V2:
Synchronize with test-devicetree branch of device tree.
V1:
Add device tree support for PowerTV.
Customize user-defined memory scan function.
Signed-off-by: Dezhong Diao <dediao@xxxxxxxxx>
---
arch/mips/configs/powertv_defconfig | 293 +++++++++++++++++++++-------
arch/mips/include/asm/mach-powertv/asic.h | 8 +-
arch/mips/include/asm/mach-powertv/mdesc.h | 51 +++++
arch/mips/powertv/Makefile | 2 +-
arch/mips/powertv/asic/asic_devices.c | 22 --
arch/mips/powertv/mdesc.c | 224 +++++++++++++++++++++
arch/mips/powertv/memory.c | 242 ++++++++++++++---------
7 files changed, 649 insertions(+), 193 deletions(-)
create mode 100644 arch/mips/include/asm/mach-powertv/mdesc.h
create mode 100644 arch/mips/powertv/mdesc.c
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
index 7291633..7a3bfd2 100644
--- a/arch/mips/configs/powertv_defconfig
+++ b/arch/mips/configs/powertv_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc5
-# Fri Aug 28 14:49:33 2009
+# Linux kernel version: 2.6.35-rc3
+# Tue Jul 27 16:27:08 2010
#
CONFIG_MIPS=y
@@ -11,11 +11,12 @@ CONFIG_MIPS=y
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
+# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
-# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
@@ -50,7 +51,6 @@ CONFIG_POWERTV=y
# CONFIG_MIN_RUNTIME_RESOURCES is not set
# CONFIG_BOOTLOADER_DRIVER is not set
CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_CSRC_POWERTV=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -65,9 +65,9 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_CEVT_R4K_LIB=y
CONFIG_CEVT_R4K=y
+CONFIG_CSRC_POWERTV=y
CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_EARLY_PRINTK is not set
+CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_NO_IOPORT is not set
CONFIG_CPU_BIG_ENDIAN=y
@@ -79,7 +79,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
-# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_LOONGSON2E is not set
+# CONFIG_CPU_LOONGSON2F is not set
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
# CONFIG_CPU_MIPS64_R1 is not set
@@ -122,7 +123,7 @@ CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_MIPSR2_IRQ_VI=y
CONFIG_CPU_MIPSR2_IRQ_EI=y
CONFIG_CPU_HAS_SYNC=y
@@ -144,8 +145,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
@@ -165,6 +165,8 @@ CONFIG_HZ=1000
CONFIG_PREEMPT=y
# CONFIG_KEXEC is not set
# CONFIG_SECCOMP is not set
+CONFIG_USE_OF=y
+CONFIG_ARCH_HAS_DEVTREE_MEM=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -177,6 +179,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SWAP is not set
@@ -190,19 +193,15 @@ CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
@@ -211,6 +210,7 @@ CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -234,18 +234,16 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
#
@@ -253,7 +251,7 @@ CONFIG_HAVE_OPROFILE=y
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
@@ -271,15 +269,41 @@ CONFIG_LBDAF=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@@ -289,7 +313,6 @@ CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@@ -318,7 +341,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@@ -390,12 +412,26 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
CONFIG_NETFILTER_XTABLES=y
+
+#
+# Xtables combined modules
+#
+# CONFIG_NETFILTER_XT_MARK is not set
+
+#
+# Xtables targets
+#
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+
+#
+# Xtables matches
+#
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
@@ -465,10 +501,13 @@ CONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
+# CONFIG_L2TP is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
+CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -526,10 +565,21 @@ CONFIG_NET_SCH_FIFO=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+
+#
+# Some wireless drivers require a rate control algorithm
+#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
+# CONFIG_CAIF is not set
#
# Device Drivers
@@ -539,6 +589,7 @@ CONFIG_NET_SCH_FIFO=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -550,9 +601,9 @@ CONFIG_EXTRA_FIRMWARE=""
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
@@ -568,6 +619,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_SM_FTL is not set
# CONFIG_MTD_OOPS is not set
#
@@ -611,11 +663,16 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_SM_COMMON is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018
CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_RICOH is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
# CONFIG_MTD_NAND_NANDSIM is not set
@@ -632,6 +689,18 @@ CONFIG_MTD_NAND_IDS=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
+CONFIG_DTC=y
+CONFIG_OF=y
+
+#
+# Flattened Device Tree and Open Firmware support
+#
+# CONFIG_PROC_DEVICETREE is not set
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_DEVICE=y
+# CONFIG_OF_DEVICE_CLAIM_RESOURCES is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
@@ -641,6 +710,10 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
@@ -658,6 +731,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
+CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@@ -693,64 +767,95 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
+
+#
+# Controllers with non-SFF native interface
+#
# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_AHCI_PLATFORM is not set
+# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
+
+#
+# SFF controllers with custom DMA interface
+#
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_ATA_BMDMA=y
+
+#
+# SATA SFF controllers with BMDMA
+#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
+
+#
+# PATA SFF controllers with BMDMA
+#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
+
+#
+# PIO-only SFF controllers
+#
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
+# CONFIG_PATA_RZ1000 is not set
+
+#
+# Generic fallback / legacy drivers
+#
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -763,7 +868,7 @@ CONFIG_ATA_SFF=y
#
#
-# See the help texts for more information.
+# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
@@ -787,6 +892,7 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
+# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@@ -800,6 +906,7 @@ CONFIG_MII=y
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
@@ -829,6 +936,8 @@ CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+CONFIG_CHELSIO_T4_DEPENDS=y
+# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@@ -841,16 +950,16 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+CONFIG_WLAN=y
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -864,6 +973,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_IPHETH is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
@@ -873,6 +983,7 @@ CONFIG_USB_RTL8150=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@@ -882,6 +993,7 @@ CONFIG_USB_RTL8150=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -913,6 +1025,7 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_VT is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
#
@@ -924,6 +1037,10 @@ CONFIG_INPUT_EVDEV=y
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+# CONFIG_SERIAL_ALTERA_JTAGUART is not set
+# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
@@ -934,6 +1051,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
+# CONFIG_RAMOOPS is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
@@ -945,7 +1063,6 @@ CONFIG_DEVPORT=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@@ -953,20 +1070,23 @@ CONFIG_SSB_POSSIBLE=y
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
+CONFIG_MFD_SUPPORT=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_ABX500_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_MFD_RDC321X is not set
+# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
+CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -980,7 +1100,6 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
@@ -993,31 +1112,43 @@ CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CANDO is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EGALAX is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MOSART is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_PICOLCD is not set
+# CONFIG_HID_QUANTA is not set
+# CONFIG_HID_ROCCAT is not set
+# CONFIG_HID_ROCCAT_KONE is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
+# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1032,7 +1163,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
@@ -1050,6 +1180,7 @@ CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1133,6 +1264,7 @@ CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
@@ -1146,6 +1278,8 @@ CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
+# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
@@ -1158,7 +1292,6 @@ CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@@ -1171,7 +1304,6 @@ CONFIG_USB_SERIAL_CP210X=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@@ -1189,10 +1321,6 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-
-#
-# TI VLYNQ
-#
# CONFIG_STAGING is not set
#
@@ -1214,6 +1342,7 @@ CONFIG_JBD=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
@@ -1274,6 +1403,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@@ -1284,7 +1414,6 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1299,6 +1428,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1360,6 +1490,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
@@ -1393,15 +1524,25 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
@@ -1410,19 +1551,22 @@ CONFIG_FTRACE=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
+# CONFIG_EARLY_PRINTK is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10.0.1.1:255.255.255.0:zeus:eth0: root=/dev/nfs nfsroot=/nfsroot/cramfs,wsize=512,rsize=512,tcp nokgdb console=ttyUSB0,115200 memsize=252M"
# CONFIG_CMDLINE_OVERRIDE is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_RUNTIME_DEBUG is not set
+# CONFIG_SPINLOCK_TEST is not set
#
# Security options
@@ -1430,13 +1574,16 @@ CONFIG_CMDLINE="rw dhash_entries=1024 ihash_entries=1024 ip=10.0.1.3:10.0.1.1:10
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
@@ -1479,11 +1626,13 @@ CONFIG_CRYPTO_CBC=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
index bcad43a..42f02da 100644
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ b/arch/mips/include/asm/mach-powertv/asic.h
@@ -1,5 +1,9 @@
/*
- * Copyright (C) 2009 Cisco Systems, Inc.
+ * asic.h
+ *
+ * ASIC and resource specific information
+ *
+ * Copyright (C) 2009, Cisco Systems, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -20,7 +24,9 @@
#define _ASM_MACH_POWERTV_ASIC_H
#include <linux/ioport.h>
+
#include <asm/mach-powertv/asic_regs.h>
+#include <asm/mach-powertv/mdesc.h>
#define DVR_CAPABLE (1<<0)
#define PCIE_CAPABLE (1<<1)
diff --git a/arch/mips/include/asm/mach-powertv/mdesc.h b/arch/mips/include/asm/mach-powertv/mdesc.h
new file mode 100644
index 0000000..d7dda02
--- /dev/null
+++ b/arch/mips/include/asm/mach-powertv/mdesc.h
@@ -0,0 +1,51 @@
+/*
+ * mdesc.h
+ *
+ * Copyright (C) 2009 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef _ASM_MACH_POWERTV_MDESC_H
+#define _ASM_MACH_POWERTV_MDESC_H
+
+#define MEM_EXTENT_MAX 8
+
+enum Memory_Type {
+ MEM_EXTENT_OTHER,
+ MEM_EXTENT_LOW,
+ MEM_EXTENT_HIGH
+};
+
+struct mem_desc {
+ int nr_extent;
+ unsigned long mem_size;
+ struct mem_extent {
+ unsigned long phys_base;
+ unsigned long bus_base;
+ unsigned long size;
+ enum Memory_Type type;
+ } extent[MEM_EXTENT_MAX];
+};
+
+extern struct mem_desc mdesc;
+
+extern bool is_bus_low(unsigned long addr);
+
+extern int mem_desc_add(unsigned long phys_base, unsigned long bus_base,
+ unsigned long size, enum Memory_Type type);
+extern void mem_desc_init(void);
+
+#endif /* _ASM_MACH_POWERTV_MDESC_H */
diff --git a/arch/mips/powertv/Makefile b/arch/mips/powertv/Makefile
index 0a0d73c..b1fce78 100644
--- a/arch/mips/powertv/Makefile
+++ b/arch/mips/powertv/Makefile
@@ -23,6 +23,6 @@
# under Linux.
#
-obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o memory.o reset.o time.o powertv_setup.o mdesc.o asic/ pci/
EXTRA_CFLAGS += -Wall -Werror
diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c
index 8ee7788..0d35a5e 100644
--- a/arch/mips/powertv/asic/asic_devices.c
+++ b/arch/mips/powertv/asic/asic_devices.c
@@ -529,28 +529,6 @@ void __init configure_platform(void)
pr_crit("Platform: UNKNOWN PLATFORM\n");
break;
}
-
- switch (asic) {
- case ASIC_ZEUS:
- phys_to_bus_offset = 0x30000000;
- break;
- case ASIC_CALLIOPE:
- phys_to_bus_offset = 0x10000000;
- break;
- case ASIC_CRONUSLITE:
- /* Fall through */
- case ASIC_CRONUS:
- /*
- * TODO: We suppose 0x10000000 aliases into 0x20000000-
- * 0x2XXXXXXX. If 0x10000000 aliases into 0x60000000-
- * 0x6XXXXXXX, the offset should be 0x50000000, not 0x10000000.
- */
- phys_to_bus_offset = 0x10000000;
- break;
- default:
- phys_to_bus_offset = 0x00000000;
- break;
- }
}
/**
diff --git a/arch/mips/powertv/mdesc.c b/arch/mips/powertv/mdesc.c
new file mode 100644
index 0000000..8a7b972
--- /dev/null
+++ b/arch/mips/powertv/mdesc.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2010 Cisco Systems Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+
+#include <asm/prom.h>
+#include <asm/mach-powertv/mdesc.h>
+
+struct mem_desc mdesc;
+
+/*
+ * Determine whether the given bus address is in a low bank or not.
+ * Params: addr the bus address to check
+ * Returns: true if the bus address is in low, false if it isn't.
+ */
+bool is_bus_low(unsigned long addr)
+{
+ int i;
+
+ for (i = 0; i < mdesc.nr_extent; i++) {
+ if ((mdesc.extent[i].type == MEM_EXTENT_LOW) &&
+ ((addr >= mdesc.extent[i].bus_base) &&
+ (addr < (mdesc.extent[i].bus_base +
+ mdesc.extent[i].size))))
+ return true;
+ }
+
+ return false;
+}
+EXPORT_SYMBOL(is_bus_low);
+
+int __init mem_desc_add(unsigned long phys_base, unsigned long bus_base,
+ unsigned long size, enum Memory_Type type)
+{
+ if (mdesc.nr_extent >= MEM_EXTENT_MAX) {
+ pr_err("mem_desc_add: The number of extents is too big!!!\n");
+ return -1;
+ }
+
+ if (size == 0) {
+ pr_err("mem_desc_add: Wrong memory size...\n");
+ return -1;
+ }
+
+ switch (type) {
+ case MEM_EXTENT_OTHER:
+ break;
+ case MEM_EXTENT_LOW:
+ mdesc.mem_size += size;
+ break;
+ case MEM_EXTENT_HIGH:
+#ifdef CONFIG_HIGHMEM
+ mdesc.mem_size += size;
+#endif
+ break;
+ default:
+ pr_err("mem_desc_add: Wrong memory type...\n");
+ return -1;
+ }
+
+ mdesc.extent[mdesc.nr_extent].phys_base = phys_base;
+ mdesc.extent[mdesc.nr_extent].bus_base = bus_base;
+ mdesc.extent[mdesc.nr_extent].size = size;
+ mdesc.extent[mdesc.nr_extent].type = type;
+
+ mdesc.nr_extent++;
+
+ return 0;
+}
+
+void __init mem_desc_init(void)
+{
+ memset(&mdesc, 0, sizeof(mdesc));
+}
+
+#ifdef CONFIG_ARCH_HAS_DEVTREE_MEM
+typedef u32 cell_t;
+
+static int num_addr_cells;
+static int num_size_cells;
+
+static int num_extent;
+
+static inline int log10_extent(int nb)
+{
+ if (nb / 100)
+ return 3;
+ if (nb / 10)
+ return 2;
+ return 1;
+}
+
+static int __init early_init_dt_scan_extent(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ char buf[8 + log10_extent(MEM_EXTENT_MAX)];
+ unsigned long l;
+ char *memory_type;
+ enum Memory_Type type;
+ cell_t *reg, *endp;
+ unsigned long phys_base, bus_base;
+ unsigned long size;
+
+ snprintf(buf, sizeof(buf), "memory@%d", num_extent);
+
+ if (strcmp(uname, buf) != 0)
+ return 0;
+
+ memory_type = of_get_flat_dt_prop(node, "memory_type", &l);
+ if (memory_type == NULL || l <= 0)
+ return 0;
+
+ if (strcmp(memory_type, "low") == 0)
+ type = MEM_EXTENT_LOW;
+ else if (strcmp(memory_type, "high") == 0)
+ type = MEM_EXTENT_HIGH;
+ else
+ type = MEM_EXTENT_OTHER;
+
+ reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(cell_t));
+
+ pr_info("memory scan node %s, reg size %ld, data: %x %x %x\n",
+ uname, l, reg[0], reg[1], reg[2]);
+
+ while ((endp - reg) >= (num_addr_cells + num_size_cells)) {
+ phys_base = dt_mem_next_cell(1, ®);
+ bus_base = dt_mem_next_cell(1, ®);
+ size = dt_mem_next_cell(1, ®);
+ if (size == 0)
+ continue;
+ mem_desc_add(phys_base, bus_base, size, type);
+ }
+
+ return 1;
+}
+
+int __init early_init_dt_scan_memory_arch(unsigned long node,
+ const char *uname, int depth, void *data)
+{
+ u32 *prop;
+
+ prop = of_get_flat_dt_prop(node, "#address-cells", NULL);
+ num_addr_cells = (prop == NULL) ? 2 : *prop;
+
+ prop = of_get_flat_dt_prop(node, "#size-cells", NULL);
+ num_size_cells = (prop == NULL) ? 1 : *prop;
+
+ do {
+ if (!of_scan_flat_dt(early_init_dt_scan_extent, NULL))
+ break;
+ num_extent++;
+ } while (num_extent < MEM_EXTENT_MAX);
+
+ return 0;
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+}
+
+/*
+ * The memory used by device tree blob may not be in the low system memory.
+ * If it is, the area of memory should be reserved by bootmem allocator in
+ * our platform; if not, i.e. the area of memory is in the bootloader area,
+ * no reservation is needed.
+ */
+int __init reserve_mem_mach(unsigned long addr, unsigned long size)
+{
+ int i;
+
+ for (i = 0; i < mdesc.nr_extent; i++) {
+ if ((mdesc.extent[i].type == MEM_EXTENT_LOW) &&
+ ((addr >= mdesc.extent[i].phys_base) &&
+ (addr < (mdesc.extent[i].phys_base +
+ mdesc.extent[i].size)))) {
+ return reserve_bootmem(addr, size, BOOTMEM_DEFAULT);
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * The same thing happens in freeing memory, please refer to comments in
+ * arch_reserve_mem.
+ */
+void __init free_mem_mach(unsigned long addr, unsigned long size)
+{
+ int i;
+
+ for (i = 0; i < mdesc.nr_extent; i++) {
+ if ((mdesc.extent[i].type == MEM_EXTENT_LOW) &&
+ ((addr >= mdesc.extent[i].phys_base) &&
+ (addr < (mdesc.extent[i].phys_base +
+ mdesc.extent[i].size)))) {
+ free_bootmem(addr, size);
+ break;
+ }
+ }
+}
+#endif
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index f49eb3d..0e2a1c4 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -24,12 +24,16 @@
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <linux/string.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
#include <asm/bootinfo.h>
#include <asm/page.h>
#include <asm/sections.h>
+#include <asm/prom.h>
#include <asm/mips-boards/prom.h>
+#include <asm/mach-powertv/asic.h>
#include "init.h"
@@ -46,36 +50,59 @@ char __initdata cmdline[COMMAND_LINE_SIZE];
void __init prom_meminit(void)
{
- char *memsize_str;
- unsigned long memsize = 0;
- unsigned int physend;
char *ptr;
+ unsigned long memsize = 0;
+ char *memsize_str;
int low_mem;
- int high_mem;
+ int i;
- /* Check the command line first for a memsize directive */
- strcpy(cmdline, arcs_cmdline);
- ptr = strstr(cmdline, "memsize=");
- if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
- ptr = strstr(ptr, " memsize=");
+ /* Initialize the memory description */
+ mem_desc_init();
+ /* Check the command line first for a devicetree directive */
+ strncpy(cmdline, arcs_cmdline, COMMAND_LINE_SIZE - 1);
+
+#ifdef CONFIG_OF
+ ptr = strstr(cmdline, "devicetree=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " devicetree=");
if (ptr) {
- memsize = memparse(ptr + 8, &ptr);
- } else {
- /* otherwise look in the environment */
- memsize_str = prom_getenv("memsize");
-
- if (memsize_str != NULL) {
- pr_info("prom memsize = %s\n", memsize_str);
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ char buf[11];
+ unsigned long devtree;
+ memcpy(buf, ptr + 11, 10);
+ buf[10] = '\0';
+ strict_strtoul(buf, 16, &devtree);
+ early_init_devtree((void *)devtree);
+ memsize = mdesc.mem_size;
+ }
+#endif
- if (memsize == 0) {
- if (_prom_memsize != 0) {
+ /*
+ * For backward compatibility (the device tree is not
+ * supported), we still check the command line for a
+ * memsize directive.
+ */
+ if (0 == memsize) {
+ ptr = strstr(cmdline, "memsize=");
+ if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+ ptr = strstr(ptr, " memsize=");
+
+ if (ptr) {
+ memsize = memparse(ptr + 8, &ptr);
+ } else {
+ /* otherwise look in the environment */
+ memsize_str = prom_getenv("memsize");
+
+ if (memsize_str != NULL) {
+ pr_info("prom memsize = %s\n", memsize_str);
+ strict_strtol(memsize_str, 10, &memsize);
+ } else if (_prom_memsize != 0) {
memsize = _prom_memsize;
pr_info("_prom_memsize = 0x%lx\n", memsize);
- /* add in memory that the bootloader doesn't
- * report */
+ /*
+ * add in memory that the bootloader
+ * doesn't report
+ */
memsize += BOOT_MEM_SIZE;
} else {
memsize = DEFAULT_MEMSIZE;
@@ -83,86 +110,107 @@ void __init prom_meminit(void)
"defaulting to 0x%lx\n", memsize);
}
}
- }
- physend = PFN_ALIGN(&_end) - 0x80000000;
- if (memsize > LOW_MEM_MAX) {
- low_mem = LOW_MEM_MAX;
- high_mem = memsize - low_mem;
- } else {
- low_mem = memsize;
- high_mem = 0;
+ if (memsize > LOW_MEM_MAX)
+ low_mem = LOW_MEM_MAX;
+ else
+ low_mem = memsize;
+
+ switch (platform_get_family()) {
+ case FAMILY_1500:
+ case FAMILY_1500VZE:
+ case FAMILY_1500VZF:
+ /* generally used by the kernel in low. */
+ mem_desc_add(PHYS_MEM_START,
+ 0x20000000,
+ low_mem,
+ MEM_EXTENT_LOW);
+ /* reserved for reset vector. */
+ mem_desc_add(0x1fc00000,
+ 0x07fcffff,
+ MEBIBYTE(4),
+ MEM_EXTENT_OTHER);
+ break;
+ case FAMILY_4500:
+ case FAMILY_8500:
+ case FAMILY_8500RNG:
+ /* generally used by the kernel in low. */
+ mem_desc_add(PHYS_MEM_START,
+ 0x40000000,
+ low_mem,
+ MEM_EXTENT_LOW);
+ /* reserved for reset vector. */
+ mem_desc_add(0x1fc00000,
+ 0x07fcffff,
+ MEBIBYTE(4),
+ MEM_EXTENT_OTHER);
+ break;
+ case FAMILY_4600:
+ case FAMILY_4600VZA:
+ case FAMILY_8600:
+ case FAMILY_8600VZB:
+ /* generally used by the kernel in low. */
+ mem_desc_add(PHYS_MEM_START,
+ 0x20000000,
+ low_mem,
+ MEM_EXTENT_LOW);
+ /* reserved for reset vector. */
+ mem_desc_add(0x1fc00000,
+ 0x07fcffff,
+ MEBIBYTE(4),
+ MEM_EXTENT_OTHER);
+#ifdef CONFIG_HIGHMEM
+ /* generally used by the kernel in high. */
+ mem_desc_add(0x60000000,
+ 0x60000000,
+ MEBIBYTE(128),
+ MEM_EXTENT_HIGH);
+#endif
+ break;
+ default:
+ /* generally used by the kernel in low. */
+ mem_desc_add(PHYS_MEM_START,
+ 0x20000000,
+ MEBIBYTE(128),
+ MEM_EXTENT_LOW);
+ break;
+ }
}
-/*
- * TODO: We will use the hard code for memory configuration until
- * the bootloader releases their device tree to us.
- */
- /*
- * Add the memory reserved for use by the bootloader to the
- * memory map.
- */
- add_memory_region(PHYS_MEM_START, RES_BOOTLDR_MEMSIZE,
- BOOT_MEM_RESERVED);
-#ifdef CONFIG_HIGHMEM_256_128
- /*
- * Add memory in low for general use by the kernel and its friends
- * (like drivers, applications, etc).
- */
- add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
- LOW_MEM_MAX - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
- /*
- * Add the memory reserved for reset vector.
- */
- add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
- /*
- * Add the memory reserved.
- */
- add_memory_region(0x20000000, MEBIBYTE(1024 + 75), BOOT_MEM_RESERVED);
- /*
- * Add memory in high for general use by the kernel and its friends
- * (like drivers, applications, etc).
- *
- * 75MB is reserved for devices which are using the memory in high.
- */
- add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
- BOOT_MEM_RAM);
-#elif defined CONFIG_HIGHMEM_128_128
- /*
- * Add memory in low for general use by the kernel and its friends
- * (like drivers, applications, etc).
- */
- add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
- MEBIBYTE(128) - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
- /*
- * Add the memory reserved.
- */
- add_memory_region(PHYS_MEM_START + MEBIBYTE(128),
- MEBIBYTE(128 + 1024 + 75), BOOT_MEM_RESERVED);
- /*
- * Add memory in high for general use by the kernel and its friends
- * (like drivers, applications, etc).
- *
- * 75MB is reserved for devices which are using the memory in high.
- */
- add_memory_region(0x60000000 + MEBIBYTE(75), MEBIBYTE(128 - 75),
- BOOT_MEM_RAM);
+ /* Initialize the Boot Memory Map */
+ for (i = 0; i < mdesc.nr_extent; i++) {
+ unsigned long start = mdesc.extent[i].phys_base;
+ unsigned long size = mdesc.extent[i].size;
+ long type;
+ switch (mdesc.extent[i].type) {
+ case MEM_EXTENT_LOW:
+ phys_to_bus_offset = mdesc.extent[i].bus_base - start;
+ /* reserved for bootloader. */
+ add_memory_region(start,
+ BOOT_MEM_SIZE,
+ BOOT_MEM_RESERVED);
+ /*
+ * adjust the number of low memory after the
+ * space is reserved for bootloader.
+ */
+ start += BOOT_MEM_SIZE;
+ size -= BOOT_MEM_SIZE;
+ type = BOOT_MEM_RAM;
+ break;
+ case MEM_EXTENT_HIGH:
+#ifdef CONFIG_HIGHMEM
+ type = BOOT_MEM_RAM;
#else
- /* Add low memory regions for either:
- * - no-highmemory configuration case -OR-
- * - highmemory "HIGHMEM_LOWBANK_ONLY" case
- */
- /*
- * Add memory for general use by the kernel and its friends
- * (like drivers, applications, etc).
- */
- add_memory_region(PHYS_MEM_START + RES_BOOTLDR_MEMSIZE,
- low_mem - RES_BOOTLDR_MEMSIZE, BOOT_MEM_RAM);
- /*
- * Add the memory reserved for reset vector.
- */
- add_memory_region(0x1fc00000, MEBIBYTE(4), BOOT_MEM_RESERVED);
+ type = BOOT_MEM_RESERVED;
#endif
+ break;
+ case MEM_EXTENT_OTHER:
+ default:
+ type = BOOT_MEM_RESERVED;
+ break;
+ }
+ add_memory_region(start, size, type);
+ }
}
void __init prom_free_prom_memory(void)
--
1.6.0.6
