[PATCH 3/3] spi/fsl-espi: Add the 4Byte address width device support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hou Zhiqiang <B48286@xxxxxxxxxxxxx>

Get the address width information from the spi_message to correct the
address to operate.

when the one-time transfer length exceed the max limited length of eSPI
controller 0xFFFF, for the subsequent transfer, the address to operate
need to be corrected.

Signed-off-by: Hou Zhiqiang <B48286@xxxxxxxxxxxxx>
---
 drivers/spi/spi-fsl-espi.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index d0a73a0..59931d3 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -250,19 +250,31 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	return mpc8xxx_spi->count;
 }
 
-static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
+static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd, u8 addr_width)
 {
 	if (cmd) {
-		cmd[1] = (u8)(addr >> 16);
-		cmd[2] = (u8)(addr >> 8);
-		cmd[3] = (u8)(addr >> 0);
+		if (addr_width == 3) {
+			cmd[1] = (u8)(addr >> 16);
+			cmd[2] = (u8)(addr >> 8);
+			cmd[3] = (u8)(addr >> 0);
+		} else if (addr_width == 4) {
+			cmd[1] = (u8)(addr >> 24);
+			cmd[2] = (u8)(addr >> 16);
+			cmd[3] = (u8)(addr >> 8);
+			cmd[4] = (u8)(addr >> 0);
+		}
 	}
 }
 
-static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
+static inline unsigned int fsl_espi_cmd2addr(u8 *cmd, u8 addr_width)
 {
-	if (cmd)
-		return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
+	if (cmd) {
+		if (addr_width == 3)
+			return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
+		else if (addr_width == 4)
+			return cmd[1] << 24 | cmd[2] << 16
+				| cmd[3] << 8 | cmd[4] << 0;
+	}
 
 	return 0;
 }
@@ -367,7 +379,9 @@ static void fsl_espi_rw_trans(struct spi_message *m,
 	unsigned int trans_len;
 	unsigned int addr;
 	int i, pos, loop;
+	u8 addr_width;
 
+	addr_width = m->addr_width;
 	local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL);
 	if (!local_buf) {
 		espi_trans->status = -ENOMEM;
@@ -388,9 +402,9 @@ static void fsl_espi_rw_trans(struct spi_message *m,
 		}
 
 		if (pos > 0) {
-			addr = fsl_espi_cmd2addr(local_buf);
+			addr = fsl_espi_cmd2addr(local_buf, addr_width);
 			addr += pos;
-			fsl_espi_addr2cmd(addr, local_buf);
+			fsl_espi_addr2cmd(addr, local_buf, addr_width);
 		}
 
 		espi_trans->n_tx = n_tx;
-- 
2.1.0.27.g96db324

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux