Re: [PATCH] Try #3: Use SCSI read/write(16) with > 32-bit LBA drives

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 14, 2012 at 05:03:22PM -0500, Jason J. Herne wrote:
> From: "Jason J. Herne" <hernejj@xxxxxxxxx>
> 
> Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead
> of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands
> when a large capacity drive is installed. This issue was reported and discussed
> here: http://marc.info/?l=linux-usb&m=135247705222324&w=2

Is there any reason not to simply use the 16 byte command
unconditionally for large devices?

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux