Linux Serial
[Prev Page][Next Page]
- [PATCH v7 3/6] dt-bindings: pinctrl: mt8183: add binding document
- [PATCH v7 5/6] arm64: dts: mt8183: add pintcrl file
- [PATCH v7 6/6] arm64: dts: mt8183: add spi node
- [PATCH v7 4/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v7 2/6] dt-bindings: serial: Add compatible for Mediatek MT8183
- [PATCH v7 1/6] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
- [PATCH AUTOSEL 4.20 45/77] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 4.19 37/65] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 4.19 36/65] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- [PATCH AUTOSEL 4.14 24/40] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 4.9 15/27] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 4.4 12/20] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 3.18 09/16] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH AUTOSEL 4.20 44/77] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- Re: [RFC PATCH v1 04/25] printk-rb: add writer interface
- Re: [RFC PATCH v1 04/25] printk-rb: add writer interface
- Re: [RFC PATCH v1 04/25] printk-rb: add writer interface
- Re: [RFC PATCH v1 03/25] printk-rb: define ring buffer struct and initializer
- Re: [RFC PATCH v1 02/25] printk-rb: add prb locking functions
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v10 3/3] dt-bindings: dma: uart: rename binding
- Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- RE: [PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
- Re: [PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [RFC PATCH v1 17/25] printk: add processor number to output
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 02/25] printk-rb: add prb locking functions
- RE: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 02/25] printk-rb: add prb locking functions
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 07/25] printk-rb: add functionality required by printk
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v2 2/2] serial: tty: 8250_pci Have ACCES cards that use the four port Pericom PI7C9X7954 chip use the pci_pericom_setup()
- [PATCH v2 1/2] serial: 8250: 8250_pci Fix number of ports for ACCES serial cards
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 00/25] printk: new implementation
- Re: [RFC PATCH v1 00/25] printk: new implementation
- [PATCH] tty: serial: samsung: Enable baud clock during initialisation
- Re: [RFC PATCH v1 07/25] printk-rb: add functionality required by printk
- Re: [RFC PATCH v1 08/25] printk: add ring buffer and kthread
- Re: [RFC PATCH v1 03/25] printk-rb: define ring buffer struct and initializer
- Re: [RFC PATCH v1 01/25] printk-rb: add printk ring buffer documentation
- [RFC PATCH v1 08/25] printk: add ring buffer and kthread
- [RFC PATCH v1 13/25] printk: track seq per console
- [RFC PATCH v1 12/25] printk: minimize console locking implementation
- [RFC PATCH v1 05/25] printk-rb: add basic non-blocking reading interface
- [RFC PATCH v1 09/25] printk: remove exclusive console hack
- [RFC PATCH v1 10/25] printk: redirect emit/store to new ringbuffer
- [RFC PATCH v1 15/25] printk: print history for new consoles
- [RFC PATCH v1 16/25] printk: implement CON_PRINTBUFFER
- [RFC PATCH v1 21/25] printk: implement KERN_CONT
- [RFC PATCH v1 11/25] printk_safe: remove printk safe code
- [RFC PATCH v1 17/25] printk: add processor number to output
- [RFC PATCH v1 01/25] printk-rb: add printk ring buffer documentation
- [RFC PATCH v1 18/25] console: add write_atomic interface
- [RFC PATCH v1 22/25] printk: implement /dev/kmsg
- [RFC PATCH v1 23/25] printk: implement syslog
- [RFC PATCH v1 24/25] printk: implement kmsg_dump
- [RFC PATCH v1 02/25] printk-rb: add prb locking functions
- [RFC PATCH v1 04/25] printk-rb: add writer interface
- [RFC PATCH v1 20/25] serial: 8250: implement write_atomic
- [RFC PATCH v1 19/25] printk: introduce emergency messages
- [RFC PATCH v1 00/25] printk: new implementation
- [RFC PATCH v1 25/25] printk: remove unused code
- [RFC PATCH v1 06/25] printk-rb: add blocking reader support
- [RFC PATCH v1 14/25] printk: do boot_delay_msec inside printk_delay
- [RFC PATCH v1 07/25] printk-rb: add functionality required by printk
- [RFC PATCH v1 03/25] printk-rb: define ring buffer struct and initializer
- Re: RFC: drop ISA support in the synlink tty driver?
- Re: RFC: drop ISA support in the synlink tty driver?
- Re: RFC: drop ISA support in the synlink tty driver?
- Re: RFC: drop ISA support in the synlink tty driver?
- Re: [PATCH 1/2] tty: serial: 8250_pci Fix number of ports for ACCES serial cards
- Re: [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- [PATCH] tty/synclink: remove ISA support
- RFC: drop ISA support in the synlink tty driver?
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH 2/2] tty: serial: 8250_pci have ACCES cards with Pericom chips use quirk
- Re: [PATCH 1/2] tty: serial: 8250_pci Fix number of ports for ACCES serial cards
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH 2/2] tty: serial: 8250_pci have ACCES cards with Pericom chips use quirk
- Re: [PATCH 1/2] tty: serial: 8250_pci Fix number of ports for ACCES serial cards
- Re: [GIT PULL] TTY/Serial fixes for 5.0-rc6
- [PATCH v2 10/15] serial: Add Milbeaut serial control
- [PATCH v2 09/15] dt-bindings: serial: Add Milbeaut serial driver description
- [PATCH v2 00/15] Add basic support for Socionext Milbeaut M10V SoC
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [GIT PULL] TTY/Serial fixes for 5.0-rc6
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [PATCH 2/2] tty: serial: 8250_pci have ACCES cards with Pericom chips use quirk
- Re: [PATCH 1/2] tty: serial: 8250_pci Fix number of ports for ACCES serial cards
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [PATCH 2/2] tty: serial: 8250_pci have ACCES cards with Pericom chips use quirk
- [PATCH 1/2] tty: serial: 8250_pci Fix number of ports for ACCES serial cards
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [PATCH v2] tty: serial: meson_uart: Add support for kernel debugger
- Re: [PATCH] tty: serial: meson_uart: Add support for kernel debugger
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- Re: [PATCH v6 2/6] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [PATCH 1/2] tty: serial: meson_uart: Add support for kernel debugger
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [PATCH] serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
- [PATCH v2] serial: imx: implement rts delaying for rs485
- Re: [PATCH] serial: imx: implement rts delaying for rs485
- [PATCH 1/2] tty: serial: meson_uart: Add support for kernel debugger
- [PATCH] serial: imx: implement rts delaying for rs485
- Re: [PATCH] serial: imx: support an enable-gpio
- [PATCH] serial: imx: support an enable-gpio
- Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH 3.16 165/305] arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
- Re: [PATCH v2] serial: sh-sci: Do not free irqs that have already been freed
- Re: [PATCH] tty: serial: meson_uart: Add support for kernel debugger
- [PATCH] tty: serial: meson_uart: Add support for kernel debugger
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: 答复: [PATCH][V5] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH] serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
- Re: [PATCH] serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
- [PATCH] serial: mps2-uart: Add parentheses around conditional in mps2_uart_shutdown
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- 答复: [PATCH][V5] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH][V5] tty: fix race between flush_to_ldisc and tty_open
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- [PATCH][V5] tty: fix race between flush_to_ldisc and tty_open
- Re: [RFC/PATCH 0/5] DVFS in the OPP core
- Re: [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- 答复: 答复: 答复: [PATCH][v4] tty: fix race between flush_to_ldisc and tty_open
- Re: 答复: 答复: [PATCH][v4] tty: fix race between flush_to_ldisc and tty_open
- [PATCH] serial: max310x: Correction of the initial setting of the MODE1 bits for various supported ICs.
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- 答复: 答复: [PATCH][v4] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings.
- Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: 答复: [PATCH][v4] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- 答复: [PATCH][v4] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH v2] serial: sh-sci: Do not free irqs that have already been freed
- [PATCH v2 2/2] serial: mps2-uart: support combined irq
- [PATCH v2 1/2] serial: mps2-uart: move to dynamic port allocation
- [PATCH v2 0/2] serial: mps2-uart: minor improvements
- [PATCH] serdev: ttyport: call tiocmget and tiocmset ops directly
- Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- Re: [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq
- Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- From: Russell King - ARM Linux admin
- Re: [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- Re: [PATCH v4 0/2] serial: Add Tegra Combined UART driver
- Re: [PATCH] tty: ldisc: add sysctl to prevent autoloading of ldiscs
- Re: [PATCH v4 0/2] serial: Add Tegra Combined UART driver
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- [RFC/PATCH 0/5] DVFS in the OPP core
- [RFC/PATCH 3/5] tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state
- [RFC/PATCH 1/5] OPP: Don't overwrite rounded clk rate
- [RFC/PATCH 2/5] OPP: Make dev_pm_opp_set_rate() with freq=0 as valid
- [RFC/PATCH 4/5] spi: spi-geni-qcom: Use OPP API to set clk/perf state
- [RFC/PATCH 5/5] arm64: dts: sdm845: Add OPP table for all qup devices
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- [PATCH v2] serial: sh-sci: Do not free irqs that have already been freed
- RE: [PATCH] serial: sh-sci: Do not free irqs that have already been freed
- Re: [PATCH] serial: sh-sci: Do not free irqs that have already been freed
- [PATCH] serial: sh-sci: Do not free irqs that have already been freed
- [PATCH AUTOSEL 4.20 034/304] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.20 194/304] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH AUTOSEL 4.19 028/258] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.19 164/258] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH v3 2/2] Dt-bindings: Serial: Add X1000 serial bindings.
- [PATCH v3 1/2] Serial: Ingenic: Add support for the X1000.
- Add Ingenic X1000 serial support
- [PATCH AUTOSEL 4.19 163/258] serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure
- [PATCH AUTOSEL 4.19 162/258] serial: sh-sci: Fix locking in sci_submit_rx()
- [PATCH AUTOSEL 4.9 059/107] tty: serial: samsung: Properly set flags in autoCTS mode
- Re: [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver.
- Re: [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver.
- [PATCH AUTOSEL 4.14 105/170] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH AUTOSEL 4.4 45/80] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH AUTOSEL 3.18 34/61] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH AUTOSEL 3.18 08/61] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.4 11/80] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.9 013/107] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.14 020/170] serial: fsl_lpuart: clear parity enable bit when disable parity
- [PATCH AUTOSEL 4.20 195/304] tty: serial: samsung: Properly set flags in autoCTS mode
- [PATCH AUTOSEL 4.20 193/304] serial: sh-sci: Fix locking in sci_submit_rx()
- [PATCH v2 2/2] Serial: Ingenic: Add X1000 suppor for the UART driver.
- [PATCH v2 1/2] Serial: Ingenic: Add X1000 suppor for the UART driver.
- Serial: Ingenic: Add X1000 suppor for the UART driver.
- Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000.
- Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000.
- Re: [PATCH 1/2] Serial: Ingenic: Add support for the X1000.
- [PATCH 2/2] Serial: Ingenic: Add support for the X1000.
- [PATCH 1/2] Serial: Ingenic: Add support for the X1000.
- Add Ingenic X1000 serial support.
- RE: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH] serial: 8250: Add OF support for Xscale variant
- Re: [PATCH] tty: Fix WARNING in tty_set_termios
- [PATCH] tty: Fix WARNING in tty_set_termios
- Re: [GIT PULL] TTY/Serial fixes for 5.0-rc4
- [PATCH 2/2] serial: mps2-uart: support combined tx and rx irq
- [PATCH 1/2] serial: mps2-uart: move to dynamic port allocation
- [PATCH 0/2] serial: mps2-uart: minor improvements
- [GIT PULL] TTY/Serial fixes for 5.0-rc4
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH v1 2/2] serial: 8250_pci: Replace custom code with pci_match_id()
- [PATCH v1 1/2] serial: 8250_pci: Make PCI class test non fatal
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v6 4/6] dt-bindings: serial: Add compatible for Mediatek MT8183
- [PATCH v6 3/6] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
- [PATCH v6 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [PATCH v6 2/6] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
- [PATCH v6 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- [PATCH v6 0/6] Add basic and clock support for Mediatek MT8183 SoC
- [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- [PATCH v4 2/2] serial: Add Tegra Combined UART driver
- [PATCH v4 1/2] dt-bindings: serial: Add bindings for nvidia,tegra194-tcu
- [PATCH v4 0/2] serial: Add Tegra Combined UART driver
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 6/6] arm64: dts: sdm845: Add interconnect for GENI QUP
- Re: [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- Re: [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- Re: [PATCH 0/6] Add interconnect support for GENI QUPs
- [PATCH v2] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH] tty: serial: lpc32xx_hs: fix missing console boot messages
- [PATCH] tty: serial: 8250_mtk: Fix potential NULL pointer dereference
- From: Gustavo A. R. Silva
- Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- From: Russell King - ARM Linux admin
- Re: [PATCH 02/14] dt-bindings: soc: milbeaut: Add Milbeaut trampoline description
- [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- Re: [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH v2] serial: core: Fix race between freeing and writing to transmit buffer
- [PATCH 6/6] arm64: dts: sdm845: Add interconnect for GENI QUP
- [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support
- [PATCH 3/6] i2c: i2c-qcom-geni: Add interconnect support
- [PATCH 2/6] soc: qcom: Add wrapper to support for Interconnect path
- [PATCH 1/6] dt-bindings: soc: qcom: Add interconnect binding for GENI QUP
- [PATCH 0/6] Add interconnect support for GENI QUPs
- Re: [PATCH] tty: ldisc: add sysctl to prevent autoloading of ldiscs
- Re: [PATCH] dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
- Re: [PATCH 2/3] dt-bindings: serial: omap_serial: add clocks entry
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH] tty: ldisc: add sysctl to prevent autoloading of ldiscs
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- Re: [PATCH v10 3/3] dt-bindings: dma: uart: rename binding
- [PATCH 5/6] tty: serial: qcom_geni_serial: Add interconnect support
- Re: [PATCH 0/3] serdev support for n_gsm
- [PATCH 2/4] serial: fsl_lpuart: specify transmit FIFO size for 32-bit variant
- [PATCH 1/4] serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
- [PATCH 3/4] serial: fsl_lpuart: consider TX FIFO too in lpuart32_tx_empty
- Re: [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- [PATCH 4/4] serial: fsl_lpuart: DMA support for 32-bit variant
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [BUG] tiocsti() NULL dereference if ld->ops->receive_buf==NULL
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH] tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- Re: [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH 1/2] pinctrl: sh-pfc: r8a7779: add HSCIF0/1 pins
- [PATCH 2/2] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- [PATCH 0/2] ARM: shmobile: r8a7779: HSCIF support
- [PATCH v10 1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v10 2/3] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v10 0/3] add uart DMA function
- [PATCH v10 3/3] dt-bindings: dma: uart: rename binding
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH] serial: 8250: Fix serial8250 initialization crash
- [PATCH] serial: 8250: Fix serial8250 initialization crash
- Re: [PATCH] uart: Fix crash in uart_write and uart_put_char
- [PATCH] uart: Fix crash in uart_write and uart_put_char
- [PATCH] tty: serial: lpc32xx_hs: fix missing console boot messages
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- [PATCH v2] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH] tty: serial: meson: if no alias specified use an available id
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH v2 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- [PATCH v2 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] tty: serial: meson: if no alias specified use an available id
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] 8250_pci.c: Update NI specific devices class to multi serial
- Re: [PATCH 0/3] serdev support for n_gsm
- Re: [PATCH 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- Re: [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- Re: [PATCH] tty: not call tty close in fallback
- Re: [PATCH] tty: not call tty close in fallback
- [PATCH] tty: not call tty close in fallback
- [PATCH 3/3] tty: n_gsm: Add support for serdev drivers
- [PATCH 2/3] n_gsm: Constify u8 and unsigned char usage
- [PATCH 1/3] tty: n_gsm: Add copy_config() and gsm_config() to prepare for serdev
- [PATCH 0/3] serdev support for n_gsm
- Re: Hilscher NetX mach-netx refactorings
- Re: [GIT PULL] TTY/Serial fixes for 5.0-rc2
- [GIT PULL] TTY/Serial fixes for 5.0-rc2
- Re: [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- [PATCH v2] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re:[PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- [PATCH][V2][resend] tty: fix race between flush_to_ldisc and tty_open
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH 2/2] dt-bindings: serial: Move renesas,rzn1-uart into the snps-dw-apb-uart binding
- [PATCH 1/2] dt-bindings: serial: Convert snps,dw-apb-uart to json-schema
- [PATCH] dt-bindings: serial: Convert arm,pl011 to json-schema
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- [PATCH] tty/serial: use uart_console_write in the RISC-V SBL early console
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH 3/4] ARM: dts: r8a7779: Add HSCIF0/1 device nodes
- [PATCH] dt-bindings: serial: sh-sci: Document r8a7778/9 HSCIF bindings
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- [PATCH] tty/serial: emit CR before NL in RISC-V SBL console
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH] 8250_pci.c: Only check for communication class in serial_pci_guess_board
- Re: [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- [bug report] serial: 8250: Rate limit serial port rx interrupts during input overruns
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- Re: [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- Re: [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- [PATCH 0/3] 8250_omap: use clk APIs to get fclk freqeuncy
- [PATCH 2/3] dt-bindings: serial: omap_serial: add clocks entry
- [PATCH 3/3] serial: 8250_omap: Use clk_get_rate() to obtain fclk frequency
- [PATCH 1/3] serial: 8250_omap: Drop check for of_node
- Re: Serial device with PCI class memory device (0x05)
- [PATCH AUTOSEL 4.20 014/117] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.20 077/117] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.19 12/97] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.19 62/97] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.14 05/53] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.14 33/53] tty/serial: do not free trasnmit buffer page under port lock
- [PATCH AUTOSEL 4.9 04/36] serial: set suppress_bind_attrs flag only if builtin
- [PATCH AUTOSEL 4.9 23/36] tty/serial: do not free trasnmit buffer page under port lock
- Re: [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- Re: [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- Re: [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- [PATCH v2 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH v2 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- [PATCH v2 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- [PATCH v2 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- [PATCH v2 0/4] tty: serial: qcom_geni_serial: Assorted cleanups
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- [PATCH v5 0/4] serial: sh-sci: Fix fallback to PIO on DMA failure
- [PATCH v5 4/4] serial: sh-sci: Make RX/TX DMA function names consistent
- [PATCH v5 1/4] serial: sh-sci: Extract sci_dma_rx_chan_invalidate()
- [PATCH v5 3/4] serial: sh-sci: Fix fallback to PIO in sci_dma_rx_complete()
- [PATCH v5 2/4] serial: sh-sci: Extract sci_dma_rx_reenable_irq()
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [PATCH] serial: sh-sci: Fix warning of 'flags' may be used uninitialized
- Re: [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [PATCH 4.20 001/145] panic: avoid deadlocks in re-entrant console drivers
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: Serial device with PCI class memory device (0x05)
- Re: [BUG] tty: serial: mxs-auart: possible concurrency use-after-free bugs in mxs_auart_dma_exit_channel()
- Serial device with PCI class memory device (0x05)
- Re: [BUG] tty: serial: mxs-auart: possible concurrency use-after-free bugs in mxs_auart_dma_exit_channel()
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH] serial: lantiq: Do not swap register read/writes
- [PATCH] serial: lantiq: Do not swap register read/writes
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- [PATCH] serial: max310x: Use struct_size() in devm_kzalloc()
- From: Gustavo A. R. Silva
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- Re: [PATCH 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- Re: [PATCH 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- Re: [PATCH 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH] sc16is7xx: Use struct_size() in devm_kzalloc()
- From: Gustavo A. R. Silva
- Re: pty for real device ?
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: pty for real device ?
- [PATCH RFC lora-next 0/5] net: lora: sx130x: USB CDC Picocell Gateway serdev driver via fake DT nodes
- [PATCH lora-next 2/5] net: lora: sx130x: Prepare storing driver-specific data
- [PATCH lora-next 1/5] net: lora: sx130x: Factor out SPI specific parts
- [PATCH lora-next 3/5] net: lora: sx130x: Add PicoCell serdev driver
- [PATCH RFC 4/5] usb: cdc-acm: Enable serdev support
- [RFC lora-next 5/5] HACK: net: lora: sx130x: Add PicoCell gateway shim for cdc-acm
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- Re: pty for real device ?
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- pty for real device ?
- Re: [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- packet mode in pty
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH 3/4] tty: serial: qcom_geni_serial: Remove xfer_mode variable
- [PATCH 4/4] tty: serial: qcom_geni_serial: Use u32 for register variables
- [PATCH 1/4] tty: serial: qcom_geni_serial: Remove use of *_relaxed() and mb()
- [PATCH 2/4] tty: serial: qcom_geni_serial: Remove set_rfr_wm() and related variables
- [PATCH 0/4] tty: serial: qcom_geni_serial: Assorted cleanups
- [PATCH v9 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v9 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v9 0/2] add uart DMA function
- Re: [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- From: Manivannan Sadhasivam
- Re: [PATCH v7 00/11] Add initial RDA8810PL SoC and Orange Pi boards support
- [PATCH v8 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v8 0/2] add uart DMA function
- [PATCH v8 2/2] arm: dts: mt2712: add uart APDMA to device tree
- Re: [GIT PULL] TTY/Serial patches for 4.21-rc1
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- Re: [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [GIT PULL] TTY/Serial patches for 4.21-rc1
- Re: [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH 4.19 30/46] panic: avoid deadlocks in re-entrant console drivers
- [PATCH 4.14 28/36] panic: avoid deadlocks in re-entrant console drivers
- [PATCH 4.9 20/22] panic: avoid deadlocks in re-entrant console drivers
- [PATCH v5 1/6] irqchip/mtk-sysirq: support 4 interrupt parameters for sysirq
- [PATCH v5 5/6] dt-bindings: pinctrl: mt8183: add binding document
- [PATCH v5 4/6] dt-bindings: serial: Add compatible for Mediatek MT8183
- [PATCH v5 6/6] arm64: dts: Add Mediatek SoC MT8183 and evaluation board dts and Makefile
- [PATCH v5 3/6] dt-bindings: mtk-sysirq: Add compatible for Mediatek MT8183
- [PATCH v5 2/6] dt-bindings: arm: Add bindings for Mediatek MT8183 SoC Platform
- [PATCH v5 0/6] Add basic and clock support for Mediatek MT8183 SoC
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- [PATCH AUTOSEL 3.18 12/12] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.4 21/21] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.9 35/35] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.14 59/59] serial/sunsu: fix refcount leak
- [PATCH AUTOSEL 4.19 96/97] serial/sunsu: fix refcount leak
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH 07/14] clock: milbeaut: Add Milbeaut M10V clock control
- [PATCH] tty: pass return value of spi_register_driver
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- Re: [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v7 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v7 0/2] add uart DMA function
- [PATCH v7 2/2] arm: dts: mt2712: add uart APDMA to device tree
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- bug report: serial: 8250: Rate limit serial port rx interrupts during input overruns
- Re: [PATCH v3 00/12] serial: Add Tegra Combined UART driver
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH] serial/sunsu: fix refcount leak
- Re: [PATCH] serial/sunsu: fix refcount leak
- Re: [PATCH v2 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH v2 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH] serial: clps711x: Remove board support
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 3/4] tty: serial: samsung: Increase maximum baudrate
- Re: [PATCH 1/4] mfd: exynos-lpass: Enable UART module support
- [PATCH] Revert "serial: 8250: Default SERIAL_OF_PLATFORM to SERIAL_8250"
- Re: [GIT PULL] TTY/Serial fixes for 4.20-rc8
- [GIT PULL] TTY/Serial fixes for 4.20-rc8
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- [PATCH 1/2] serial: sccnxp: Adds a delay between sequential read/write cycles
- [PATCH 2/2] serial: sccnxp: Allow to use non-standard baud rates
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- [PATCH] tty: serial: qcom_geni_serial: Fix UART hang
- Re: [PATCH v1 1/4] dt-bindings: sc16is7xx: Add alternative clock-frequence property
- Re: [PATCH v2 0/4] serial: uartps: Driver updates
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- Re: [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- [PATCH] tty: serial: qcom_geni_serial: Fix wrap around of TX buffer
- [PATCH] serial: max310x: Fix tx_empty() callback
- Re: [PATCH v2 1/2] dt-bindings: serial: sh-sci: Document r8a774a1 bindings
- [PATCH v2 resend 2/2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- [PATCH v2 1/2] dt-bindings: serial: sh-sci: Document r8a774a1 bindings
- [PATCH v2 resend 0/2] RZ/G2[EM] SCIF and HSCIF documentation
- RE: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v2] dt-bindings: serial: sh-sci: Document r8a774c0 bindings
- Re: [PATCH v6 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v6 1/2] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
- [PATCH v6 2/2] arm: dts: mt2712: add uart APDMA to device tree
- [PATCH v6 0/2] add uart DMA function
- Re: [PATCH] Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
- Re: [PATCH v2 1/2] Bluetooth: hci_h5: Add suspend / resume ops
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]
[Linux Kernel for ARM]