The LS1028A uses little endian register access and has a different FIFO
size encoding.
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
drivers/tty/serial/fsl_lpuart.c | 27 +++++++++++++++++++++++++--
1 file changed, 25 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index ada7fb1fa075..54af8c1927ee 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -234,6 +234,7 @@ static DEFINE_IDA(fsl_lpuart_ida);
enum lpuart_type {
VF610_LPUART,
LS1021A_LPUART,
+ LS1028A_LPUART,
IMX7ULP_LPUART,
IMX8QXP_LPUART,
};
@@ -278,11 +279,16 @@ static const struct lpuart_soc_data vf_data = {
.iotype = UPIO_MEM,
};
-static const struct lpuart_soc_data ls_data = {
+static const struct lpuart_soc_data ls1021a_data = {
.devtype = LS1021A_LPUART,
.iotype = UPIO_MEM32BE,
};
+static const struct lpuart_soc_data ls1028a_data = {
+ .devtype = LS1028A_LPUART,
+ .iotype = UPIO_MEM32,
+};
+
static struct lpuart_soc_data imx7ulp_data = {
.devtype = IMX7ULP_LPUART,
.iotype = UPIO_MEM32,
@@ -297,7 +303,8 @@ static struct lpuart_soc_data imx8qxp_data = {
static const struct of_device_id lpuart_dt_ids[] = {
{ .compatible = "fsl,vf610-lpuart", .data = &vf_data, },
- { .compatible = "fsl,ls1021a-lpuart", .data = &ls_data, },
+ { .compatible = "fsl,ls1021a-lpuart", .data = &ls1021a_data, },
+ { .compatible = "fsl,ls1028a-lpuart", .data = &ls1028a_data, },
{ .compatible = "fsl,imx7ulp-lpuart", .data = &imx7ulp_data, },
{ .compatible = "fsl,imx8qxp-lpuart", .data = &imx8qxp_data, },
{ /* sentinel */ }
@@ -307,6 +314,11 @@ MODULE_DEVICE_TABLE(of, lpuart_dt_ids);
/* Forward declare this for the dma callbacks*/
static void lpuart_dma_tx_complete(void *arg);
+static inline bool is_ls1028a_lpuart(struct lpuart_port *sport)
+{
+ return sport->devtype == LS1028A_LPUART;
+}
+
static inline bool is_imx8qxp_lpuart(struct lpuart_port *sport)
{
return sport->devtype == IMX8QXP_LPUART;
@@ -1622,6 +1634,17 @@ static int lpuart32_startup(struct uart_port *port)
sport->rxfifo_size = UARTFIFO_DEPTH((temp >> UARTFIFO_RXSIZE_OFF) &
UARTFIFO_FIFOSIZE_MASK);
+ /*
+ * The LS1028A has a fixed length of 16 words. Although it supports the
+ * RX/TXSIZE fields their encoding is different. Eg the reference manual
+ * states 0b101 is 16 words.
+ */
+ if (is_ls1028a_lpuart(sport)) {
+ sport->rxfifo_size = 16;
+ sport->txfifo_size = 16;
+ sport->port.fifosize = sport->txfifo_size;
+ }
+
spin_lock_irqsave(&sport->port.lock, flags);
lpuart32_setup_watermark_enable(sport);
--
2.20.1
