Linux SPI

Thread Index

[Prev Page][Next Page]

Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH v2] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Ezequiel Garcia <ezequiel.garcia@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 1/3] spi: Re-do the returning value of rspi_dma_check_then_transfer
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 3/3] spi: Re-do the returning value of qspi_transfer_out_in
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH 2/3] spi: modify the name of qspi_trigger_transfer_out_int function
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH 1/3] spi: Re-do the returning value of rspi_dma_check_then_transfer
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH 1/3] spi: Re-do the returning value of rspi_dma_check_then_transfer
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
[PATCH 2/3] spi: modify the name of qspi_trigger_transfer_out_int function
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
[PATCH 3/3] spi: Re-do the returning value of qspi_transfer_out_in
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
[PATCH 0/3 v2] spi: Re-do correctly function name and 'ret' return value
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
Re: [PATCH v2] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Martin Sperl <martin@xxxxxxxxx>
Re: [PATCH 2/8] spi: sirf: request and free cs gpio in setup and cleanup callbacks
- From: Barry Song <21cnbao@xxxxxxxxx>
Re: [PATCH v2] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Michael Welling <mwelling@xxxxxxxx>
[PATCH v2 17/17] ARM: drop old LoCoMo driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 16/17] video: backlight: drop old locomo bl/lcd driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 15/17] ARM: pxa: poodle: don't preallocate IRQ space for locomo
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 14/17] ARM: pxa: poodle: use new LoCoMo driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 13/17] ASoC: pxa: poodle: make use of new locomo GPIO interface
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 12/17] ARM: sa1100: don't preallocate IRQ space for locomo
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 11/17] ARM: sa1100: make collie use new locomo drivers
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 10/17] i2c: add locomo i2c driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 09/17] spi: add locomo SPI driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 08/17] gpio: locomo: implement per-pin irq handling
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 07/17] gpio: port LoCoMo gpio support from old driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 06/17] video: lcd: add LoCoMo LCD driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 05/17] video: backlight: add new locomo backlight driver
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 04/17] input: locomokbd: provide an Alt-SysRQ combination
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 03/17] input: convert LoCoMo keyboard driver to use new locomo core
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 02/17] leds: port locomo leds driver to new locomo core
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 01/17] mfd: add new driver for Sharp LoCoMo
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
[PATCH v2 00/17] new locomo driver set
- From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
Re: [PATCH v2] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: sirf: replace BUG condition by error code for unsupported transfer
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: sirf: replace BUG condition by error code for unsupported transfer
- From: Barry Song <21cnbao@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
[PATCH v2] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Michael Welling <mwelling@xxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 3/3] ARM: sunxi: spi: use proper errno when message is too long.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] [PATCH 2/3] spidev: Add DT binding example.
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/3] ARM: sunxi: spi: use proper errno when message is too long.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [linux-sunxi] Re: [PATCH 2/3] spidev: Add DT binding example.
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
Re: [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/3] spidev: Add DT binding example.
- From: Michal Suchanek <hramrach@xxxxxxxxx>
Re: [PATCH 2/3] spidev: Add DT binding example.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/3] ARM: sunxi: spi: use proper errno when message is too long.
- From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Jonatas Rech <jonatas.rech@xxxxxxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 0/4] spi: spi-ath79: Devicetree support and misc fixes
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/4] devicetree: add binding documentation for the AR7100 SPI controller
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
[PATCH 1/4] devicetree: add binding documentation for the AR7100 SPI controller
- From: Alban Bedel <albeu@xxxxxxx>
[PATCH 2/4] spi: spi-ath79: Add device tree support
- From: Alban Bedel <albeu@xxxxxxx>
[PATCH 4/4] spi: spi-ath79: Set the initial state of CS0
- From: Alban Bedel <albeu@xxxxxxx>
[PATCH 3/4] spi: spi-ath79: Use clk_prepare_enable and clk_disable_unprepare
- From: Alban Bedel <albeu@xxxxxxx>
[PATCH 0/4] spi: spi-ath79: Devicetree support and misc fixes
- From: Alban Bedel <albeu@xxxxxxx>
Re: [PATCH] spi: fsl-spi: fix devm_ioremap_resource() error case
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1] spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1] spi: spi-fsl-dspi: remove clk reference when regmap_mmio initialize
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v1] spi: spi-fsl-dspi: remove clk reference when regmap_mmio initialize
- From: Haikun Wang <haikun.wang@xxxxxxxxxxxxx>
[PATCH v1] spi: Kconfig: Add SOC_LS1021A to SPI_FSL_DSPI dependence
- From: Haikun Wang <haikun.wang@xxxxxxxxxxxxx>
Re: [PATCH] spi/omap2-mcpsi: Always call spi_finalize_current_message()
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/1] spi: Re-do correctly function name and 'ret' return value
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
Re: [PATCH 1/1] spi: Re-do correctly function name and 'ret' return value
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH 0/1] spi: Re-do correctly function name and 'ret' return value
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
[PATCH 1/1] spi: Re-do correctly function name and 'ret' return value
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH] spi/omap2-mcpsi: Always call spi_finalize_current_message()
- From: Fionn Cleary <clearyf@xxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Jonatas Rech <jonatas.rech@xxxxxxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH] spi: fsl-spi: fix devm_ioremap_resource() error case
- From: Christophe Leroy <christophe.leroy@xxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spidev: use spi_sync instead of spi_async
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: spidev: use spi_sync instead of spi_async
- From: kernel@xxxxxxxxxxxxxxxx
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v2] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH v2] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH v2] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3] spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: spidev and the use of spi_async instead of spi_sync
- From: Mark Brown <broonie@xxxxxxxxxx>
spidev and the use of spi_async instead of spi_sync
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: "DATACOM - Jonatas.Rech" <jonatas.rech@xxxxxxxxxxxxxx>
[PATCH v3] spi: fsl-spi: use devm_ioremap_resource() to map parameter ram on CPM1
- From: Christophe Leroy <christophe.leroy@xxxxxx>
[PATCH v2] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: Christophe Leroy <christophe.leroy@xxxxxx>
Re: [PATCH] spi/omap2-mcpsi: Always call spi_finalize_current_message()
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi/omap2-mcpsi: Always call spi_finalize_current_message()
- From: Fionn Cleary <clearyf@xxxxxx>
[PATCH] spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
- From: kernel@xxxxxxxxxxxxxxxx
RE: [PATCH] spi/pxa2xx: add support for Intel Broxton
- From: "Zhong, Huiquan" <huiquan.zhong@xxxxxxxxx>
Re: [PATCH] spi/pxa2xx: add support for Intel Broxton
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH] spi: rb4xx: Fix set_cs logic.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: rb4xx: Fix set_cs logic.
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH] spi: rb4xx: Fix set_cs logic.
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: rb4xx: Fix set_cs logic.
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi/pxa2xx: add support for Intel Broxton
- From: "qipeng.zha" <qipeng.zha@xxxxxxxxx>
[PATCH] spi: rb4xx: Fix set_cs logic.
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
RE: [PATCH] spi: fix one potential spin_lock issue
- From: "Zhong, Huiquan" <huiquan.zhong@xxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v3] spi: bitbang: only toggle bitchanges
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v3] spi: bitbang: only toggle bitchanges
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Re: [PATCH v7] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: fix one potential spin_lock issue
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v3] spi: bitbang: only toggle bitchanges
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v2] spi: bitbang: Make setup_transfer() callback optional
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1] spi: check tx_buf and rx_buf in spi_unmap_msg
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: change timeout of polling driver to 1s
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: bcm2835: change timeout of polling driver to 1s
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH v1] spi: check tx_buf and rx_buf in spi_unmap_msg
- From: Robin Gong <b38343@xxxxxxxxxxxxx>
Re: spi-imx: real time operation
- From: Jakub Kiciński <moorray3@xxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v7] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
[PATCH] spi: fsl-espi: fix behaviour for full-duplex xfers
- From: Jonatas Rech <jonatas.rech@xxxxxxxxxxxxxx>
spi-imx: real time operation
- From: Jakub Kicinski <moorray3@xxxxx>
[PATCH] spi: fix one potential spin_lock issue
- From: Huiquan Zhong <huiquan.zhong@xxxxxxxxx>
Re: [PATCH] spi: bcm2835: Add GPIOLIB dependency
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: bcm2835: remove timeout code from polling function
- From: kernel@xxxxxxxxxxxxxxxx
Re: [PATCH v2] spi: bitbang: Make setup_transfer() callback optional
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH v2] spi: bitbang: Make setup_transfer() callback optional
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH] spi: bcm2835: Add GPIOLIB dependency
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: Add GPIOLIB dependency
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH] spi: bcm2835: Add GPIOLIB dependency
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
Re: [Nios2-dev] [PATCH] spi: bitbang: Make setup_transfer callback optional
- From: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Michael Welling <mwelling@xxxxxxxx>
Re: randconfig build error with next-20150413, in drivers/spi/spi-bcm2835.c
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
randconfig build error with next-20150413, in drivers/spi/spi-bcm2835.c
- From: Jim Davis <jim.epost@xxxxxxxxx>
[GIT PULL] SPI updates for v4.1
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v3] spi: bitbang: only toggle bitchanges
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
[PATCH] spi: bitbang: Make setup_transfer callback optional
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH 1/1] spi: altera: Add empty implementation of setup_transfer callback
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [REGRESSION] commit 0461a41 "spi: Pump transfers inside calling context for spi_sync()" breaks Apalis/Colibri T30 with MCP2515 SPI CAN controller
- From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
Re: [REGRESSION] commit 0461a41 "spi: Pump transfers inside calling context for spi_sync()" breaks Apalis/Colibri T30 with MCP2515 SPI CAN controller
- From: Mark Brown <broonie@xxxxxxxxxx>
[REGRESSION] commit 0461a41 "spi: Pump transfers inside calling context for spi_sync()" breaks Apalis/Colibri T30 with MCP2515 SPI CAN controller
- From: Marcel Ziswiler <marcel@xxxxxxxxxxxx>
Re: [PATCH 12/14] i2c-parport: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Re: [PATCH v2 4/5] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH v2] spi: altera: Add empty implementation of setup_transfer callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/1] spi: altera: Add empty implementation of setup_transfer callback
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v2] spi: altera: Add empty implementation of setup_transfer callback
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH 1/1] spi: altera: Add empty implementation of setup_transfer callback
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH 1/1] spi: altera: Add empty implementation of setup_transfer callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 0/1] Fix NULL pointer dereference
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 1/1] spi: altera: Add empty implementation of setup_transfer callback
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
[PATCH 0/1] Fix NULL pointer dereference
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 12/14] i2c-parport: return proper error values from attach
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH 12/14] i2c-parport: return proper error values from attach
- From: Jean Delvare <jdelvare@xxxxxxx>
Re: [PATCH 12/14] i2c-parport: return proper error values from attach
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Re: [PATCH v2 4/5] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH] spi: omap2-mcspi: Add support for GPIO chipselects
- From: Michael Welling <mwelling@xxxxxxxx>
Re: [PATCH V2 1/3] spi: img-spfi: Implement a handle_err() callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 4/5] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 5/5] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 2/5] spi: bcm53xx: Refactor driver to make nonspecific to 53xx SoCs
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 5/5] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH v2 4/5] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
[PATCH v2 2/5] spi: bcm53xx: Refactor driver to make nonspecific to 53xx SoCs
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v2 4/5] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v2 5/5] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v2 3/5] spi: bcm-mspi: Refactor to make driver nonspecific to 53xx SoCs
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v2 1/5] ARM: dts: Add binding for Broadcom MSPI driver.
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v2 0/5] Add MSPI support for Cygnus
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Willy Tarreau <w@xxxxxx>
[PATCH V2 3/3] spi: img-spfi: Control CS lines with GPIO
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH V2 2/3] spi: img-spfi: Reset controller after each message
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH V2 1/3] spi: img-spfi: Implement a handle_err() callback
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Re: [PATCH 02/14] ALSA: portman2x4: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Re: [PATCH 02/14] ALSA: portman2x4: return proper error values from attach
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: [PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
[PATCH 01/14] parport: return value of attach and parport_register_driver
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 03/14] ALSA: mts64: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 04/14] staging: panel: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 05/14] spi: lm70llp: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 06/14] spi: butterfly: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 07/14] [SCSI] ppa: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 08/14] [SCSI] imm: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 09/14] pps: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 14/14] char: lp: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 13/14] ppdev: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 12/14] i2c-parport: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 11/14] net: plip: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 10/14] pps: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 02/14] ALSA: portman2x4: return proper error values from attach
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
[PATCH 00/14] parport: check success of attach call
- From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
Re: [PATCH 4/5] spi: img-spfi: Setup TRANSACTION register before CONTROL register
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: Make master->handle_err() callback optional to avoid crashes
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: Make master->handle_err() callback optional to avoid crashes
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 4/5] spi: img-spfi: Setup TRANSACTION register before CONTROL register
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 4/5] spi: img-spfi: Setup TRANSACTION register before CONTROL register
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/5] spi: img-spfi: Limit bit clock to 1/4th of input clock
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/5] spi: img-spfi: Implement a prepare_message() callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/5] spi: img-spfi: Implement an unprepare_message() callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 2/5] spi: img-spfi: Implement a prepare_message() callback
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH 4/5] spi: img-spfi: Setup TRANSACTION register before CONTROL register
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH 5/5] spi: img-spfi: Control CS lines with GPIO
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH 3/5] spi: img-spfi: Implement an unprepare_message() callback
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
[PATCH 1/5] spi: img-spfi: Limit bit clock to 1/4th of input clock
- From: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver.
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Re: [PATCH] spi: setting up cs_gpio levels prior to registering spi devices
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: setting up cs_gpio levels prior to registering spi devices
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: setting up cs_gpio levels prior to registering spi devices
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH] spi: bcm2835: transform native-cs to gpio-cs on first spi_setup
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH V2] spi: bcm2835: enabling polling mode for transfers shorter than 30us
- From: kernel@xxxxxxxxxxxxxxxx
Re: [PATCH v3 3/3] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 2/3] devicetree: spi: fsl-dspi: Add cs-sck delays
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 1/3] spi: fsl-dspi: Fix clock rate scale values
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [patch] spi: signedness bug in qspi_trigger_transfer_out_int()
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Rafał Miłecki <zajec5@xxxxxxxxx>
Re: [PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v6] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver.
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Re: [PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
[PATCH v3 3/3] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH v3 2/3] devicetree: spi: fsl-dspi: Add cs-sck delays
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH v3 0/3] spi: fsl-dspi (vf610) clock fixes
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH v3 1/3] spi: fsl-dspi: Fix clock rate scale values
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
Re: [PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [patch] spi: signedness bug in qspi_trigger_transfer_out_int()
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
[patch] spi: signedness bug in qspi_trigger_transfer_out_int()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
[PATCH 2/4] spi: bcm53xx: Refactor to make driver nonspecific to 53xx SoCs
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH 3/4] spi: bcm-mspi: Make BCMA optional to support non-BCMA chips
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH 4/4] spi: bcm-mspi: Add support to set serial baud clock rate
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH 1/4] ARM: dts: Add binding for Broadcom MSPI driver.
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH 0/4] Add MSPI support for Cygnus
- From: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
[PATCH v1 2/2][RFC] spi: fsl-dspi: use double baud rate in approximation
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
[PATCH v1 1/2] spi: fsl-dspi: increase precision of baud rate approximation
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
[PATCH v1 0/2] spi: fsl-dspi: better approximation for baudrate
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: imx: read back the RX/TX watermark levels earlier
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers()
- From: Chen Gang <xili_gchen_5257@xxxxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH] spi: imx: read back the RX/TX watermark levels earlier
- From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCH v5] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH v2] spi: bitbang: only toggle bitchanges
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH v2] spi: bitbang: only toggle bitchanges
- From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
Re: Using gpio_keys with regmapped gpio?
- From: Mark Brown <broonie@xxxxxxxxxx>
Using gpio_keys with regmapped gpio?
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [PATCH v2] spi: bitbang: only toggle bitchanges
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Jonas Gorski <jogo@xxxxxxxxxxx>
Re: [PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
[PATCH v4] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH v2] spi: bitbang: only toggle bitchanges
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH v2] spi: bitbang: only toggle bitchanges
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards
- From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Re: [PATCH] spi: bitbang: only toggle bitchanges
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v3] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
[PATCH] spi: bitbang: only toggle bitchanges
- From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
[PATCH v2 1/1] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Michal Simek <michal.simek@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Michal Simek <michal.simek@xxxxxxxxxx>
spi-altera in mainline
- From: Pelle Nilsson <per.nilsson@xxxxxxxxx>
Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data
- From: Cao Minh Hiep <cm-hiep@xxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Stefan Agner <stefan@xxxxxxxx>
Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 1/1] spi: Using Trigger number to transmit/receive data
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v2 1/1] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
[PATCH v2 0/1] spi: Add driver for Routerboard RB4xx boards
- From: Bert Vermeulen <bert@xxxxxxxx>
[PATCH v2 0/2] spi: fsl-dspi (vf610) clock fixes
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH v2 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH v2 1/2] spi: fsl-dspi: Fix clock rate scale values
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[patch] spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div()
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Michal Simek <michal.simek@xxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/6] spi: bcm2835: fix code formatting issue
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH/RFC 6/6] spi: bcm2835: set gpio-cs to high state prior to any
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 5/6] spi: bcm2835: add polling mode for transfers below 30us
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 4/6] spi: bcm2835: warn about native-chip-selects being used
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 3/6] spi: bcm2835: fill FIFO before enabling interrupts to
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 2/6] spi: bcm2835: fix code formatting issue
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 1/6] spi: bcm2835: remove dependency on handle_err which is
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[PATCH 0/6] spi: bcm2835: collection of driver-optimizations
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
spi: bcm2835: strange observation with cs_gpios low after reboot
- From: Martin Sperl <martin@xxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: spidev: Warn loudly if instantiated from DT as "spidev"
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 2/2] spi: fsl-dspi: Add ~50ns delay between cs and sck
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH 0/2] spi: fsl-dspi (vf610) clock fixes
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
[PATCH 1/2] spi: fsl-dspi: Fix clock rate scale values
- From: Aaron Brice <aaron.brice@xxxxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Michal Simek <michal.simek@xxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
Re: [PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side
- From: Doug Anderson <dianders@xxxxxxxxxxxx>
[PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay
- From: Julius Werner <jwerner@xxxxxxxxxxxx>
[PATCH 1/2] spi/rockchip: Round up clock rate divisor to err on the safe side
- From: Julius Werner <jwerner@xxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Hans-Christian Egtvedt <egtvedt@xxxxxxxxxxxx>
[RFC 4/6] spi: atmel: use atmel_io.h to provide on-chip IO
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
[PATCH] SPI: bcm2835: move to the transfer_one driver model
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [RESEND PATCH] spi: of: do explicitly request modules for of-registered devices
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Mark Brown <broonie@xxxxxxxxxx>
[RESEND PATCH] spi: of: do explicitly request modules for of-registered devices
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 1/1] spi: dw: fix crash on setup stage
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 1/1] spi: dw: fix crash on setup stage
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v2 1/1] spi: pxa2xx: replace ugly table by approximation
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH V2 - RESEND] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
[GIT PULL] spi fixes for v4.0
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH v1 2/2] spi: pxa2xx: replace ugly table by approximation
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v1 0/2] spi: pxa2xx: allow to set mostly any baudrate for Quark case
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v1 1/2] spi: pxa2xx: shift clk_div in one place
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message
- From: Ian Abbott <abbotti@xxxxxxxxx>
Re: [PATCH] SPI: BCM2835: enable support of 3-wire mode
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: spidev: fix possible arithmetic overflow for multi-transfer message
- From: Ian Abbott <abbotti@xxxxxxxxx>
Re: [PATCH 1/2] spi: pxa2xx: Remove needless includes
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: spi: spidev: only use up TX/RX bounce buffer space when needed
- From: Ian Abbott <abbotti@xxxxxxxxx>
[PATCH] spi: bcm2835: fill/drain SPI-fifo as much as possible during interrupt
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
re: spi: spidev: only use up TX/RX bounce buffer space when needed
- From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
[PATCH 2/2] spi: omap-uwire: Remove needless include asm/irq.h
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
[PATCH 1/2] spi: pxa2xx: Remove needless includes
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 09/13] spi: atmel: use endian agnostic IO
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH V2] SPI: BCM2835: fix all checkpath --strict messages
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup()
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup()
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2
- From: Noralf Trønnes <noralf@xxxxxxxxxxx>
[PATCH V2] SPI: BCM2835: fix all checkpath --strict messages
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 2/2] spi: Add driver for the CPLD chip on Mikrotik RB4xx boards
- From: Bert Vermeulen <bert@xxxxxxxx>
[PATCH 0/2] spi: Add driver for Routerboard RB4xx boards
- From: Bert Vermeulen <bert@xxxxxxxx>
[PATCH 1/2] spi: Add SPI driver for Mikrotik RB4xx series boards
- From: Bert Vermeulen <bert@xxxxxxxx>
Re: [PATCH V2] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RESEND_2 PATCH 1/3] ARM: sun4i: spi: Allow transfers larger than FIFO size
- From: Olliver Schinagl <oliver@xxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: enable support of 3-wire mode
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: enable support of 3-wire mode
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: clock divider can be a multiple of 2
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH V2] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH] SPI: BCM2835: fix all checkpath --strict messages
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] SPI: BCM2835: enable support of 3-wire mode
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH] SPI: BCM2835: clock divider can be a multiple of 2
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH V2] SPI: BCM2835: allow arbitrary GPIO to act as SPI-chip_select
- From: kernel@xxxxxxxxxxxxxxxx
[PATCH] SPI: BCM2835: fix all checkpath --strict messages
- From: kernel@xxxxxxxxxxxxxxxx
Re: [PATCH 09/13] spi: atmel: use endian agnostic IO
- From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
Re: [PATCH/RFC] spi: sh-msiof: Fix MSIOF address for DMAC
- From: Simon Horman <horms@xxxxxxxxxxxx>
Patch to parameterize DMA_MIN_BYTES for omap2-mcspi
- From: Greg Knight <g.knight@xxxxxxxxxxxxx>
Re: [PATCH 09/13] spi: atmel: use endian agnostic IO
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH 09/13] spi: atmel: use endian agnostic IO
- From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCH] spi: trigger trace event for message-done before mesg->complete
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@xxxxxxxxxxx>
Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv5] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 15/35 linux-next] spi: constify of_device_id array
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH/RFC] spi: sh-msiof: Fix MSIOF address for DMAC
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH 2/2] dt/bindings: control CS via standard GPIO operations instead of SPI-HW
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
Re: [PATCH 2/2] dt/bindings: control CS via standard GPIO operations instead of SPI-HW
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] dt/bindings: control CS via standard GPIO operations instead of SPI-HW
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[PATCH 00/35 linux-next] constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
[PATCH 15/35 linux-next] spi: constify of_device_id array
- From: Fabian Frederick <fabf@xxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@xxxxxxxxxxx>
[PATCH/RFC] spi: sh-msiof: Fix MSIOF address for DMAC
- From: Yoshihiro Kaneko <ykaneko0929@xxxxxxxxx>
Re: [PATCH 04/10] pm: domains: sync runtime PM status with PM domains after probe
- From: Kevin Hilman <khilman@xxxxxxxxxx>
[PATCH v2] spi: Ensure that CS line is in non-active state after spi_setup()
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
[PATCH 04/10] pm: domains: sync runtime PM status with PM domains after probe
- From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver
- From: Vinod Koul <vinod.koul@xxxxxxxxx>
Re: [PATCHv5] spi: Convert DesignWare SPI driver to 32-bit accesses
- From: Mark Brown <broonie@xxxxxxxxxx>
[PATCHv5] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCHv5] spi: Convert DesignWare SPI driver to 32-bit accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv4] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH] spi: fsl-spi: use of_iomap() to map parameter ram on CPM1
- From: leroy christophe <christophe.leroy@xxxxxx>
[PATCH] spi: sh-msiof: Fix limit maximum word transfer size of FIFO size
- From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@xxxxxxxxxxx>
[PATCHv4] spi: Convert Designware SPI driver to 32-bit accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCHv3] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCHv4] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCHv3] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCHv3] spi: dw-spi: Convert to 32-bit register accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCHv3] spi: dw-spi: Convert 16bit accesses to 32bit accesses
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH 2/2] dt/bindings: control CS via standard GPIO operations instead of SPI-HW
- From: Martin Sperl <kernel@xxxxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCHv2 4/4] Moved spidev_tool.c to tools/spi
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv2 2/4] Added verbose output
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv2 3/4] Added input buffer from the terminal
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCHv2 1/4] Cleaned hexadecimal dump
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCHv2 1/4] Cleaned hexadecimal dump
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCHv2 4/4] Moved spidev_tool.c to tools/spi
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCHv2 3/4] Added input buffer from the terminal
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCHv2 2/4] Added verbose output
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCHv2 0/4] spi: spidev_test: Added functionalities
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: Fixing eSPI controller driver: some queries
- From: Jônatas Rech <jonatas.rech@xxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 1/3] spi: dw-spi: Single Register read to clear IRQs
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/4] Cleaned hexadecimal dump
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/4] Added input buffer from the terminal.
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v2] spi: cadence: Remove Kconfig dependency
- From: Mark Brown <broonie@xxxxxxxxxx>
[GIT PULL] spi fixes for v4.0
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[PATCH v3 6/7] spi: dw-mid: convert to use dw_dmac instead of intel_mid_dma
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 3/7] spi: dw-mid: take care of FIFO overrun/underrun when do DMA
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 7/7] dmaengine: intel-mid-dma: remove the driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 2/7] spi: dw-mid: split dma_setup() from dma_transfer()
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 5/7] spi: dw-mid: move to use core SPI DMA mappings
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 1/7] spi: dw-mid: convert value of dma_width to enum dma_slave_buswidth
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 4/7] spi: dw-mid: clear ongoing DMA transfers on timeout
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
[PATCH v3 0/7] spi: dw: make DMA working
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH 1/4] Cleaned hexadecimal dump
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
Re: [RFC PATCH] spi: Ensure that CS line is in non-active state after setup
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH v4 0/3] spi: dw: refactor to use SPI core message handling
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Re: [PATCH 1/3] spi: imx: Fix DMA transfer
- From: Robin Gong <b38343@xxxxxxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
[PATCH v2] spi: cadence: Remove Kconfig dependency
- From: Michal Simek <michal.simek@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [RFC PATCH] spi: Ensure that CS line is in non-active state after setup
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [RFC PATCH] spi: Ensure that CS line is in non-active state after setup
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi: Use PM ops instead of legacy suspend/resume
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH] spi: xilinx: Use standard num-cs binding
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/4] Cleaned hexadecimal dump
- From: Joe Perches <joe@xxxxxxxxxxx>
[PATCH 2/2] spi: Remove support for legacy PM
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
[PATCH 1/2] spi: Use PM ops instead of legacy suspend/resume
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: Lars-Peter Clausen <lars@xxxxxxxxxx>
Re: [PATCH 1/4] Cleaned hexadecimal dump
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH 1/4] Cleaned hexadecimal dump
- From: Joe Perches <joe@xxxxxxxxxxx>
Re: [RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [RFC/PATCHv2 1/3] spi: dw-spi: Single Register read to clear IRQs
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH v2, resend for stable 1/1] spi: dw-mid: clear BUSY flag fist and test other one
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Re: [PATCH] spi: spidev_test: Added functionalities
- From: AdrianRemonda <adrianremonda@xxxxxxxxx>
[PATCH 2/4] Added verbose output
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCH 1/4] Cleaned hexadecimal dump
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCH 4/4] Moved spidev_tools.c to tools/spi
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCH 3/4] Added input buffer from the terminal.
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
[PATCH 0/4] spi: spidev_test: Added functionalities
- From: Adrian Remonda <adrianremonda@xxxxxxxxx>
Re: [PATCH v2, resend for stable 1/1] spi: dw-mid: clear BUSY flag fist and test other one
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v2 2/9] spi: dw-mid: clear BUSY flag fist and test other one
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi: qup: Fix cs-num DT property parsing
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] SPI: control CS via standard GPIO operations instead of SPI-HW
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] dt/bindings: control CS via standard GPIO operations instead of SPI-HW
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
Re: [PATCH 1/2] SPI: control CS via standard GPIO operations instead of SPI-HW
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
[RFC/PATCHv2 3/3] spi: dw-spi: Pointers select 16b vs. 32b DesignWare access
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[RFC/PATCHv2 2/3] dt-binding: spi: spi-dw: Select 16b or 32b access for Designware SPI
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[RFC/PATCHv2 1/3] spi: dw-spi: Single Register read to clear IRQs
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
[RFC/PATCHv2 0/3] spi: spi-dw: Select 16b or 32b register access
- From: <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [RFC/PATCH 0/2] spi: spi-dw: Select 16b or 32b register access
- From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
Re: [PATCH v4 3/3] spi: dw: move to SPI core message handling
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 2/3] spi: dw: program registers as soon as possible
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 1/3] spi: dw: make sure SPI controller is enabled
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH v4 0/3] spi: dw: refactor to use SPI core message handling
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 4/4] spi: pl022: Fix race in giveback() leading to driver lock-up
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 3/4] spi: pl022: Remove dead code
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/4] spi: pl022: Don't touch unspecified bits in interrupt mask
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/4] spi: pl022: Remove incorrect TxFIFO full reporting
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 1/2] spi: introduce master->handle_err() callback
- From: Mark Brown <broonie@xxxxxxxxxx>
Re: [PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
[RFC PATCH] spi: Ensure that CS line is in non-active state after setup
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
[PATCH 1/2] spi: qup: Fix cs-num DT property parsing
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
[PATCH 2/2] spi: qup: Request CS GPIO's during probe
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH v4] spi: qup: Add DMA capabilities
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
Re: [PATCH v2 1/9] spi: dw-mid: avoid potential NULL dereference
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

[Index of Archives] [CentOS] [IETF Annouce] [Security] [Netfilter] [Bugtraq] [Kernel Announce]