Linux USB Users

• Thread Index

• [PATCH 3/6 v3] arm: omap: usb: register hwmods of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/6 v3] arm: omap: usb: device name change for the clk names of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 6/6 v3] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 5/6 v3] arm: omap: usb: Runtime PM support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/6 v3] arm: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [RFC/PATCH 1/3] usb: Add SuperSpeed support to g_zero gadget
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3] usb: gadget: add SS descriptors to Ethernet gadget
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/3 v2] usb: m66592-udc: add support for TEST_MODE
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/6 v2] usb: r8a66597-udc: Make BUSWAIT configurable through platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 3/6 v2] usb: r8a66597-udc: fix cannot connect after rmmod gadget driver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/6 v2] usb: r8a66597-udc: add support for TEST_MODE
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: update email address in r8a66597-udc and m66592-udc
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: musb: restore INDEX register in resume path
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] usb: musb: restore INDEX register in resume path
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: musb: restore INDEX register in resume path
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] hso: fix a use after free condition
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: EHCI: go back to using the system clock for QH unlinks
  • From: Matej Kenda <matejken@xxxxxxxxx>
• Re: [PATCH] usb: ehci: Fix test mode sequence
  • From: Boris Todorov <boris.st.todorov@xxxxxxxxx>
• USB device keeps sending zero-length ISO transfers
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: resetep problem though hub
  • From: Graeme Gill <graeme2@xxxxxxxxxxxxx>
• ath9k_htc failed to resume properly in 3.0.0-rc6-wl
  • From: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
• [PATCH 1/3 v2] usb: m66592-udc: add support for TEST_MODE
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 5/6 v2] usb: r8a66597-udc: Make BUSWAIT configurable through platform data
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 3/6 v2] usb: r8a66597-udc: fix cannot connect after rmmod gadget driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 2/6 v2] usb: r8a66597-udc: add support for TEST_MODE
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: usbmon cannot capture log with full speed device?
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• [RFC 9/9] xhci: Implement HS/FS/LS bandwidth checking.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 8/9] xhci: Track interval bandwidth tables per port/TT.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 7/9] xhci: Store endpoint bandwidth information.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 6/9] xhci: Store information about roothubs and TTs.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 5/9] xhci: Store the "real" root port number.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 4/9] xhci: Refactor endpoint limit checking.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 3/9] xhci: Rename virt_dev->port to fake_port.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 2/9] xhci: If no endpoints changed, don't issue BW command.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 1/9] Trivial: xhci: Fix copy-paste error.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [RFC 0/9] xhci: Intel SW bandwidth checking.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: m66592-udc: add support for TEST_MODE
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Greg KH <greg@xxxxxxxxx>
• [GIT PATCH] another USB fix for 3.0
  • From: Greg KH <gregkh@xxxxxxx>
• solved was Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v3] USB: mon: Allow to use usbmon without debugfs
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: EHCI-OMAP failure following unlink
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: your mail
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/6 v2] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Florian Mickler <florian@xxxxxxxxxxx>
• Re: usbmon cannot capture log with full speed device?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [no subject]
  • From: coredump <jose.junior@xxxxxxxxx>
• Re: [PATCH v2] usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: ehci: Fix test mode sequence
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Σχετ: Getting spammed by "hub 2-1:1.0: unable to enumerate USB device on port 6"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] usb: m66592-udc: add support for TEST_MODE
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Greg KH <greg@xxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• usbmon cannot capture log with full speed device?
  • From: yingchun li <sword.l.dragon@xxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: Allocating buffers for USB transfers (again)
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• Allocating buffers for USB transfers (again)
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH v2] usb: renesas_usbhs: compile/config are rescued
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 6/6] usb: host: xhci: decouple xhci.c from xhci-pci.c
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 5/6] usb: host: xhci: pass quirks via driver_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 4/6] usb: host: xhci: use DEFINE_PCI_DEVICE_TABLE
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 3/6] usb: host: xhci: no need to pass hc_driver as driver_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 2/6] usb: host: xhci: give xhci a platform_device
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 1/6] usb: host: introduce USB_ARCH_HAS_XHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• [RFC/PATCH 0/6] Decouple PCI from XHCI
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/6 v2] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2] usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [PATCH 5/6] usb: r8a66597-udc: Make BUSWAIT configurable through platform data
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Re: [PATCH 3/6] usb: r8a66597-udc: fix cannot connect after rmmod gadget driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH v2] usb: renesas_usbhs: compile/config are rescued
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• Re: [PATCH] USB: additional regression fix for device removal
  • From: Éric Piel <E.A.B.Piel@xxxxxxxxxx>
• RE: Question about xHCI USB2 LPM
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/6] usb: r8a66597-udc: Make BUSWAIT configurable through platform data
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/7] staging: usbip: userspace: usbipd: major cleanup of daemon
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH 6/7] staging: usbip: userspace: README: update example output
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] usb: r8a66597-udc: fix cannot connect after rmmod gadget driver
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• 3.0-rc6: USB khubd deadlock when hub is powered down
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [PATCH 3/7] staging: usbip: userspace: fix header installation bug
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH 5/7] staging: usbip: userspace: usbip: modify `list' help message
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH 7/7] staging: usbip: userspace: usbip-utils 1.1.1
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/7] staging: usbip: rebased userspace patches
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH 4/7] staging: usbip: userspace: usbip_list.c: modify exportable device output
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH 2/7] staging: usbip: userspace: add new prefix for usbip network code
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: [PATCH] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• [PATCH] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH v2] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: fixup comment-out
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] usb: renesas_usbhs: compile/config are rescued
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Matt Chen <machen@xxxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• [PATCH] usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 2/2] Staging: Remove ENE UB6250 MS card codes from keucr
  • From: "Cho, Yu-Chen" <acho@xxxxxxxxxx>
• [PATCH 1/2] Staging: Merge ENE UB6250 MS card codes from keucr to drivers/usb/storage/ene_ub6250.c
  • From: "Cho, Yu-Chen" <acho@xxxxxxxxxx>
• [PATCH] usb: update email address in r8a66597-udc and m66592-udc
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH] usb: update email address in ohci-sh and r8a66597-hcd
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 3/3] usb: m66592-udc: add pullup function
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 2/3] usb: m66592-udc: add function for external controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 1/3] usb: m66592-udc: add support for TEST_MODE
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 6/6] usb: r8a66597-udc: add pullup function
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 5/6] usb: r8a66597-udc: Make BUSWAIT configurable through platform data
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 4/6] usb: r8a66597-udc: add function for external controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 3/6] usb: r8a66597-udc: fix cannot connect after rmmod gadget driver
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 2/6] usb: r8a66597-udc: add support for TEST_MODE
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• [PATCH 1/6] usb: r8a66597-hcd: add function for external controller
  • From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
• Σχετ: Getting spammed by "hub 2-1:1.0: unable to enumerate USB device on port 6"
  • From: Francis Turkey <francisturkey@xxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: EHCI-OMAP failure following unlink
  • From: Ed Endejan <Edward.Endejan@xxxxxxxxxxxxxx>
• [PATCH] USB: additional regression fix for device removal
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Regression 3.0-rc6+ : khubd blocked (usbnet_cdc_unbind)
  • From: Greg KH <gregkh@xxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] EHCI: only power off port if over-current is active
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] EHCI: only power off port if over-current is active
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: EHCI-OMAP failure following unlink
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] USB: mon: Allow to use usbmon without debugfs
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Regression 3.0-rc6+ : khubd blocked (usbnet_cdc_unbind)
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: Question about xHCI USB2 LPM
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: EHCI-OMAP failure following unlink
  • From: Ed Endejan <Edward.Endejan@xxxxxxxxxxxxxx>
• Re: Regression 3.0-rc6+ : khubd blocked (usbnet_cdc_unbind)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] EHCI: only power off port if over-current is active
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Weird USB over-current messages in recent kernels...
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Weird USB over-current messages in recent kernels...
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] EHCI: only power off port if over-current is active
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: USB Linux Host is not suspending, When a Mass storage device is connected
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Question about xHCI USB2 LPM
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH v2] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• USB Linux Host is not suspending, When a Mass storage device is connected
  • From: Chiranjevi <cvelempa@xxxxxxxxxxxxxx>
• Re: 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• [smatch stuff] USB net2272: potential NULL dereference
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• [PATCH 1/1] staging: usbip: userspace: usbipd.c: fix userspace build error
  • From: David Chang <dchang@xxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
• Re: [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH 2/2] USB: fix regression occurring during device removal
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [PATCH 1/2] USB: fsl_udc_core: fix build breakage when building for ARM arch
  • From: Greg Kroah-Hartman <gregkh@xxxxxxx>
• [GIT PATCH] USB fixes for 3.0
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] USB: mon: Allow to use usbmon without debugfs
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [PATCH 00/22] staging: usbip: misc. userspace changes
  • From: Greg KH <greg@xxxxxxxxx>
• Re: where can I find the pl2303 vendor reference?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: where can I find the pl2303 vendor reference?
  • From: Xiaofan Chen <xiaofanc@xxxxxxxxx>
• where can I find the pl2303 vendor reference?
  • From: c-aries <babyaries2@xxxxxxxxx>
• Weird USB over-current messages in recent kernels...
  • From: Valdis.Kletnieks@xxxxxx
• 2.6.39.2: usb kernel panic/oops: schedule+ehci_irq+0x266/0x830
  • From: Justin Piszcz <jpiszcz@xxxxxxxxxxxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH] EHCI: only power off port if over-current is active
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] staging/westbridge: convert cyasgadget to new udc core
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] staging/westbridge: convert cyasgadget to new udc core
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] staging/westbridge: convert cyasgadget to new udc core
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] USB: EHCI: go back to using the system clock for QH unlinks
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 05/15] ARM: pxa/lubbock: switch to using lubbock_usb_xceiv transceiver
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v3 2/2] ehci: add pci quirk for Ordissimo and RM Slate 100 too
  • From: Anisse Astier <anisse@xxxxxxxxx>
• [PATCH v3 1/2] ehci: refactor pci quirk to use standard dmi_check_system method
  • From: Anisse Astier <anisse@xxxxxxxxx>
• [PATCH v3 0/2] (was: Re: [PATCH] ehci: pci quirk disabled for Ordissimo and RM Slate 100 too)
  • From: Anisse Astier <anisse@xxxxxxxxx>
• Re: [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: read / write / close sync for device files
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 03/15] ARM: pxa/stargate2: drop udc_is_connected
  • From: Jonathan Cameron <jic23@xxxxxxxxx>
• Re: [PATCH] USB: Gadget: Webcam: Return correct result of bind
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 04/15] ARM: pxa25x_udc: separate lubbock handling to lubbock-usb transceiver
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 07/15] pxa25x_udc: drop support for udc_command
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/15] Big pxa2[57]x_udc cleanup
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: read / write / close sync for device files
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH] ehci: pci quirk disabled for Ordissimo and RM Slate 100 too
  • From: Greg KH <gregkh@xxxxxxx>
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 14/15] gpio-pullup: support disabling D+ pullup on suspend
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 13/15] mioa701: move gpio-pullup functionality to gpio-vbus
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 12/15] gpio-vbus: support disabling D+ pullup on suspend
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 11/15] h5000: convert to use gpio-pullup
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 10/15] poodle: convert to use gpio-pullup
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 09/15] corgi: convert to use gpio-pullup
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 08/15] otg: add gpio_pullup OTG transceiver for devices with no VBUS sensing
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 07/15] pxa25x_udc: drop support for udc_command
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 06/15] pxa: drop handling of udc_is_connected
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 05/15] ARM: pxa/lubbock: switch to using lubbock_usb_xceiv transceiver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 04/15] ARM: pxa25x_udc: separate lubbock handling to lubbock-usb transceiver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 03/15] ARM: pxa/stargate2: drop udc_is_connected
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 02/15] ARM: pxa/mioa701: drop udc_is_connected
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 01/15] ARM: pxa/balloon3: drop udc_is_connected
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH 00/15] Big pxa2[57]x_udc cleanup
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH] ehci: pci quirk disabled for Ordissimo and RM Slate 100 too
  • From: Anisse Astier <anisse@xxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/3] at91-ohci: support overcurrent notification
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• [PATCH] USB: mon: Allow to use usbmon without debugfs
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH] ehci: pci quirk disabled for Ordissimo and RM Slate 100 too
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] ehci: pci quirk disabled for Ordissimo and RM Slate 100 too
  • From: Anisse Astier <anisse@xxxxxxxxx>
• Re: [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
  • From: Eric Miao <eric.y.miao@xxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: read / write / close sync for device files
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: resetep problem though hub
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB Disconnects / resets after commit b963801164618e25fbdc0cd452ce49c3628b46c8
  • From: Matej Kenda <matejken@xxxxxxxxx>
• Re: resetep problem though hub
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6 V2] arm: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• Re: [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Pete Zaitcev <zaitcev@xxxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 3/4] usb: gadget: net2272: fix compile warnings
  • From: Greg KH <greg@xxxxxxxxx>
• Re: read / write / close sync for device files
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] EHCI : introduce a common ehci_setup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] USB: mon: Depend on DEBUG_FS
  • From: Tobias Klauser <tklauser@xxxxxxxxxx>
• read / write / close sync for device files
  • From: Amit Nagal <helloin.amit@xxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Heiko Carstens <heiko.carstens@xxxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: [PATCH 3/4] usb: gadget: net2272: fix compile warnings
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: gadget: fix code so the warnings disappear
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: fix code so the warnings disappear
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: [PATCH 4/4] usb: gadget: storage: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 4/4] usb: gadget: storage: fix compile warnings
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• [PATCH 4/4] usb: gadget: storage: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/4] usb: gadget: net2272: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/4] usb: gadget: langwell_udc: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/4] usb: gadget: fusb300_udc: drop dead code
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/4] USB: gadget: compile warning fixes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: gadget: fix code so the warnings disappear
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Matt Chen <machen@xxxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• RE: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: resetep problem though hub
  • From: Graeme Gill <graeme2@xxxxxxxxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: David Chang <dchang@xxxxxxxxxx>
• [PATCH 3/3] usb: renesas_usbhs: inaccessible pipe is not an error
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 2/3] usb: renesas_usbhs: support multi driver
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/3] usb: renesas_usbhs: care buff alignment when dma handler
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 0/3 v2] usb: renesas_usbhs: tidyup patches
  • From: kuninori.morimoto.gx@xxxxxxxxxxx
• [PATCH V3 2/2] mioa701: move gpio-pullup functionality to gpio-vbus
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V3 1/2] gpio-vbus: support disabling D+ pullup on suspend
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V3 0/2] Suspend for gpio-vbus
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH V2 0/2] Suspend for gpio-vbus support
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 1/2] EHCI : introduce a common ehci_setup
  • From: matthieu castet <castet.matthieu@xxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Stefan Richter <stefanr@xxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH v4 2/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH v4 0/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH v4 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [RFC/PATCH 3/3] usb:gadget: SuperSpeed function power management testing support
  • From: Amit Blay <ablay@xxxxxxxxxxxxxx>
• [RFC/PATCH 2/3] usb:gadget: Add SuperSpeed function power management
  • From: Amit Blay <ablay@xxxxxxxxxxxxxx>
• [RFC/PATCH 1/3] usb: Add SuperSpeed support to g_zero gadget
  • From: Amit Blay <ablay@xxxxxxxxxxxxxx>
• [PATCH 0/3] usb:gadget: Add SuperSpeed Function Power Management
  • From: Amit Blay <ablay@xxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Maciej Rutecki <maciej.rutecki@xxxxxxxxx>
• Re: [PATCH V2 0/2] Suspend for gpio-vbus support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Dan Williams <dan.j.williams@xxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] EHCI : introduce a common ehci_setup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] ehci-msm : use ehci_setup
  • From: Matthieu CASTET <castet.matthieu@xxxxxxx>
• [PATCH 1/2] EHCI : introduce a common ehci_setup
  • From: Matthieu CASTET <castet.matthieu@xxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Peter Rasmussen <peterleifrasmussen@xxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• [PATCH V2 2/2] mioa701: move gpio-pullup functionality to gpio-vbus
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 1/2] gpio-vbus: support disabling D+ pullup on suspend
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH V2 0/2] Suspend for gpio-vbus support
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH v3 2/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3 v2] usb: renesas_usbhs: tidyup patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [GIT PULL] USB patches
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v3 2/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: fix regression occurring during device removal
  • From: Andi Kleen <andi@xxxxxxxxxxxxxx>
• [PATCH] USB: fix regression occurring during device removal
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Linux 3.0 oopses when pulling a USB CDROM
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/6 v2] arm: omap: usb: ehci and ohci hwmod structures for omap4
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 0/6 V2] arm: omap: usb: Runtime PM support for EHCI and OHCI drivers
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 3/6 v2] arm: omap: usb: register hwmods of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 5/6 v2] arm: omap: usb: Runtime PM support
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 4/6 v2] arm: omap: usb: device name change for the clk names of usbhs
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 6/6 v2] arm: omap: usb: global Suspend and resume support of ehci and ohci
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH 2/6 v2] arm: omap: usb: ehci and ohci hwmod structures for omap3
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Regression 3.0-rc5+ : khubd blocked
  • From: Greg KH <gregkh@xxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH v3 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH v3 2/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH v3 0/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [Libmtp-discuss] MTP serviceInfo dataset
  • From: Marcus Meissner <marcus@xxxxxxxxxxxxxx>
• Re: MTP serviceInfo dataset
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: Dwight Schauer <dschauer@xxxxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: Walking the USB tree?
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Walking the USB tree?
  • From: Greg KH <greg@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Walking the USB tree?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Peter Rasmussen <peterleifrasmussen@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Greg KH <gregkh@xxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: Dwight Schauer <dschauer@xxxxxx>
• RE: [PATCH/RFC 5/5] usb: Add support for streams alloc/dealloc to devio.c
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH/RFC 5/5] usb: Add support for streams alloc/dealloc to devio.c
  • From: William Gulland <wgulland@xxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Felix Paliuc <fpaliuc@xxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] USB: EHCI: Allow users to override 80% max periodic bandwidth
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 5/5] usb: Add support for streams alloc/dealloc to devio.c
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Digitemp problem with kernel 2.6.39
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• EHCI-OMAP failure following unlink
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• xHCI: Limiting host bInterval for super speed endpoints for Texas Instruments host controllers
  • From: "Schauer, Dwight" <dschauer@xxxxxx>
• Re: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [Bugme-new] [Bug 38462] New: USB<->serial (pl2303) 100% CPU usage loop in 2.6.39.2 (w/ bisection)
  • From: Libor Pechacek <lpechacek@xxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Matt Chen <machen@xxxxxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: Németh Márton <nm127@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH v2] usb: gadget: Compilation warning fix
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: Greg KH <greg@xxxxxxxxx>
• RE: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• [PATCH] usb: gadget: Compilation warning fix
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH, RFC] USBIP protocol documentation
  • From: matt mooney <mfm@xxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Peter Rasmussen <peterleifrasmussen@xxxxxxxxx>
• Re: [Bugme-new] [Bug 38462] New: USB<->serial (pl2303) 100% CPU usage loop in 2.6.39.2 (w/ bisection)
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• 3.0rc3-rc5: usb stops working after resume from suspend to ram
  • From: Arkadiusz Miskiewicz <a.miskiewicz@xxxxxxxxx>
• Re: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: Partha Basak <p-basak2@xxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] USB: EHCI: Move sysfs related bits into ehci-sysfs.c
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] mfd: global Suspend and resume support of ehci and ohci
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH 05/41] usb: gadget: use config_ep_by_speed() instead of ep_choose()
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB with SDHC card not recognized in 2.6.39 and 3.0rc4
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 05/41] usb: gadget: use config_ep_by_speed() instead of ep_choose()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 30/32] usb: gadget: udc-core: wire up sysfs files
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 32/32] usb: musb: no need to access platform_device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 31/32] usb: musb: omap: always create musb device
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 09/32] usb: gadget: s3c2410_udc: use platform ids instead
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 29/32] usb: gadget: dummy_hcd: convert to new-style udc-probe
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 28/32] usb: musb: convert musb to new style bind
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 27/32] usb: gadget: udc-core: add "new-style" registration interface
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 26/32] usb: gadget: dummy_hcd: move selection of speed into ->pullup()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 25/32] usb: gadget: dummy_hcd: init is_otg in init_dummy_udc_hw()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 24/32] usb: gadget: dummy_hcd: move ep initialisation HW setup
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 22/32] usb: gadget: allow multiple gadgets to be built
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 23/32] usb: gadget: defer setting maxpacket till ->setup()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 21/32] usb: musb: choose correct fifo_mode
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 20/32] usb: musb: drop a gigantic amount of ifdeferry
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 19/32] usb: musb: be careful when using different fifo_modes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 18/32] usb: gadget: dummy_hcd: move common bits of suspend/resume into one function
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 17/32] usb: gadget: remove net2280_set_fifo_mode()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 15/32] usb: gadget: dummy_hcd: use gadget_to_dummy_hcd() where possible
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 16/32] usb: gadget: dummy_hcd: use less checks for USB_SPEED_SUPER
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 13/32] usb: gadget: dummy_hcd: use dummy_pullup() instead of open coding
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 12/32] usb: gadget: add missing #include's
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 11/32] usb: gadget: chips: remove ifdef trickery
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 10/32] usb: gadget: ci13xx_udc: fix usb_ep_enable() call
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/32] usb: musb: update musb_platform_ops docs to match code
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/32] usb: gadget: add platform module alias where it is missing
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/32] usb: gadget: dummy_hcd: add SuperSpeed support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/32] usb: gadget: net2272: cleanup pci_register_driver() error path
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/32] usb: gadget: dummy_hcd: add 'is_high_speed' parameter
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/32] usb: gadget: dummy_hcd: use the shared_hcd infrastructure
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/32] usb: gadget: add SuperSpeed support to the Gadget Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/32] usb: gadget: add max_speed to usb_composite_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [GIT PULL] USB patches
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: gadget: add SuperSpeed support to the Gadget Framework
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v2 1/2] usb: gadget: add max_speed to usb_composite_driver
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: gadget: add SuperSpeed support to the Gadget Framework
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Adding SS support to the Gadget FW - fix
  • From: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
• Re: option to compile more than one usb peripheral controller as gadget
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• Re: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: Jassi Brar <jassisinghbrar@xxxxxxxxx>
• Re: option to compile more than one usb peripheral controller as gadget
  • From: Pratyush Anand <pratyush.linux@xxxxxxxxx>
• Re: option to compile more than one usb peripheral controller as gadget
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• option to compile more than one usb peripheral controller as gadget
  • From: Pratyush Anand <pratyush.linux@xxxxxxxxx>
• RE: [PATCH 06/41] usb: gadget: add max_speed to usb_composite_driver
  • From: "Tanya Brokhman" <tlinder@xxxxxxxxxxxxxx>
• Re: Question about patch musb: use dma mode 1 for TX if transfer size equals maxpacket
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• [patch] usb: remove unneeded NULL check in usb_disconnect()
  • From: Dan Carpenter <error27@xxxxxxxxx>
• Re: Question about patch musb: use dma mode 1 for TX if transfer size equals maxpacket
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [GIT PULL] USB Gadget + MUSB for-next
  • From: Felipe Balbi <balbi@xxxxxx>
• Question about patch musb: use dma mode 1 for TX if transfer size equals maxpacket
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH 16/41] usb: gadget: ci13xx_udc: fix usb_ep_enable() call
  • From: Felipe Balbi <balbi@xxxxxx>