[PATCH V3 1/2] tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



To fix the RX cancel command failure, rx_fifo buffer needs to be
flushed in stop_rx() by calling handle_rx().In handle_rx() the data
in rx_fifo buffer is read and then dropped, not sent to upper layers.

If set_termios is called before startup, by this time memory is not
allocated to port->rx_fifo buffer, which leads to a NULL pointer
dereference.

To avoid this NULL pointer dereference allocate memory to port->rx_fifo
in probe itself.

Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx>
Reported-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes in V3:
- As per Stephen's comment, change the declaration of rx_fifo pointer
  to void pointer.

 drivers/tty/serial/qcom_geni_serial.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 191abb1..f74f8a8 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -113,7 +113,7 @@ struct qcom_geni_serial_port {
 	unsigned int baud;
 	unsigned int tx_bytes_pw;
 	unsigned int rx_bytes_pw;
-	u32 *rx_fifo;
+	void *rx_fifo;
 	u32 loopback;
 	bool brk;
 
@@ -504,7 +504,6 @@ static int handle_rx_console(struct uart_port *uport, u32 bytes, bool drop)
 
 static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
 {
-	unsigned char *buf;
 	struct tty_port *tport;
 	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 	u32 num_bytes_pw = port->tx_fifo_width / BITS_PER_BYTE;
@@ -516,8 +515,7 @@ static int handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop)
 	if (drop)
 		return 0;
 
-	buf = (unsigned char *)port->rx_fifo;
-	ret = tty_insert_flip_string(tport, buf, bytes);
+	ret = tty_insert_flip_string(tport, port->rx_fifo, bytes);
 	if (ret != bytes) {
 		dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n",
 				__func__, ret, bytes);
@@ -858,12 +856,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
 						false, false, true);
 	geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2);
 	geni_se_select_mode(&port->se, GENI_SE_FIFO);
-	if (!uart_console(uport)) {
-		port->rx_fifo = devm_kcalloc(uport->dev,
-			port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
-		if (!port->rx_fifo)
-			return -ENOMEM;
-	}
 	port->setup = true;
 
 	return 0;
@@ -1274,6 +1266,13 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
+	if (!console) {
+		port->rx_fifo = devm_kcalloc(uport->dev,
+			port->rx_fifo_depth, sizeof(u32), GFP_KERNEL);
+		if (!port->rx_fifo)
+			return -ENOMEM;
+	}
+
 	port->name = devm_kasprintf(uport->dev, GFP_KERNEL,
 			"qcom_geni_serial_%s%d",
 			uart_console(uport) ? "console" : "uart", uport->line);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Linux PPP]     [Linux FS]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Linmodem]     [Device Mapper]     [Linux Kernel for ARM]

  Powered by Linux