Re: [PATCH 4/6] spi: spi-geni-qcom: Add interconnect support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Feb 17, 2020 at 07:00:03PM +0530, Akash Asthana wrote:
> Get the interconnect paths for SPI based Serial Engine device
> and vote according to the current bus speed of the driver.
> 
> Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> ---
>  drivers/spi/spi-geni-qcom.c | 65 ++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 62 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
> index c397242..a066ef26 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -608,16 +653,25 @@ static int spi_geni_remove(struct platform_device *pdev)
>  	spi_unregister_master(spi);
>  
>  	free_irq(mas->irq, spi);
> +	geni_spi_icc_put(&mas->se);
>  	pm_runtime_disable(&pdev->dev);
>  	return 0;
>  }
>  
>  static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
>  {
> +	int ret;
>  	struct spi_master *spi = dev_get_drvdata(dev);
>  	struct spi_geni_master *mas = spi_master_get_devdata(spi);
>  
> -	return geni_se_resources_off(&mas->se);
> +	ret = geni_se_resources_off(&mas->se);
> +	if (ret)
> +		return ret;
> +
> +	icc_set_bw(mas->se.icc_path[GENI_TO_CORE], 0, 0);

This causes my SC7180 system to reset at boot time:

[    3.509652] qcom-qmp-phy 88e9000.phy-wrapper: Registered Qcom-QMP phy
[    3.516956] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
[    3.524450] geni_se_qup 8c0000.geniqup: Adding to iommu group 4
[    3.533896] spi_master spi0: will run message pump with realtime priority
<reset>

The system does not reset when passing 'Bps_to_icc(1000)' (=> 1) instead of 0.



[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux