None of pxa25x devices use udc_command() for UDC functionality.
Stop calling this callback from pxa25x_udc code.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
---
drivers/usb/gadget/pxa25x_udc.c | 8 ++------
1 files changed, 2 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 6f543c7..aa34698 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -144,8 +144,6 @@ static void pullup_off(void)
if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
- else if (mach->udc_command)
- mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
static void pullup_on(void)
@@ -155,8 +153,6 @@ static void pullup_on(void)
if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
- else if (mach->udc_command)
- mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
}
static void pio_irq_enable(int bEndpointAddress)
@@ -984,7 +980,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup))
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
@@ -2241,7 +2237,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup))
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
