx>
• Re: [RFC][PATCH 17/26] MTD: Nand: Add JZ4740 NAND driver
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• [PATCH] MIPS: Kprobe support v0.2 This incorporates some of the comments from Daney.
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• [PATCH][UPDATED] MIPS: Kprobe support v0.2
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• Re:
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• Re:
  • From: "Kevin D. Kissell" <kevink@xxxxxxxxxxxxx>
• Re:
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re:
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [no subject]
  • From: "Jabir M" <Jabir_M@xxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: KProbes support v0.1
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] Removing dead CONFIG_PMCTWILED
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH 5/9] Removing dead CONFIG_BLK_DEV_IDE
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: [PATCH 9/9] Removing dead CONFIG_MTD_PMC_MSP_RAMROOT
  • From: Shane McDonald <mcdonald.shane@xxxxxxxxx>
• Re: zboot for brcm
  • From: Wu Zhangjin <wuzhangjin@xxxxxxxxx>
• Re: [PATCH v6 2/7] MIPS: use generic atomic64 in non-64bit kernels
  • From: David Daney <david.s.daney@xxxxxxxxx>
• Re: [PATCH 2/9] Removing dead CONFIG_GDB_CONSOLE
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: Cross compiling MIPS kernel under x86
  • From: octane indice <octane@xxxxxxxxxx>
• Re: [PATCH 6/9] Removing dead CONFIG_I2C_PNX0105
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxxxxxxx>
• [PATCH 9/9] Removing dead CONFIG_MTD_PMC_MSP_RAMROOT
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 8/9] Removing dead CONFIG_DIAGNOSTICS
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 7/9] Removing dead CONFIG_PMCTWILED
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 6/9] Removing dead CONFIG_I2C_PNX0105
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 5/9] Removing dead CONFIG_BLK_DEV_IDE
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 4/9] Removing dead CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 3/9] Removing dead CONFIG_SIBYTE_BCM1480_PROF
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 2/9] Removing dead CONFIG_GDB_CONSOLE
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 1/9] Removing dead CONFIG_SOC_AU1000_FREQUENCY
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH 0/9] Removing dead code
  • From: Christoph Egger <siccegge@xxxxxxxxx>
• [PATCH v6 7/7] MIPS: define local_xchg from xchg_local to atomic_long_xchg
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 6/7] MIPS: add support for hardware performance events (mipsxx)
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 4/7] MIPS: add support for hardware performance events (skeleton)
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 3/7] MIPS: add support for software performance events
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 5/7] MIPS/Perf-events: add callchain support
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 2/7] MIPS: use generic atomic64 in non-64bit kernels
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 1/7] MIPS/Oprofile: extract PMU defines/helper functions for sharing
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• [PATCH v6 0/7] MIPS performance event support v6
  • From: Deng-Cheng Zhu <dengcheng.zhu@xxxxxxxxx>
• Re: Cross compiling MIPS kernel under x86
  • From: "Phil Staub" <phils@xxxxxxxxxxxxx>
• Re: [PATCH] MIPS: KProbes support v0.1
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• [PATCH] MIPS: Add NVRAM support for bcm47xx devices
  • From: Waldemar Brodkorb <mips@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MIPS: KProbes support v0.1
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• [PATCH] MIPS: KProbes support v0.1
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• [PATCH] Kprobes support for MIPS architecture.
  • From: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
• Re: info needed for check_bugs
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• info needed for check_bugs
  • From: naveen yadav <yad.naveen@xxxxxxxxx>
• Re: [Q] MIPS: How to record the user stack backtrace in the kernel
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• Re: Details of MIPS(Octeon) system call semantics
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCH v4] printk: fix delayed messages from CPU hotplug events
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH v3] printk: fix delayed messages from CPU hotplug events
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [lm-sensors] [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [lm-sensors] [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [rtc-linux] [RFC][PATCH 15/26] RTC: Add JZ4740 RTC driver
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [RFC][PATCH 22/26] hwmon: Add JZ4740 ADC driver
  • From: Jonathan Cameron <kernel@xxxxxxxxxxxxxxxxxxxxx>