Hi, In 3.0.0-rc6-wl kernel, ath9k_htc device failed to resume when we do rtcwake. But the same driver and firmware seems to be working properly with older (2.6.38) kernel. In dmesg was logged with following error. ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC hub 1-0:1.0: port 1: status 0100 change 0001 ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 6: status 0501 change 0001 hub 1-0:1.0: port 1 status 0000.0100 after resume, -19 usb 1-6: finish reset-resume usb 1-1: can't resume, status -19 hub 1-0:1.0: logical disconnect on port 1 Please help me to find out where things went wrong. (complete kernel.log attached) -- Rajkumar
Jul 8 11:36:19 localhost kernel: [ 0.000000] Initializing cgroup subsys cpuset Jul 8 11:36:19 localhost kernel: [ 0.000000] Initializing cgroup subsys cpu Jul 8 11:36:19 localhost kernel: [ 0.000000] Linux version 3.0.0-rc6-wl+ (vmraj@vmraj-lnx) (gcc version 4.6.1 (GCC) ) #3 SMP PREEMPT Fri Jul 8 11:30:08 IST 2011 Jul 8 11:36:19 localhost kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/47228efe-de3e-48b8-922d-cdc15612fdc3 ro vga=773 Jul 8 11:36:19 localhost kernel: [ 0.000000] Disabled fast string operations Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-provided physical RAM map: Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b96a1000 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b96a1000 - 00000000b96a7000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b96a7000 - 00000000b97b7000 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b97b7000 - 00000000b980f000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b980f000 - 00000000b98c7000 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98c7000 - 00000000b98d2000 (ACPI NVS) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98d2000 - 00000000b98d5000 (ACPI data) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98d5000 - 00000000b98d9000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98d9000 - 00000000b98dd000 (ACPI NVS) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98dd000 - 00000000b98e0000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b98e0000 - 00000000b9907000 (ACPI NVS) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9907000 - 00000000b9908000 (ACPI data) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9908000 - 00000000b9b0f000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9b0f000 - 00000000b9b9f000 (ACPI NVS) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9b9f000 - 00000000b9bff000 (ACPI data) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9bff000 - 00000000b9c00000 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000b9c00000 - 00000000bc000000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] NX (Execute Disable) protection: active Jul 8 11:36:19 localhost kernel: [ 0.000000] DMI present. Jul 8 11:36:19 localhost kernel: [ 0.000000] DMI: LENOVO 64756D6/64756D6, BIOS 7UET81WW (3.11 ) 11/26/2009 Jul 8 11:36:19 localhost kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 8 11:36:19 localhost kernel: [ 0.000000] No AGP bridge found Jul 8 11:36:19 localhost kernel: [ 0.000000] last_pfn = 0xb9c00 max_arch_pfn = 0x400000000 Jul 8 11:36:19 localhost kernel: [ 0.000000] MTRR default type: uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] MTRR fixed ranges enabled: Jul 8 11:36:19 localhost kernel: [ 0.000000] 00000-9FFFF write-back Jul 8 11:36:19 localhost kernel: [ 0.000000] A0000-BFFFF uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] C0000-D3FFF write-protect Jul 8 11:36:19 localhost kernel: [ 0.000000] D4000-DBFFF uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] DC000-FFFFF write-protect Jul 8 11:36:19 localhost kernel: [ 0.000000] MTRR variable ranges enabled: Jul 8 11:36:19 localhost kernel: [ 0.000000] 0 base 0BD000000 mask FFF000000 uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] 2 base 000000000 mask F80000000 write-back Jul 8 11:36:19 localhost kernel: [ 0.000000] 3 base 080000000 mask FC0000000 write-back Jul 8 11:36:19 localhost kernel: [ 0.000000] 4 base 0B9E00000 mask FFFE00000 uncachable Jul 8 11:36:19 localhost kernel: [ 0.000000] 5 disabled Jul 8 11:36:19 localhost kernel: [ 0.000000] 6 disabled Jul 8 11:36:19 localhost kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Jul 8 11:36:19 localhost kernel: [ 0.000000] e820 update range: 00000000b9e00000 - 00000000ba000000 (usable) ==> (reserved) Jul 8 11:36:19 localhost kernel: [ 0.000000] found SMP MP-table at [ffff8800000f6480] f6480 Jul 8 11:36:19 localhost kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Jul 8 11:36:19 localhost kernel: [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 Jul 8 11:36:19 localhost kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000b9c00000 Jul 8 11:36:19 localhost kernel: [ 0.000000] 0000000000 - 00b9c00000 page 2M Jul 8 11:36:19 localhost kernel: [ 0.000000] kernel direct mapping tables up to b9c00000 @ b98c3000-b98c7000 Jul 8 11:36:19 localhost kernel: [ 0.000000] RAMDISK: 37aea000 - 37ff0000 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: RSDP 00000000000f6440 00024 (v02 LENOVO) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: XSDT 00000000b9b49b7a 00094 (v01 LENOVO TP-7U 00003110 LTP 00000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: FACP 00000000b9b49d00 000F4 (v03 LENOVO TP-7U 00003110 LNVO 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: DSDT 00000000b9b4a10e 0FAC1 (v01 LENOVO TP-7U 00003110 MSFT 03000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: FACS 00000000b9b8e000 00040 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SSDT 00000000b9b49eb4 0025A (v01 LENOVO TP-7U 00003110 MSFT 03000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: ECDT 00000000b9b59bcf 00052 (v01 LENOVO TP-7U 00003110 LNVO 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: APIC 00000000b9b59c21 00078 (v01 LENOVO TP-7U 00003110 LNVO 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: MCFG 00000000b9b59c99 0003C (v01 LENOVO TP-7U 00003110 LNVO 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: HPET 00000000b9b59cd5 00038 (v01 LENOVO TP-7U 00003110 LNVO 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SLIC 00000000b9b59dc2 00176 (v01 LENOVO TP-7U 00003110 LTP 00000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: BOOT 00000000b9b59f38 00028 (v01 LENOVO TP-7U 00003110 LTP 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: ASF! 00000000b9b59f60 000A0 (v16 LENOVO TP-7U 00003110 PTL 00000001) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SSDT 00000000b9b8d1fa 00568 (v01 LENOVO TP-7U 00003110 INTL 20050513) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: TCPA 00000000b9907000 00032 (v00 00000000 00000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SSDT 00000000b98d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SSDT 00000000b98d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: SSDT 00000000b98d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T400 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Jul 8 11:36:19 localhost kernel: [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800b5e00000-ffff8800b87fffff] on node 0 Jul 8 11:36:19 localhost kernel: [ 0.000000] Zone PFN ranges: Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Jul 8 11:36:19 localhost kernel: [ 0.000000] Normal empty Jul 8 11:36:19 localhost kernel: [ 0.000000] Movable zone start PFN for each node Jul 8 11:36:19 localhost kernel: [ 0.000000] early_node_map[5] active PFN ranges Jul 8 11:36:19 localhost kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009e Jul 8 11:36:19 localhost kernel: [ 0.000000] 0: 0x00000100 -> 0x000b96a1 Jul 8 11:36:19 localhost kernel: [ 0.000000] 0: 0x000b96a7 -> 0x000b97b7 Jul 8 11:36:19 localhost kernel: [ 0.000000] 0: 0x000b980f -> 0x000b98c7 Jul 8 11:36:19 localhost kernel: [ 0.000000] 0: 0x000b9bff -> 0x000b9c00 Jul 8 11:36:19 localhost kernel: [ 0.000000] On node 0 totalpages: 759800 Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA zone: 56 pages used for memmap Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA zone: 5 pages reserved Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA zone: 3921 pages, LIFO batch:0 Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA32 zone: 10346 pages used for memmap Jul 8 11:36:19 localhost kernel: [ 0.000000] DMA32 zone: 745472 pages, LIFO batch:31 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Jul 8 11:36:19 localhost kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: IRQ0 used by override. Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: IRQ2 used by override. Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: IRQ9 used by override. Jul 8 11:36:19 localhost kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Jul 8 11:36:19 localhost kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Jul 8 11:36:19 localhost kernel: [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs Jul 8 11:36:19 localhost kernel: [ 0.000000] nr_irqs_gsi: 40 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b96a1000 - 00000000b96a7000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b97b7000 - 00000000b980f000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98c7000 - 00000000b98d2000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98d2000 - 00000000b98d5000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98d5000 - 00000000b98d9000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98d9000 - 00000000b98dd000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98dd000 - 00000000b98e0000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b98e0000 - 00000000b9907000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b9907000 - 00000000b9908000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b9908000 - 00000000b9b0f000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b9b0f000 - 00000000b9b9f000 Jul 8 11:36:19 localhost kernel: [ 0.000000] PM: Registered nosave memory: 00000000b9b9f000 - 00000000b9bff000 Jul 8 11:36:19 localhost kernel: [ 0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:24000000) Jul 8 11:36:19 localhost kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Jul 8 11:36:19 localhost kernel: [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1 Jul 8 11:36:19 localhost kernel: [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800b9400000 s77376 r8192 d20928 u524288 Jul 8 11:36:19 localhost kernel: [ 0.000000] pcpu-alloc: s77376 r8192 d20928 u524288 alloc=1*2097152 Jul 8 11:36:19 localhost kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 Jul 8 11:36:19 localhost kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 749393 Jul 8 11:36:19 localhost kernel: [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/47228efe-de3e-48b8-922d-cdc15612fdc3 ro vga=773 Jul 8 11:36:19 localhost kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Jul 8 11:36:19 localhost kernel: [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Jul 8 11:36:19 localhost kernel: [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Jul 8 11:36:19 localhost kernel: [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 Jul 8 11:36:19 localhost kernel: [ 0.000000] Checking aperture... Jul 8 11:36:19 localhost kernel: [ 0.000000] No AGP bridge found Jul 8 11:36:19 localhost kernel: [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area Jul 8 11:36:19 localhost kernel: [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! Jul 8 11:36:19 localhost kernel: [ 0.000000] Memory: 2977616k/3043328k available (3413k kernel code, 4128k absent, 61584k reserved, 1588k data, 512k init) Jul 8 11:36:19 localhost kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Jul 8 11:36:19 localhost kernel: [ 0.000000] Preemptible hierarchical RCU implementation. Jul 8 11:36:19 localhost kernel: [ 0.000000] NR_IRQS:768 Jul 8 11:36:19 localhost kernel: [ 0.000000] Extended CMOS year: 2000 Jul 8 11:36:19 localhost kernel: [ 0.000000] Console: colour dummy device 80x25 Jul 8 11:36:19 localhost kernel: [ 0.000000] console [tty0] enabled Jul 8 11:36:19 localhost kernel: [ 0.000000] allocated 25165824 bytes of page_cgroup Jul 8 11:36:19 localhost kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Jul 8 11:36:19 localhost kernel: [ 0.000000] hpet clockevent registered Jul 8 11:36:19 localhost kernel: [ 0.000000] Fast TSC calibration using PIT Jul 8 11:36:19 localhost kernel: [ 0.000000] Detected 2660.059 MHz processor. Jul 8 11:36:19 localhost kernel: [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 5322.78 BogoMIPS (lpj=8866863) Jul 8 11:36:19 localhost kernel: [ 0.003345] pid_max: default: 32768 minimum: 301 Jul 8 11:36:19 localhost kernel: [ 0.003406] Security Framework initialized Jul 8 11:36:19 localhost kernel: [ 0.003431] Mount-cache hash table entries: 256 Jul 8 11:36:19 localhost kernel: [ 0.003642] Initializing cgroup subsys cpuacct Jul 8 11:36:19 localhost kernel: [ 0.003657] Initializing cgroup subsys memory Jul 8 11:36:19 localhost kernel: [ 0.003669] Initializing cgroup subsys devices Jul 8 11:36:19 localhost kernel: [ 0.003672] Initializing cgroup subsys freezer Jul 8 11:36:19 localhost kernel: [ 0.003675] Initializing cgroup subsys net_cls Jul 8 11:36:19 localhost kernel: [ 0.003695] Disabled fast string operations Jul 8 11:36:19 localhost kernel: [ 0.003701] CPU: Physical Processor ID: 0 Jul 8 11:36:19 localhost kernel: [ 0.003704] CPU: Processor Core ID: 0 Jul 8 11:36:19 localhost kernel: [ 0.003707] mce: CPU supports 6 MCE banks Jul 8 11:36:19 localhost kernel: [ 0.003716] CPU0: Thermal monitoring enabled (TM2) Jul 8 11:36:19 localhost kernel: [ 0.003721] using mwait in idle threads. Jul 8 11:36:19 localhost kernel: [ 0.004241] ACPI: Core revision 20110413 Jul 8 11:36:19 localhost kernel: [ 0.013729] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Jul 8 11:36:19 localhost kernel: [ 0.047119] CPU0: Intel(R) Core(TM)2 Duo CPU P8800 @ 2.66GHz stepping 0a Jul 8 11:36:19 localhost kernel: [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. Jul 8 11:36:19 localhost kernel: [ 0.049997] ... version: 2 Jul 8 11:36:19 localhost kernel: [ 0.049997] ... bit width: 40 Jul 8 11:36:19 localhost kernel: [ 0.049997] ... generic registers: 2 Jul 8 11:36:19 localhost kernel: [ 0.049997] ... value mask: 000000ffffffffff Jul 8 11:36:19 localhost kernel: [ 0.049997] ... max period: 000000007fffffff Jul 8 11:36:19 localhost kernel: [ 0.049997] ... fixed-purpose events: 3 Jul 8 11:36:19 localhost kernel: [ 0.049997] ... event mask: 0000000700000003 Jul 8 11:36:19 localhost kernel: [ 0.066809] NMI watchdog enabled, takes one hw-pmu counter. Jul 8 11:36:19 localhost kernel: [ 0.093338] Booting Node 0, Processors #1 Jul 8 11:36:19 localhost kernel: [ 0.093342] smpboot cpu 1: start_ip = 99000 Jul 8 11:36:19 localhost kernel: [ 0.006666] Disabled fast string operations Jul 8 11:36:19 localhost kernel: [ 0.190012] NMI watchdog enabled, takes one hw-pmu counter. Jul 8 11:36:19 localhost kernel: [ 0.196657] Brought up 2 CPUs Jul 8 11:36:19 localhost kernel: [ 0.196661] Total of 2 processors activated (10644.43 BogoMIPS). Jul 8 11:36:19 localhost kernel: [ 0.197676] PM: Registering ACPI NVS region at b98c7000 (45056 bytes) Jul 8 11:36:19 localhost kernel: [ 0.197676] PM: Registering ACPI NVS region at b98d9000 (16384 bytes) Jul 8 11:36:19 localhost kernel: [ 0.197676] PM: Registering ACPI NVS region at b98e0000 (159744 bytes) Jul 8 11:36:19 localhost kernel: [ 0.197676] PM: Registering ACPI NVS region at b9b0f000 (589824 bytes) Jul 8 11:36:19 localhost kernel: [ 0.197676] NET: Registered protocol family 16 Jul 8 11:36:19 localhost kernel: [ 0.197676] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it Jul 8 11:36:19 localhost kernel: [ 0.197676] ACPI: bus type pci registered Jul 8 11:36:19 localhost kernel: [ 0.197676] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) Jul 8 11:36:19 localhost kernel: [ 0.197676] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 Jul 8 11:36:19 localhost kernel: [ 0.212488] PCI: Using configuration type 1 for base access Jul 8 11:36:19 localhost kernel: [ 0.212719] bio: create slab <bio-0> at 0 Jul 8 11:36:19 localhost kernel: [ 0.212719] ACPI: Added _OSI(Linux) Jul 8 11:36:19 localhost kernel: [ 0.214330] ACPI: EC: EC description table is found, configuring boot EC Jul 8 11:36:19 localhost kernel: [ 0.218991] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via DMI Jul 8 11:36:19 localhost kernel: [ 0.236821] ACPI: SSDT 00000000b98d7aa0 0030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.237194] ACPI: Dynamic OEM Table Load: Jul 8 11:36:19 localhost kernel: [ 0.237198] ACPI: SSDT (null) 0030A (v01 PmRef Cpu0Ist 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.237314] ACPI: SSDT 00000000b98d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.237705] ACPI: Dynamic OEM Table Load: Jul 8 11:36:19 localhost kernel: [ 0.237709] ACPI: SSDT (null) 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.256832] ACPI: SSDT 00000000b98d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.257217] ACPI: Dynamic OEM Table Load: Jul 8 11:36:19 localhost kernel: [ 0.257221] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.266719] ACPI: SSDT 00000000b98d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.267092] ACPI: Dynamic OEM Table Load: Jul 8 11:36:19 localhost kernel: [ 0.267096] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624) Jul 8 11:36:19 localhost kernel: [ 0.283400] ACPI: Interpreter enabled Jul 8 11:36:19 localhost kernel: [ 0.283405] ACPI: (supports S0 S3 S4 S5) Jul 8 11:36:19 localhost kernel: [ 0.283423] ACPI: Using IOAPIC for interrupt routing Jul 8 11:36:19 localhost kernel: [ 0.293351] ACPI: Power Resource [PUBS] (on) Jul 8 11:36:19 localhost kernel: [ 0.297213] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 Jul 8 11:36:19 localhost kernel: [ 0.297122] ACPI: ACPI Dock Station Driver: 3 docks/bays found Jul 8 11:36:19 localhost kernel: [ 0.297127] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Jul 8 11:36:19 localhost kernel: [ 0.297311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Jul 8 11:36:19 localhost kernel: [ 0.297353] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] Jul 8 11:36:19 localhost kernel: [ 0.297358] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Jul 8 11:36:19 localhost kernel: [ 0.297363] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Jul 8 11:36:19 localhost kernel: [ 0.297368] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] Jul 8 11:36:19 localhost kernel: [ 0.297373] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] Jul 8 11:36:19 localhost kernel: [ 0.297378] pci_root PNP0A08:00: host bridge window [mem 0xbc000000-0xfebfffff] Jul 8 11:36:19 localhost kernel: [ 0.297385] pci_bus 0000:00: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.297393] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 Jul 8 11:36:19 localhost kernel: [ 0.297399] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.297416] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.297420] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.297437] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 Jul 8 11:36:19 localhost kernel: [ 0.297442] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.297450] pci 0000:00:02.0: reg 10: [mem 0xf4400000-0xf47fffff 64bit] Jul 8 11:36:19 localhost kernel: [ 0.297457] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.297462] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] Jul 8 11:36:19 localhost kernel: [ 0.297472] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.297474] pci 0000:00:02.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.297491] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 Jul 8 11:36:19 localhost kernel: [ 0.297495] pci 0000:00:02.1: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.297502] pci 0000:00:02.1: reg 10: [mem 0xf4200000-0xf42fffff 64bit] Jul 8 11:36:19 localhost kernel: [ 0.297522] pci 0000:00:02.1: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.297524] pci 0000:00:02.1: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.297549] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780 Jul 8 11:36:19 localhost kernel: [ 0.297555] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.297565] pci 0000:00:03.0: reg 10: [mem 0xfc226800-0xfc22680f 64bit] Jul 8 11:36:19 localhost kernel: [ 0.297593] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.297595] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.297608] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.297611] pci 0000:00:03.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.297627] pci 0000:00:03.3: [8086:2a47] type 0 class 0x000700 Jul 8 11:36:19 localhost kernel: [ 0.297634] pci 0000:00:03.3: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.297642] pci 0000:00:03.3: reg 10: [io 0x1830-0x1837] Jul 8 11:36:19 localhost kernel: [ 0.297648] pci 0000:00:03.3: reg 14: [mem 0xfc024000-0xfc024fff] Jul 8 11:36:19 localhost kernel: [ 0.297675] pci 0000:00:03.3: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.297678] pci 0000:00:03.3: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300030] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200 Jul 8 11:36:19 localhost kernel: [ 0.300043] pci 0000:00:19.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300056] pci 0000:00:19.0: reg 10: [mem 0xfc000000-0xfc01ffff] Jul 8 11:36:19 localhost kernel: [ 0.300067] pci 0000:00:19.0: reg 14: [mem 0xfc025000-0xfc025fff] Jul 8 11:36:19 localhost kernel: [ 0.300077] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f] Jul 8 11:36:19 localhost kernel: [ 0.300118] pci 0000:00:19.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300121] pci 0000:00:19.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300148] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.300152] pci 0000:00:19.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.300175] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.300182] pci 0000:00:1a.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300231] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f] Jul 8 11:36:19 localhost kernel: [ 0.300254] pci 0000:00:1a.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300257] pci 0000:00:1a.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300291] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.300299] pci 0000:00:1a.1: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300347] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f] Jul 8 11:36:19 localhost kernel: [ 0.300370] pci 0000:00:1a.1: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300373] pci 0000:00:1a.1: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300407] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.300414] pci 0000:00:1a.2: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300463] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf] Jul 8 11:36:19 localhost kernel: [ 0.300486] pci 0000:00:1a.2: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300488] pci 0000:00:1a.2: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300533] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.300545] pci 0000:00:1a.7: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300558] pci 0000:00:1a.7: reg 10: [mem 0xfc226c00-0xfc226fff] Jul 8 11:36:19 localhost kernel: [ 0.300617] pci 0000:00:1a.7: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300619] pci 0000:00:1a.7: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300647] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.300652] pci 0000:00:1a.7: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.300680] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 Jul 8 11:36:19 localhost kernel: [ 0.300683] pci 0000:00:1b.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300701] pci 0000:00:1b.0: reg 10: [mem 0xfc020000-0xfc023fff 64bit] Jul 8 11:36:19 localhost kernel: [ 0.300751] pci 0000:00:1b.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300754] pci 0000:00:1b.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300780] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.300784] pci 0000:00:1b.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.300809] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 Jul 8 11:36:19 localhost kernel: [ 0.300812] pci 0000:00:1c.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300858] pci 0000:00:1c.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300860] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.300892] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.300896] pci 0000:00:1c.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.300923] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604 Jul 8 11:36:19 localhost kernel: [ 0.300926] pci 0000:00:1c.1: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.300972] pci 0000:00:1c.1: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.300975] pci 0000:00:1c.1: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301006] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.301010] pci 0000:00:1c.1: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.301038] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 Jul 8 11:36:19 localhost kernel: [ 0.301042] pci 0000:00:1c.3: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301088] pci 0000:00:1c.3: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301090] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301122] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.301126] pci 0000:00:1c.3: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.301153] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604 Jul 8 11:36:19 localhost kernel: [ 0.301156] pci 0000:00:1c.4: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301202] pci 0000:00:1c.4: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301204] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301236] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.301240] pci 0000:00:1c.4: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.301272] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.301279] pci 0000:00:1d.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301328] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df] Jul 8 11:36:19 localhost kernel: [ 0.301351] pci 0000:00:1d.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301354] pci 0000:00:1d.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301387] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.301394] pci 0000:00:1d.1: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301442] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff] Jul 8 11:36:19 localhost kernel: [ 0.301466] pci 0000:00:1d.1: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301468] pci 0000:00:1d.1: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301501] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.301509] pci 0000:00:1d.2: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301557] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f] Jul 8 11:36:19 localhost kernel: [ 0.301581] pci 0000:00:1d.2: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301583] pci 0000:00:1d.2: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301627] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 Jul 8 11:36:19 localhost kernel: [ 0.301640] pci 0000:00:1d.7: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301653] pci 0000:00:1d.7: reg 10: [mem 0xfc227000-0xfc2273ff] Jul 8 11:36:19 localhost kernel: [ 0.301712] pci 0000:00:1d.7: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301715] pci 0000:00:1d.7: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301742] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.301747] pci 0000:00:1d.7: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.301772] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 Jul 8 11:36:19 localhost kernel: [ 0.301779] pci 0000:00:1e.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301816] pci 0000:00:1e.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301819] pci 0000:00:1e.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.301855] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601 Jul 8 11:36:19 localhost kernel: [ 0.301864] pci 0000:00:1f.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.301956] pci 0000:00:1f.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.301959] pci 0000:00:1f.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.302009] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 Jul 8 11:36:19 localhost kernel: [ 0.302024] pci 0000:00:1f.2: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.302037] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f] Jul 8 11:36:19 localhost kernel: [ 0.302048] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f] Jul 8 11:36:19 localhost kernel: [ 0.302058] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47] Jul 8 11:36:19 localhost kernel: [ 0.302068] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b] Jul 8 11:36:19 localhost kernel: [ 0.302079] pci 0000:00:1f.2: reg 20: [io 0x1c20-0x1c3f] Jul 8 11:36:19 localhost kernel: [ 0.302090] pci 0000:00:1f.2: reg 24: [mem 0xfc226000-0xfc2267ff] Jul 8 11:36:19 localhost kernel: [ 0.302104] pci 0000:00:1f.2: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.302106] pci 0000:00:1f.2: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.302141] pci 0000:00:1f.2: PME# supported from D3hot Jul 8 11:36:19 localhost kernel: [ 0.302145] pci 0000:00:1f.2: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.302167] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 Jul 8 11:36:19 localhost kernel: [ 0.302170] pci 0000:00:1f.3: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.302189] pci 0000:00:1f.3: reg 10: [mem 0xfc227400-0xfc2274ff 64bit] Jul 8 11:36:19 localhost kernel: [ 0.302217] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f] Jul 8 11:36:19 localhost kernel: [ 0.302240] pci 0000:00:1f.3: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.302243] pci 0000:00:1f.3: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.302256] pci_bus 0000:00: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.302260] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.302310] pci_bus 0000:02: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.302313] pci_bus 0000:02: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.302314] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 8 11:36:19 localhost kernel: [ 0.302321] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) Jul 8 11:36:19 localhost kernel: [ 0.302326] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 8 11:36:19 localhost kernel: [ 0.302332] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 8 11:36:19 localhost kernel: [ 0.302334] pci_bus 0000:02: bus scan returning with max=02 Jul 8 11:36:19 localhost kernel: [ 0.302339] pci 0000:00:1c.1: scanning [bus 03-03] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.302388] pci_bus 0000:03: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.302422] pci 0000:03:00.0: [8086:4237] type 0 class 0x000280 Jul 8 11:36:19 localhost kernel: [ 0.302427] pci 0000:03:00.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.302463] pci 0000:03:00.0: reg 10: [mem 0xf4300000-0xf4301fff 64bit] Jul 8 11:36:19 localhost kernel: [ 0.302564] pci 0000:03:00.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.302566] pci 0000:03:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a Jul 8 11:36:19 localhost kernel: [ 0.302619] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.302625] pci 0000:03:00.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.302677] pci_bus 0000:03: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.302679] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 8 11:36:19 localhost kernel: [ 0.302685] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) Jul 8 11:36:19 localhost kernel: [ 0.302690] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] Jul 8 11:36:19 localhost kernel: [ 0.302696] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 8 11:36:19 localhost kernel: [ 0.302698] pci_bus 0000:03: bus scan returning with max=03 Jul 8 11:36:19 localhost kernel: [ 0.302702] pci 0000:00:1c.3: scanning [bus 05-0c] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.302752] pci_bus 0000:05: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.302755] pci_bus 0000:05: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.302756] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] Jul 8 11:36:19 localhost kernel: [ 0.302762] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] Jul 8 11:36:19 localhost kernel: [ 0.302767] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] Jul 8 11:36:19 localhost kernel: [ 0.302774] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.302775] pci_bus 0000:05: bus scan returning with max=05 Jul 8 11:36:19 localhost kernel: [ 0.302780] pci 0000:00:1c.4: scanning [bus 0d-14] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.302831] pci_bus 0000:0d: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.302833] pci_bus 0000:0d: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.302835] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] Jul 8 11:36:19 localhost kernel: [ 0.302841] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] Jul 8 11:36:19 localhost kernel: [ 0.302845] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] Jul 8 11:36:19 localhost kernel: [ 0.302852] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.302854] pci_bus 0000:0d: bus scan returning with max=0d Jul 8 11:36:19 localhost kernel: [ 0.302858] pci 0000:00:1e.0: scanning [bus 15-18] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.302884] pci_bus 0000:15: scanning bus Jul 8 11:36:19 localhost kernel: [ 0.302899] pci 0000:15:00.0: [1180:0476] type 2 class 0x000607 Jul 8 11:36:19 localhost kernel: [ 0.302909] pci 0000:15:00.0: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.302926] pci 0000:15:00.0: reg 10: [mem 0xf4800000-0xf4800fff] Jul 8 11:36:19 localhost kernel: [ 0.302932] pci 0000:15:00.0: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.302955] pci 0000:15:00.0: supports D1 D2 Jul 8 11:36:19 localhost kernel: [ 0.302956] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.302961] pci 0000:15:00.0: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.302984] pci 0000:15:00.1: [1180:0832] type 0 class 0x000c00 Jul 8 11:36:19 localhost kernel: [ 0.302993] pci 0000:15:00.1: calling quirk_mmio_always_on+0x0/0x17 Jul 8 11:36:19 localhost kernel: [ 0.303010] pci 0000:15:00.1: reg 10: [mem 0xf4801000-0xf48017ff] Jul 8 11:36:19 localhost kernel: [ 0.303088] pci 0000:15:00.1: calling quirk_resource_alignment+0x0/0x15c Jul 8 11:36:19 localhost kernel: [ 0.303110] pci 0000:15:00.1: supports D1 D2 Jul 8 11:36:19 localhost kernel: [ 0.303112] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold Jul 8 11:36:19 localhost kernel: [ 0.303117] pci 0000:15:00.1: PME# disabled Jul 8 11:36:19 localhost kernel: [ 0.303194] pci_bus 0000:15: fixups for bus Jul 8 11:36:19 localhost kernel: [ 0.303196] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303203] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] Jul 8 11:36:19 localhost kernel: [ 0.303207] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] Jul 8 11:36:19 localhost kernel: [ 0.303214] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.303216] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303218] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303220] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303221] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303223] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303225] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xfebfffff] (subtractive decode) Jul 8 11:36:19 localhost kernel: [ 0.303229] pci 0000:15:00.0: scanning [bus 16-18] behind bridge, pass 0 Jul 8 11:36:19 localhost kernel: [ 0.303237] pci 0000:15:00.0: scanning [bus 16-18] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303279] pci_bus 0000:15: bus scan returning with max=17 Jul 8 11:36:19 localhost kernel: [ 0.303284] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303290] pci 0000:00:1c.1: scanning [bus 03-03] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303297] pci 0000:00:1c.3: scanning [bus 05-0c] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303304] pci 0000:00:1c.4: scanning [bus 0d-14] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303321] pci 0000:00:1e.0: scanning [bus 15-18] behind bridge, pass 1 Jul 8 11:36:19 localhost kernel: [ 0.303327] pci_bus 0000:00: bus scan returning with max=18 Jul 8 11:36:19 localhost kernel: [ 0.303328] pci_bus 0000:00: on NUMA node 0 Jul 8 11:36:19 localhost kernel: [ 0.303331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303483] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Jul 8 11:36:19 localhost kernel: [ 0.303682] pci0000:00: Requesting ACPI _OSC control (0x1d) Jul 8 11:36:19 localhost kernel: [ 0.303964] pci0000:00: ACPI _OSC control (0x1d) granted Jul 8 11:36:19 localhost kernel: [ 0.307322] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307380] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307434] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307487] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307593] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307646] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307699] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) Jul 8 11:36:19 localhost kernel: [ 0.307769] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none Jul 8 11:36:19 localhost kernel: [ 0.307783] vgaarb: loaded Jul 8 11:36:19 localhost kernel: [ 0.307785] vgaarb: bridge control possible 0000:00:02.0 Jul 8 11:36:19 localhost kernel: [ 0.307818] PCI: Using ACPI for IRQ routing Jul 8 11:36:19 localhost kernel: [ 0.310090] PCI: pci_cache_line_size set to 64 bytes Jul 8 11:36:19 localhost kernel: [ 0.310097] pci 0000:00:02.0: BAR 0: reserving [mem 0xf4400000-0xf47fffff flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310100] pci 0000:00:02.0: BAR 2: reserving [mem 0xd0000000-0xdfffffff flags 0x14220c] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310102] pci 0000:00:02.0: BAR 4: reserving [io 0x1800-0x1807 flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310105] pci 0000:00:02.1: BAR 0: reserving [mem 0xf4200000-0xf42fffff flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310109] pci 0000:00:03.0: BAR 0: reserving [mem 0xfc226800-0xfc22680f flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310112] pci 0000:00:03.3: BAR 0: reserving [io 0x1830-0x1837 flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310115] pci 0000:00:03.3: BAR 1: reserving [mem 0xfc024000-0xfc024fff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310119] pci 0000:00:19.0: BAR 0: reserving [mem 0xfc000000-0xfc01ffff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310121] pci 0000:00:19.0: BAR 1: reserving [mem 0xfc025000-0xfc025fff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310123] pci 0000:00:19.0: BAR 2: reserving [io 0x1840-0x185f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310127] pci 0000:00:1a.0: BAR 4: reserving [io 0x1860-0x187f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310131] pci 0000:00:1a.1: BAR 4: reserving [io 0x1880-0x189f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310135] pci 0000:00:1a.2: BAR 4: reserving [io 0x18a0-0x18bf flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310139] pci 0000:00:1a.7: BAR 0: reserving [mem 0xfc226c00-0xfc226fff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310143] pci 0000:00:1b.0: BAR 0: reserving [mem 0xfc020000-0xfc023fff flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310154] pci 0000:00:1d.0: BAR 4: reserving [io 0x18c0-0x18df flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310158] pci 0000:00:1d.1: BAR 4: reserving [io 0x18e0-0x18ff flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310162] pci 0000:00:1d.2: BAR 4: reserving [io 0x1c00-0x1c1f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310166] pci 0000:00:1d.7: BAR 0: reserving [mem 0xfc227000-0xfc2273ff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310174] pci 0000:00:1f.2: BAR 0: reserving [io 0x1c48-0x1c4f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310176] pci 0000:00:1f.2: BAR 1: reserving [io 0x183c-0x183f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310179] pci 0000:00:1f.2: BAR 2: reserving [io 0x1c40-0x1c47 flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310181] pci 0000:00:1f.2: BAR 3: reserving [io 0x1838-0x183b flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310183] pci 0000:00:1f.2: BAR 4: reserving [io 0x1c20-0x1c3f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310185] pci 0000:00:1f.2: BAR 5: reserving [mem 0xfc226000-0xfc2267ff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310189] pci 0000:00:1f.3: BAR 0: reserving [mem 0xfc227400-0xfc2274ff flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310192] pci 0000:00:1f.3: BAR 4: reserving [io 0x1c60-0x1c7f flags 0x40101] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310197] pci 0000:03:00.0: BAR 0: reserving [mem 0xf4300000-0xf4301fff flags 0x140204] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310202] pci 0000:15:00.0: BAR 0: reserving [mem 0xf4800000-0xf4800fff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310206] pci 0000:15:00.1: BAR 0: reserving [mem 0xf4801000-0xf48017ff flags 0x40200] (d=0, p=0) Jul 8 11:36:19 localhost kernel: [ 0.310255] reserve RAM buffer: 000000000009ec00 - 000000000009ffff Jul 8 11:36:19 localhost kernel: [ 0.310257] reserve RAM buffer: 00000000b96a1000 - 00000000bbffffff Jul 8 11:36:19 localhost kernel: [ 0.310260] reserve RAM buffer: 00000000b97b7000 - 00000000bbffffff Jul 8 11:36:19 localhost kernel: [ 0.310262] reserve RAM buffer: 00000000b98c7000 - 00000000bbffffff Jul 8 11:36:19 localhost kernel: [ 0.310265] reserve RAM buffer: 00000000b9c00000 - 00000000bbffffff Jul 8 11:36:19 localhost kernel: [ 0.310356] NetLabel: Initializing Jul 8 11:36:19 localhost kernel: [ 0.310360] NetLabel: domain hash size = 128 Jul 8 11:36:19 localhost kernel: [ 0.310363] NetLabel: protocols = UNLABELED CIPSOv4 Jul 8 11:36:19 localhost kernel: [ 0.310375] NetLabel: unlabeled traffic allowed by default Jul 8 11:36:19 localhost kernel: [ 0.310383] HPET: 4 timers in total, 0 timers will be used for per-cpu timer Jul 8 11:36:19 localhost kernel: [ 0.310391] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 Jul 8 11:36:19 localhost kernel: [ 0.310397] hpet0: 4 comparators, 64-bit 14.318180 MHz counter Jul 8 11:36:19 localhost kernel: [ 0.320107] Switching to clocksource hpet Jul 8 11:36:19 localhost kernel: [ 0.320107] pnp: PnP ACPI init Jul 8 11:36:19 localhost kernel: [ 0.320107] ACPI: bus type pnp registered Jul 8 11:36:19 localhost kernel: [ 0.340192] Switched to NOHz mode on CPU #0 Jul 8 11:36:19 localhost kernel: [ 0.340194] Switched to NOHz mode on CPU #1 Jul 8 11:36:19 localhost kernel: [ 0.340233] pnp 00:00: [mem 0x00000000-0x0009ffff] Jul 8 11:36:19 localhost kernel: [ 0.340235] pnp 00:00: [mem 0x000c0000-0x000c3fff] Jul 8 11:36:19 localhost kernel: [ 0.340236] pnp 00:00: [mem 0x000c4000-0x000c7fff] Jul 8 11:36:19 localhost kernel: [ 0.340237] pnp 00:00: [mem 0x000c8000-0x000cbfff] Jul 8 11:36:19 localhost kernel: [ 0.340239] pnp 00:00: [mem 0x000cc000-0x000cffff] Jul 8 11:36:19 localhost kernel: [ 0.340240] pnp 00:00: [mem 0x000d0000-0x000d3fff] Jul 8 11:36:19 localhost kernel: [ 0.340242] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] Jul 8 11:36:19 localhost kernel: [ 0.340243] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] Jul 8 11:36:19 localhost kernel: [ 0.340245] pnp 00:00: [mem 0x000dc000-0x000dffff] Jul 8 11:36:19 localhost kernel: [ 0.340246] pnp 00:00: [mem 0x000e0000-0x000e3fff] Jul 8 11:36:19 localhost kernel: [ 0.340248] pnp 00:00: [mem 0x000e4000-0x000e7fff] Jul 8 11:36:19 localhost kernel: [ 0.340249] pnp 00:00: [mem 0x000e8000-0x000ebfff] Jul 8 11:36:19 localhost kernel: [ 0.340250] pnp 00:00: [mem 0x000ec000-0x000effff] Jul 8 11:36:19 localhost kernel: [ 0.340252] pnp 00:00: [mem 0x000f0000-0x000fffff] Jul 8 11:36:19 localhost kernel: [ 0.340253] pnp 00:00: [mem 0x00100000-0xbbffffff] Jul 8 11:36:19 localhost kernel: [ 0.340255] pnp 00:00: [mem 0xfec00000-0xfed3ffff] Jul 8 11:36:19 localhost kernel: [ 0.340256] pnp 00:00: [mem 0xfed4c000-0xffffffff] Jul 8 11:36:19 localhost kernel: [ 0.340301] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340306] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340311] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340315] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.340319] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.340324] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340328] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340333] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340337] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340342] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340346] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340351] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340355] system 00:00: [mem 0x00100000-0xbbffffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340360] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340364] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved Jul 8 11:36:19 localhost kernel: [ 0.340369] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) Jul 8 11:36:19 localhost kernel: [ 0.340385] pnp 00:01: [bus 00-ff] Jul 8 11:36:19 localhost kernel: [ 0.340386] pnp 00:01: [io 0x0cf8-0x0cff] Jul 8 11:36:19 localhost kernel: [ 0.340388] pnp 00:01: [io 0x0000-0x0cf7 window] Jul 8 11:36:19 localhost kernel: [ 0.340390] pnp 00:01: [io 0x0d00-0xffff window] Jul 8 11:36:19 localhost kernel: [ 0.340393] pnp 00:01: [mem 0x000a0000-0x000bffff window] Jul 8 11:36:19 localhost kernel: [ 0.340394] pnp 00:01: [mem 0x000c0000-0x000c3fff window] Jul 8 11:36:19 localhost kernel: [ 0.340396] pnp 00:01: [mem 0x000c4000-0x000c7fff window] Jul 8 11:36:19 localhost kernel: [ 0.340397] pnp 00:01: [mem 0x000c8000-0x000cbfff window] Jul 8 11:36:19 localhost kernel: [ 0.340399] pnp 00:01: [mem 0x000cc000-0x000cffff window] Jul 8 11:36:19 localhost kernel: [ 0.340401] pnp 00:01: [mem 0x000d0000-0x000d3fff window] Jul 8 11:36:19 localhost kernel: [ 0.340402] pnp 00:01: [mem 0x000d4000-0x000d7fff window] Jul 8 11:36:19 localhost kernel: [ 0.340404] pnp 00:01: [mem 0x000d8000-0x000dbfff window] Jul 8 11:36:19 localhost kernel: [ 0.340405] pnp 00:01: [mem 0x000dc000-0x000dffff window] Jul 8 11:36:19 localhost kernel: [ 0.340407] pnp 00:01: [mem 0x000e0000-0x000e3fff window] Jul 8 11:36:19 localhost kernel: [ 0.340409] pnp 00:01: [mem 0x000e4000-0x000e7fff window] Jul 8 11:36:19 localhost kernel: [ 0.340410] pnp 00:01: [mem 0x000e8000-0x000ebfff window] Jul 8 11:36:19 localhost kernel: [ 0.340412] pnp 00:01: [mem 0x000ec000-0x000effff window] Jul 8 11:36:19 localhost kernel: [ 0.340413] pnp 00:01: [mem 0xbc000000-0xfebfffff window] Jul 8 11:36:19 localhost kernel: [ 0.340415] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] Jul 8 11:36:19 localhost kernel: [ 0.340453] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Jul 8 11:36:19 localhost kernel: [ 0.360403] pnp 00:02: [io 0x0010-0x001f] Jul 8 11:36:19 localhost kernel: [ 0.360405] pnp 00:02: [io 0x0090-0x009f] Jul 8 11:36:19 localhost kernel: [ 0.360407] pnp 00:02: [io 0x0024-0x0025] Jul 8 11:36:19 localhost kernel: [ 0.360408] pnp 00:02: [io 0x0028-0x0029] Jul 8 11:36:19 localhost kernel: [ 0.360409] pnp 00:02: [io 0x002c-0x002d] Jul 8 11:36:19 localhost kernel: [ 0.360411] pnp 00:02: [io 0x0030-0x0031] Jul 8 11:36:19 localhost kernel: [ 0.360412] pnp 00:02: [io 0x0034-0x0035] Jul 8 11:36:19 localhost kernel: [ 0.360413] pnp 00:02: [io 0x0038-0x0039] Jul 8 11:36:19 localhost kernel: [ 0.360415] pnp 00:02: [io 0x003c-0x003d] Jul 8 11:36:19 localhost kernel: [ 0.360416] pnp 00:02: [io 0x00a4-0x00a5] Jul 8 11:36:19 localhost kernel: [ 0.360417] pnp 00:02: [io 0x00a8-0x00a9] Jul 8 11:36:19 localhost kernel: [ 0.360418] pnp 00:02: [io 0x00ac-0x00ad] Jul 8 11:36:19 localhost kernel: [ 0.360420] pnp 00:02: [io 0x00b0-0x00b5] Jul 8 11:36:19 localhost kernel: [ 0.360421] pnp 00:02: [io 0x00b8-0x00b9] Jul 8 11:36:19 localhost kernel: [ 0.360422] pnp 00:02: [io 0x00bc-0x00bd] Jul 8 11:36:19 localhost kernel: [ 0.360424] pnp 00:02: [io 0x0050-0x0053] Jul 8 11:36:19 localhost kernel: [ 0.360425] pnp 00:02: [io 0x0072-0x0077] Jul 8 11:36:19 localhost kernel: [ 0.360426] pnp 00:02: [io 0x002e-0x002f] Jul 8 11:36:19 localhost kernel: [ 0.360428] pnp 00:02: [io 0x1000-0x107f] Jul 8 11:36:19 localhost kernel: [ 0.360429] pnp 00:02: [io 0x1180-0x11ff] Jul 8 11:36:19 localhost kernel: [ 0.360430] pnp 00:02: [io 0x0800-0x080f] Jul 8 11:36:19 localhost kernel: [ 0.360432] pnp 00:02: [io 0x15e0-0x15ef] Jul 8 11:36:19 localhost kernel: [ 0.360433] pnp 00:02: [io 0x1600-0x167f] Jul 8 11:36:19 localhost kernel: [ 0.360434] pnp 00:02: [io 0x1680-0x169f] Jul 8 11:36:19 localhost kernel: [ 0.360436] pnp 00:02: [mem 0xe0000000-0xefffffff] Jul 8 11:36:19 localhost kernel: [ 0.360437] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] Jul 8 11:36:19 localhost kernel: [ 0.360439] pnp 00:02: [mem 0xfed10000-0xfed13fff] Jul 8 11:36:19 localhost kernel: [ 0.360442] pnp 00:02: [mem 0xfed18000-0xfed18fff] Jul 8 11:36:19 localhost kernel: [ 0.360443] pnp 00:02: [mem 0xfed19000-0xfed19fff] Jul 8 11:36:19 localhost kernel: [ 0.360444] pnp 00:02: [mem 0xfed45000-0xfed4bfff] Jul 8 11:36:19 localhost kernel: [ 0.360504] system 00:02: [io 0x1000-0x107f] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360509] system 00:02: [io 0x1180-0x11ff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360513] system 00:02: [io 0x0800-0x080f] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360517] system 00:02: [io 0x15e0-0x15ef] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360521] system 00:02: [io 0x1600-0x167f] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360525] system 00:02: [io 0x1680-0x169f] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360529] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360534] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360538] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360543] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360547] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360551] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved Jul 8 11:36:19 localhost kernel: [ 0.360556] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 8 11:36:19 localhost kernel: [ 0.360584] pnp 00:03: [mem 0xfed00000-0xfed003ff] Jul 8 11:36:19 localhost kernel: [ 0.360605] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) Jul 8 11:36:19 localhost kernel: [ 0.360612] pnp 00:04: [io 0x0000-0x000f] Jul 8 11:36:19 localhost kernel: [ 0.360613] pnp 00:04: [io 0x0080-0x008f] Jul 8 11:36:19 localhost kernel: [ 0.360615] pnp 00:04: [io 0x00c0-0x00df] Jul 8 11:36:19 localhost kernel: [ 0.360616] pnp 00:04: [dma 4] Jul 8 11:36:19 localhost kernel: [ 0.360635] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) Jul 8 11:36:19 localhost kernel: [ 0.360641] pnp 00:05: [io 0x0061] Jul 8 11:36:19 localhost kernel: [ 0.360662] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) Jul 8 11:36:19 localhost kernel: [ 0.360668] pnp 00:06: [io 0x00f0] Jul 8 11:36:19 localhost kernel: [ 0.360676] pnp 00:06: [irq 13] Jul 8 11:36:19 localhost kernel: [ 0.360695] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) Jul 8 11:36:19 localhost kernel: [ 0.360702] pnp 00:07: [io 0x0070-0x0071] Jul 8 11:36:19 localhost kernel: [ 0.360706] pnp 00:07: [irq 8] Jul 8 11:36:19 localhost kernel: [ 0.360725] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) Jul 8 11:36:19 localhost kernel: [ 0.360733] pnp 00:08: [io 0x0060] Jul 8 11:36:19 localhost kernel: [ 0.360735] pnp 00:08: [io 0x0064] Jul 8 11:36:19 localhost kernel: [ 0.360739] pnp 00:08: [irq 1] Jul 8 11:36:19 localhost kernel: [ 0.360760] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) Jul 8 11:36:19 localhost kernel: [ 0.360770] pnp 00:09: [irq 12] Jul 8 11:36:19 localhost kernel: [ 0.360790] pnp 00:09: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) Jul 8 11:36:19 localhost kernel: [ 0.380767] pnp 00:0a: [mem 0xfed40000-0xfed44fff] Jul 8 11:36:19 localhost kernel: [ 0.380803] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c31 (active) Jul 8 11:36:19 localhost kernel: [ 0.381214] pnp: PnP ACPI: found 11 devices Jul 8 11:36:19 localhost kernel: [ 0.381218] ACPI: ACPI bus type pnp unregistered Jul 8 11:36:19 localhost kernel: [ 0.386622] PCI: max bus depth: 2 pci_try_num: 3 Jul 8 11:36:19 localhost kernel: [ 0.386690] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbc000000-0xbc1fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386697] pci 0000:00:1c.1: BAR 13: assigned [io 0x8000-0x8fff] Jul 8 11:36:19 localhost kernel: [ 0.386702] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbc200000-0xbc3fffff] Jul 8 11:36:19 localhost kernel: [ 0.386708] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbc400000-0xbc5fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386714] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff] Jul 8 11:36:19 localhost kernel: [ 0.386718] pci 0000:00:1c.0: PCI bridge to [bus 02-02] Jul 8 11:36:19 localhost kernel: [ 0.386723] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] Jul 8 11:36:19 localhost kernel: [ 0.386731] pci 0000:00:1c.0: bridge window [mem 0xbc200000-0xbc3fffff] Jul 8 11:36:19 localhost kernel: [ 0.386738] pci 0000:00:1c.0: bridge window [mem 0xbc400000-0xbc5fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386748] pci 0000:00:1c.1: PCI bridge to [bus 03-03] Jul 8 11:36:19 localhost kernel: [ 0.386753] pci 0000:00:1c.1: bridge window [io 0x8000-0x8fff] Jul 8 11:36:19 localhost kernel: [ 0.386760] pci 0000:00:1c.1: bridge window [mem 0xf4300000-0xf43fffff] Jul 8 11:36:19 localhost kernel: [ 0.386767] pci 0000:00:1c.1: bridge window [mem 0xbc000000-0xbc1fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386777] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] Jul 8 11:36:19 localhost kernel: [ 0.386782] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] Jul 8 11:36:19 localhost kernel: [ 0.386789] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff] Jul 8 11:36:19 localhost kernel: [ 0.386796] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386806] pci 0000:00:1c.4: PCI bridge to [bus 0d-14] Jul 8 11:36:19 localhost kernel: [ 0.386811] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] Jul 8 11:36:19 localhost kernel: [ 0.386818] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff] Jul 8 11:36:19 localhost kernel: [ 0.386825] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386836] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref] Jul 8 11:36:19 localhost kernel: [ 0.386842] pci 0000:15:00.0: BAR 16: assigned [mem 0xc0000000-0xc3ffffff] Jul 8 11:36:19 localhost kernel: [ 0.386847] pci 0000:15:00.0: BAR 13: assigned [io 0x4000-0x40ff] Jul 8 11:36:19 localhost kernel: [ 0.386851] pci 0000:15:00.0: BAR 14: assigned [io 0x4400-0x44ff] Jul 8 11:36:19 localhost kernel: [ 0.386855] pci 0000:15:00.0: CardBus bridge to [bus 16-17] Jul 8 11:36:19 localhost kernel: [ 0.386859] pci 0000:15:00.0: bridge window [io 0x4000-0x40ff] Jul 8 11:36:19 localhost kernel: [ 0.386866] pci 0000:15:00.0: bridge window [io 0x4400-0x44ff] Jul 8 11:36:19 localhost kernel: [ 0.386873] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref] Jul 8 11:36:19 localhost kernel: [ 0.386881] pci 0000:15:00.0: bridge window [mem 0xc0000000-0xc3ffffff] Jul 8 11:36:19 localhost kernel: [ 0.386889] pci 0000:00:1e.0: PCI bridge to [bus 15-18] Jul 8 11:36:19 localhost kernel: [ 0.386893] pci 0000:00:1e.0: bridge window [io 0x4000-0x7fff] Jul 8 11:36:19 localhost kernel: [ 0.386901] pci 0000:00:1e.0: bridge window [mem 0xf4800000-0xf7ffffff] Jul 8 11:36:19 localhost kernel: [ 0.386908] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.386925] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jul 8 11:36:19 localhost kernel: [ 0.386933] pci 0000:00:1c.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.386940] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jul 8 11:36:19 localhost kernel: [ 0.386947] pci 0000:00:1c.1: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.386955] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 Jul 8 11:36:19 localhost kernel: [ 0.386961] pci 0000:00:1c.3: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.386967] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jul 8 11:36:19 localhost kernel: [ 0.386974] pci 0000:00:1c.4: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.386981] pci 0000:00:1e.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.386990] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 8 11:36:19 localhost kernel: [ 0.386998] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] Jul 8 11:36:19 localhost kernel: [ 0.387000] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] Jul 8 11:36:19 localhost kernel: [ 0.387002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] Jul 8 11:36:19 localhost kernel: [ 0.387003] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] Jul 8 11:36:19 localhost kernel: [ 0.387005] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] Jul 8 11:36:19 localhost kernel: [ 0.387007] pci_bus 0000:00: resource 9 [mem 0xbc000000-0xfebfffff] Jul 8 11:36:19 localhost kernel: [ 0.387009] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] Jul 8 11:36:19 localhost kernel: [ 0.387010] pci_bus 0000:02: resource 1 [mem 0xbc200000-0xbc3fffff] Jul 8 11:36:19 localhost kernel: [ 0.387012] pci_bus 0000:02: resource 2 [mem 0xbc400000-0xbc5fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.387014] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] Jul 8 11:36:19 localhost kernel: [ 0.387016] pci_bus 0000:03: resource 1 [mem 0xf4300000-0xf43fffff] Jul 8 11:36:19 localhost kernel: [ 0.387017] pci_bus 0000:03: resource 2 [mem 0xbc000000-0xbc1fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.387019] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff] Jul 8 11:36:19 localhost kernel: [ 0.387021] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff] Jul 8 11:36:19 localhost kernel: [ 0.387023] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.387024] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] Jul 8 11:36:19 localhost kernel: [ 0.387026] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff] Jul 8 11:36:19 localhost kernel: [ 0.387028] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.387029] pci_bus 0000:15: resource 0 [io 0x4000-0x7fff] Jul 8 11:36:19 localhost kernel: [ 0.387031] pci_bus 0000:15: resource 1 [mem 0xf4800000-0xf7ffffff] Jul 8 11:36:19 localhost kernel: [ 0.387033] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 0.387034] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7] Jul 8 11:36:19 localhost kernel: [ 0.387036] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff] Jul 8 11:36:19 localhost kernel: [ 0.387038] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff] Jul 8 11:36:19 localhost kernel: [ 0.387039] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff] Jul 8 11:36:19 localhost kernel: [ 0.387041] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff] Jul 8 11:36:19 localhost kernel: [ 0.387043] pci_bus 0000:15: resource 9 [mem 0xbc000000-0xfebfffff] Jul 8 11:36:19 localhost kernel: [ 0.387044] pci_bus 0000:16: resource 0 [io 0x4000-0x40ff] Jul 8 11:36:19 localhost kernel: [ 0.387046] pci_bus 0000:16: resource 1 [io 0x4400-0x44ff] Jul 8 11:36:19 localhost kernel: [ 0.387048] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref] Jul 8 11:36:19 localhost kernel: [ 0.387049] pci_bus 0000:16: resource 3 [mem 0xc0000000-0xc3ffffff] Jul 8 11:36:19 localhost kernel: [ 0.387094] NET: Registered protocol family 2 Jul 8 11:36:19 localhost kernel: [ 0.387158] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) Jul 8 11:36:19 localhost kernel: [ 0.387758] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Jul 8 11:36:19 localhost kernel: [ 0.389360] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Jul 8 11:36:19 localhost kernel: [ 0.389858] TCP: Hash tables configured (established 262144 bind 65536) Jul 8 11:36:19 localhost kernel: [ 0.389862] TCP reno registered Jul 8 11:36:19 localhost kernel: [ 0.389867] UDP hash table entries: 2048 (order: 4, 65536 bytes) Jul 8 11:36:19 localhost kernel: [ 0.389903] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) Jul 8 11:36:19 localhost kernel: [ 0.390152] NET: Registered protocol family 1 Jul 8 11:36:19 localhost kernel: [ 0.390174] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390178] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390180] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390183] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390188] pci 0000:00:02.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390190] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390192] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390194] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390197] pci 0000:00:02.0: Boot video device Jul 8 11:36:19 localhost kernel: [ 0.390200] pci 0000:00:02.1: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390202] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390204] pci 0000:00:02.1: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390207] pci 0000:00:02.1: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390210] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390212] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390214] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390217] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390220] pci 0000:00:03.3: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390222] pci 0000:00:03.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390225] pci 0000:00:03.3: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390227] pci 0000:00:03.3: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390231] pci 0000:00:19.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390233] pci 0000:00:19.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390235] pci 0000:00:19.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390237] pci 0000:00:19.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390241] pci 0000:00:1a.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390243] pci 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390246] pci 0000:00:1a.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390252] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390254] pci 0000:00:1a.0: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390267] pci 0000:00:1a.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390271] pci 0000:00:1a.1: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390273] pci 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390275] pci 0000:00:1a.1: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390281] pci 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390283] pci 0000:00:1a.1: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390295] pci 0000:00:1a.1: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390299] pci 0000:00:1a.2: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390301] pci 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390303] pci 0000:00:1a.2: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390309] pci 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390311] pci 0000:00:1a.2: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390324] pci 0000:00:1a.2: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390328] pci 0000:00:1a.7: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390330] pci 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390333] pci 0000:00:1a.7: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390358] pci 0000:00:1a.7: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390363] pci 0000:00:1b.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390365] pci 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390367] pci 0000:00:1b.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390369] pci 0000:00:1b.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390374] pci 0000:00:1c.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390376] pci 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390378] pci 0000:00:1c.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390380] pci 0000:00:1c.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390384] pci 0000:00:1c.1: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390386] pci 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390389] pci 0000:00:1c.1: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390391] pci 0000:00:1c.1: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390395] pci 0000:00:1c.3: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390397] pci 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390399] pci 0000:00:1c.3: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390402] pci 0000:00:1c.3: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390406] pci 0000:00:1c.4: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390408] pci 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390410] pci 0000:00:1c.4: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390412] pci 0000:00:1c.4: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390417] pci 0000:00:1d.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390419] pci 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390421] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390427] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390428] pci 0000:00:1d.0: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390441] pci 0000:00:1d.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390445] pci 0000:00:1d.1: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390447] pci 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390450] pci 0000:00:1d.1: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390456] pci 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390457] pci 0000:00:1d.1: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390470] pci 0000:00:1d.1: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390474] pci 0000:00:1d.2: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390476] pci 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390478] pci 0000:00:1d.2: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390484] pci 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x00c0 Jul 8 11:36:19 localhost kernel: [ 0.390485] pci 0000:00:1d.2: Performing full reset Jul 8 11:36:19 localhost kernel: [ 0.390499] pci 0000:00:1d.2: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390503] pci 0000:00:1d.7: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390505] pci 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390507] pci 0000:00:1d.7: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390521] pci 0000:00:1d.7: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390525] pci 0000:00:1e.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390527] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390530] pci 0000:00:1e.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390532] pci 0000:00:1e.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390536] pci 0000:00:1f.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390538] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390540] pci 0000:00:1f.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390543] pci 0000:00:1f.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390547] pci 0000:00:1f.2: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390549] pci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390552] pci 0000:00:1f.2: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390554] pci 0000:00:1f.2: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390558] pci 0000:00:1f.3: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390560] pci 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390562] pci 0000:00:1f.3: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390564] pci 0000:00:1f.3: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390569] pci 0000:03:00.0: calling quirk_e100_interrupt+0x0/0x169 Jul 8 11:36:19 localhost kernel: [ 0.390571] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390573] pci 0000:03:00.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390575] pci 0000:03:00.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390581] pci 0000:15:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390585] pci 0000:15:00.0: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390587] pci 0000:15:00.0: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390591] pci 0000:15:00.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:36:19 localhost kernel: [ 0.390593] pci 0000:15:00.1: calling quirk_usb_early_handoff+0x0/0x57c Jul 8 11:36:19 localhost kernel: [ 0.390596] pci 0000:15:00.1: calling pci_fixup_video+0x0/0xa9 Jul 8 11:36:19 localhost kernel: [ 0.390599] PCI: CLS 64 bytes, default 64 Jul 8 11:36:19 localhost kernel: [ 0.390645] Unpacking initramfs... Jul 8 11:36:19 localhost kernel: [ 0.482530] Freeing initrd memory: 5144k freed Jul 8 11:36:19 localhost kernel: [ 0.484706] Simple Boot Flag at 0x35 set to 0x1 Jul 8 11:36:19 localhost kernel: [ 0.484995] audit: initializing netlink socket (disabled) Jul 8 11:36:19 localhost kernel: [ 0.485012] type=2000 audit(1310105161.483:1): initialized Jul 8 11:36:19 localhost kernel: [ 0.493288] VFS: Disk quotas dquot_6.5.2 Jul 8 11:36:19 localhost kernel: [ 0.493377] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jul 8 11:36:19 localhost kernel: [ 0.493420] msgmni has been set to 5825 Jul 8 11:36:19 localhost kernel: [ 0.493583] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Jul 8 11:36:19 localhost kernel: [ 0.493590] io scheduler noop registered Jul 8 11:36:19 localhost kernel: [ 0.493593] io scheduler deadline registered Jul 8 11:36:19 localhost kernel: [ 0.493627] io scheduler cfq registered (default) Jul 8 11:36:19 localhost kernel: [ 0.493724] pcieport 0000:00:1c.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.493775] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 0.493870] pcieport 0000:00:1c.1: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.493916] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 0.494007] pcieport 0000:00:1c.3: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.494053] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 0.494142] pcieport 0000:00:1c.4: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.494188] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 0.494293] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt Jul 8 11:36:19 localhost kernel: [ 0.494301] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded Jul 8 11:36:19 localhost kernel: [ 0.494319] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt Jul 8 11:36:19 localhost kernel: [ 0.494323] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt Jul 8 11:36:19 localhost kernel: [ 0.494330] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded Jul 8 11:36:19 localhost kernel: [ 0.494349] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt Jul 8 11:36:19 localhost kernel: [ 0.494356] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded Jul 8 11:36:19 localhost kernel: [ 0.494373] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt Jul 8 11:36:19 localhost kernel: [ 0.494380] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded Jul 8 11:36:19 localhost kernel: [ 0.494425] vesafb: mode is 1024x768x8, linelength=1024, pages=41 Jul 8 11:36:19 localhost kernel: [ 0.494429] vesafb: scrolling: redraw Jul 8 11:36:19 localhost kernel: [ 0.494433] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 Jul 8 11:36:19 localhost kernel: [ 0.494837] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 1536k, total 32704k Jul 8 11:36:19 localhost kernel: [ 0.501249] Console: switching to colour frame buffer device 128x48 Jul 8 11:36:19 localhost kernel: [ 0.508929] fb0: VESA VGA frame buffer device Jul 8 11:36:19 localhost kernel: [ 0.509022] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Jul 8 11:36:19 localhost kernel: [ 0.660138] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:36:19 localhost kernel: [ 0.680520] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A Jul 8 11:36:19 localhost kernel: [ 0.720104] Linux agpgart interface v0.103 Jul 8 11:36:19 localhost kernel: [ 0.720218] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 Jul 8 11:36:19 localhost kernel: [ 0.728622] serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 8 11:36:19 localhost kernel: [ 0.728703] serio: i8042 AUX port at 0x60,0x64 irq 12 Jul 8 11:36:19 localhost kernel: [ 0.728808] mousedev: PS/2 mouse device common for all mice Jul 8 11:36:19 localhost kernel: [ 0.728929] rtc_cmos 00:07: RTC can wake from S4 Jul 8 11:36:19 localhost kernel: [ 0.729068] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 8 11:36:19 localhost kernel: [ 0.729168] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Jul 8 11:36:19 localhost kernel: [ 0.729255] cpuidle: using governor ladder Jul 8 11:36:19 localhost kernel: [ 0.729304] cpuidle: using governor menu Jul 8 11:36:19 localhost kernel: [ 0.729542] TCP cubic registered Jul 8 11:36:19 localhost kernel: [ 0.729583] NET: Registered protocol family 17 Jul 8 11:36:19 localhost kernel: [ 0.729693] PM: Hibernation image not present or could not be loaded. Jul 8 11:36:19 localhost kernel: [ 0.730062] rtc_cmos 00:07: setting system clock to 2011-07-08 06:06:02 UTC (1310105162) Jul 8 11:36:19 localhost kernel: [ 0.730295] Freeing unused kernel memory: 512k freed Jul 8 11:36:19 localhost kernel: [ 0.735054] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Jul 8 11:36:19 localhost kernel: [ 0.820933] SCSI subsystem initialized Jul 8 11:36:19 localhost kernel: [ 0.829657] libata version 3.00 loaded. Jul 8 11:36:19 localhost kernel: [ 0.830757] ahci 0000:00:1f.2: version 3.0 Jul 8 11:36:19 localhost kernel: [ 0.830772] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 Jul 8 11:36:19 localhost kernel: [ 0.833130] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 0.833163] ahci: SSS flag set, parallel bus scan disabled Jul 8 11:36:19 localhost kernel: [ 0.835517] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode Jul 8 11:36:19 localhost kernel: [ 0.837938] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs Jul 8 11:36:19 localhost kernel: [ 0.840378] ahci 0000:00:1f.2: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 0.840750] scsi0 : ahci Jul 8 11:36:19 localhost kernel: [ 0.843196] scsi1 : ahci Jul 8 11:36:19 localhost kernel: [ 0.845627] scsi2 : ahci Jul 8 11:36:19 localhost kernel: [ 0.848008] scsi3 : ahci Jul 8 11:36:19 localhost kernel: [ 0.850510] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 44 Jul 8 11:36:19 localhost kernel: [ 0.852898] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 44 Jul 8 11:36:19 localhost kernel: [ 0.855250] ata3: DUMMY Jul 8 11:36:19 localhost kernel: [ 0.857551] ata4: DUMMY Jul 8 11:36:19 localhost kernel: [ 1.176692] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jul 8 11:36:19 localhost kernel: [ 1.179859] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded Jul 8 11:36:19 localhost kernel: [ 1.179862] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Jul 8 11:36:19 localhost kernel: [ 1.182183] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out Jul 8 11:36:19 localhost kernel: [ 1.221722] ata1.00: ATA-8: ST9160412AS, 0003LVM1, max UDMA/100 Jul 8 11:36:19 localhost kernel: [ 1.223997] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) Jul 8 11:36:19 localhost kernel: [ 1.228478] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded Jul 8 11:36:19 localhost kernel: [ 1.228481] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Jul 8 11:36:19 localhost kernel: [ 1.230785] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out Jul 8 11:36:19 localhost kernel: [ 1.234838] ata1.00: configured for UDMA/100 Jul 8 11:36:19 localhost kernel: [ 1.237180] scsi 0:0:0:0: Direct-Access ATA ST9160412AS 0003 PQ: 0 ANSI: 5 Jul 8 11:36:19 localhost kernel: [ 1.486701] Refined TSC clocksource calibration: 2659.999 MHz. Jul 8 11:36:19 localhost kernel: [ 1.488935] Switching to clocksource tsc Jul 8 11:36:19 localhost kernel: [ 1.556683] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 8 11:36:19 localhost kernel: [ 1.563989] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded Jul 8 11:36:19 localhost kernel: [ 1.564834] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded Jul 8 11:36:19 localhost kernel: [ 1.568505] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX12, max UDMA/133 Jul 8 11:36:19 localhost kernel: [ 1.576719] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded Jul 8 11:36:19 localhost kernel: [ 1.577623] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded Jul 8 11:36:19 localhost kernel: [ 1.581530] ata2.00: configured for UDMA/133 Jul 8 11:36:19 localhost kernel: [ 1.700740] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX12 PQ: 0 ANSI: 5 Jul 8 11:36:19 localhost kernel: [ 1.707799] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) Jul 8 11:36:19 localhost kernel: [ 1.710220] sd 0:0:0:0: [sda] Write Protect is off Jul 8 11:36:19 localhost kernel: [ 1.712588] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 8 11:36:19 localhost kernel: [ 1.712603] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 8 11:36:19 localhost kernel: [ 1.796709] sda: sda1 sda2 sda3 < sda5 sda6 > Jul 8 11:36:19 localhost kernel: [ 1.799377] sd 0:0:0:0: [sda] Attached SCSI disk Jul 8 11:36:19 localhost kernel: [ 1.917812] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Jul 8 11:36:19 localhost kernel: [ 1.920265] cdrom: Uniform CD-ROM driver Revision: 3.20 Jul 8 11:36:19 localhost kernel: [ 1.922758] sr 1:0:0:0: Attached scsi CD-ROM sr0 Jul 8 11:36:19 localhost kernel: [ 2.886264] EXT3-fs: barriers not enabled Jul 8 11:36:19 localhost kernel: [ 2.903645] kjournald starting. Commit interval 5 seconds Jul 8 11:36:19 localhost kernel: [ 2.903680] EXT3-fs (sda6): mounted filesystem with writeback data mode Jul 8 11:36:19 localhost kernel: [ 5.852600] Non-volatile memory driver v1.3 Jul 8 11:36:19 localhost kernel: [ 5.927505] wmi: Mapper loaded Jul 8 11:36:19 localhost kernel: [ 6.028133] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Jul 8 11:36:19 localhost kernel: [ 6.028286] ACPI: AC Adapter [AC] (on-line) Jul 8 11:36:19 localhost kernel: [ 6.166984] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 Jul 8 11:36:19 localhost kernel: [ 6.167441] ACPI: Lid Switch [LID] Jul 8 11:36:19 localhost kernel: [ 6.167482] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 Jul 8 11:36:19 localhost kernel: [ 6.167551] ACPI: Sleep Button [SLPB] Jul 8 11:36:19 localhost kernel: [ 6.167609] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 Jul 8 11:36:19 localhost kernel: [ 6.167655] ACPI: Power Button [PWRF] Jul 8 11:36:19 localhost kernel: [ 6.174621] thermal LNXTHERM:00: registered as thermal_zone0 Jul 8 11:36:19 localhost kernel: [ 6.174623] ACPI: Thermal Zone [THM0] (49 C) Jul 8 11:36:19 localhost kernel: [ 6.175520] thermal LNXTHERM:01: registered as thermal_zone1 Jul 8 11:36:19 localhost kernel: [ 6.175522] ACPI: Thermal Zone [THM1] (42 C) Jul 8 11:36:19 localhost kernel: [ 6.181573] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared Jul 8 11:36:19 localhost kernel: [ 6.181581] ACPI: Battery Slot [BAT0] (battery present) Jul 8 11:36:19 localhost kernel: [ 6.198861] input: PC Speaker as /devices/platform/pcspkr/input/input4 Jul 8 11:36:19 localhost kernel: [ 6.492397] agpgart-intel 0000:00:00.0: Intel GM45 Chipset Jul 8 11:36:19 localhost kernel: [ 6.492557] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable Jul 8 11:36:19 localhost kernel: [ 6.493815] agpgart-intel 0000:00:00.0: detected 32768K stolen memory Jul 8 11:36:19 localhost kernel: [ 6.493913] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Jul 8 11:36:19 localhost kernel: [ 7.046130] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Jul 8 11:36:19 localhost kernel: [ 7.196351] ACPI: acpi_idle registered with cpuidle Jul 8 11:36:19 localhost kernel: [ 7.201319] Monitor-Mwait will be used to enter C-1 state Jul 8 11:36:19 localhost kernel: [ 7.204682] Monitor-Mwait will be used to enter C-2 state Jul 8 11:36:19 localhost kernel: [ 7.208037] Monitor-Mwait will be used to enter C-3 state Jul 8 11:36:19 localhost kernel: [ 7.208044] Marking TSC unstable due to TSC halts in idle Jul 8 11:36:19 localhost kernel: [ 7.208899] Switching to clocksource hpet Jul 8 11:36:19 localhost kernel: [ 7.242702] sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 8 11:36:19 localhost kernel: [ 7.242743] sr 1:0:0:0: Attached scsi generic sg1 type 5 Jul 8 11:36:19 localhost kernel: [ 7.406766] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6] Jul 8 11:36:19 localhost kernel: [ 7.534350] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 Jul 8 11:36:19 localhost kernel: [ 7.534354] yenta_cardbus 0000:15:00.0: Socket status: 30000006 Jul 8 11:36:19 localhost kernel: [ 7.534360] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x4000-0x7fff] Jul 8 11:36:19 localhost kernel: [ 7.534362] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4800000-0xf7ffffff] Jul 8 11:36:19 localhost kernel: [ 7.534365] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4800000-0xf7ffffff: excluding 0xf4800000-0xf4b7ffff Jul 8 11:36:19 localhost kernel: [ 7.534375] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref] Jul 8 11:36:19 localhost kernel: [ 7.534377] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff: excluding 0xf0000000-0xf3ffffff Jul 8 11:36:19 localhost kernel: [ 7.546682] tpm_tis 00:0a: 1.2 TPM (device-id 0x1020, rev-id 6) Jul 8 11:36:19 localhost kernel: [ 7.546684] tpm_tis 00:0a: Intel iTPM workaround enabled Jul 8 11:36:19 localhost kernel: [ 7.822566] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000 Jul 8 11:36:19 localhost kernel: [ 7.822574] serio: Synaptics pass-through port at isa0060/serio1/input0 Jul 8 11:36:19 localhost kernel: [ 7.868320] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 Jul 8 11:36:19 localhost kernel: [ 8.224661] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff Jul 8 11:36:19 localhost kernel: [ 8.224714] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff Jul 8 11:36:19 localhost kernel: [ 8.224760] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff Jul 8 11:36:19 localhost kernel: [ 8.241387] usbcore: registered new interface driver usbfs Jul 8 11:36:19 localhost kernel: [ 8.241503] usbcore: registered new interface driver hub Jul 8 11:36:19 localhost kernel: [ 8.241538] usbcore: registered new device driver usb Jul 8 11:36:19 localhost kernel: [ 8.336598] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:36:19 localhost kernel: [ 8.402691] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 Jul 8 11:36:19 localhost kernel: [ 8.403020] thinkpad_acpi: ThinkPad ACPI Extras v0.24 Jul 8 11:36:19 localhost kernel: [ 8.403022] thinkpad_acpi: http://ibm-acpi.sf.net/ Jul 8 11:36:19 localhost kernel: [ 8.403024] thinkpad_acpi: ThinkPad BIOS 7UET81WW (3.11 ), EC 7VHT16WW-1.06 Jul 8 11:36:19 localhost kernel: [ 8.403025] thinkpad_acpi: Lenovo ThinkPad T400, model 64756D6 Jul 8 11:36:19 localhost kernel: [ 8.423771] thinkpad_acpi: detected a 8-level brightness capable ThinkPad Jul 8 11:36:19 localhost kernel: [ 8.423916] thinkpad_acpi: radio switch found; radios are enabled Jul 8 11:36:19 localhost kernel: [ 8.425883] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked Jul 8 11:36:19 localhost kernel: [ 8.426296] Registered led device: tpacpi::thinklight Jul 8 11:36:19 localhost kernel: [ 8.426320] Registered led device: tpacpi::power Jul 8 11:36:19 localhost kernel: [ 8.426336] Registered led device: tpacpi::standby Jul 8 11:36:19 localhost kernel: [ 8.428787] Registered led device: tpacpi::thinkvantage Jul 8 11:36:19 localhost kernel: [ 8.430874] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one Jul 8 11:36:19 localhost kernel: [ 8.430938] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) Jul 8 11:36:19 localhost kernel: [ 8.431736] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 Jul 8 11:36:19 localhost kernel: [ 8.662221] Error: Driver 'pcspkr' is already registered, aborting... Jul 8 11:36:19 localhost kernel: [ 8.672851] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 Jul 8 11:36:19 localhost kernel: [ 8.672854] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. Jul 8 11:36:19 localhost kernel: [ 8.672886] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jul 8 11:36:19 localhost kernel: [ 8.672897] e1000e 0000:00:19.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 8.673040] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 8.859413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 8 11:36:19 localhost kernel: [ 8.859419] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 Jul 8 11:36:19 localhost kernel: [ 8.868826] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:22:68:1d:d8:4a Jul 8 11:36:19 localhost kernel: [ 8.868830] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection Jul 8 11:36:19 localhost kernel: [ 8.868852] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF Jul 8 11:36:19 localhost kernel: [ 8.869223] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 8.869227] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 8.869236] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 Jul 8 11:36:19 localhost kernel: [ 8.869262] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 8.869266] ehci_hcd 0000:00:1a.7: EHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 8.869283] drivers/usb/core/inode.c: creating file 'devices' Jul 8 11:36:19 localhost kernel: [ 8.869286] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 8.869290] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 Jul 8 11:36:19 localhost kernel: [ 8.869299] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 Jul 8 11:36:19 localhost kernel: [ 8.869303] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch Jul 8 11:36:19 localhost kernel: [ 8.869331] ehci_hcd 0000:00:1a.7: debug port 1 Jul 8 11:36:19 localhost kernel: [ 8.869335] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 8 11:36:19 localhost kernel: [ 8.873231] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported Jul 8 11:36:19 localhost kernel: [ 8.873234] ehci_hcd 0000:00:1a.7: supports USB remote wakeup Jul 8 11:36:19 localhost kernel: [ 8.873255] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 Jul 8 11:36:19 localhost kernel: [ 8.873260] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 8 11:36:19 localhost kernel: [ 8.877143] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN Jul 8 11:36:19 localhost kernel: [ 8.886698] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 Jul 8 11:36:19 localhost kernel: [ 8.886764] usb usb1: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 8.886769] usb usb1: udev 1, busnum 1, minor = 0 Jul 8 11:36:19 localhost kernel: [ 8.886771] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 8 11:36:19 localhost kernel: [ 8.886772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 8.886774] usb usb1: Product: EHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 8.886776] usb usb1: Manufacturer: Linux 3.0.0-rc6-wl+ ehci_hcd Jul 8 11:36:19 localhost kernel: [ 8.886777] usb usb1: SerialNumber: 0000:00:1a.7 Jul 8 11:36:19 localhost kernel: [ 8.886834] usb usb1: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 8.886837] usb usb1: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 8.886844] usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 8.886863] hub 1-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 8.886864] hub 1-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 8.886866] hub 1-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 8.886870] hub 1-0:1.0: 6 ports detected Jul 8 11:36:19 localhost kernel: [ 8.887052] hub 1-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 8.887053] hub 1-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 8.887055] hub 1-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 8.887057] hub 1-0:1.0: power on to power good time: 20ms Jul 8 11:36:19 localhost kernel: [ 8.887061] hub 1-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 8.887062] hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 8.887093] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 8.887139] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 8.887144] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 8.887157] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Jul 8 11:36:19 localhost kernel: [ 8.887178] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 8.887182] ehci_hcd 0000:00:1d.7: EHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 8.887188] drivers/usb/core/inode.c: creating file '002' Jul 8 11:36:19 localhost kernel: [ 8.887191] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 Jul 8 11:36:19 localhost kernel: [ 8.887200] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 Jul 8 11:36:19 localhost kernel: [ 8.887204] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch Jul 8 11:36:19 localhost kernel: [ 8.887231] ehci_hcd 0000:00:1d.7: debug port 1 Jul 8 11:36:19 localhost kernel: [ 8.887235] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 8 11:36:19 localhost kernel: [ 8.891116] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported Jul 8 11:36:19 localhost kernel: [ 8.891117] ehci_hcd 0000:00:1d.7: supports USB remote wakeup Jul 8 11:36:19 localhost kernel: [ 8.891134] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 Jul 8 11:36:19 localhost kernel: [ 8.891138] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 8 11:36:19 localhost kernel: [ 8.895019] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN Jul 8 11:36:19 localhost kernel: [ 8.900083] firewire_core: created device fw0: GUID 00016c2000b8118e, S400 Jul 8 11:36:19 localhost kernel: [ 8.903351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Jul 8 11:36:19 localhost kernel: [ 8.903371] usb usb2: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 8.903376] usb usb2: udev 1, busnum 2, minor = 128 Jul 8 11:36:19 localhost kernel: [ 8.903377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 Jul 8 11:36:19 localhost kernel: [ 8.903379] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 8.903380] usb usb2: Product: EHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 8.903382] usb usb2: Manufacturer: Linux 3.0.0-rc6-wl+ ehci_hcd Jul 8 11:36:19 localhost kernel: [ 8.903383] usb usb2: SerialNumber: 0000:00:1d.7 Jul 8 11:36:19 localhost kernel: [ 8.903423] usb usb2: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 8.903424] usb usb2: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 8.903430] usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 8.903447] hub 2-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 8.903448] hub 2-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 8.903450] hub 2-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 8.903453] hub 2-0:1.0: 6 ports detected Jul 8 11:36:19 localhost kernel: [ 8.903455] hub 2-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 8.903456] hub 2-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 8.903457] hub 2-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 8.903459] hub 2-0:1.0: power on to power good time: 20ms Jul 8 11:36:19 localhost kernel: [ 8.903461] hub 2-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 8.903463] hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 8.903496] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 8.986714] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:36:19 localhost kernel: [ 8.986720] hub 1-0:1.0: port 3: status 0501 change 0001 Jul 8 11:36:19 localhost kernel: [ 8.986731] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:36:19 localhost kernel: [ 8.986735] hub 1-0:1.0: port 4: status 0501 change 0001 Jul 8 11:36:19 localhost kernel: [ 8.986753] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:36:19 localhost kernel: [ 8.986755] hub 1-0:1.0: port 6: status 0501 change 0001 Jul 8 11:36:19 localhost kernel: [ 9.003425] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.086721] hub 1-0:1.0: state 7 ports 6 chg 0058 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.086734] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s Jul 8 11:36:19 localhost kernel: [ 9.101967] uhci_hcd: USB Universal Host Controller Interface driver Jul 8 11:36:19 localhost kernel: [ 9.102080] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.102083] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.102096] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jul 8 11:36:19 localhost kernel: [ 9.102110] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.102113] uhci_hcd 0000:00:1a.0: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.102124] drivers/usb/core/inode.c: creating file '003' Jul 8 11:36:19 localhost kernel: [ 9.102131] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 Jul 8 11:36:19 localhost kernel: [ 9.102147] uhci_hcd 0000:00:1a.0: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.102152] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.102153] uhci_hcd 0000:00:1a.0: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.102171] uhci_hcd 0000:00:1a.0: supports USB remote wakeup Jul 8 11:36:19 localhost kernel: [ 9.102202] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 Jul 8 11:36:19 localhost kernel: [ 9.102259] usb usb3: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.102264] usb usb3: udev 1, busnum 3, minor = 256 Jul 8 11:36:19 localhost kernel: [ 9.102266] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.102267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.102269] usb usb3: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.102271] usb usb3: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.102272] usb usb3: SerialNumber: 0000:00:1a.0 Jul 8 11:36:19 localhost kernel: [ 9.102400] usb usb3: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.102403] usb usb3: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.102409] usb usb3: adding 3-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.102448] hub 3-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.102450] hub 3-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.102452] hub 3-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.102456] hub 3-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.102457] hub 3-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.102459] hub 3-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.102461] hub 3-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.102462] hub 3-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.102465] hub 3-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.102467] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.102486] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.102520] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0 Jul 8 11:36:19 localhost kernel: [ 9.102543] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jul 8 11:36:19 localhost kernel: [ 9.102550] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.102553] uhci_hcd 0000:00:1a.1: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.102558] drivers/usb/core/inode.c: creating file '004' Jul 8 11:36:19 localhost kernel: [ 9.102561] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 Jul 8 11:36:19 localhost kernel: [ 9.102569] uhci_hcd 0000:00:1a.1: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.102573] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.102574] uhci_hcd 0000:00:1a.1: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.102602] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 Jul 8 11:36:19 localhost kernel: [ 9.102649] usb usb4: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.102653] usb usb4: udev 1, busnum 4, minor = 384 Jul 8 11:36:19 localhost kernel: [ 9.102655] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.102656] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.102658] usb usb4: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.102659] usb usb4: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.102661] usb usb4: SerialNumber: 0000:00:1a.1 Jul 8 11:36:19 localhost kernel: [ 9.102742] usb usb4: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.102744] usb usb4: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.102750] usb usb4: adding 4-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.102788] hub 4-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.102790] hub 4-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.102792] hub 4-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.102796] hub 4-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.102797] hub 4-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.102798] hub 4-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.102799] hub 4-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.102801] hub 4-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.102804] hub 4-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.102805] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.102825] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.102856] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.1 Jul 8 11:36:19 localhost kernel: [ 9.102881] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.102883] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.102895] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Jul 8 11:36:19 localhost kernel: [ 9.102904] uhci_hcd 0000:00:1a.2: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.102907] uhci_hcd 0000:00:1a.2: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.102914] drivers/usb/core/inode.c: creating file '005' Jul 8 11:36:19 localhost kernel: [ 9.102918] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 Jul 8 11:36:19 localhost kernel: [ 9.102927] uhci_hcd 0000:00:1a.2: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.102932] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.102934] uhci_hcd 0000:00:1a.2: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.102950] uhci_hcd 0000:00:1a.2: supports USB remote wakeup Jul 8 11:36:19 localhost kernel: [ 9.102967] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 Jul 8 11:36:19 localhost kernel: [ 9.103007] usb usb5: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.103012] usb usb5: udev 1, busnum 5, minor = 512 Jul 8 11:36:19 localhost kernel: [ 9.103014] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.103016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.103017] usb usb5: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103019] usb usb5: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.103020] usb usb5: SerialNumber: 0000:00:1a.2 Jul 8 11:36:19 localhost kernel: [ 9.103091] usb usb5: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.103093] usb usb5: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.103097] usb usb5: adding 5-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.103133] hub 5-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.103135] hub 5-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.103137] hub 5-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.103140] hub 5-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.103141] hub 5-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.103142] hub 5-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.103143] hub 5-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.103145] hub 5-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.103148] hub 5-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.103149] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.103164] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.103191] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.2 Jul 8 11:36:19 localhost kernel: [ 9.103206] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.103209] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 9.103213] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 8 11:36:19 localhost kernel: [ 9.103219] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.103221] uhci_hcd 0000:00:1d.0: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103226] drivers/usb/core/inode.c: creating file '006' Jul 8 11:36:19 localhost kernel: [ 9.103229] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 Jul 8 11:36:19 localhost kernel: [ 9.103236] uhci_hcd 0000:00:1d.0: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.103240] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.103242] uhci_hcd 0000:00:1d.0: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.103255] uhci_hcd 0000:00:1d.0: supports USB remote wakeup Jul 8 11:36:19 localhost kernel: [ 9.103260] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 Jul 8 11:36:19 localhost kernel: [ 9.103288] usb usb6: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.103292] usb usb6: udev 1, busnum 6, minor = 640 Jul 8 11:36:19 localhost kernel: [ 9.103294] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.103295] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.103297] usb usb6: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103298] usb usb6: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.103300] usb usb6: SerialNumber: 0000:00:1d.0 Jul 8 11:36:19 localhost kernel: [ 9.103399] usb usb6: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.103401] usb usb6: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.103406] usb usb6: adding 6-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.103421] hub 6-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.103423] hub 6-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.103425] hub 6-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.103428] hub 6-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.103429] hub 6-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.103430] hub 6-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.103432] hub 6-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.103433] hub 6-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.103436] hub 6-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.103437] hub 6-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.103455] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.103485] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0 Jul 8 11:36:19 localhost kernel: [ 9.103498] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:36:19 localhost kernel: [ 9.103503] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.103506] uhci_hcd 0000:00:1d.1: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103510] drivers/usb/core/inode.c: creating file '007' Jul 8 11:36:19 localhost kernel: [ 9.103514] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 Jul 8 11:36:19 localhost kernel: [ 9.103520] uhci_hcd 0000:00:1d.1: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.103525] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.103526] uhci_hcd 0000:00:1d.1: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.103543] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 Jul 8 11:36:19 localhost kernel: [ 9.103573] usb usb7: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.103577] usb usb7: udev 1, busnum 7, minor = 768 Jul 8 11:36:19 localhost kernel: [ 9.103579] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.103580] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.103582] usb usb7: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103583] usb usb7: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.103585] usb usb7: SerialNumber: 0000:00:1d.1 Jul 8 11:36:19 localhost kernel: [ 9.103623] usb usb7: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.103625] usb usb7: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.103629] usb usb7: adding 7-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.103645] hub 7-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.103646] hub 7-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.103648] hub 7-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.103651] hub 7-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.103652] hub 7-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.103653] hub 7-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.103654] hub 7-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.103656] hub 7-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.103658] hub 7-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.103660] hub 7-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.103673] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.103701] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1 Jul 8 11:36:19 localhost kernel: [ 9.103715] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jul 8 11:36:19 localhost kernel: [ 9.103722] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.103725] uhci_hcd 0000:00:1d.2: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103728] drivers/usb/core/inode.c: creating file '008' Jul 8 11:36:19 localhost kernel: [ 9.103735] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 Jul 8 11:36:19 localhost kernel: [ 9.103742] uhci_hcd 0000:00:1d.2: detected 2 ports Jul 8 11:36:19 localhost kernel: [ 9.103747] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 Jul 8 11:36:19 localhost kernel: [ 9.103748] uhci_hcd 0000:00:1d.2: Performing full reset Jul 8 11:36:19 localhost kernel: [ 9.103772] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 Jul 8 11:36:19 localhost kernel: [ 9.103803] usb usb8: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.103807] usb usb8: udev 1, busnum 8, minor = 896 Jul 8 11:36:19 localhost kernel: [ 9.103808] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 Jul 8 11:36:19 localhost kernel: [ 9.103810] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 8 11:36:19 localhost kernel: [ 9.103812] usb usb8: Product: UHCI Host Controller Jul 8 11:36:19 localhost kernel: [ 9.103813] usb usb8: Manufacturer: Linux 3.0.0-rc6-wl+ uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.103815] usb usb8: SerialNumber: 0000:00:1d.2 Jul 8 11:36:19 localhost kernel: [ 9.103852] usb usb8: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.103854] usb usb8: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.103858] usb usb8: adding 8-0:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.103876] hub 8-0:1.0: usb_probe_interface Jul 8 11:36:19 localhost kernel: [ 9.103877] hub 8-0:1.0: usb_probe_interface - got id Jul 8 11:36:19 localhost kernel: [ 9.103879] hub 8-0:1.0: USB hub found Jul 8 11:36:19 localhost kernel: [ 9.103882] hub 8-0:1.0: 2 ports detected Jul 8 11:36:19 localhost kernel: [ 9.103883] hub 8-0:1.0: standalone hub Jul 8 11:36:19 localhost kernel: [ 9.103884] hub 8-0:1.0: no power switching (usb 1.0) Jul 8 11:36:19 localhost kernel: [ 9.103885] hub 8-0:1.0: individual port over-current protection Jul 8 11:36:19 localhost kernel: [ 9.103887] hub 8-0:1.0: power on to power good time: 2ms Jul 8 11:36:19 localhost kernel: [ 9.103890] hub 8-0:1.0: local power source is good Jul 8 11:36:19 localhost kernel: [ 9.103891] hub 8-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:36:19 localhost kernel: [ 9.103905] drivers/usb/core/inode.c: creating file '001' Jul 8 11:36:19 localhost kernel: [ 9.103939] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2 Jul 8 11:36:19 localhost kernel: [ 9.143545] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion Jul 8 11:36:19 localhost kernel: [ 9.143550] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT Jul 8 11:36:19 localhost kernel: [ 9.143555] hub 1-0:1.0: port 3 not reset yet, waiting 50ms Jul 8 11:36:19 localhost kernel: [ 9.196720] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC Jul 8 11:36:19 localhost kernel: [ 9.196751] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s Jul 8 11:36:19 localhost kernel: [ 9.200059] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 Jul 8 11:36:19 localhost kernel: [ 9.200063] hub 4-0:1.0: port 1: status 0101 change 0001 Jul 8 11:36:19 localhost kernel: [ 9.200074] uhci_hcd 0000:00:1a.1: port 2 portsc 0082,00 Jul 8 11:36:19 localhost kernel: [ 9.200093] uhci_hcd 0000:00:1a.2: port 2 portsc 0082,00 Jul 8 11:36:19 localhost kernel: [ 9.208108] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:36:19 localhost kernel: [ 9.208168] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 9.208197] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 9.250294] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion Jul 8 11:36:19 localhost kernel: [ 9.250298] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT Jul 8 11:36:19 localhost kernel: [ 9.250302] hub 1-0:1.0: port 4 not reset yet, waiting 50ms Jul 8 11:36:19 localhost kernel: [ 9.303392] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC Jul 8 11:36:19 localhost kernel: [ 9.303414] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s Jul 8 11:36:19 localhost kernel: [ 9.356918] ehci_hcd 0000:00:1a.7: port 6 high speed Jul 8 11:36:19 localhost kernel: [ 9.356921] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:36:19 localhost kernel: [ 9.410045] usb 1-6: new high speed USB device number 4 using ehci_hcd Jul 8 11:36:19 localhost kernel: [ 9.463667] ehci_hcd 0000:00:1a.7: port 6 high speed Jul 8 11:36:19 localhost kernel: [ 9.463671] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:36:19 localhost kernel: [ 9.540812] usb 1-6: skipped 1 descriptor after configuration Jul 8 11:36:19 localhost kernel: [ 9.540816] usb 1-6: skipped 5 descriptors after interface Jul 8 11:36:19 localhost kernel: [ 9.540819] usb 1-6: skipped 1 descriptor after endpoint Jul 8 11:36:19 localhost kernel: [ 9.540822] usb 1-6: skipped 9 descriptors after interface Jul 8 11:36:19 localhost kernel: [ 9.541198] usb 1-6: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.544950] usb 1-6: udev 4, busnum 1, minor = 3 Jul 8 11:36:19 localhost kernel: [ 9.544952] usb 1-6: New USB device found, idVendor=17ef, idProduct=1004 Jul 8 11:36:19 localhost kernel: [ 9.544955] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 Jul 8 11:36:19 localhost kernel: [ 9.544958] usb 1-6: Product: Integrated Camera Jul 8 11:36:19 localhost kernel: [ 9.544961] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. Jul 8 11:36:19 localhost kernel: [ 9.544963] usb 1-6: SerialNumber: SN0001 Jul 8 11:36:19 localhost kernel: [ 9.545052] usb 1-6: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.545056] usb 1-6: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.545315] usb 1-6: adding 1-6:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.546592] usb 1-6: adding 1-6:1.1 (config #1, interface 1) Jul 8 11:36:19 localhost kernel: [ 9.546628] drivers/usb/core/inode.c: creating file '004' Jul 8 11:36:19 localhost kernel: [ 9.546645] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010 Jul 8 11:36:19 localhost kernel: [ 9.546652] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.546656] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.546660] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.546675] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 9.546678] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0004 Jul 8 11:36:19 localhost kernel: [ 9.546687] hub 4-0:1.0: port 1, status 0101, change 0000, 12 Mb/s Jul 8 11:36:19 localhost kernel: [ 9.653376] usb 4-1: new full speed USB device number 2 using uhci_hcd Jul 8 11:36:19 localhost kernel: [ 9.780040] usb 4-1: ep0 maxpacket = 8 Jul 8 11:36:19 localhost kernel: [ 9.811666] usb 4-1: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 9.820661] usb 4-1: udev 2, busnum 4, minor = 385 Jul 8 11:36:19 localhost kernel: [ 9.820664] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810 Jul 8 11:36:19 localhost kernel: [ 9.820666] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 Jul 8 11:36:19 localhost kernel: [ 9.820667] usb 4-1: Product: Fingerprint Sensor Jul 8 11:36:19 localhost kernel: [ 9.820739] usb 4-1: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 9.820742] usb 4-1: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 9.823690] usb 4-1: adding 4-1:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 9.823750] drivers/usb/core/inode.c: creating file '002' Jul 8 11:36:19 localhost kernel: [ 9.823782] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 Jul 8 11:36:19 localhost kernel: [ 9.823792] hub 4-0:1.0: port 2, status 0101, change 0001, 12 Mb/s Jul 8 11:36:19 localhost kernel: [ 9.842853] [drm] Initialized drm 1.1.0 20060810 Jul 8 11:36:19 localhost kernel: [ 9.943389] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 Jul 8 11:36:19 localhost kernel: [ 10.050014] usb 4-2: new full speed USB device number 3 using uhci_hcd Jul 8 11:36:19 localhost kernel: [ 10.200686] usb 4-2: skipped 1 descriptor after interface Jul 8 11:36:19 localhost kernel: [ 10.204677] usb 4-2: default language 0x0409 Jul 8 11:36:19 localhost kernel: [ 10.215666] usb 4-2: udev 3, busnum 4, minor = 386 Jul 8 11:36:19 localhost kernel: [ 10.215669] usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 Jul 8 11:36:19 localhost kernel: [ 10.215672] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 8 11:36:19 localhost kernel: [ 10.215675] usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II Jul 8 11:36:19 localhost kernel: [ 10.215678] usb 4-2: Manufacturer: Lenovo Computer Corp Jul 8 11:36:19 localhost kernel: [ 10.215760] usb 4-2: usb_probe_device Jul 8 11:36:19 localhost kernel: [ 10.215764] usb 4-2: configuration #1 chosen from 1 choice Jul 8 11:36:19 localhost kernel: [ 10.218695] usb 4-2: adding 4-2:1.0 (config #1, interface 0) Jul 8 11:36:19 localhost kernel: [ 10.218767] usb 4-2: adding 4-2:1.1 (config #1, interface 1) Jul 8 11:36:19 localhost kernel: [ 10.218820] usb 4-2: adding 4-2:1.2 (config #1, interface 2) Jul 8 11:36:19 localhost kernel: [ 10.218865] usb 4-2: adding 4-2:1.3 (config #1, interface 3) Jul 8 11:36:19 localhost kernel: [ 10.218881] drivers/usb/core/inode.c: creating file '003' Jul 8 11:36:19 localhost kernel: [ 10.218900] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:36:19 localhost kernel: [ 10.218906] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 Jul 8 11:36:19 localhost kernel: [ 10.346705] usb usb3: suspend_rh (auto-stop) Jul 8 11:36:19 localhost kernel: [ 10.346729] usb usb6: suspend_rh (auto-stop) Jul 8 11:36:19 localhost kernel: [ 10.346752] usb usb7: suspend_rh (auto-stop) Jul 8 11:36:19 localhost kernel: [ 10.346773] usb usb8: suspend_rh (auto-stop) Jul 8 11:36:19 localhost kernel: [ 10.346802] usb usb5: suspend_rh (auto-stop) Jul 8 11:36:19 localhost kernel: [ 12.233653] i915 0000:00:02.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 12.233657] i915 0000:00:02.0: power state changed by ACPI to D0 Jul 8 11:36:19 localhost kernel: [ 12.233663] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 8 11:36:19 localhost kernel: [ 12.233667] i915 0000:00:02.0: setting latency timer to 64 Jul 8 11:36:19 localhost kernel: [ 12.307667] i915 0000:00:02.0: irq 47 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 12.307672] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Jul 8 11:36:19 localhost kernel: [ 12.307673] [drm] Driver supports precise vblank timestamp query. Jul 8 11:36:19 localhost kernel: [ 12.307725] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem Jul 8 11:36:19 localhost kernel: [ 12.500125] hub 5-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500134] usb usb5: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500137] usb usb5: suspend_rh Jul 8 11:36:19 localhost kernel: [ 12.500157] hub 2-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500161] usb usb2: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500164] ehci_hcd 0000:00:1d.7: suspend root hub Jul 8 11:36:19 localhost kernel: [ 12.500190] hub 3-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500194] usb usb3: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500197] usb usb3: suspend_rh Jul 8 11:36:19 localhost kernel: [ 12.500214] hub 6-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500219] usb usb6: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500221] usb usb6: suspend_rh Jul 8 11:36:19 localhost kernel: [ 12.500242] hub 7-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500244] usb usb7: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500246] usb usb7: suspend_rh Jul 8 11:36:19 localhost kernel: [ 12.500260] hub 8-0:1.0: hub_suspend Jul 8 11:36:19 localhost kernel: [ 12.500262] usb usb8: bus auto-suspend Jul 8 11:36:19 localhost kernel: [ 12.500264] usb usb8: suspend_rh Jul 8 11:36:19 localhost kernel: [ 13.037032] checking generic (d0000000 1ff0000) vs hw (d0000000 10000000) Jul 8 11:36:19 localhost kernel: [ 13.037035] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver Jul 8 11:36:19 localhost kernel: [ 13.037060] Console: switching to colour dummy device 80x25 Jul 8 11:36:19 localhost kernel: [ 13.037489] fbcon: inteldrmfb (fb0) is primary device Jul 8 11:36:19 localhost kernel: [ 13.077221] Console: switching to colour frame buffer device 180x56 Jul 8 11:36:19 localhost kernel: [ 13.079868] fb0: inteldrmfb frame buffer device Jul 8 11:36:19 localhost kernel: [ 13.079869] drm: registered panic notifier Jul 8 11:36:19 localhost kernel: [ 13.128138] acpi device:02: registered as cooling_device2 Jul 8 11:36:19 localhost kernel: [ 13.128320] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 Jul 8 11:36:19 localhost kernel: [ 13.128345] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Jul 8 11:36:19 localhost kernel: [ 13.128482] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Jul 8 11:36:19 localhost kernel: [ 13.517879] EXT3-fs (sda6): using internal journal Jul 8 11:36:19 localhost kernel: [ 13.640354] Adding 2003364k swap on /dev/sda5. Priority:-1 extents:1 across:2003364k Jul 8 11:36:19 localhost kernel: [ 13.944016] IBM TrackPoint firmware: 0x0e, buttons: 3/3 Jul 8 11:36:19 localhost kernel: [ 14.182093] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 Jul 8 11:36:19 localhost kernel: [ 14.993521] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 15.046754] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X Jul 8 11:36:19 localhost kernel: [ 16.694240] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Jul 8 11:36:19 localhost kernel: [ 16.694245] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Jul 8 11:36:20 localhost kernel: [ 18.033319] NET: Registered protocol family 10 Jul 8 11:36:30 localhost kernel: [ 28.216712] eth0: no IPv6 routers present Jul 8 11:37:47 localhost kernel: [ 104.965211] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 Jul 8 11:37:47 localhost kernel: [ 104.965225] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:37:47 localhost kernel: [ 104.965235] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Jul 8 11:37:47 localhost kernel: [ 105.083443] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Jul 8 11:37:47 localhost kernel: [ 105.136947] ehci_hcd 0000:00:1a.7: port 1 high speed Jul 8 11:37:47 localhost kernel: [ 105.136950] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:37:47 localhost kernel: [ 105.190017] usb 1-1: new high speed USB device number 5 using ehci_hcd Jul 8 11:37:47 localhost kernel: [ 105.253572] ehci_hcd 0000:00:1a.7: port 1 high speed Jul 8 11:37:47 localhost kernel: [ 105.253576] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:37:47 localhost kernel: [ 105.333854] usb 1-1: default language 0x0409 Jul 8 11:37:47 localhost kernel: [ 105.334226] usb 1-1: udev 5, busnum 1, minor = 4 Jul 8 11:37:47 localhost kernel: [ 105.334230] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271 Jul 8 11:37:47 localhost kernel: [ 105.334233] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 Jul 8 11:37:47 localhost kernel: [ 105.334236] usb 1-1: Product: USB2.0 WLAN Jul 8 11:37:47 localhost kernel: [ 105.334238] usb 1-1: Manufacturer: ATHEROS Jul 8 11:37:47 localhost kernel: [ 105.334241] usb 1-1: SerialNumber: 12345 Jul 8 11:37:47 localhost kernel: [ 105.334344] usb 1-1: usb_probe_device Jul 8 11:37:47 localhost kernel: [ 105.334348] usb 1-1: configuration #1 chosen from 1 choice Jul 8 11:37:47 localhost kernel: [ 105.334598] usb 1-1: adding 1-1:1.0 (config #1, interface 0) Jul 8 11:37:47 localhost kernel: [ 105.334750] drivers/usb/core/inode.c: creating file '005' Jul 8 11:37:47 localhost kernel: [ 105.338144] usb usb2: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.338148] ehci_hcd 0000:00:1d.7: resume root hub Jul 8 11:37:47 localhost kernel: [ 105.363372] hub 2-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.363423] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.363455] usb usb3: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.363459] usb usb3: wakeup_rh Jul 8 11:37:47 localhost kernel: [ 105.400083] hub 3-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.400125] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.400272] usb usb5: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.400274] usb usb5: wakeup_rh Jul 8 11:37:47 localhost kernel: [ 105.436718] hub 5-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.436762] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.436794] usb usb6: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.436797] usb usb6: wakeup_rh Jul 8 11:37:47 localhost kernel: [ 105.473356] hub 6-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.473375] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.473406] usb usb7: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.473408] usb usb7: wakeup_rh Jul 8 11:37:47 localhost kernel: [ 105.510025] hub 7-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.510045] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.510081] usb usb8: usb auto-resume Jul 8 11:37:47 localhost kernel: [ 105.510084] usb usb8: wakeup_rh Jul 8 11:37:47 localhost kernel: [ 105.546692] hub 8-0:1.0: hub_resume Jul 8 11:37:47 localhost kernel: [ 105.546712] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:37:47 localhost kernel: [ 105.710490] cfg80211: Calling CRDA to update world regulatory domain Jul 8 11:37:47 localhost kernel: [ 105.853710] cfg80211: World regulatory domain updated: Jul 8 11:37:47 localhost kernel: [ 105.853713] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 8 11:37:47 localhost kernel: [ 105.853715] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:47 localhost kernel: [ 105.853717] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:47 localhost kernel: [ 105.853718] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:47 localhost kernel: [ 105.853720] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:47 localhost kernel: [ 105.853722] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:48 localhost kernel: [ 106.488724] ath9k_htc 1-1:1.0: usb_probe_interface Jul 8 11:37:48 localhost kernel: [ 106.488729] ath9k_htc 1-1:1.0: usb_probe_interface - got id Jul 8 11:37:48 localhost kernel: [ 106.596736] usb usb3: suspend_rh (auto-stop) Jul 8 11:37:48 localhost kernel: [ 106.596764] usb usb5: suspend_rh (auto-stop) Jul 8 11:37:48 localhost kernel: [ 106.596789] usb usb6: suspend_rh (auto-stop) Jul 8 11:37:48 localhost kernel: [ 106.596815] usb usb7: suspend_rh (auto-stop) Jul 8 11:37:48 localhost kernel: [ 106.596846] usb usb8: suspend_rh (auto-stop) Jul 8 11:37:48 localhost kernel: [ 106.833747] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 Jul 8 11:37:49 localhost kernel: [ 107.068730] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits Jul 8 11:37:49 localhost kernel: [ 107.258968] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 Jul 8 11:37:49 localhost kernel: [ 107.258972] ath: EEPROM regdomain: 0x0 Jul 8 11:37:49 localhost kernel: [ 107.258973] ath: EEPROM indicates default country code should be used Jul 8 11:37:49 localhost kernel: [ 107.258975] ath: doing EEPROM country->regdmn map search Jul 8 11:37:49 localhost kernel: [ 107.258978] ath: country maps to regdmn code: 0x3a Jul 8 11:37:49 localhost kernel: [ 107.258981] ath: Country alpha2 being used: US Jul 8 11:37:49 localhost kernel: [ 107.258982] ath: Regpair used: 0x3a Jul 8 11:37:49 localhost kernel: [ 107.363388] hub 2-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.363398] usb usb2: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.363401] ehci_hcd 0000:00:1d.7: suspend root hub Jul 8 11:37:49 localhost kernel: [ 107.389387] ieee80211 phy0: Atheros AR9271 Rev:1 Jul 8 11:37:49 localhost kernel: [ 107.389402] cfg80211: Calling CRDA for country: US Jul 8 11:37:49 localhost kernel: [ 107.390518] Registered led device: ath9k_htc-phy0 Jul 8 11:37:49 localhost kernel: [ 107.390522] usb 1-1: ath9k_htc: USB layer initialized Jul 8 11:37:49 localhost kernel: [ 107.390696] usbcore: registered new interface driver ath9k_htc Jul 8 11:37:49 localhost kernel: [ 107.391473] cfg80211: Regulatory domain changed to country: US Jul 8 11:37:49 localhost kernel: [ 107.391475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jul 8 11:37:49 localhost kernel: [ 107.391477] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) Jul 8 11:37:49 localhost kernel: [ 107.391479] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Jul 8 11:37:49 localhost kernel: [ 107.391481] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:49 localhost kernel: [ 107.391483] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:49 localhost kernel: [ 107.391485] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jul 8 11:37:49 localhost kernel: [ 107.391486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Jul 8 11:37:49 localhost kernel: [ 107.400095] hub 3-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.400105] usb usb3: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.400109] usb usb3: suspend_rh Jul 8 11:37:49 localhost kernel: [ 107.436703] hub 5-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.436711] usb usb5: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.436714] usb usb5: suspend_rh Jul 8 11:37:49 localhost kernel: [ 107.473390] hub 6-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.473400] usb usb6: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.473404] usb usb6: suspend_rh Jul 8 11:37:49 localhost kernel: [ 107.510061] hub 7-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.510068] usb usb7: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.510070] usb usb7: suspend_rh Jul 8 11:37:49 localhost kernel: [ 107.546703] hub 8-0:1.0: hub_suspend Jul 8 11:37:49 localhost kernel: [ 107.546709] usb usb8: bus auto-suspend Jul 8 11:37:49 localhost kernel: [ 107.546712] usb usb8: suspend_rh Jul 8 11:37:55 localhost kernel: [ 113.137817] PM: Syncing filesystems ... done. Jul 8 11:37:55 localhost kernel: [ 113.138020] PM: Preparing system for mem sleep Jul 8 11:38:05 localhost kernel: [ 113.949379] Freezing user space processes ... (elapsed 0.01 seconds) done. Jul 8 11:38:05 localhost kernel: [ 113.960061] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Jul 8 11:38:05 localhost kernel: [ 113.973415] PM: Entering mem sleep Jul 8 11:38:05 localhost kernel: [ 113.973481] Suspending console(s) (use no_console_suspend to debug) Jul 8 11:38:05 localhost kernel: [ 113.974258] usb 4-1: usb suspend Jul 8 11:38:05 localhost kernel: [ 113.974261] usb 1-6: usb suspend Jul 8 11:38:05 localhost kernel: [ 113.974290] usb 4-2: usb suspend Jul 8 11:38:05 localhost kernel: [ 113.984108] usb 1-1: usb suspend Jul 8 11:38:05 localhost kernel: [ 113.986800] hub 4-0:1.0: hub_suspend Jul 8 11:38:05 localhost kernel: [ 113.986806] usb usb4: bus suspend Jul 8 11:38:05 localhost kernel: [ 113.986809] usb usb4: suspend_rh Jul 8 11:38:05 localhost kernel: [ 113.996731] hub 1-0:1.0: hub_suspend Jul 8 11:38:05 localhost kernel: [ 113.996736] usb usb1: bus suspend Jul 8 11:38:05 localhost kernel: [ 113.996738] ehci_hcd 0000:00:1a.7: suspend root hub Jul 8 11:38:05 localhost kernel: [ 114.127118] sd 0:0:0:0: [sda] Synchronizing SCSI cache Jul 8 11:38:05 localhost kernel: [ 114.165462] sd 0:0:0:0: [sda] Stopping disk Jul 8 11:38:05 localhost kernel: [ 114.203602] ehci_hcd 0000:00:1d.7: PCI INT D disabled Jul 8 11:38:05 localhost kernel: [ 114.203606] uhci_hcd 0000:00:1d.2: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203612] uhci_hcd 0000:00:1d.2: PCI INT C disabled Jul 8 11:38:05 localhost kernel: [ 114.203614] uhci_hcd 0000:00:1d.1: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203620] uhci_hcd 0000:00:1d.1: PCI INT B disabled Jul 8 11:38:05 localhost kernel: [ 114.203623] uhci_hcd 0000:00:1d.0: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203629] uhci_hcd 0000:00:1d.0: PCI INT A disabled Jul 8 11:38:05 localhost kernel: [ 114.203720] ehci_hcd 0000:00:1a.7: PCI INT D disabled Jul 8 11:38:05 localhost kernel: [ 114.203722] uhci_hcd 0000:00:1a.2: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203725] uhci_hcd 0000:00:1a.1: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203729] uhci_hcd 0000:00:1a.2: PCI INT C disabled Jul 8 11:38:05 localhost kernel: [ 114.203732] uhci_hcd 0000:00:1a.1: PCI INT B disabled Jul 8 11:38:05 localhost kernel: [ 114.203733] uhci_hcd 0000:00:1a.0: uhci_pci_suspend Jul 8 11:38:05 localhost kernel: [ 114.203741] uhci_hcd 0000:00:1a.0: PCI INT A disabled Jul 8 11:38:05 localhost kernel: [ 114.203761] ACPI handle has no context! Jul 8 11:38:05 localhost kernel: [ 114.210047] ACPI handle has no context! Jul 8 11:38:05 localhost kernel: [ 114.216688] i915 0000:00:02.0: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.298986] e1000e 0000:00:19.0: PCI INT A disabled Jul 8 11:38:05 localhost kernel: [ 114.298993] e1000e 0000:00:19.0: PME# enabled Jul 8 11:38:05 localhost kernel: [ 114.298998] e1000e 0000:00:19.0: wake-up capability enabled by ACPI Jul 8 11:38:05 localhost kernel: [ 114.307223] HDA Intel 0000:00:1b.0: PCI INT B disabled Jul 8 11:38:05 localhost kernel: [ 114.563355] PM: suspend of devices complete after 589.304 msecs Jul 8 11:38:05 localhost kernel: [ 114.563846] ehci_hcd 0000:00:1d.7: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.576673] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.576676] ehci_hcd 0000:00:1d.7: --> PCI D3hot Jul 8 11:38:05 localhost kernel: [ 114.576704] uhci_hcd 0000:00:1d.2: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.576706] uhci_hcd 0000:00:1d.2: --> PCI D0 Jul 8 11:38:05 localhost kernel: [ 114.576734] uhci_hcd 0000:00:1d.1: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.576735] uhci_hcd 0000:00:1d.1: --> PCI D0 Jul 8 11:38:05 localhost kernel: [ 114.576763] uhci_hcd 0000:00:1d.0: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.576768] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.576769] uhci_hcd 0000:00:1d.0: --> PCI D3hot Jul 8 11:38:05 localhost kernel: [ 114.576804] ehci_hcd 0000:00:1a.7: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.590005] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.590008] ehci_hcd 0000:00:1a.7: --> PCI D3hot Jul 8 11:38:05 localhost kernel: [ 114.590035] uhci_hcd 0000:00:1a.2: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.590040] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.590042] uhci_hcd 0000:00:1a.2: --> PCI D3hot Jul 8 11:38:05 localhost kernel: [ 114.590069] uhci_hcd 0000:00:1a.1: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.590071] uhci_hcd 0000:00:1a.1: --> PCI D0 Jul 8 11:38:05 localhost kernel: [ 114.590098] uhci_hcd 0000:00:1a.0: wakeup: 0 Jul 8 11:38:05 localhost kernel: [ 114.606674] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D3 Jul 8 11:38:05 localhost kernel: [ 114.606675] uhci_hcd 0000:00:1a.0: --> PCI D3hot Jul 8 11:38:05 localhost kernel: [ 114.606746] PM: late suspend of devices complete after 43.388 msecs Jul 8 11:38:05 localhost kernel: [ 114.607058] ACPI: Preparing to enter system sleep state S3 Jul 8 11:38:05 localhost kernel: [ 114.740037] PM: Saving platform NVS memory Jul 8 11:38:05 localhost kernel: [ 114.742330] Disabling non-boot CPUs ... Jul 8 11:38:05 localhost kernel: [ 114.743621] CPU 1 is now offline Jul 8 11:38:05 localhost kernel: [ 114.743919] Extended CMOS year: 2000 Jul 8 11:38:05 localhost kernel: [ 114.743919] ACPI: Low-level resume complete Jul 8 11:38:05 localhost kernel: [ 114.743919] PM: Restoring platform NVS memory Jul 8 11:38:05 localhost kernel: [ 114.743919] Extended CMOS year: 2000 Jul 8 11:38:05 localhost kernel: [ 114.743919] Enabling non-boot CPUs ... Jul 8 11:38:05 localhost kernel: [ 114.750712] Booting Node 0 Processor 1 APIC 0x1 Jul 8 11:38:05 localhost kernel: [ 114.750713] smpboot cpu 1: start_ip = 99000 Jul 8 11:38:05 localhost kernel: [ 114.743605] Disabled fast string operations Jul 8 11:38:05 localhost kernel: [ 114.843573] NMI watchdog enabled, takes one hw-pmu counter. Jul 8 11:38:05 localhost kernel: [ 114.846668] Switched to NOHz mode on CPU #1 Jul 8 11:38:05 localhost kernel: [ 114.850039] CPU1 is up Jul 8 11:38:05 localhost kernel: [ 114.851293] ACPI: Waking up from system sleep state S3 Jul 8 11:38:05 localhost kernel: [ 115.256746] agpgart-intel 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.256759] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) Jul 8 11:38:05 localhost kernel: [ 115.256770] i915 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.256782] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) Jul 8 11:38:05 localhost kernel: [ 115.256787] pci 0000:00:02.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.256793] pci 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) Jul 8 11:38:05 localhost kernel: [ 115.256802] pci 0000:00:03.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006) Jul 8 11:38:05 localhost kernel: [ 115.256808] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.256814] serial 0000:00:03.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) Jul 8 11:38:05 localhost kernel: [ 115.256827] serial 0000:00:03.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.256872] e1000e 0000:00:19.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273341] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273344] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273370] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273380] uhci_hcd 0000:00:1a.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273383] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273385] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273412] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273422] uhci_hcd 0000:00:1a.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273425] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273427] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273453] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273463] uhci_hcd 0000:00:1a.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273465] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273467] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273501] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) Jul 8 11:38:05 localhost kernel: [ 115.273516] ehci_hcd 0000:00:1a.7: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273519] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273522] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273558] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) Jul 8 11:38:05 localhost kernel: [ 115.273573] HDA Intel 0000:00:1b.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273596] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc51bc41) Jul 8 11:38:05 localhost kernel: [ 115.273601] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xbc30bc20) Jul 8 11:38:05 localhost kernel: [ 115.273605] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x9090) Jul 8 11:38:05 localhost kernel: [ 115.273616] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) Jul 8 11:38:05 localhost kernel: [ 115.273645] pcieport 0000:00:1c.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273671] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0xbc11bc01) Jul 8 11:38:05 localhost kernel: [ 115.273676] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x8080) Jul 8 11:38:05 localhost kernel: [ 115.273687] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) Jul 8 11:38:05 localhost kernel: [ 115.273716] pcieport 0000:00:1c.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273751] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) Jul 8 11:38:05 localhost kernel: [ 115.273780] pcieport 0000:00:1c.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273815] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) Jul 8 11:38:05 localhost kernel: [ 115.273844] pcieport 0000:00:1c.4: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273850] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273852] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273878] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273888] uhci_hcd 0000:00:1d.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273890] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273892] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.273919] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273929] uhci_hcd 0000:00:1d.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.273956] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) Jul 8 11:38:05 localhost kernel: [ 115.273966] uhci_hcd 0000:00:1d.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274000] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) Jul 8 11:38:05 localhost kernel: [ 115.274015] ehci_hcd 0000:00:1d.7: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274018] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.274021] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.274057] pci 0000:00:1e.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274102] pci 0000:00:1f.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274137] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) Jul 8 11:38:05 localhost kernel: [ 115.274166] ahci 0000:00:1f.2: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274193] i801_smbus 0000:00:1f.3: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274288] pci 0000:03:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.274336] yenta_cardbus 0000:15:00.0: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.286677] firewire_ohci 0000:15:00.1: BAR 0: set to [mem 0xf4801000-0xf48017ff] (PCI address [0xf4801000-0xf48017ff]) Jul 8 11:38:05 localhost kernel: [ 115.286709] firewire_ohci 0000:15:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) Jul 8 11:38:05 localhost kernel: [ 115.286716] firewire_ohci 0000:15:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) Jul 8 11:38:05 localhost kernel: [ 115.286729] firewire_ohci 0000:15:00.1: calling quirk_cardbus_legacy+0x0/0x30 Jul 8 11:38:05 localhost kernel: [ 115.287028] PM: early resume of devices complete after 30.348 msecs Jul 8 11:38:05 localhost kernel: [ 115.287180] i915 0000:00:02.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.287184] e1000e 0000:00:19.0: wake-up capability disabled by ACPI Jul 8 11:38:05 localhost kernel: [ 115.287185] i915 0000:00:02.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.287189] e1000e 0000:00:19.0: PME# disabled Jul 8 11:38:05 localhost kernel: [ 115.287190] i915 0000:00:02.0: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.287259] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X Jul 8 11:38:05 localhost kernel: [ 115.289342] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289344] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289350] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Jul 8 11:38:05 localhost kernel: [ 115.289353] uhci_hcd 0000:00:1a.0: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289357] uhci_hcd 0000:00:1a.0: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289360] uhci_hcd 0000:00:1a.0: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289363] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x2f00 Jul 8 11:38:05 localhost kernel: [ 115.289365] uhci_hcd 0000:00:1a.0: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289387] usb usb3: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289399] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Jul 8 11:38:05 localhost kernel: [ 115.289402] uhci_hcd 0000:00:1a.1: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289406] uhci_hcd 0000:00:1a.1: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289409] uhci_hcd 0000:00:1a.1: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289411] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x2000 Jul 8 11:38:05 localhost kernel: [ 115.289413] uhci_hcd 0000:00:1a.1: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289434] usb usb4: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289444] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289446] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289449] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Jul 8 11:38:05 localhost kernel: [ 115.289452] uhci_hcd 0000:00:1a.2: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289455] uhci_hcd 0000:00:1a.2: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289458] uhci_hcd 0000:00:1a.2: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289461] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x2000 Jul 8 11:38:05 localhost kernel: [ 115.289462] uhci_hcd 0000:00:1a.2: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289483] usb usb5: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289494] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289498] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289503] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 Jul 8 11:38:05 localhost kernel: [ 115.289505] ehci_hcd 0000:00:1a.7: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289509] ehci_hcd 0000:00:1a.7: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289556] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:38:05 localhost kernel: [ 115.289559] HDA Intel 0000:00:1b.0: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289563] HDA Intel 0000:00:1b.0: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289598] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X Jul 8 11:38:05 localhost kernel: [ 115.289736] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289738] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289768] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 8 11:38:05 localhost kernel: [ 115.289771] uhci_hcd 0000:00:1d.0: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289774] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289777] uhci_hcd 0000:00:1d.0: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289780] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2f00 Jul 8 11:38:05 localhost kernel: [ 115.289781] uhci_hcd 0000:00:1d.0: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289802] usb usb6: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289844] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 8 11:38:05 localhost kernel: [ 115.289847] uhci_hcd 0000:00:1d.1: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289851] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289853] uhci_hcd 0000:00:1d.1: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289856] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 Jul 8 11:38:05 localhost kernel: [ 115.289857] uhci_hcd 0000:00:1d.1: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289877] usb usb7: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289888] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Jul 8 11:38:05 localhost kernel: [ 115.289891] uhci_hcd 0000:00:1d.2: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289895] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.289897] uhci_hcd 0000:00:1d.2: uhci_pci_resume Jul 8 11:38:05 localhost kernel: [ 115.289900] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 Jul 8 11:38:05 localhost kernel: [ 115.289901] uhci_hcd 0000:00:1d.2: Performing full reset Jul 8 11:38:05 localhost kernel: [ 115.289922] usb usb8: root hub lost power or was reset Jul 8 11:38:05 localhost kernel: [ 115.289933] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289936] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 Jul 8 11:38:05 localhost kernel: [ 115.289941] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Jul 8 11:38:05 localhost kernel: [ 115.289944] ehci_hcd 0000:00:1d.7: enabling bus mastering Jul 8 11:38:05 localhost kernel: [ 115.289948] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.290003] pci 0000:00:1e.0: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.290015] ahci 0000:00:1f.2: setting latency timer to 64 Jul 8 11:38:05 localhost kernel: [ 115.290117] sd 0:0:0:0: [sda] Starting disk Jul 8 11:38:05 localhost kernel: [ 115.290148] usb usb1: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290151] ehci_hcd 0000:00:1a.7: resume root hub Jul 8 11:38:05 localhost kernel: [ 115.290186] usb usb2: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290188] ehci_hcd 0000:00:1d.7: resume root hub Jul 8 11:38:05 localhost kernel: [ 115.290389] usb usb3: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290390] usb usb3: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.290599] usb usb4: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290600] usb usb4: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.290813] usb usb5: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290815] usb usb5: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.290994] usb usb6: usb resume Jul 8 11:38:05 localhost kernel: [ 115.290995] usb usb6: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.291142] usb usb7: usb resume Jul 8 11:38:05 localhost kernel: [ 115.291144] usb usb7: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.291204] usb usb8: usb resume Jul 8 11:38:05 localhost kernel: [ 115.291205] usb usb8: wakeup_rh Jul 8 11:38:05 localhost kernel: [ 115.303373] hub 3-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303375] hub 3-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303383] hub 4-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303384] hub 4-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303388] hub 5-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303389] hub 5-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303393] hub 6-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303394] hub 6-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303398] hub 7-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303399] hub 7-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303402] hub 8-0:1.0: hub_reset_resume Jul 8 11:38:05 localhost kernel: [ 115.303404] hub 8-0:1.0: trying to enable port power on non-switchable hub Jul 8 11:38:05 localhost kernel: [ 115.303516] legacy_resume(): pnp_bus_resume+0x0/0x70 returns -19 Jul 8 11:38:05 localhost kernel: [ 115.303518] PM: Device 00:0a failed to resume: error -19 Jul 8 11:38:05 localhost kernel: [ 115.305847] Extended CMOS year: 2000 Jul 8 11:38:05 localhost kernel: [ 115.316695] hub 2-0:1.0: hub_resume Jul 8 11:38:05 localhost kernel: [ 115.350189] firewire_core: skipped bus generations, destroying all nodes Jul 8 11:38:05 localhost kernel: [ 115.406789] uhci_hcd 0000:00:1a.1: port 1 portsc 008a,00 Jul 8 11:38:05 localhost kernel: [ 115.406792] hub 4-0:1.0: port 1: status 0100 change 0003 Jul 8 11:38:05 localhost kernel: [ 115.406812] uhci_hcd 0000:00:1a.1: port 2 portsc 008a,00 Jul 8 11:38:05 localhost kernel: [ 115.406814] hub 4-0:1.0: port 2: status 0100 change 0003 Jul 8 11:38:05 localhost kernel: [ 115.420307] ehci_hcd 0000:00:1a.7: port 4 full speed --> companion Jul 8 11:38:05 localhost kernel: [ 115.420310] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003801 0 ACK POWER OWNER sig=j CONNECT Jul 8 11:38:05 localhost kernel: [ 115.420555] ehci_hcd 0000:00:1a.7: port 3 full speed --> companion Jul 8 11:38:05 localhost kernel: [ 115.420558] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003801 0 ACK POWER OWNER sig=j CONNECT Jul 8 11:38:05 localhost kernel: [ 115.433394] hub 1-0:1.0: hub_resume Jul 8 11:38:05 localhost kernel: [ 115.433402] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001002 0 ACK POWER sig=se0 CSC Jul 8 11:38:05 localhost kernel: [ 115.433408] hub 1-0:1.0: port 1: status 0100 change 0001 Jul 8 11:38:05 localhost kernel: [ 115.433420] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC Jul 8 11:38:05 localhost kernel: [ 115.433430] ehci_hcd 0000:00:1a.7: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC Jul 8 11:38:05 localhost kernel: [ 115.433443] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:38:05 localhost kernel: [ 115.433446] hub 1-0:1.0: port 6: status 0501 change 0001 Jul 8 11:38:05 localhost kernel: [ 115.536786] hub 1-0:1.0: port 1 status 0000.0100 after resume, -19 Jul 8 11:38:05 localhost kernel: [ 115.536789] usb 1-6: finish reset-resume Jul 8 11:38:05 localhost kernel: [ 115.536792] usb 1-1: can't resume, status -19 Jul 8 11:38:05 localhost kernel: [ 115.536794] hub 1-0:1.0: logical disconnect on port 1 Jul 8 11:38:05 localhost kernel: [ 115.536814] uhci_hcd 0000:00:1a.1: port 2 portsc 0093,00 Jul 8 11:38:05 localhost kernel: [ 115.536823] usb 4-2: finish reset-resume Jul 8 11:38:05 localhost kernel: [ 115.536842] uhci_hcd 0000:00:1a.1: port 1 portsc 0093,00 Jul 8 11:38:05 localhost kernel: [ 115.536850] usb 4-1: finish reset-resume Jul 8 11:38:05 localhost kernel: [ 115.590307] ehci_hcd 0000:00:1a.7: port 6 high speed Jul 8 11:38:05 localhost kernel: [ 115.590310] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:38:05 localhost kernel: [ 115.610071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 8 11:38:05 localhost kernel: [ 115.643399] usb 1-6: reset high speed USB device number 4 using ehci_hcd Jul 8 11:38:05 localhost kernel: [ 115.691341] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded Jul 8 11:38:05 localhost kernel: [ 115.692164] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded Jul 8 11:38:05 localhost kernel: [ 115.697056] ehci_hcd 0000:00:1a.7: port 6 high speed Jul 8 11:38:05 localhost kernel: [ 115.697059] ehci_hcd 0000:00:1a.7: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:38:05 localhost kernel: [ 115.702103] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded Jul 8 11:38:05 localhost kernel: [ 115.702955] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded Jul 8 11:38:05 localhost kernel: [ 115.706700] ata2.00: configured for UDMA/133 Jul 8 11:38:05 localhost kernel: [ 115.850090] firewire_core: rediscovered device fw0 Jul 8 11:38:05 localhost kernel: [ 115.873424] usb 4-2: reset full speed USB device number 3 using uhci_hcd Jul 8 11:38:05 localhost kernel: [ 116.106777] usb 4-1: reset full speed USB device number 2 using uhci_hcd Jul 8 11:38:05 localhost kernel: [ 116.233395] usb 4-1: ep0 maxpacket = 8 Jul 8 11:38:05 localhost kernel: [ 116.346755] usb usb3: suspend_rh (auto-stop) Jul 8 11:38:05 localhost kernel: [ 116.346789] usb usb6: suspend_rh (auto-stop) Jul 8 11:38:05 localhost kernel: [ 116.347266] usb usb7: suspend_rh (auto-stop) Jul 8 11:38:05 localhost kernel: [ 116.347287] usb usb8: suspend_rh (auto-stop) Jul 8 11:38:05 localhost kernel: [ 116.347307] usb usb5: suspend_rh (auto-stop) Jul 8 11:38:05 localhost kernel: [ 116.356782] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Jul 8 11:38:05 localhost kernel: [ 116.556478] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded Jul 8 11:38:05 localhost kernel: [ 116.556483] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Jul 8 11:38:05 localhost kernel: [ 116.556486] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out Jul 8 11:38:05 localhost kernel: [ 116.561244] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded Jul 8 11:38:05 localhost kernel: [ 116.561248] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out Jul 8 11:38:05 localhost kernel: [ 116.561251] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out Jul 8 11:38:05 localhost kernel: [ 116.563166] ata1.00: configured for UDMA/100 Jul 8 11:38:05 localhost kernel: [ 116.721166] ath: Unable to configure filter on invalid state Jul 8 11:38:05 localhost kernel: [ 116.721183] PM: resume of devices complete after 1434.027 msecs Jul 8 11:38:05 localhost kernel: [ 116.721447] PM: Finishing wakeup. Jul 8 11:38:05 localhost kernel: [ 116.721448] Restarting tasks ... Jul 8 11:38:05 localhost kernel: [ 116.721499] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721504] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721506] hub 8-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721509] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721511] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721514] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 Jul 8 11:38:05 localhost kernel: [ 116.721516] hub 4-0:1.0: state 7 ports 2 chg 0006 evt 0006 Jul 8 11:38:05 localhost kernel: [ 116.721526] hub 4-0:1.0: port 1, status 0103, change 0000, 12 Mb/s Jul 8 11:38:05 localhost kernel: [ 116.721533] hub 4-0:1.0: port 2, status 0103, change 0000, 12 Mb/s Jul 8 11:38:05 localhost kernel: [ 116.721535] hub 1-0:1.0: state 7 ports 6 chg 0042 evt 0002 Jul 8 11:38:05 localhost kernel: [ 116.721542] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT Jul 8 11:38:05 localhost kernel: [ 116.721548] hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s Jul 8 11:38:05 localhost kernel: [ 116.721550] usb 1-1: USB disconnect, device number 5 Jul 8 11:38:05 localhost kernel: [ 116.721552] usb 1-1: unregistering device Jul 8 11:38:05 localhost kernel: [ 116.721554] usb 1-1: unregistering interface 1-1:1.0 Jul 8 11:38:05 localhost kernel: [ 116.721569] done. Jul 8 11:38:05 localhost kernel: [ 116.728093] video LNXVIDEO:00: Restoring backlight state Jul 8 11:38:05 localhost kernel: [ 116.756801] usb 1-1: ath9k_htc: USB layer deinitialized Jul 8 11:38:05 localhost kernel: [ 116.756821] usb 1-1: usb_disable_device nuking all URBs Jul 8 11:38:05 localhost kernel: [ 116.876679] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501 Jul 8 11:38:06 localhost kernel: [ 116.930307] ehci_hcd 0000:00:1a.7: port 1 high speed Jul 8 11:38:06 localhost kernel: [ 116.930311] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:38:06 localhost kernel: [ 116.983345] usb 1-1: new high speed USB device number 6 using ehci_hcd Jul 8 11:38:06 localhost kernel: [ 117.046931] ehci_hcd 0000:00:1a.7: port 1 high speed Jul 8 11:38:06 localhost kernel: [ 117.046935] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT Jul 8 11:38:06 localhost kernel: [ 117.054212] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx Jul 8 11:38:06 localhost kernel: [ 117.054215] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO Jul 8 11:38:06 localhost kernel: [ 117.130584] usb 1-1: default language 0x0409 Jul 8 11:38:06 localhost kernel: [ 117.130960] usb 1-1: udev 6, busnum 1, minor = 5 Jul 8 11:38:06 localhost kernel: [ 117.130962] usb 1-1: New USB device found, idVendor=0cf3, idProduct=9271 Jul 8 11:38:06 localhost kernel: [ 117.130964] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48 Jul 8 11:38:06 localhost kernel: [ 117.130966] usb 1-1: Product: USB2.0 WLAN Jul 8 11:38:06 localhost kernel: [ 117.130967] usb 1-1: Manufacturer: ATHEROS Jul 8 11:38:06 localhost kernel: [ 117.130969] usb 1-1: SerialNumber: 12345 Jul 8 11:38:06 localhost kernel: [ 117.131051] usb 1-1: usb_probe_device Jul 8 11:38:06 localhost kernel: [ 117.131054] usb 1-1: configuration #1 chosen from 1 choice Jul 8 11:38:06 localhost kernel: [ 117.131400] usb 1-1: adding 1-1:1.0 (config #1, interface 0) Jul 8 11:38:06 localhost kernel: [ 117.131422] ath9k_htc 1-1:1.0: usb_probe_interface Jul 8 11:38:06 localhost kernel: [ 117.131424] ath9k_htc 1-1:1.0: usb_probe_interface - got id Jul 8 11:38:06 localhost kernel: [ 117.417092] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272 Jul 8 11:38:06 localhost kernel: [ 117.652083] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits Jul 8 11:38:06 localhost kernel: [ 117.840694] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3 Jul 8 11:38:06 localhost kernel: [ 117.840696] ath: EEPROM regdomain: 0x0 Jul 8 11:38:06 localhost kernel: [ 117.840697] ath: EEPROM indicates default country code should be used Jul 8 11:38:06 localhost kernel: [ 117.840698] ath: doing EEPROM country->regdmn map search Jul 8 11:38:06 localhost kernel: [ 117.840701] ath: country maps to regdmn code: 0x3a Jul 8 11:38:06 localhost kernel: [ 117.840702] ath: Country alpha2 being used: US Jul 8 11:38:06 localhost kernel: [ 117.840703] ath: Regpair used: 0x3a Jul 8 11:38:06 localhost kernel: [ 117.841316] ieee80211 phy1: Atheros AR9271 Rev:1 Jul 8 11:38:06 localhost kernel: [ 117.842085] Registered led device: ath9k_htc-phy1 Jul 8 11:38:06 localhost kernel: [ 117.842087] usb 1-1: ath9k_htc: USB layer initialized Jul 8 11:38:06 localhost kernel: [ 117.842152] drivers/usb/core/inode.c: creating file '006' Jul 8 11:38:06 localhost kernel: [ 117.842175] hub 1-0:1.0: port 6, status 0503, change 0000, 480 Mb/s Jul 8 11:38:09 localhost kernel: [ 120.340077] hub 2-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340088] usb usb2: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340091] ehci_hcd 0000:00:1d.7: suspend root hub Jul 8 11:38:09 localhost kernel: [ 120.340119] hub 3-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340123] usb usb3: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340126] usb usb3: suspend_rh Jul 8 11:38:09 localhost kernel: [ 120.340145] hub 8-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340149] usb usb8: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340151] usb usb8: suspend_rh Jul 8 11:38:09 localhost kernel: [ 120.340169] hub 7-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340172] usb usb7: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340175] usb usb7: suspend_rh Jul 8 11:38:09 localhost kernel: [ 120.340195] hub 5-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340197] usb usb5: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340198] usb usb5: suspend_rh Jul 8 11:38:09 localhost kernel: [ 120.340213] hub 6-0:1.0: hub_suspend Jul 8 11:38:09 localhost kernel: [ 120.340216] usb usb6: bus auto-suspend Jul 8 11:38:09 localhost kernel: [ 120.340217] usb usb6: suspend_rh Jul 8 11:38:12 localhost kernel: [ 123.130124] e1000e: eth0 NIC Link is Down Jul 8 11:38:13 localhost kernel: [ 124.820902] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None Jul 8 11:38:13 localhost kernel: [ 124.820906] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
