Linux Serial

• Thread Index

• [PATCH AUTOSEL 4.9 240/251] tty: serial: imx: use the sg count from dma_map_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.9 241/251] tty: serial: pch_uart: correct usage of dma_unmap_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 166/174] tty: serial: pch_uart: correct usage of dma_unmap_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 165/174] tty: serial: imx: use the sg count from dma_map_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 351/371] tty: serial: imx: use the sg count from dma_map_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 352/371] tty: serial: pch_uart: correct usage of dma_unmap_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 371/371] serial: stm32: fix clearing interrupt error flags
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 646/671] tty: serial: pch_uart: correct usage of dma_unmap_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 645/671] tty: serial: imx: use the sg count from dma_map_sg
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 670/671] serial: stm32: fix clearing interrupt error flags
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 138/205] tty: serial: imx: use the sg count from dma_map_sg
  • From: Sasha Levin
• Re: [PATCH 0/6] Raspberry Pi auxiliary UART fixes & cleanups
  • From: Nicolas Saenz Julienne
• Re: [PATCH] tty: serial: amba-pl011: added RS485 support
  • From: Lukas Wunner
• Re: [PATCH 4/6] serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
  • From: Matthias Brugger
• Re: [PATCH 6/6] serial: 8250_bcm2835aux: Document struct bcm2835aux_data
  • From: Matthias Brugger
• Re: [PATCH 3/6] serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
  • From: Matthias Brugger
• Re: [PATCH 2/6] serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
  • From: Matthias Brugger
• [PATCH 2/6] serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
  • From: Lukas Wunner
• [PATCH 1/6] serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
  • From: Lukas Wunner
• [PATCH 6/6] serial: 8250_bcm2835aux: Document struct bcm2835aux_data
  • From: Lukas Wunner
• [PATCH 5/6] serial: 8250_bcm2835aux: Use generic remapping code
  • From: Lukas Wunner
• [PATCH 4/6] serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
  • From: Lukas Wunner
• [PATCH 3/6] serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
  • From: Lukas Wunner
• [PATCH 0/6] Raspberry Pi auxiliary UART fixes & cleanups
  • From: Lukas Wunner
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Greg Kroah-Hartman
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Greg Kroah-Hartman
• Re: [PATCHv2-next 1/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Greg Kroah-Hartman
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Dmitry Safonov
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Joe Perches
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Greg Kroah-Hartman
• Re: [PATCHv2-next 2/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Randy Dunlap
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Dmitry Safonov
• Re: [PATCHv2-next 2/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Joe Perches
• Re: [PATCHv2-next 2/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Joe Perches
• [PATCHv2-next 3/3] serial_core: Remove unused member in uart_port
  • From: Dmitry Safonov
• [PATCHv2-next 2/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• [PATCHv2-next 1/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Dmitry Safonov
• [PATCHv2-next 0/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCH] tty: serial: msm_serial: RX SW/FIFO mode fallback
  • From: Jeffrey Hugo
• [PATCH 2/2] dt-bindings: serial: Convert STM32 UART to json-schema
  • From: Benjamin Gaignard
• [PATCH 1/2] dt-bindings: serial: Convert rs485 bindings to json-schema
  • From: Benjamin Gaignard
• [PATCH 0/2] Convert STM32 UART bindings to yaml
  • From: Benjamin Gaignard
• Re: [PATCH] tty: serial: msm_serial: RX SW/FIFO mode fallback
  • From: Loic Poulain
• Re: [PATCH] tty: serial: msm_serial: RX SW/FIFO mode fallback
  • From: Jeffrey Hugo
• [PATCH v1 2/2] tty: serial: tegra: Optimize DMA buffer synchronization
  • From: Dmitry Osipenko
• [PATCH v1 1/2] tty: serial: tegra: Activate RX DMA transfer by request
  • From: Dmitry Osipenko
• [PATCH v1 0/2] NVIDIA Tegra serial driver improvements
  • From: Dmitry Osipenko
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc6
  • From: pr-tracker-bot
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Joe Perches
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: kbuild test robot
• [PATCH] serial: 8250: Support disabling mdelay-filled probes of 16550A variants
  • From: Josh Triplett
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• Re: [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Greg Kroah-Hartman
• Re: [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Dmitry Safonov
• Re: [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Dmitry Safonov
• [GIT PULL] TTY/Serial driver fixes for 5.5-rc6
  • From: Greg KH
• Re: [PATCH v12 0/3] Use MFD framework for SGI IOC3 drivers
  • From: Paul Burton
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: kbuild test robot
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: kbuild test robot
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Joe Perches
• Re: [PATCH-next 1/3] serial_core: Move sysrq functions from header file
  • From: Greg Kroah-Hartman
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Greg Kroah-Hartman
• Re: [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Greg Kroah-Hartman
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Johan Hovold
• [PATCH] tty: serial: msm_serial: RX SW/FIFO mode fallback
  • From: Loic Poulain
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: Greg KH
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: rishi gupta
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: Greg KH
• Re: [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Iurii Zaikin
• Re: [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Randy Dunlap
• [PATCH-next 3/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• [PATCH-next 2/3] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Dmitry Safonov
• [PATCH-next 1/3] serial_core: Move sysrq functions from header file
  • From: Dmitry Safonov
• [PATCH-next 0/3] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• [PATCH v12 0/3] Use MFD framework for SGI IOC3 drivers
  • From: Thomas Bogendoerfer
• [PATCH v12 3/3] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Thomas Bogendoerfer
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: rishi gupta
• Re: [PATCH v1 3/3] tty: documentation: abi: add ttyvs null modem driver sysfs nodes
  • From: rishi gupta
• Re: [PATCH v1 0/3] Add virtual serial null modem emulation driver
  • From: rishi gupta
• Re: [PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
  • From: Richard Genoud
• Re: [PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
  • From: Uwe Kleine-König
• Re: [PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
  • From: Codrin.Ciubotariu
• Re: [PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
  • From: Richard Genoud
• Re: 4.12 mainline crash in n_tty_receive_buf_common when using g_serial
  • From: Greg KH
• Re: 4.12 mainline crash in n_tty_receive_buf_common when using g_serial
  • From: Belisko Marek
• Re: 4.12 mainline crash in n_tty_receive_buf_common when using g_serial
  • From: Greg KH
• 4.12 mainline crash in n_tty_receive_buf_common when using g_serial
  • From: Belisko Marek
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• Re: [PATCHv2] serial: uartps: Add monitoring TACTIVE bit in set_termios
  • From: Johan Hovold
• [PATCHv2] serial: uartps: Add monitoring TACTIVE bit in set_termios
  • From: shubhrajyoti . datta
• [PATCH] serial: uartps: Add monitoring TACTIVE bit in set_termios
  • From: shubhrajyoti . datta
• [PATCH] tty/serial: atmel: RS485 & ISO7816: wait for TXRDY before sending data
  • From: Codrin.Ciubotariu
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Pavel Machek
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH] tty: serial: amba-pl011: added RS485 support
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: serial: amba-pl011: added RS485 support
  • From: Greg Kroah-Hartman
• Re: [PATCH 2/2] tty: serial: Kconfig: Allow SERIAL_QCOM_GENI_CONSOLE to be enabled if SERIAL_QCOM_GENI is a module
  • From: Bjorn Andersson
• [PATCH] tty: serial: amba-pl011: added RS485 support
  • From: Ivan Sistik
• [PATCH 2/2] tty: serial: Kconfig: Allow SERIAL_QCOM_GENI_CONSOLE to be enabled if SERIAL_QCOM_GENI is a module
  • From: John Stultz
• [PATCH 1/2] tty: serial_core: Export uart_console_device so it can be used by modules
  • From: John Stultz
• Re: [PATCH] tty: st-asc: switch to using devm_gpiod_get()
  • From: Dmitry Torokhov
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: kbuild test robot
• Re: [PATCH v1 0/3] Add virtual serial null modem emulation driver
  • From: H. Peter Anvin
• Re: [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: Greg KH
• Re: [PATCH v1 3/3] tty: documentation: abi: add ttyvs null modem driver sysfs nodes
  • From: Greg KH
• Re: [PATCH v1 0/3] Add virtual serial null modem emulation driver
  • From: Greg KH
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• Re: [PATCH] tty: st-asc: switch to using devm_gpiod_get()
  • From: Greg Kroah-Hartman
• [PATCH V8 2/2] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
  • From: Akash Asthana
• [PATCH V8 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
  • From: Akash Asthana
• [PATCH V8 0/2] Cleanup wakeup IRQ and move loopback to TIOCM_LOOP
  • From: Akash Asthana
• Re: [PATCH] serdev: Don't claim unsupported ACPI serial devices
  • From: Punit Agrawal
• [PATCH v1 3/3] tty: documentation: abi: add ttyvs null modem driver sysfs nodes
  • From: Rishi Gupta
• [PATCH v1 2/3] tty/serial: ttvys: add null modem driver emulating serial port
  • From: Rishi Gupta
• [PATCH v1 1/3] dt-bindings: ttyvs: document serial null modem driver dt bindings
  • From: Rishi Gupta
• [PATCH v1 0/3] Add virtual serial null modem emulation driver
  • From: Rishi Gupta
• [PATCH] tty: st-asc: switch to using devm_gpiod_get()
  • From: Dmitry Torokhov
• [PATCH v2 17/20] serial: samsung: Rename Exynos to lowercase
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: st-asc: switch to using devm_fwnode_gpiod_get()
  • From: kbuild test robot
• Re: [PATCH] tty: st-asc: switch to using devm_fwnode_gpiod_get()
  • From: Dmitry Torokhov
• [PATCH 16/19] serial: samsung: Rename Exynos to lowercase
  • From: Krzysztof Kozlowski
• [PATCH] tty: st-asc: switch to using devm_fwnode_gpiod_get()
  • From: Dmitry Torokhov
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Sudip Mukherjee
• [PATCH AUTOSEL 4.9 16/38] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 09/25] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 26/57] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Sasha Levin
• [PATCH AUTOSEL 5.4 084/187] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 39/84] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Sasha Levin
• Re: [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Leo Yan
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Leo Yan
• possible deadlock in uart_write
  • From: syzbot
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Sudip Mukherjee
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Greg KH
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH v4 0/3] tty/leds: implement a trigger for ttys
  • From: Uwe Kleine-König
• Re: [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Pavel Machek
• Re: [PATCH v4 0/3] tty/leds: implement a trigger for ttys
  • From: Pavel Machek
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: pr-tracker-bot
• Re: [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Linus Torvalds
• Re: [PATCH] serial: ucc_uart: remove redundant assignment to pointer bdp
  • From: Timur Tabi
• [GIT PULL] TTY/Serial driver fixes for 5.5-rc3
  • From: Greg KH
• [PATCH V2 3/3] tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP
  • From: Peng Fan
• [PATCH V2 2/3] tty: serial: fsl_lpuart: support UPIO_MEM32 for lpuart32
  • From: Peng Fan
• [PATCH V2 1/3] tty: serial: fsl_lpuart: drop EARLYCON_DECLARE
  • From: Peng Fan
• [PATCH V2 0/3] tty: serial: lpuart: cleanup and improve for earlycon
  • From: Peng Fan
• [PATCH] serial: ucc_uart: remove redundant assignment to pointer bdp
  • From: Colin King
• Re: [tty:tty-testing 23/75] drivers/tty/serial/21285.c:44:41: error: subscripted value is neither array nor pointer nor vector
  • From: Dmitry Safonov
• Re: [PATCH 2/3] tty: serial: lpuart: support UPIO_MEM32 for lpuart32
  • From: gregkh@xxxxxxxxxxxxxxxxxxx
• [PATCH v2] tty: serial: 21285: stop using the unused[] variable from struct uart_port
  • From: Greg Kroah-Hartman
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Andy Shevchenko
• [PATCH] serdev: Don't claim unsupported ACPI serial devices
  • From: Punit Agrawal
• [PATCH v5 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• [PATCH v5 2/3] tty: new helper function tty_get_icount()
  • From: Uwe Kleine-König
• [PATCH v5 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Uwe Kleine-König
• [PATCH v5 0/3] tty/leds: implement a trigger for ttys
  • From: Uwe Kleine-König
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Chen Gang
• Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Thomas Bogendoerfer
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Marc Gonzalez
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Punit Agrawal
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Johan Hovold
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Rafael J. Wysocki
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Hans de Goede
• Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Linus Walleij
• [PATCH] tty: serial: 21285: stop using the unused[] variable from struct uart_port
  • From: Greg Kroah-Hartman
• Re: [tty:tty-testing 23/75] drivers/tty/serial/21285.c:44:41: error: subscripted value is neither array nor pointer nor vector
  • From: Greg Kroah-Hartman
• [tty:tty-testing 23/75] drivers/tty/serial/21285.c:44:41: error: subscripted value is neither array nor pointer nor vector
  • From: kbuild test robot
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Punit Agrawal
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Jacek Anaszewski
• Re: [PATCH] Revert "serdev: simplify Makefile"
  • From: Johan Hovold
• Re: [PATCH] Revert "serdev: simplify Makefile"
  • From: Greg Kroah-Hartman
• [PATCH] Revert "serdev: simplify Makefile"
  • From: Johan Hovold
• RE: [PATCH 2/3] tty: serial: lpuart: support UPIO_MEM32 for lpuart32
  • From: Peng Fan
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Hans de Goede
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Punit Agrawal
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Johan Hovold
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Punit Agrawal
• Re: [PATCH] serdev: Don't claim unsupported serial devices
  • From: Greg Kroah-Hartman
• [PATCH] serdev: Don't claim unsupported serial devices
  • From: Punit Agrawal
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• [PATCH 2/3] tty: serial: fsl_lpuart: support UPIO_MEM32 for lpuart32
  • From: Peng Fan
• [PATCH 3/3] tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP
  • From: Peng Fan
• [PATCH 2/3] tty: serial: lpuart: support UPIO_MEM32 for lpuart32
  • From: Peng Fan
• [PATCH 1/3] tty: serial: fsl_lpuart: drop EARLYCON_DECLARE
  • From: Peng Fan
• [PATCH 0/3] tty: serial: lpuart: cleanup and improve for earlycon
  • From: Peng Fan
• [tty:tty-testing 16/73] ERROR: "__serdev_device_driver_register" [drivers/gnss/gnss-mtk.ko] undefined!
  • From: kbuild test robot
• [tty:tty-testing 25/73] arch/powerpc/kernel/legacy_serial.c:484:7: error: 'struct plat_serial8250_port' has no member named 'has_sysrq'
  • From: kbuild test robot
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Tetsuo Handa
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Jacek Anaszewski
• Re: [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Jacek Anaszewski
• Re: [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Uwe Kleine-König
• Re: [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Greg Kroah-Hartman
• Re: [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Jacek Anaszewski
• Re: [PATCH v4 0/3] tty/leds: implement a trigger for ttys
  • From: Greg Kroah-Hartman
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• [PATCH v4 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Uwe Kleine-König
• [PATCH v4 2/3] tty: new helper function tty_get_icount()
  • From: Uwe Kleine-König
• [PATCH v4 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• [PATCH v4 0/3] tty/leds: implement a trigger for ttys
  • From: Uwe Kleine-König
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH] tty: serial: samsung_tty: do not abuse the struct uart_port unused fields
  • From: Dmitry Safonov
• Re: [PATCH] tty: serial: samsung_tty: do not abuse the struct uart_port unused fields
  • From: Greg Kroah-Hartman
• Re: [PATCH 54/58] serial_core: Remove SUPPORT_SYSRQ ifdeffery
  • From: Dmitry Safonov
• Re: [PATCH] tty: serial: samsung_tty: do not abuse the struct uart_port unused fields
  • From: Dmitry Safonov
• Re: [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• [PATCH v3 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• [PATCH v3 2/3] tty: new helper function tty_get_icount()
  • From: Uwe Kleine-König
• [PATCH v3 1/3] tty: rename tty_kopen() and add new function tty_kopen_shared()
  • From: Uwe Kleine-König
• [PATCH v3 0/3] tty/leds: implement a trigger for ttys
  • From: Uwe Kleine-König
• Re: [PATCH 54/58] serial_core: Remove SUPPORT_SYSRQ ifdeffery
  • From: Greg Kroah-Hartman
• [PATCH] tty: serial: samsung_tty: do not abuse the struct uart_port unused fields
  • From: Greg Kroah-Hartman
• Re: [PATCH 03/58] serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
  • From: Greg Kroah-Hartman
• Re: [PATCH 03/58] serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/3] tty: new helper function tty_kopen_shared
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH v2 1/3] tty: new helper function tty_kopen_shared
  • From: Uwe Kleine-König
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• Re: [PATCH v2 0/3] tty/leds: implement a trigger for ttys
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 3/3] leds: trigger: implement a tty trigger
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 2/3] tty: new helper function tty_get_icount()
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 1/3] tty: new helper function tty_kopen_shared
  • From: Greg Kroah-Hartman
• [PATCH v2 1/3] tty: new helper function tty_kopen_shared
  • From: Uwe Kleine-König
• [PATCH v2 0/3] tty/leds: implement a trigger for ttys
  • From: Uwe Kleine-König
• [PATCH v2 2/3] tty: new helper function tty_get_icount()
  • From: Uwe Kleine-König
• [PATCH v2 3/3] leds: trigger: implement a tty trigger
  • From: Uwe Kleine-König
• Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Lee Jones
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Chen Gang
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Jeffrey Hugo
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Jeffrey Hugo
• Re: [PATCH 33/58] serial/f81534: Don't check port->sysrq
  • From: Dmitry Safonov
• Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Thomas Bogendoerfer
• Re: [PATCH 33/58] serial/f81534: Don't check port->sysrq
  • From: Johan Hovold
• Re: [PATCH v3] tty/serial: atmel: fix out of range clock divider handling
  • From: Ludovic Desroches
• Re: [PATCH v3] tty/serial: atmel: fix out of range clock divider handling
  • From: Richard Genoud
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Andy Shevchenko
• [PATCH v3] tty/serial: atmel: fix out of range clock divider handling
  • From: David Engraf
• Re: [PATCH v6 6/8] soc: mediatek: add MT6765 scpsys and subdomain support
  • From: Matthias Brugger
• Re: [PATCH v2] tty/serial: atmel: fix out of range clock divider handling
  • From: David Engraf
• Re: [RFC 0/1] serdes: Add whitelist to bring back missing serial port
  • From: Punit Agrawal
• Re: [RFC 0/1] serdes: Add whitelist to bring back missing serial port
  • From: Hans de Goede
• [RFC ] serdev: Only claim supported devices
  • From: Punit Agrawal
• [RFC 0/1] serdes: Add whitelist to bring back missing serial port
  • From: Punit Agrawal
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Chen Gang
• Re: [PATCH 42/58] tty/serial: Migrate sprd_serial to use has_sysrq
  • From: Chunyan Zhang
• Re: [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Jakub Kicinski
• Re: [PATCH v6 6/8] soc: mediatek: add MT6765 scpsys and subdomain support
  • From: Matthias Brugger
• Re: [PATCH v6 3/8] dt-bindings: mediatek: add MT6765 power dt-bindings
  • From: Matthias Brugger
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Tetsuo Handa
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Tetsuo Handa
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Tetsuo Handa
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: [PATCH v2] tty/serial: atmel: fix out of range clock divider handling
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Tetsuo Handa
• [PATCH v2] tty/serial: atmel: fix out of range clock divider handling
  • From: David Engraf
• Re: [PATCH] tty/serial: atmel: fix out of range clock divider handling
  • From: David Engraf
• [PATCH v11 net-next 1/2] MIPS: SGI-IP27: fix readb/writeb addressing
  • From: Thomas Bogendoerfer
• [PATCH v11 net-next 2/2] mfd: ioc3: Add driver for SGI IOC3 chip
  • From: Thomas Bogendoerfer
• [PATCH v11 net-next 0/2] Use MFD framework for SGI IOC3 drivers
  • From: Thomas Bogendoerfer
• Re: [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: Andy Shevchenko
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• Re: [PATCH] tty/serial: atmel: fix out of range clock divider handling
  • From: Richard Genoud
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem16_serial_out
  • From: Dmitry Vyukov
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Dmitry Vyukov
• Re: [PATCH 03/58] serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
  • From: Greg Kroah-Hartman
• Re: [PATCH 02/58] serial: Move sysrq members above
  • From: Greg Kroah-Hartman
• [PATCH] drivers: tty: serial: 8250: fintek: Can enable or disable irq sharing based on isa or pci bus
  • From: chengang
• Re: [PATCH 04/58] tty/serial: Migrate aspeed_vuart to use has_sysrq
  • From: Andrew Jeffery
• [PATCH 08/58] tty/serial: Migrate 8250_port to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 12/58] tty/serial: Migrate atmel_serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 20/58] tty/serial: Migrate ip22zilog to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 22/58] tty/serial: Migrate milbeaut_usio to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 24/58] tty/serial: Don't zero port->sysrq
  • From: Dmitry Safonov
• [PATCH 23/58] tty/serial: Migrate mpc52xx_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 28/58] tty/serial: Migrate omap-serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 19/58] tty/serial: Migrate imx to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 13/58] tty/serial: Migrate clps711x to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 09/58] tty/serial: Migrate amba-pl01* to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 33/58] serial/f81534: Don't check port->sysrq
  • From: Dmitry Safonov
• [PATCH 39/58] tty/serial: Migrate sccnxp to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 38/58] tty/serial: Migrate sb1250-duart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 37/58] tty/serial: Migrate samsung_tty to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 31/58] tty/serial: Migrate pmac_zilog to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 43/58] tty/serial: Migrate st-asc to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 42/58] tty/serial: Migrate sprd_serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 46/58] tty/serial: Migrate sunsab to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 49/58] serial/ucc_uart: Remove ifdef SUPPORT_SYSRQ
  • From: Dmitry Safonov
• [PATCH 50/58] tty/serial: Migrate vr41xx_siu to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 56/58] serial_core: Move sysrq functions from header file
  • From: Dmitry Safonov
• [PATCH 52/58] tty/serial: Migrate xilinx_uartps to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 47/58] tty/serial: Migrate sunsu to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 58/58] serial/sysrq: Add MAGIC_SYSRQ_SERIAL_SEQUENCE
  • From: Dmitry Safonov
• [PATCH 57/58] sysctl/sysrq: Remove __sysrq_enabled copy
  • From: Dmitry Safonov
• [PATCH 55/58] usb/serial: Don't handle break when CONFIG_MAGIC_SYSRQ is disabled
  • From: Dmitry Safonov
• [PATCH 54/58] serial_core: Remove SUPPORT_SYSRQ ifdeffery
  • From: Dmitry Safonov
• [PATCH 53/58] tty/serial: Migrate zs to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 51/58] tty/serial: Migrate vt8500_serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 48/58] tty/serial: Migrate sunzilog to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 45/58] tty/serial: Migrate sunhv to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 44/58] tty/serial: Migrate stm32-usart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 41/58] tty/serial: Migrate sh-sci to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 40/58] tty/serial: Migrate serial_txx9 to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 36/58] tty/serial: Migrate sa1100 to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 35/58] tty/serial: Migrate qcom_geni_serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 34/58] tty/serial: Migrate pxa to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 32/58] tty/serial: Migrate pnx8xxx_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 30/58] tty/serial: Don't check port->sysrq
  • From: Dmitry Safonov
• [PATCH 29/58] tty/serial: Migrate pch_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 27/58] tty/serial: Migrate mxs-auart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 26/58] tty/serial: Migrate mux to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 25/58] tty/serial: Migrate msm_serial to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 21/58] tty/serial: Migrate meson_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 17/58] tty/serial: Migrate fsl_linflexuart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 16/58] tty/serial: Migrate efm32-uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 18/58] tty/serial: Migrate fsl_lpuart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 15/58] tty/serial: Migrate dz to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 14/58] tty/serial: Migrate cpm_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 11/58] tty/serial: Migrate arc_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 10/58] tty/serial: Migrate apbuart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 07/58] tty/serial: Migrate 8250_omap to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 06/58] tty/serial: Migrate bcm63xx_uart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 05/58] tty/serial: Migrate 8250_fsl to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 04/58] tty/serial: Migrate aspeed_vuart to use has_sysrq
  • From: Dmitry Safonov
• [PATCH 03/58] serial_core: Un-ifdef sysrq SUPPORT_SYSRQ
  • From: Dmitry Safonov
• [PATCH 02/58] serial: Move sysrq members above
  • From: Dmitry Safonov
• [PATCH 01/58] sysrq: Remove sysrq_handler_registered
  • From: Dmitry Safonov
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Greg Kroah-Hartman
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Christoph Hellwig
• [PATCH] tty: link tty and port before configuring it as console
  • From: Sudip Mukherjee
• Re: [PATCH 10/10] tty: serial: samsung_tty: fix blank line checkpatch warning
  • From: Greg Kroah-Hartman
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Greg Kroah-Hartman
• Re: [PATCH 03/10] tty: serial: samsung.h: fix up minor comment issues
  • From: Greg Kroah-Hartman
• Re: BUG: unable to handle kernel NULL pointer dereference in mem16_serial_out
  • From: Greg KH
• Re: BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: Greg KH
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Greg KH
• [PATCH 1/2] serdev: simplify Makefile
  • From: Uwe Kleine-König
• [PATCH 2/2] serdev: make use of printk extension %pe for better error messages
  • From: Uwe Kleine-König
• [PATCH] tty/serial: atmel: fix out of range clock divider handling
  • From: David Engraf
• Re: [PATCH 02/10] tty: serial: samsung_tty: fix build warning
  • From: Greg Kroah-Hartman
• Re: [PATCH 02/10] tty: serial: samsung_tty: fix build warning
  • From: Enrico Weigelt, metux IT consult
• Re: [PATCH 09/10] tty: serial: samsung_tty: fix up minor comment formatting
  • From: Krzysztof Kozlowski
• Re: [PATCH 10/10] tty: serial: samsung_tty: fix blank line checkpatch warning
  • From: Krzysztof Kozlowski
• Re: [PATCH 03/10] tty: serial: samsung.h: fix up minor comment issues
  • From: Krzysztof Kozlowski
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Marc Gonzalez
• Re: [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Krzysztof Kozlowski
• Re: [PATCH 07/10] tty: serial: samsung_tty: use standard debugging macros
  • From: Krzysztof Kozlowski
• Re: [PATCH 01/10] tty: serial: samsung: allow driver to be built by anyone
  • From: Greg Kroah-Hartman
• Re: [PATCH 06/10] tty: serial: samsung_tty: drop unneded dbg() calls
  • From: Krzysztof Kozlowski
• Re: [PATCH 05/10] tty: serial: samsung_tty: delete samsung.h
  • From: Krzysztof Kozlowski
• Re: [PATCH 04/10] tty: serial: samsung.h: remove reset_port callback from struct s3c24xx_uart_info
  • From: Krzysztof Kozlowski
• Re: [PATCH 02/10] tty: serial: samsung_tty: fix build warning
  • From: Krzysztof Kozlowski
• Re: [PATCH 01/10] tty: serial: samsung: allow driver to be built by anyone
  • From: Krzysztof Kozlowski
• [PATCH 08/10] tty: serial: samsung_tty: use 'unsigned int' not 'unsigned'
  • From: Greg Kroah-Hartman
• [PATCH 07/10] tty: serial: samsung_tty: use standard debugging macros
  • From: Greg Kroah-Hartman
• [PATCH 04/10] tty: serial: samsung.h: remove reset_port callback from struct s3c24xx_uart_info
  • From: Greg Kroah-Hartman
• [PATCH 09/10] tty: serial: samsung_tty: fix up minor comment formatting
  • From: Greg Kroah-Hartman
• [PATCH 10/10] tty: serial: samsung_tty: fix blank line checkpatch warning
  • From: Greg Kroah-Hartman
• [PATCH 05/10] tty: serial: samsung_tty: delete samsung.h
  • From: Greg Kroah-Hartman
• [PATCH 06/10] tty: serial: samsung_tty: drop unneded dbg() calls
  • From: Greg Kroah-Hartman
• [PATCH 03/10] tty: serial: samsung.h: fix up minor comment issues
  • From: Greg Kroah-Hartman
• [PATCH 01/10] tty: serial: samsung: allow driver to be built by anyone
  • From: Greg Kroah-Hartman
• [PATCH 02/10] tty: serial: samsung_tty: fix build warning
  • From: Greg Kroah-Hartman
• Re: BUG: unable to handle kernel NULL pointer dereference in mem16_serial_out
  • From: syzbot
• BUG: unable to handle kernel NULL pointer dereference in mem16_serial_out
  • From: syzbot
• Re: [PATCH] MAINTAINERS: Include Samsung SoC serial driver in Samsung entry
  • From: Krzysztof Kozlowski
• [PATCH] tty: pl011: Add suspend resume support
  • From: shubhrajyoti . datta
• BUG: unable to handle kernel NULL pointer dereference in mem_serial_out
  • From: syzbot
• [PATCH] tty: serial: amba-pl011: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: serial: samsung: support driver modulization
  • From: Krzysztof Kozlowski
• [PATCH v2] tty: omap-serial: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: omap-serial: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: omap-serial: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: serial: samsung: support driver modulization
  • From: 'Greg KH'
• RE: [PATCH] tty: serial: samsung: support driver modulization
  • From: 구현기/HYUN-KI KOO
• [PATCH] MAINTAINERS: Include Samsung SoC serial driver in Samsung entry
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: serial: samsung: support driver modulization
  • From: Greg KH
• Re: [PATCH] tty: serial: samsung: support driver modulization
  • From: Krzysztof Kozlowski
• Re: [PATCH] tty: omap-serial: remove set but unused variable
  • From: Jiri Slaby
• Re: [PATCH] tty: omap-serial: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: serial: 8250: remove set but unused variable
  • From: Greg KH
• [PATCH] tty: serial: 8250: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH] tty: omap-serial: remove set but unused variable
  • From: Greg KH
• [PATCH] tty: omap-serial: remove set but unused variable
  • From: Xiongfeng Wang
• Re: [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Doug Anderson
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Leo Yan
• [PATCH] serial: sprd: Add clearing break interrupt operation
  • From: Baolin Wang
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Jeffrey Hugo
• Re: [GIT PULL] TTY/Serial patches for 5.5-rc1
  • From: pr-tracker-bot
• [GIT PULL] TTY/Serial patches for 5.5-rc1
  • From: Greg KH
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Johan Hovold
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Guenter Roeck
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Geert Uytterhoeven
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Bartosz Golaszewski
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Leo Yan
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Guenter Roeck
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Guenter Roeck
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Bartosz Golaszewski
• Re: [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Jeffrey Hugo
• Re: [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Jeffrey Hugo
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Guenter Roeck
• Re: [PATCH v6 5/8] clk: mediatek: Add MT6765 clock support
  • From: Owen Chen
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Bartosz Golaszewski
• Re: [PATCH v4 1/2] drivers: move the early platform device support to arch/sh
  • From: Guenter Roeck
• Re: [PATCH] tty: serial: samsung: support driver modulization
  • From: Greg KH
• Re: [PATCH v2 2/4] litex: add common LiteX header
  • From: Mateusz Holenko
• [PATCH v6 30/49] serial: ucc_uart: factor out soft_uart initialization
  • From: Rasmus Villemoes
• [PATCH v6 31/49] serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
  • From: Rasmus Villemoes
• [PATCH v6 29/49] serial: ucc_uart: replace ppc-specific IO accessors
  • From: Rasmus Villemoes
• [PATCH v6 34/49] serial: ucc_uart: access __be32 field using be32_to_cpu
  • From: Rasmus Villemoes
• [PATCH v6 33/49] serial: ucc_uart: limit brg-frequency workaround to PPC32
  • From: Rasmus Villemoes
• [PATCH v6 32/49] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Rasmus Villemoes
• [PATCH v6 28/49] serial: ucc_uart: explicitly include soc/fsl/cpm.h
  • From: Rasmus Villemoes
• [PATCH v2 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Leo Yan
• [PATCH v2 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Leo Yan
• [PATCH v2 0/2] tty: serial: msm_serial: Fix lockup issues
  • From: Leo Yan
• [PATCH v2] Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  • From: Je Yen Tam
• Re: Re: [PATCH] Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  • From: Greg KH
• RE: Re: [PATCH] Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  • From: Je Yen Tam
• Re: [PATCH] Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  • From: Greg KH
• [PATCH] Revert "serial/8250: Add support for NI-Serial PXI/PXIe+485 devices"
  • From: Je Yen Tam
• Re: [PATCH V7 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
  • From: Akash Asthana
• Re: [EXT] Re: [PATCH tty/serial 1/1] tty: serial: imx: fix sysrq lockdep issue
  • From: Petr Mladek
• Re: [PATCH v2 2/4] litex: add common LiteX header
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 2/4] litex: add common LiteX header
  • From: Mateusz Holenko
• Re: [PATCH V7 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
  • From: Stephen Boyd
• [PATCH V7 2/2] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
  • From: Akash Asthana
• [PATCH V7 1/2] tty: serial: qcom_geni_serial: Wakeup IRQ cleanup
  • From: Akash Asthana
• [PATCH V7 0/2] Cleanup wakeup IRQ and move loopback to TIOCM_LOOP
  • From: Akash Asthana
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Michal Simek
• Re: [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• Re: [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• Re: [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Akash Asthana
• Re: [PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
  • From: Akash Asthana
• Re: [PATCH] tty: don't crash in tty_init_dev when missing tty_port
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] tty: add retry to tty_init_dev() to workaround a race condition
  • From: Dan Carpenter
• Re: possible deadlock in console_unlock
  • From: syzbot
• RE: [EXT] Re: [PATCH tty/serial 1/1] tty: serial: imx: fix sysrq lockdep issue
  • From: Andy Duan
• Re: [PATCH 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Leo Yan
• Re: [PATCH 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Jeffrey Hugo
• [PATCH 2/2] tty: serial: msm_serial: Fix deadlock caused by recursive output
  • From: Leo Yan
• [PATCH 1/2] tty: serial: msm_serial: Fix lockup for sysrq and oops
  • From: Leo Yan
• Re: [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Matthias Kaehlcke
• Re: [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Matthias Kaehlcke
• Re: [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Stephen Boyd
• Re: [PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
  • From: Stephen Boyd
• Re: [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Stephen Boyd
• Re: [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Stephen Boyd
• Re: [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
  • From: Stephen Boyd
• [PATCH v6 5/5] tty: serial: qcom_geni_serial: Move loopback support to TIOCM_LOOP
  • From: Akash Asthana
• [PATCH v6 4/5] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• [PATCH v6 3/5] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Akash Asthana
• [PATCH v6 2/5] Revert "tty: serial: qcom_geni_serial: IRQ cleanup"
  • From: Akash Asthana
• [PATCH v6 1/5] Revert "tty: serial: qcom_geni_serial: Wakeup over UART RX"
  • From: Akash Asthana
• [PATCH v6 0/5] Add wakeup support and move loopback to TIOCM_LOOP
  • From: Akash Asthana
• Re: [PATCH v2] tty: serial: samsung: remove variable 'ufstat' set but not used
  • From: Marek Szyprowski
• Re: [PATCH v2] tty: serial: samsung: remove variable 'ufstat' set but not used
  • From: Jiri Slaby
• [PATCH v2] tty: serial: samsung: remove variable 'ufstat' set but not used
  • From: Chen Wandun
• Re: [PATCH] {tty: serial, nand: onenand}: remove variable 'ufstat' set but not used
  • From: Greg KH
• Re: [PATCH] {tty: serial, nand: onenand}: remove variable 'ufstat' set but not used
  • From: Chen Wandun
• Re: [PATCH] {tty: serial, nand: onenand}: remove variable 'ufstat' set but not used
  • From: Greg KH
• [PATCH] {tty: serial, nand: onenand}: remove variable 'ufstat' set but not used
  • From: Chen Wandun
• Re: [PATCH tty/serial 1/1] tty: serial: imx: fix sysrq lockdep issue
  • From: Uwe Kleine-König
• [PATCH] tty: don't crash in tty_init_dev when missing tty_port
  • From: Jiri Slaby
• [PATCH tty/serial 1/1] tty: serial: lpuart: fix the sysrq lockdep issue
  • From: Andy Duan
• [PATCH tty/serial 1/1] tty: serial: imx: fix sysrq lockdep issue
  • From: Andy Duan
• Re: [PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
  • From: Akash Asthana
• Re: [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• [PATCH AUTOSEL 4.19 076/219] serial: sh-sci: Fix crash in rx_timer_fn() on PIO fallback
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 110/219] serial: max310x: Fix tx_empty() callback
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 175/219] serial: 8250: Fix serial8250 initialization crash
  • From: Sasha Levin
• [PATCH AUTOSEL 4.4 33/68] serial: max310x: Fix tx_empty() callback
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 057/127] serial: max310x: Fix tx_empty() callback
  • From: Sasha Levin
• [PATCH AUTOSEL 4.9 40/91] serial: max310x: Fix tx_empty() callback
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 103/127] serial: 8250: Fix serial8250 initialization crash
  • From: Sasha Levin
• [PATCH AUTOSEL 4.14 033/127] serial: 8250: Rate limit serial port rx interrupts during input overruns
  • From: Sasha Levin
• [PATCH AUTOSEL 4.19 079/219] serial: 8250: Rate limit serial port rx interrupts during input overruns
  • From: Sasha Levin
• Re: console output duplicated when registering additional consoles
  • From: Petr Mladek
• [PATCH] serial: stm32: fix clearing interrupt error flags
  • From: Fabrice Gasnier
• Re: [PATCH v2] tty: Fix Kconfig indentation
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] tty: Fix Kconfig indentation
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] tty: Fix Kconfig indentation
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: serial_core: Perform NULL checks for break_ctl ops
  • From: Greg KH
• [PATCH v2] tty: Fix Kconfig indentation
  • From: Krzysztof Kozlowski
• Re: [PATCH] serial: serial_core: Perform NULL checks for break_ctl ops
  • From: Jiangfeng Xiao
• Re: [PATCH v2 2/4] litex: add common LiteX header
  • From: Greg Kroah-Hartman
• Re: [PATCH v2 2/4] litex: add common LiteX header
  • From: Gabriel L. Somlo
• Re: [PATCH 2/2] tty: add retry to tty_init_dev() to workaround a race condition
  • From: Sudip Mukherjee
• Re: [PATCH 2/2] tty: add retry to tty_init_dev() to workaround a race condition
  • From: Greg Kroah-Hartman
• Re: [PATCH] serial: serial_core: Perform NULL checks for break_ctl ops
  • From: Greg KH
• [PATCH] serial: serial_core: Perform NULL checks for break_ctl ops
  • From: Jiangfeng Xiao
• [PATCH 2/2] tty: add retry to tty_init_dev() to workaround a race condition
  • From: Sudip Mukherjee
• [PATCH 1/2] tty: remove unused argument from tty_open_by_driver()
  • From: Sudip Mukherjee
• [PATCH] tty: Fix Kconfig indentation
  • From: Krzysztof Kozlowski
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Miquel Raynal
• Re: console output duplicated when registering additional consoles
  • From: Sergey Senozhatsky
• Re: console output duplicated when registering additional consoles
  • From: Jonathan Richardson
• Re: console output duplicated when registering additional consoles
  • From: Jonathan Richardson
• Re: console output duplicated when registering additional consoles
  • From: Petr Mladek
• Re: console output duplicated when registering additional consoles
  • From: Sergey Senozhatsky
• Re: console output duplicated when registering additional consoles
  • From: Jonathan Richardson
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Greg Kroah-Hartman
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Richard Weinberger
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Miquel Raynal
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Richard Weinberger
• Re: [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Greg Kroah-Hartman
• [PATCH v5 28/48] serial: ucc_uart: explicitly include soc/fsl/cpm.h
  • From: Rasmus Villemoes
• [PATCH v5 30/48] serial: ucc_uart: factor out soft_uart initialization
  • From: Rasmus Villemoes
• [PATCH v5 29/48] serial: ucc_uart: replace ppc-specific IO accessors
  • From: Rasmus Villemoes
• [PATCH v5 31/48] serial: ucc_uart: stub out soft_uart_init for !CONFIG_PPC32
  • From: Rasmus Villemoes
• [PATCH v5 33/48] serial: ucc_uart: limit brg-frequency workaround to PPC32
  • From: Rasmus Villemoes
• [PATCH v5 34/48] serial: ucc_uart: access __be32 field using be32_to_cpu
  • From: Rasmus Villemoes
• [PATCH v5 32/48] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Rasmus Villemoes
• [PATCH] serial: pl011: Fix DMA ->flush_buffer()
  • From: Vincent Whitchurch
• [PATCH] serial: ifx6x60: add missed pm_runtime_disable
  • From: Chuhong Yuan
• [PATCH v2] {tty: serial, nand: onenand}: samsung: rename to fix build warning
  • From: Sudip Mukherjee
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Scott Wood
• Re: [PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
  • From: Stephen Boyd
• Re: [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Stephen Boyd
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Timur Tabi
• Re: [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• Re: [PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
  • From: Akash Asthana
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Michal Simek
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Rasmus Villemoes
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Rasmus Villemoes
• Re: [PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Akash Asthana
• Re: [PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Greg KH
• Re: [PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Akash Asthana
• Re: console output duplicated when registering additional consoles
  • From: Sergey Senozhatsky
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Timur Tabi
• Re: [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Stephen Boyd
• Re: [PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
  • From: Stephen Boyd
• Re: [PATCH v4 32/47] serial: ucc_uart: use of_property_read_u32() in ucc_uart_probe()
  • From: Timur Tabi
• Re: console output duplicated when registering additional consoles
  • From: Petr Mladek
• Re: [PATCH v4 30/47] serial: ucc_uart: factor out soft_uart initialization
  • From: Rasmus Villemoes
• Re: [PATCH 3/3] tty: serial: tegra: Use dma_request_chan() directly for channel request
  • From: Jon Hunter
• Re: [PATCH v4 30/47] serial: ucc_uart: factor out soft_uart initialization
  • From: Timur Tabi
• Re: [PATCH] tty: serial: samsung: rename to fix build warning
  • From: Greg Kroah-Hartman
• Re: console output duplicated when registering additional consoles
  • From: Jonathan Richardson
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Greg KH
• Re: [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: Johan Hovold
• [PATCHv5] serial-uartlite: Remove ULITE_NR_PORTS macro
  • From: shubhrajyoti . datta
• Re: [PATCHv4 4/4] serial: uartlite: Fix compilation issue on !OF platforms
  • From: Greg KH
• Re: [PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Greg KH
• [PATCH v5 3/3] tty: serial: qcom_geni_serial: Remove sysfs file
  • From: Akash Asthana
• [PATCH v5 2/3] tty: serial: qcom_geni_serial: Wakeup over UART RX
  • From: Akash Asthana
• [PATCH v5 1/3] tty: serial: qcom_geni_serial: IRQ cleanup
  • From: Akash Asthana
• [PATCH 1/3] tty: serial: amba-pl011: Use dma_request_chan() directly for channel request
  • From: Peter Ujfalusi