Retrieve rs485 devicetree properties on registration of 8250 ports in
case they are attached to an rs485 transceiver.
If the property "linux,rs485-enabled-at-boot-time" is present, invoke
the ->rs485_config() callback to immediately deassert RTS, thereby
ceasing control of the bus.
Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
Cc: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
Cc: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_core.c | 4 +++-
drivers/tty/serial/8250/8250_port.c | 3 +++
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index f2a33c9082a6..9a1d09fbb836 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1013,8 +1013,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (uart->port.fifosize && !uart->tx_loadsz)
uart->tx_loadsz = uart->port.fifosize;
- if (up->port.dev)
+ if (up->port.dev) {
uart->port.dev = up->port.dev;
+ uart_get_rs485_mode(uart->port.dev, &uart->port.rs485);
+ }
if (up->port.flags & UPF_FIXED_TYPE)
uart->port.type = up->port.type;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index a8f4cedde4dc..40efcea8c6e7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2989,6 +2989,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up);
+ if (port->rs485.flags & SER_RS485_ENABLED)
+ port->rs485_config(port, &port->rs485);
+
/* if access method is AU, it is a 16550 with a quirk */
if (port->type == PORT_16550A && port->iotype == UPIO_AU)
up->bugs |= UART_BUG_NOMSR;
--
2.24.0
