On Wed, Feb 26, 2020 at 04:23:19PM -0600, George Hilliard wrote: > The peripheral has support for inverting its input and/or output > signals. This is useful if the hardware flips polarity of the > peripheral's signal, such as swapped +/- pins on an RS-422 transceiver, > or an inverting level shifter. Add support for these control registers > via the device tree binding. > > As part of this change, make the writes of the various registers more > uniform by moving the UCR3 block up near the other registers' blocks, > since the INVT bit must be set before enabling the peripheral. > > Signed-off-by: George Hilliard <ghilliard@xxxxxxxxxxxxxxx> LGTM, Acked-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> Thanks Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | https://www.pengutronix.de/ |
