Kevin, On 11/16/2012 10:08 PM, Kevin Hilman wrote: > Roger Quadros <rogerq@xxxxxx> writes: > >> Hi, >> >> This patchset addresses the following >> >> - Avoid addressing clocks one by one by name and use a for loop + bunch >> of cleanups. >> - Get number of channels/ports dynamically either from revision register >> or from platform data. Avoids getting clocks that are not present. >> - Add OMAP5 and HSIC mode (Not tested) >> - Save power on Panda when EHCI driver is not loaded. >> > > Seeing the clock changes/cleanups, I gave this a spin on OMAP3 > (3530/Beagle, 3530/Overo, 3730/Beagle-xM, 3730/OveroSTORM) to see if it > fixed up the problem where CORE does not hit retention in idle when USB > host is enabled, even with no devices attached. > > Unfortunately, it didn't help. :( oh that's bad. But this series wasn't meant to fix that ;). I could take a look at it once I get hold of the serial cable to connect to the beagle. regards, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
