Linux USB Users

• Thread Index

• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 13/16] mfd: omap-usb-host: Get rid of unnecessary spinlock
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 10/16] mfd: omap-usb-host: Intialize all available ports
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 09/16] mfd: omap-usb-host: override number of ports from platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 08/16] mfd: omap-usb-host: know about number of ports from revision register
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Thoughts about bandwidth management
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 14/16] mfd: omap-usb-host: Support an auxiliary clock per port
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 13/16] mfd: omap-usb-host: Get rid of unnecessary spinlock
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 11/16] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 10/16] mfd: omap-usb-host: Intialize all available ports
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: ftdi_sio: VID and PID for Newport Agilis motor driver
  • From: Martin Teichmann <lkb.teichmann@xxxxxxxxx>
• Re: [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] input: usb: hid: Add quirk for Freescale i.MX28 ROM recovery
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] hid: usbhid: add quirk for SB arena headset v2
  • From: Chris J Arges <chris.j.arges@xxxxxxxxxxxxx>
• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/1] USB: core: Free the allocated memory before exiting on error
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/16] mfd: omap-usb-host: override number of ports from platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 08/16] mfd: omap-usb-host: know about number of ports from revision register
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: fix switch off blocked in u_serial
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: ftdi_sio: VID and PID for Newport Agilis motor driver
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 05/16] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 04/16] mfd: omap-usb-tll: Move port clock handling out of runtime ops
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 1/7] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 0/7] support other fsl SoCs with usbmisc + small fixes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 4/7] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 3/7] usb: chipidea: usbmisc: fix a potential race condition
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 2/7] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v3 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 15/16] ARM: OMAP4: omap4panda: Don't enable USB PHY clock from board
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 14/16] mfd: omap-usb-host: Support an auxiliary clock per port
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 13/16] mfd: omap-usb-host: Get rid of unnecessary spinlock
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 11/16] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] tty: don't dead while flushing workqueue
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/16] mfd: omap-usb-host: Intialize all available ports
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 09/16] mfd: omap-usb-host: override number of ports from platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 08/16] mfd: omap-usb-host: know about number of ports from revision register
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCHv0 3/5] usb: chipidea: convert debug entries in sysfs to debugfs
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH v1] USB: musb: defer probe if transceiver is not ready
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCHv0 5/5] usb: chipidea: move debug files creation/removal to the core
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCHv0 4/5] usb: chipidea: move role to debugfs
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCHv0 2/5] usb: chipidea: replace interrupt accounting with tracepoints
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCHv0 1/5] usb: chipidea: convert events to tracepoints
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCHv0 0/5] usb: chipidea: clean up debuggery
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 07/16] mfd: omap_usb_host: Avoid creating copy of platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 06/16] mfd: omap-usb-host: cleanup clock management code
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] USB: musb: defer probe if transceiver is not ready
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: [PATCH] USB: musb: defer probe if transceiver is not ready
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 05/16] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 04/16] mfd: omap-usb-tll: Move port clock handling out of runtime ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH] USB: musb: defer probe if transceiver is not ready
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH] tty: don't dead while flushing workqueue
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 03/16] mfd: omap-usb-tll: introduce and use mode_needs_tll()
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 05/16] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 04/16] mfd: omap-usb-tll: Move port clock handling out of runtime ops
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 03/16] mfd: omap-usb-tll: introduce and use mode_needs_tll()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 01/16] mfd: omap-usb-tll: Avoid creating copy of platform data
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Felipe Balbi <balbi@xxxxxx>
• ftdi_sio: VID and PID for Newport Agilis motor driver
  • From: Martin Teichmann <lkb.teichmann@xxxxxxxxx>
• [PATCH 1/1] asix: use ramdom hw addr if the one read is not valid
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 06/16] usb/gadget: convert source sink and loopback to new function interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH v6] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• [PATCH 1/1] USB: core: Free the allocated memory before exiting on error
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH v2 4/7] usb: chipidea: create the gadget at ci_hdrc_probe even at host role
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [RFC] usb: add 'usb_get_intf()' call into the probe methods of drivers for usb interfaces.
  • From: harvey yang <harvey.huawei.yang@xxxxxxxxx>
• Re: kmemleak report on isp1763 and sierra MC8705
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: usb to parallel cable not recognized
  • From: Peter Stuge <peter@xxxxxxxx>
• usb to parallel cable not recognized
  • From: Rolf Leggewie <foss@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/16] usb/gadget: convert source sink and loopback to new function interface
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 15/16] usb/gadget: nokia: use function framework for ACM
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 159/493] usb: remove use of __devinit
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: autodetect USB MTP device characteristics without libusb_open()
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [patch] USB: usbtest: prevent a divide by zero bug
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 15/16] usb/gadget: nokia: use function framework for ACM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC] usb: add 'usb_get_intf()' call into the probe methods of drivers for usb interfaces.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 06/16] usb/gadget: convert source sink and loopback to new function interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 05/16] usb/gadget: add some infracture to register/unregister functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 05/16] usb/gadget: add some infracture to register/unregister functions
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH 09/16] usb/gadget: convert u_serial into a module
  • From: Michal Nazarewicz <mina86@xxxxxxxxxx>
• Re: [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: autodetect USB MTP device characteristics without libusb_open()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/7] usb: chipidea: create the gadget at ci_hdrc_probe even at host role
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 119/493] usb: remove use of __devexit_p
  • From: Peter Korsgaard <jacmet@xxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 15/16] usb/gadget: nokia: use function framework for ACM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 14/16] usb/gadget: multi: use function framework for ACM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 13/16] usb/gadget: cdc2: use function framework for ACM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 12/16] usb/gadget: acm_ms: use function framework for ACM
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 11/16] usb/gadget: convert f_acm to new function interface with backwards compatibility
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 09/16] usb/gadget: convert u_serial into a module
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3] usb/dummy_hcd: fix enumeration with g_multi
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH 06/16] usb/gadget: convert source sink and loopback to new function interface
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 05/16] usb/gadget: add some infracture to register/unregister functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: gadget: remove last pieces of file_storage gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: remove last pieces of file_storage gadget
  • From: Michal Nazarewicz <mpn@xxxxxxxxxx>
• Re: [PATCH] usb/dummy_hcd: use one type of endpoint naming
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 4/7] usb: chipidea: create the gadget at ci_hdrc_probe even at host role
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: remove last pieces of file_storage gadget
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v5] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 159/493] usb: remove use of __devinit
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 119/493] usb: remove use of __devexit_p
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v5] can: kvaser_usb: Add support for Kvaser CAN/USB devices
  • From: Olivier Sobrie <olivier@xxxxxxxxx>
• Re: Thoughts about bandwidth management
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 7/7] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Thoughts about bandwidth management
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] UVC: use GFP_ATOMIC under spin lock.
  • From: Cyril Roelandt <tipecaml@xxxxxxxxx>
• Re: Thoughts about bandwidth management
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 431/493] usb: remove use of __devexit
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 371/493] usb: remove use of __devinitconst
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 159/493] usb: remove use of __devinit
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 325/493] usb: remove use of __devinitdata
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 119/493] usb: remove use of __devexit_p
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 159/493] usb: remove use of __devinit
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 119/493] usb: remove use of __devexit_p
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 007/493] usb-core: remove CONFIG_HOTPLUG ifdefs
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 113/493] staging: usbip: remove use of __devexit_p
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 371/493] usb: remove use of __devinitconst
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 431/493] usb: remove use of __devexit
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• [PATCH 325/493] usb: remove use of __devinitdata
  • From: Bill Pemberton <wfp5p@xxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Thoughts about bandwidth management
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] usb: musb: Remove duplicate inclusion of linux/of.h
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH v2 7/7] usb: chipidea: imx: add internal vbus regulator control
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH v2 1/7] Revert "USB: chipidea: add vbus detect for udc"
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 6/7] usb: chipidea: udc: retire the flag CI13_PULLUP_ON_VBUS
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/7] Revert "USB: chipidea: add vbus detect for udc"
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] usb: chipidea: imx: add internal vbus regulator control
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 5/7] usb: chipidea: udc: add pullup/pulldown dp at hw_device_state
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 4/7] usb: chipidea: create the gadget at ci_hdrc_probe even at host role
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 3/7] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 2/7] usb: chipidea: add otg file
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 1/7] Revert "USB: chipidea: add vbus detect for udc"
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [PATCH v2 0/7] dd fully tested id switch and vbus connect detect support for Chipidea
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• [RFC] usb: add 'usb_get_intf()' call into the probe methods of drivers for usb interfaces.
  • From: harvey yang <harvey.huawei.yang@xxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/16] USB: opticon: increase bulk-in size
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: [PATCH 13/16] USB: opticon: increase bulk-in size
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 02/16] USB: opticon: move private urb initialisation to attach
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 16/16] USB: opticon: switch to generic read implementation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 05/16] USB: opticon: remove redundant initialisation
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 01/16] USB: opticon: remove redundant bulk urb fill
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 08/16] USB: opticon: move read-urb deallocation to release
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 06/16] USB: opticon: remove private usb-serial data
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 07/16] USB: opticon: simplify bulk-in discovery in attach
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 04/16] USB: opticon: remove private serial-device data
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 03/16] USB: opticon: use port device for error and debug
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 15/16] USB: opticon: refactor reab-urb processing
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 12/16] USB: opticon: use port as urb context
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 13/16] USB: opticon: increase bulk-in size
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 10/16] USB: opticon: make private data port specific
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 09/16] USB: opticon: remove disconnect
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 14/16] USB: opticon: use usb-serial bulk-in urb
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 11/16] USB: opticon: pass port to get_serial_info
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• [PATCH 00/16] USB: opticon: switch to generic read
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Greg KH <greg@xxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [patch] USB: usbtest: prevent a divide by zero bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [patch] USB: usbtest: prevent a divide by zero bug
  • From: walter harms <wharms@xxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• [patch] USB: usbtest: prevent a divide by zero bug
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: [PATCH 09/10] usb: expose usb port's pm qos flags to user space
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 08/10] usb: add usb port auto power off mechanism
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 10/10] usb: add usb port's pm qos flags request to change NO_POWER_OFF flag
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 09/10] usb: expose usb port's pm qos flags to user space
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 07/10] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 06/10] usb: Add driver/usb/core/(port.c,hub.h) files
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 05/10] usb: Register usb port's acpi power resources
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 04/10] usb: Add "portX/connect_type" attribute to expose usb port's connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 03/10] usb: Create link files between child device and usb port device.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 01/10] USB: Set usb port's DeviceRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 02/10] usb/xhci: set root hub's DeviceRemovable according to usb port connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 0/10] usb: usb port power off mechanism and expose usb port connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Joachim Eastwood <manabian@xxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Andrew Victor <avictor.za@xxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: covici@xxxxxxxxxxxxxx
• Re: [PATCH 00/16] OMAP USB Host cleanup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Patch for clearing PRC bit in PORTSC register at the time of XHCI driver insertion
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• Re: [PATCH] Patch for clearing PRC bit in PORTSC register at the time of XHCI driver insertion
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] usb: chipidea: udc: add force-full-speed option
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Matthieu CASTET <matthieu.castet@xxxxxxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [GIT PATCH] USB fixes for 3.7-rc5
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 7/9] usb: chipidea: udc: add force-full-speed option
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Hard freeze after 'rfkill block bluetooth'
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for USB Host
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for USB Host
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH 4/4] regulator: fixed: Properly use input_supply parameter from device tree
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [RFC 3/3] ARM/AVR32: get rid of serial_at91.h
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 11/14] HID: hiddev: Remove redundant check on unsigned variable
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: covici@xxxxxxxxxxxxxx
• Re: [PATCH] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/14] Modify signed comparisons of unsigned variables
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH 11/14] HID: hiddev: Remove redundant check on unsigned variable
  • From: Tushar Behera <tushar.behera@xxxxxxxxxx>
• [PATCH] usb: dwc3: core: move dwc3_cache_hwparams before dwc3_alloc_event_buffers
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH] Patch for clearing PRC bit in PORTSC register at the time of XHCI driver insertion
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• 'Not enough bandwidth' error when plugging full speed into high speed hud into xHCI host
  • From: Mike Young <mike_young@xxxxxx>
• Re: [PATCH] usb: serial: keyspan.c wrong type causes invalid access
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• [PATCH] usb: serial: keyspan.c wrong type causes invalid access
  • From: Tom Carroll <thomas.carroll@xxxxxxxx>
• Re: [PATCH 4/4] regulator: fixed: Properly use input_supply parameter from device tree
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] regulator: fixed: Properly use input_supply parameter from device tree
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 2/4] ARM: OMAP4: USB: Add pin mux configuration for panda board
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 3/4] ARM/dts: omap4-panda: Add USB Host support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 1/4] ARM: OMAP: usb-host: Device tree support for USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 0/4] Device tree support for OMAP USB Host
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 04/16] mfd: omap-usb-tll: Move port clock handling out of runtime ops
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 02/16] mfd: omap-usb-tll: Clean up clock handling
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 07/16] mfd: omap_usb_host: Avoid creating copy of platform_data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 12/16] ARM: OMAP2+: clock data: Merge utmi_px_gfclk into usb_host_hs_utmi_px_clk
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 15/16] ARM: OMAP4: omap4panda: Don't enable USB PHY clock from board
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 14/16] mfd: omap-usb-host: Support an auxiliary clock per port
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 16/16] ARM: OMAP: omap4panda: Power down the USB PHY and ETH when not in use
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 13/16] mfd: omap-usb-host: Get rid of unnecessary spinlock
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 11/16] mfd: omap-usb-host: Manage HSIC clocks for HSIC mode
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 10/16] mfd: omap-usb-host: Intialize all available ports
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 09/16] mfd: omap-usb-host: override number of ports from platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 08/16] mfd: omap-usb-host: know about number of ports from revision register
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 06/16] mfd: omap-usb-host: cleanup clock management code
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 05/16] mfd: omap-usb-tll: Add OMAP5 revision and HSIC support
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 03/16] mfd: omap-usb-tll: introduce and use mode_needs_tll()
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 01/16] mfd: omap-usb-tll: Avoid creating copy of platform data
  • From: Roger Quadros <rogerq@xxxxxx>
• [PATCH 00/16] OMAP USB Host cleanup
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [PATCH v2 4/7] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 6/7] usb: chipidea: usbmisc: add mx53 support
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 7/7] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 3/7] usb: chipidea: usbmisc: fix a potential race condition
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 1/7] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 5/7] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 0/7] support other fsl SoCs with usbmisc + small fixes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v2 2/7] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Martin Fuzzey <mfuzzey@xxxxxxxxx>
• [RFC PATCH 2/2] usb: amd5536udc: avoid NULL pointer dereference in udc_pci_probe()
  • From: Xi Wang <xi.wang@xxxxxxxxx>
• [RFC PATCH 1/2] usb: amd5536udc: avoid calling dma_pool_create() with NULL dev
  • From: Xi Wang <xi.wang@xxxxxxxxx>
• Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [Resend PATCH V4 1/4] USB: Set usb port's DeviceRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH 1/1] usb: usbip: userspace: remove the port state file when detaching port.
  • From: Harvey Yang <harvey.huawei.yang@xxxxxxxxx>
• Re: [PATCH 2/4] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 1/4] Revert "usb: otg: mxs-phy: Fix mx23 operation"
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] Revert "usb: otg: mxs-phy: Fix mx23 operation"
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] Try #2: Use SCSI read/write(16) with >2TB drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: [RFC PATCH v2 2/6] usb: Add driver/usb/core/port.c file to fill usb port related code.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] usb: Add driver/usb/core/port.c file to fill usb port related code.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [Resend PATCH V4 1/4] USB: Set usb port's DeviceRemovable according acpi information in EHCI
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: 3TB Hard Drive in USB Enclosure Resetting
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Try #2: Use SCSI read/write(16) with >2TB drives
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: 3TB Hard Drive in USB Enclosure Resetting
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] usb: gadget: storage_common: Make fsg_lun_is_open() a function.
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: gadget: storage_common: Drop #ifdefs used for the sake of FSG.
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: gadget: storage_common: Drop #ifdefs used for the sake of FSG.
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• DaVinci MUSB module hang [Was: Re: [PATCH] musb_core: print new line in the driver banner again]
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/6] usb: gadget: Remove File-backed Storage Gadget (g_file_storage).
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: kmemleak report on isp1763 and sierra MC8705
  • From: Johan Hovold <jhovold@xxxxxxxxx>
• Re: USB issue with kernel 3.6
  • From: Piergiorgio Sartor <piergiorgio.sartor@xxxxxxxx>
• Re: Programatic disconnect and reconnect of USB device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/16] usb/gadget: acm_ms: use function framework for ACM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 13/16] usb/gadget: cdc2: use function framework for ACM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 14/16] usb/gadget: multi: use function framework for ACM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 10/16] usb/gadget: add usb_remove_function()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 11/16] usb/gadget: convert f_acm to new function interface with backwards compatibility
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 15/16] usb/gadget: nokia: use function framework for ACM
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 16/16] usb: gadget: move the global the_dev variable to their users
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 04/16] usb/gadget: move loopback's config descriptor out of f_loopback
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 02/16] usb/gadget: provide a wrapper around SourceSink's setup function
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 03/16] usb/gadget: move source sink's config descriptor out of f_sourcesink
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 07/16] usb/gadget: remove empty function in f_acm
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 06/16] usb/gadget: convert source sink and loopback to new function interface
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 09/16] usb/gadget: convert u_serial into a module
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 08/16] usb/gadget: split the three possible function in g_serial into three bind functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 05/16] usb/gadget: add some infracture to register/unregister functions
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 01/16] usb/gadget: composite: don't call driver's unbind() if bind() failed
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• gadget: provide function registration interface, v3
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: kmemleak report on isp1763 and sierra MC8705
  • From: Richard Retanubun <richardretanubun@xxxxxxxxxxxxx>
• [PATCH] usb/dummy_hcd: use one type of endpoint naming
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 9/9] usb: chipidea: udc: configure iso endpoints
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: patch "Revert "USB/host: Cleanup unneccessary irq disable code"" added to usb tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Programatic disconnect and reconnect of USB device
  • From: Graham <graham.harris@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/9] usb: chipidea: ci13xxx-imx: add "dr_mode" property to device tree bindings
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 6/9] usb: chipidea: add PTW and PTS handling
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/9] usb: chipidea: ci13xxx_imx: add 2nd and 3rd clock to support imx5x and newer
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 3/9] usb: chipidea: ci13xxx-imx: create dynamic platformdata
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/9] usb: chipidea: pci: mark platformdata as static and __devinitdata
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 8/9] usb: chipidea: udc: remove unlocked ep_queue which can lead to an race
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 9/9] usb: chipidea: udc: configure iso endpoints
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 7/9] usb: chipidea: udc: add force-full-speed option
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 0/9] chipidea fixes and features
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 5/9] usb: add phy connection by phy-mode
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH] musb_core: print new line in the driver banner again
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] musb_core: print new line in the driver banner again
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] musb_core: print new line in the driver banner again
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: usb phy and usb otg
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: gadget: fix switch off blocked in u_serial
  • From: Linus Walleij <linus.walleij@xxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/6] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 6/6] usb: chipidea: usbmisc: add post handling and errata fix for mx25
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 1/6] usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 0/6] support other fsl SoCs with usbmisc + small fixes
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 4/6] usb: chipidea: usbmisc: add support for ahb, ipg and per clock
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 3/6] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 5/6] usb: chipidea: usbmisc: add mx53 support
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH 2/6] usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH v8 2/2] usb: s3c-hsotg: Adding phy driver support
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v8 1/2] usb: phy: samsung: Introducing usb phy driver for hsotg
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• [PATCH v8 0/2] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH -next v2] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus()
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH] Try #2: Use SCSI read/write(16) with >2TB drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: [PATCH -next v2] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus()
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH -next v2] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: Device detected as Digitalcamera (PTP?) instead of Portable Device (MTP?) - MS_COMP_MTP - WinXP
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [PATCH v7 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
  • From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
• Re: [RFC PATCH v2 2/6] usb: Add driver/usb/core/port.c file to fill usb port related code.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH v2 1/6] usb: Register usb port's acpi power resources
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• usb phy and usb otg
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• Re: [PATCH] Use SCSI read/write(16) with >2TB drives
  • From: Paolo Bonzini <pbonzini@xxxxxxxxxx>
• [PATCH] Use SCSI read/write(16) with >2TB drives
  • From: "Jason J. Herne" <hernejj@xxxxxxxxx>
• Re: [RFC PATCH v2 6/6] usb: add usb port's pm qos flags request to change NO_POWER_OFF flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC PATCH v2 5/6] usb: expose usb port's pm qos flags to user space
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC PATCH v2 4/6] usb: add usb port auto power off mechanism
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC PATCH v2 2/6] usb: Add driver/usb/core/port.c file to fill usb port related code.
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC PATCH v2 1/6] usb: Register usb port's acpi power resources
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] net: cdc_ncm: add Huawei devices
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH -next] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus()
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] usb: chipidea: usbmisc: prepare driver to handle more than one soc
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] net: cdc_ncm: add Huawei devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC PATCH v2 1/6] usb: Register usb port's acpi power resources
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [PATCH 2/4] usb: chipidea: add otg id switch and vbus connect/disconnect detect
  • From: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
• [PATCH -next] usb: gadget: tcm_usb_gadge: fix to return error or 0 in tcm_usbg_drop_nexus()
  • From: Wei Yongjun <weiyj.lk@xxxxxxxxx>
• Re: [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH v2 1/6] usb: Register usb port's acpi power resources
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Sound+USB: deadlock problem
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: otg: twl4030: Change TWL4030_MODULE_* ids to TWL_MODULE_*
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
• Re: Sound+USB: deadlock problem
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: Sound+USB: deadlock problem
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: autodetect USB MTP device characteristics without libusb_open()
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Sound+USB: deadlock problem
  • From: Jiri Slaby <jslaby@xxxxxxx>
• Re: Sound+USB: deadlock problem
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Sound+USB: deadlock problem
  • From: Jiri Slaby <jslaby@xxxxxxx>
• [Resend PATCH V4 3/4] usb: Create link files between child device and usb port device.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH V4 4/4] usb: Add "portX/connect_type" attribute to expose usb port's connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH V4 2/4] usb/xhci: set root hub's DeviceRemovable according to usb port connect type
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH V4 1/4] USB: Set usb port's DeviceRemovable according acpi information in EHCI
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [Resend PATCH V4 0/4] usb: expose DeviceRemovable to user space via sysfs attribute
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 6/6] usb: add usb port's pm qos flags request to change NO_POWER_OFF flag
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 5/6] usb: expose usb port's pm qos flags to user space
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 4/6] usb: add usb port auto power off mechanism
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 3/6] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 2/6] usb: Add driver/usb/core/port.c file to fill usb port related code.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH v2 1/6] usb: Register usb port's acpi power resources
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [RFC PATCH V2 0/6] usb: usb port power off mechanism
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH v2] usb: dwc3: exynos: use devm_ functions
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH] usb: ehci-s5p: use clk_prepare_enable and clk_disable_unprepare
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• RE: [PATCH] usb: ohci-exynos: use clk_prepare_enable and clk_disable_unprepare
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [RFC PATCH 4/5] usb: add runtime pm support for usb port device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v2] usb: dwc3: exynos: use devm_ functions
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: 3.7-rc5 modpost/link failure: ezusb
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: autodetect USB MTP device characteristics without libusb_open()
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: autodetect USB MTP device characteristics without libusb_open()
  • From: Peter Stuge <peter@xxxxxxxx>
• [PATCH 7/7] usb: host: xhci: move HC_STATE_SUSPENDED check to xhci_suspend()
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/7] usb: host: xhci: Stricter conditional for Z1 system models for Compliance Mode Patch
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/7] xHCI: Fix TD Size calculation on 1.0 hosts.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/7] xhci: Extend Fresco Logic MSI quirk.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/7] xhci: fix null-pointer dereference when destroying half-built segment rings
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/7] xhci: Avoid global symbol pollution with handshake.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/7] xhci: Fix conditional check in bandwidth calculation.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] xHCI patches for 3.8
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: problem with Roseweil eusb3 enclosure
  • From: covici@xxxxxxxxxxxxxx
• Re: problem with Roseweil eusb3 enclosure
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: fix null-pointer dereference when destroying half-built segment rings
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Fresco Logic Problem
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH] xhci: Add Lynx Point LP to list of Intel switchable hosts
  • From: Russell Webb <russell.webb@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  • From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
• [PATCH] cppi_dma: mark cppi_controller_create() and cppi_pool_init() as '__devinit'
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• Re: [PATCH v1] usb: musb: Make dma_controller_create __devinit
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>