The USB high speed device must support the TEST_MODE, but the driver
didn't support it. When we sent the SET_FEATURE for TEST_MODE to
the driver, the request was successful, but the module didn't enter
the TEST_MODE.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
drivers/usb/gadget/r8a66597-udc.c | 14 +++++++++++++-
1 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c
index db7a6de..fb707bb 100644
--- a/drivers/usb/gadget/r8a66597-udc.c
+++ b/drivers/usb/gadget/r8a66597-udc.c
@@ -618,6 +618,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
{
if (r8a66597->pdata->on_chip) {
r8a66597_bset(r8a66597, SCKE, SYSCFG0);
+ r8a66597_bclr(r8a66597, UTST, TESTMODE);
/* disable interrupts */
r8a66597_write(r8a66597, 0, INTENB0);
@@ -635,6 +636,7 @@ static void disable_controller(struct r8a66597 *r8a66597)
r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
} else {
+ r8a66597_bclr(r8a66597, UTST, TESTMODE);
r8a66597_bclr(r8a66597, SCKE, SYSCFG0);
udelay(1);
r8a66597_bclr(r8a66597, PLLC, SYSCFG0);
@@ -1002,7 +1004,17 @@ static void set_feature(struct r8a66597 *r8a66597, struct usb_ctrlrequest *ctrl)
switch (ctrl->bRequestType & USB_RECIP_MASK) {
case USB_RECIP_DEVICE:
- control_end(r8a66597, 1);
+ switch (le16_to_cpu(ctrl->wValue)) {
+ case USB_DEVICE_TEST_MODE:
+ control_end(r8a66597, 1);
+ mdelay(3);
+ r8a66597_bset(r8a66597, le16_to_cpu(ctrl->wIndex >> 8),
+ TESTMODE);
+ break;
+ default:
+ pipe_stall(r8a66597, 0);
+ break;
+ }
break;
case USB_RECIP_INTERFACE:
control_end(r8a66597, 1);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
