[PATCH v6 34/49] serial: ucc_uart: access __be32 field using be32_to_cpu

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The buf member of struct qe_bd is a __be32, so to make this work on
little-endian hosts, use be32_to_cpu when reading it.

Reviewed-by: Timur Tabi <timur@xxxxxxxxxx>
Acked-by: Timur Tabi <timur@xxxxxxxxxx>
Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
---
 drivers/tty/serial/ucc_uart.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 9436b93d5cfa..afc2a5d69202 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -343,7 +343,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 		/* Pick next descriptor and fill from buffer */
 		bdp = qe_port->tx_cur;
 
-		p = qe2cpu_addr(bdp->buf, qe_port);
+		p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
 
 		*p++ = port->x_char;
 		qe_iowrite16be(1, &bdp->length);
@@ -371,7 +371,7 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 	while (!(qe_ioread16be(&bdp->status) & BD_SC_READY) &&
 	       (xmit->tail != xmit->head)) {
 		count = 0;
-		p = qe2cpu_addr(bdp->buf, qe_port);
+		p = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
 		while (count < qe_port->tx_fifosize) {
 			*p++ = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -491,7 +491,7 @@ static void qe_uart_int_rx(struct uart_qe_port *qe_port)
 		}
 
 		/* get pointer */
-		cp = qe2cpu_addr(bdp->buf, qe_port);
+		cp = qe2cpu_addr(be32_to_cpu(bdp->buf), qe_port);
 
 		/* loop through the buffer */
 		while (i-- > 0) {
-- 
2.23.0




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux