This patch is based on previous work by Sony and Himanshu Chauhan.
I have done some cleanup and implemented JProbes and KRETPROBES. The
KRETPROBES part is pretty much copied verbatim from powerpc. A
possible future enhance might be to factor out the common code.
Signed-off-by: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
Cc: Himanshu Chauhan <hschauhan@xxxxxxxxxxxxx>
---
arch/mips/Kconfig | 2 +
arch/mips/Makefile | 3 +
arch/mips/include/asm/break.h | 2 +
arch/mips/include/asm/kdebug.h | 3 +
arch/mips/include/asm/kprobes.h | 91 +++++++
arch/mips/kernel/Makefile | 1 +
arch/mips/kernel/kprobes.c | 562 +++++++++++++++++++++++++++++++++++++++
arch/mips/kernel/traps.c | 22 ++-
arch/mips/mm/fault.c | 15 +-
9 files changed, 699 insertions(+), 2 deletions(-)
create mode 100644 arch/mips/include/asm/kprobes.h
create mode 100644 arch/mips/kernel/kprobes.c
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index aaca439..36642df 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -10,6 +10,8 @@ config MIPS
select HAVE_DYNAMIC_FTRACE
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
+ select HAVE_KPROBES
+ select HAVE_KRETPROBES
select RTC_LIB if !MACH_LOONGSON
mainmenu "Linux/MIPS Kernel Configuration"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 9296cbf..f0d1960 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -259,6 +259,9 @@ endif
vmlinux.32: vmlinux
$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
+
+#obj-$(CONFIG_KPROBES) += kprobes.o
+
#
# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
# ELF files from 32-bit files by conversion.
diff --git a/arch/mips/include/asm/break.h b/arch/mips/include/asm/break.h
index 44437ed..9161e68 100644
--- a/arch/mips/include/asm/break.h
+++ b/arch/mips/include/asm/break.h
@@ -30,6 +30,8 @@
#define BRK_BUG 512 /* Used by BUG() */
#define BRK_KDB 513 /* Used in KDB_ENTER() */
#define BRK_MEMU 514 /* Used by FPU emulator */
+#define BRK_KPROBE_BP 515 /* Kprobe break */
+#define BRK_KPROBE_SSTEPBP 516 /* Kprobe single step software implementation */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* __ASM_BREAK_H */
diff --git a/arch/mips/include/asm/kdebug.h b/arch/mips/include/asm/kdebug.h
index 5bf62aa..6a9af5f 100644
--- a/arch/mips/include/asm/kdebug.h
+++ b/arch/mips/include/asm/kdebug.h
@@ -8,6 +8,9 @@ enum die_val {
DIE_FP,
DIE_TRAP,
DIE_RI,
+ DIE_PAGE_FAULT,
+ DIE_BREAK,
+ DIE_SSTEPBP
};
#endif /* _ASM_MIPS_KDEBUG_H */
diff --git a/arch/mips/include/asm/kprobes.h b/arch/mips/include/asm/kprobes.h
new file mode 100644
index 0000000..fe58e08
--- /dev/null
+++ b/arch/mips/include/asm/kprobes.h
@@ -0,0 +1,91 @@
+/*
+ * Kernel Probes (KProbes)
+ * include/asm-mips/kprobes.h
+ *
+ * Copyright 2006 Sony Corp.
+ * Copyright 2010 Cavium Networks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/kdebug.h>
+#include <asm/inst.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct kprobe;
+struct pt_regs;
+
+typedef union mips_instruction kprobe_opcode_t;
+
+#define MAX_INSN_SIZE 2
+
+#define flush_insn_slot(p) \
+do { \
+ flush_icache_range((unsigned long)p->addr, \
+ (unsigned long)p->addr + \
+ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t))); \
+} while (0)
+
+
+#define kretprobe_blacklist_size 0
+
+void arch_remove_kprobe(struct kprobe *p);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+ /* copy of the original instruction */
+ kprobe_opcode_t *insn;
+};
+
+struct prev_kprobe {
+ struct kprobe *kp;
+ unsigned long status;
+ unsigned long old_SR;
+ unsigned long saved_SR;
+ unsigned long saved_epc;
+};
+
+#define MAX_JPROBES_STACK_SIZE 128
+#define MAX_JPROBES_STACK_ADDR \
+ (((unsigned long)current_thread_info()) + THREAD_SIZE - 32 - sizeof(struct pt_regs))
+
+#define MIN_JPROBES_STACK_SIZE(ADDR) \
+ ((((ADDR) + MAX_JPROBES_STACK_SIZE) > MAX_JPROBES_STACK_ADDR) \
+ ? MAX_JPROBES_STACK_ADDR - (ADDR) \
+ : MAX_JPROBES_STACK_SIZE)
+
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+ unsigned long kprobe_status;
+ unsigned long kprobe_old_SR;
+ unsigned long kprobe_saved_SR;
+ unsigned long kprobe_saved_epc;
+ unsigned long jprobe_saved_sp;
+ struct pt_regs jprobe_saved_regs;
+ u8 jprobes_stack[MAX_JPROBES_STACK_SIZE];
+ struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data);
+
+#endif /* _ASM_KPROBES_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index ff5ec2e..06f8482 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_IRQ_TXX9) += irq_txx9.o
obj-$(CONFIG_IRQ_GT641XX) += irq-gt641xx.o
obj-$(CONFIG_IRQ_GIC) += irq-gic.o
+obj-$(CONFIG_KPROBES) += kprobes.o
obj-$(CONFIG_32BIT) += scall32-o32.o
obj-$(CONFIG_64BIT) += scall64-64.o
obj-$(CONFIG_MIPS32_COMPAT) += linux32.o ptrace32.o signal32.o
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
new file mode 100644
index 0000000..a74ccd2
--- /dev/null
+++ b/arch/mips/kernel/kprobes.c
@@ -0,0 +1,562 @@
+/*
+ * Kernel Probes (KProbes)
+ * arch/mips/kernel/kprobes.c
+ *
+ * Copyright 2006 Sony Corp.
+ * Copyright 2010 Cavium Networks
+ *
+ * Some portions copied from the powerpc version.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kprobes.h>
+#include <linux/preempt.h>
+#include <linux/kdebug.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+#include <asm/ptrace.h>
+#include <asm/break.h>
+#include <asm/inst.h>
+
+static const union mips_instruction breakpoint_insn = {
+ .b_format = {
+ .opcode = spec_op,
+ .code = BRK_KPROBE_BP,
+ .func = break_op
+ }
+};
+
+static const union mips_instruction breakpoint2_insn = {
+ .b_format = {
+ .opcode = spec_op,
+ .code = BRK_KPROBE_SSTEPBP,
+ .func = break_op
+ }
+};
+
+DEFINE_PER_CPU(struct kprobe *, current_kprobe);
+DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
+
+static int __kprobes insn_has_delayslot(union mips_instruction insn)
+{
+ switch (insn.i_format.opcode) {
+
+ /*
+ * This group contains:
+ * jr and jalr are in r_format format.
+ */
+ case spec_op:
+ switch (insn.r_format.func) {
+ case jr_op:
+ case jalr_op:
+ break;
+ default:
+ goto insn_ok;
+ }
+
+ /*
+ * This group contains:
+ * bltz_op, bgez_op, bltzl_op, bgezl_op,
+ * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
+ */
+ case bcond_op:
+
+ /*
+ * These are unconditional and in j_format.
+ */
+ case jal_op:
+ case j_op:
+
+ /*
+ * These are conditional and in i_format.
+ */
+ case beq_op:
+ case beql_op:
+ case bne_op:
+ case bnel_op:
+ case blez_op:
+ case blezl_op:
+ case bgtz_op:
+ case bgtzl_op:
+
+ /*
+ * These are the FPA/cp1 branch instructions.
+ */
+ case cop1_op:
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case lwc2_op: /* This is bbit0 on Octeon */
+ case ldc2_op: /* This is bbit032 on Octeon */
+ case swc2_op: /* This is bbit1 on Octeon */
+ case sdc2_op: /* This is bbit132 on Octeon */
+#endif
+ return 1;
+ default:
+ break;
+ }
+insn_ok:
+ return 0;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+ union mips_instruction insn;
+ union mips_instruction prev_insn;
+ int ret = 0;
+
+ prev_insn = p->addr[-1];
+ insn = p->addr[0];
+
+ if (insn_has_delayslot(insn) || insn_has_delayslot(prev_insn)) {
+ pr_notice("Kprobes for branch and jump instructions are not supported\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* insn: must be on special executable page on mips. */
+ p->ainsn.insn = get_insn_slot();
+ if (!p->ainsn.insn) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ /*
+ * In the kprobe->ainsn.insn[] array we store the original
+ * instruction at index zero and a break trap instruction at
+ * index one.
+ */
+
+ memcpy(&p->ainsn.insn[0], p->addr, sizeof(kprobe_opcode_t));
+ p->ainsn.insn[1] = breakpoint2_insn;
+ p->opcode = *p->addr;
+
+out:
+ return ret;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ *(p->addr) = breakpoint_insn;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr +
+ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));
+}
+
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
+{
+ *p->addr = p->opcode;
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr +
+ (MAX_INSN_SIZE * sizeof(kprobe_opcode_t)));
+}
+
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+ free_insn_slot(p->ainsn.insn, 0);
+}
+
+static void save_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ kcb->prev_kprobe.kp = kprobe_running();
+ kcb->prev_kprobe.status = kcb->kprobe_status;
+ kcb->prev_kprobe.old_SR = kcb->kprobe_old_SR;
+ kcb->prev_kprobe.saved_SR = kcb->kprobe_saved_SR;
+ kcb->prev_kprobe.saved_epc = kcb->kprobe_saved_epc;
+}
+
+static void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+{
+ __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ kcb->kprobe_status = kcb->prev_kprobe.status;
+ kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR;
+ kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR;
+ kcb->kprobe_saved_epc = kcb->prev_kprobe.saved_epc;
+}
+
+static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ __get_cpu_var(current_kprobe) = p;
+ kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE);
+ kcb->kprobe_saved_epc = regs->cp0_epc;
+}
+
+static void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->cp0_status &= ~ST0_IE;
+
+ /* single step inline if the instruction is a break */
+ if (p->opcode.word == breakpoint_insn.word ||
+ p->opcode.word == breakpoint2_insn.word)
+ regs->cp0_epc = (unsigned long)p->addr;
+ else
+ regs->cp0_epc = (unsigned long)&p->ainsn.insn[0];
+}
+
+static int __kprobes kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *p;
+ int ret = 0;
+ kprobe_opcode_t *addr;
+ struct kprobe_ctlblk *kcb;
+
+ addr = (kprobe_opcode_t *) regs->cp0_epc;
+
+ /*
+ * We don't want to be preempted for the entire
+ * duration of kprobe processing
+ */
+ preempt_disable();
+ kcb = get_kprobe_ctlblk();
+
+ /* Check we're not actually recursing */
+ if (kprobe_running()) {
+ p = get_kprobe(addr);
+ if (p) {
+ if (kcb->kprobe_status == KPROBE_HIT_SS &&
+ p->ainsn.insn->word == breakpoint_insn.word) {
+ regs->cp0_status &= ~ST0_IE;
+ regs->cp0_status |= kcb->kprobe_saved_SR;
+ goto no_kprobe;
+ }
+ /*
+ * We have reentered the kprobe_handler(), since
+ * another probe was hit while within the handler.
+ * We here save the original kprobes variables and
+ * just single step on the instruction of the new probe
+ * without calling any user handlers.
+ */
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p, regs, kcb);
+ kprobes_inc_nmissed_count(p);
+ prepare_singlestep(p, regs);
+ kcb->kprobe_status = KPROBE_REENTER;
+ return 1;
+ } else {
+ if (addr->word != breakpoint_insn.word) {
+ /*
+ * The breakpoint instruction was removed by
+ * another cpu right after we hit, no further
+ * handling of this interrupt is appropriate
+ */
+ ret = 1;
+ goto no_kprobe;
+ }
+ p = __get_cpu_var(current_kprobe);
+ if (p->break_handler && p->break_handler(p, regs))
+ goto ss_probe;
+ }
+ goto no_kprobe;
+ }
+
+ p = get_kprobe(addr);
+ if (!p) {
+ if (addr->word != breakpoint_insn.word) {
+ /*
+ * The breakpoint instruction was removed right
+ * after we hit it. Another cpu has removed
+ * either a probepoint or a debugger breakpoint
+ * at this address. In either case, no further
+ * handling of this interrupt is appropriate.
+ */
+ ret = 1;
+ }
+ /* Not one of ours: let kernel handle it */
+ goto no_kprobe;
+ }
+
+ set_current_kprobe(p, regs, kcb);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+
+ if (p->pre_handler && p->pre_handler(p, regs)) {
+ /* handler has already set things up, so skip ss setup */
+ return 1;
+ }
+
+ss_probe:
+ prepare_singlestep(p, regs);
+ kcb->kprobe_status = KPROBE_HIT_SS;
+ return 1;
+
+no_kprobe:
+ preempt_enable_no_resched();
+ return ret;
+
+}
+
+/*
+ * Called after single-stepping. p->addr is the address of the
+ * instruction whose first byte has been replaced by the "break 0"
+ * instruction. To avoid the SMP problems that can occur when we
+ * temporarily put back the original opcode to single-step, we
+ * single-stepped a copy of the instruction. The address of this
+ * copy is p->ainsn.insn.
+ *
+ * This function prepares to return from the post-single-step
+ * breakpoint trap.
+ */
+static void __kprobes resume_execution(struct kprobe *p,
+ struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ unsigned long orig_epc = kcb->kprobe_saved_epc;
+ regs->cp0_epc = orig_epc + 4;
+}
+
+static inline int post_kprobe_handler(struct pt_regs *regs)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (!cur)
+ return 0;
+
+ if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+ kcb->kprobe_status = KPROBE_HIT_SSDONE;
+ cur->post_handler(cur, regs, 0);
+ }
+
+ resume_execution(cur, regs, kcb);
+
+ regs->cp0_status |= kcb->kprobe_saved_SR;
+
+ /* Restore back the original saved kprobes variables and continue. */
+ if (kcb->kprobe_status == KPROBE_REENTER) {
+ restore_previous_kprobe(kcb);
+ goto out;
+ }
+ reset_current_kprobe();
+out:
+ preempt_enable_no_resched();
+
+ return 1;
+}
+
+static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+ struct kprobe *cur = kprobe_running();
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+ return 1;
+
+ if (kcb->kprobe_status & KPROBE_HIT_SS) {
+ resume_execution(cur, regs, kcb);
+ regs->cp0_status |= kcb->kprobe_old_SR;
+
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ }
+ return 0;
+}
+
+/*
+ * Wrapper routine for handling exceptions.
+ */
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+
+ struct die_args *args = (struct die_args *)data;
+ int ret = NOTIFY_DONE;
+
+ switch (val) {
+ case DIE_BREAK:
+ if (kprobe_handler(args->regs))
+ ret = NOTIFY_STOP;
+ break;
+ case DIE_SSTEPBP:
+ if (post_kprobe_handler(args->regs))
+ ret = NOTIFY_STOP;
+ break;
+
+ case DIE_PAGE_FAULT:
+ /* kprobe_running() needs smp_processor_id() */
+ preempt_disable();
+
+ if (kprobe_running()
+ && kprobe_fault_handler(args->regs, args->trapnr))
+ ret = NOTIFY_STOP;
+ preempt_enable();
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct jprobe *jp = container_of(p, struct jprobe, kp);
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ kcb->jprobe_saved_regs = *regs;
+ kcb->jprobe_saved_sp = regs->regs[29];
+
+ memcpy(kcb->jprobes_stack, (void *)kcb->jprobe_saved_sp,
+ MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+
+ regs->cp0_epc = (unsigned long)(jp->entry);
+
+ return 1;
+}
+
+/* Defined in the inline asm below. */
+void jprobe_return_end(void);
+
+void __kprobes jprobe_return(void)
+{
+ /* Assembler quirk necessitates this '0,code' business. */
+ asm volatile(
+ "break 0,%0\n\t"
+ ".globl jprobe_return_end\n"
+ "jprobe_return_end:\n"
+ : : "n" (BRK_KPROBE_BP) : "memory");
+}
+
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+
+ if (regs->cp0_epc >= (unsigned long)jprobe_return &&
+ regs->cp0_epc <= (unsigned long)jprobe_return_end) {
+ *regs = kcb->jprobe_saved_regs;
+ memcpy((void *)kcb->jprobe_saved_sp, kcb->jprobes_stack,
+ MIN_JPROBES_STACK_SIZE(kcb->jprobe_saved_sp));
+ preempt_enable_no_resched();
+
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * Function return probe trampoline:
+ * - init_kprobes() establishes a probepoint here
+ * - When the probed function returns, this probe causes the
+ * handlers to fire
+ */
+static void __used kretprobe_trampoline_holder(void)
+{
+ asm volatile(
+ ".set push\n\t"
+ /* Keep the assembler from reordering and placing JR here. */
+ ".set noreorder\n\t"
+ "nop\n\t"
+ ".global kretprobe_trampoline\n"
+ "kretprobe_trampoline:\n\t"
+ "nop\n\t"
+ ".set pop"
+ : : : "memory");
+}
+
+void kretprobe_trampoline(void);
+
+void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
+ struct pt_regs *regs)
+{
+ ri->ret_addr = (kprobe_opcode_t *) regs->regs[31];
+
+ /* Replace the return addr with trampoline addr */
+ regs->regs[31] = (unsigned long)kretprobe_trampoline;
+}
+
+/*
+ * Called when the probe at kretprobe trampoline is hit
+ */
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+ struct pt_regs *regs)
+{
+ struct kretprobe_instance *ri = NULL;
+ struct hlist_head *head, empty_rp;
+ struct hlist_node *node, *tmp;
+ unsigned long flags, orig_ret_address = 0;
+ unsigned long trampoline_address = (unsigned long)kretprobe_trampoline;
+
+ INIT_HLIST_HEAD(&empty_rp);
+ kretprobe_hash_lock(current, &head, &flags);
+
+ /*
+ * It is possible to have multiple instances associated with a given
+ * task either because an multiple functions in the call path
+ * have a return probe installed on them, and/or more than one return
+ * return probe was registered for a target function.
+ *
+ * We can handle this because:
+ * - instances are always inserted at the head of the list
+ * - when multiple return probes are registered for the same
+ * function, the first instance's ret_addr will point to the
+ * real return address, and all the rest will point to
+ * kretprobe_trampoline
+ */
+ hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+ if (ri->task != current)
+ /* another task is sharing our hash bucket */
+ continue;
+
+ if (ri->rp && ri->rp->handler)
+ ri->rp->handler(ri, regs);
+
+ orig_ret_address = (unsigned long)ri->ret_addr;
+ recycle_rp_inst(ri, &empty_rp);
+
+ if (orig_ret_address != trampoline_address)
+ /*
+ * This is the real return address. Any other
+ * instances associated with this task are for
+ * other calls deeper on the call stack
+ */
+ break;
+ }
+
+ kretprobe_assert(ri, orig_ret_address, trampoline_address);
+ instruction_pointer(regs) = orig_ret_address;
+
+ reset_current_kprobe();
+ kretprobe_hash_unlock(current, &flags);
+ preempt_enable_no_resched();
+
+ hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
+ hlist_del(&ri->hlist);
+ kfree(ri);
+ }
+ /*
+ * By returning a non-zero value, we are telling
+ * kprobe_handler() that we don't want the post_handler
+ * to run (and have re-enabled preemption)
+ */
+ return 1;
+}
+
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+ if (p->addr == (kprobe_opcode_t *)kretprobe_trampoline)
+ return 1;
+
+ return 0;
+}
+
+static struct kprobe trampoline_p = {
+ .addr = (kprobe_opcode_t *)kretprobe_trampoline,
+ .pre_handler = trampoline_probe_handler
+};
+
+int __init arch_init_kprobes(void)
+{
+ return register_kprobe(&trampoline_p);
+}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 1515b67..4c6079f 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -25,6 +25,7 @@
#include <linux/ptrace.h>
#include <linux/kgdb.h>
#include <linux/kdebug.h>
+#include <linux/kprobes.h>
#include <linux/notifier.h>
#include <linux/kdb.h>
@@ -334,7 +335,7 @@ void show_regs(struct pt_regs *regs)
__show_regs((struct pt_regs *)regs);
}
-void show_registers(const struct pt_regs *regs)
+void show_registers(struct pt_regs *regs)
{
const int field = 2 * sizeof(unsigned long);
@@ -783,6 +784,25 @@ asmlinkage void do_bp(struct pt_regs *regs)
if (bcode >= (1 << 10))
bcode >>= 10;
+ /*
+ * notify the kprobe handlers, if instruction is likely to
+ * pertain to them.
+ */
+ switch (bcode) {
+ case BRK_KPROBE_BP:
+ if (notify_die(DIE_BREAK, "debug", regs, bcode, 0, 0) == NOTIFY_STOP)
+ return;
+ else
+ break;
+ case BRK_KPROBE_SSTEPBP:
+ if (notify_die(DIE_SSTEPBP, "single_step", regs, bcode, 0, 0) == NOTIFY_STOP)
+ return;
+ else
+ break;
+ default:
+ break;
+ }
+
do_trap_or_bp(regs, bcode, "Break");
return;
diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c
index b4aac42..783ad00 100644
--- a/arch/mips/mm/fault.c
+++ b/arch/mips/mm/fault.c
@@ -17,6 +17,7 @@
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/module.h>
+#include <linux/kprobes.h>
#include <asm/branch.h>
#include <asm/mmu_context.h>
@@ -24,13 +25,14 @@
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/highmem.h> /* For VMALLOC_END */
+#include <linux/kdebug.h>
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*/
-asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, unsigned long write,
unsigned long address)
{
struct vm_area_struct * vma = NULL;
@@ -46,6 +48,17 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long write,
field, regs->cp0_epc);
#endif
+#ifdef CONFIG_KPROBES
+ /*
+ * This is to notify the fault handler of the kprobes. The
+ * exception code is redundant as it is also carried in REGS,
+ * but we pass it anyhow.
+ */
+ if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1,
+ (regs->cp0_cause >> 2) & 0x1f, SIGSEGV) == NOTIFY_STOP)
+ return;
+#endif
+
info.si_code = SEGV_MAPERR;
/*
--
1.7.1.1
