Linux Renesas SOC

• Thread Index

• Re: [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Bartosz Golaszewski
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Wolfram Sang
• Re: [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Geert Uytterhoeven
• Re: [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Wolfram Sang
• Re: [PATCH RFT] i2c: sh_mobile: make sure to not accidently trigger STOP
  • From: Wolfram Sang
• Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: Wolfram Sang
• Re: [RFT] i2c: sh_mobile: avoid unnecessary register read
  • From: Wolfram Sang
• Re: [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang
• Re: [PATCH RFT 0/5] i2c: sh_mobile: refactor HW init/deinit
  • From: Wolfram Sang
• Re: [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Wolfram Sang
• [PATCH 1/1] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Fixes for v4.15
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/2] rcar-du, vsp1: rcar-gen3: Add support for colorkey alpha blending
  • From: Laurent Pinchart
• Re: [PATCH v2] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• [RFC] v4l: i2c: ov7670: Implement mbus configuration
  • From: Jacopo Mondi
• Re: [PATCH] mmc: renesas_sdhi: add missing MODULE_DESCRIPTION/AUTHOR/LICENSE
  • From: Geert Uytterhoeven
• Re: [PATCH 4/4] dt-bindings: mmc: renesas_sdhi: Add r8a77995 support
  • From: Ulf Hansson
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Ulf Hansson
• Re: [PATCH RFT] mmc: tmio: use usleep_range consistently
  • From: Ulf Hansson
• Re: [PATCH] arm64: renesas: document V3MSK board bindings
  • From: Rob Herring
• [PATCH v3 2/2] drm: rcar-du: Clip planes to screen boundaries
  • From: Laurent Pinchart
• [PATCH v3 1/2] drm: rcar-du: Share plane atomic check code between Gen2 and Gen3
  • From: Laurent Pinchart
• [PATCH v3 0/2] R-Car DU: Clip planes to screen boundaries
  • From: Laurent Pinchart
• Re: [PATCH v2 2/2] drm: rcar-du: Clip planes to screen boundaries
  • From: Laurent Pinchart
• Re: [PATCH 1/2] rcar-csi2: split Mbps calculation to separate function
  • From: Geert Uytterhoeven
• Re: [PATCH v2 02/22] mmc: renesas_sdhi: remove wrong depends on to enable compile test
  • From: Geert Uytterhoeven
• [PATCH 1/3] arm64: dts: renesas: r8a77970: add VIN and CSI-2
  • From: Niklas Söderlund
• [PATCH 3/3] arm64: dts: renesas: eagle: enable VIN
  • From: Niklas Söderlund
• [PATCH 2/3] arm64: dts: renesas: eagle: expansion: enable and connect CSI40
  • From: Niklas Söderlund
• [PATCH 0/3] arm64: dts: renesas: r8a77970: connect VIN to CSI40
  • From: Niklas Söderlund
• [PATCH 2/2] rcar-csi2: enable support for r8a77970
  • From: Niklas Söderlund
• [PATCH 1/2] rcar-csi2: split Mbps calculation to separate function
  • From: Niklas Söderlund
• [PATCH 0/2] rcar-csi2: enable support for r8a77970
  • From: Niklas Söderlund
• [PATCH] rcar-vin: enable support for r8a77970
  • From: Niklas Söderlund
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Sakari Ailus
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Sakari Ailus
• [PATCH 2/2] arm64: dts: renesas: v3msk: add EtherAVB support
  • From: Sergei Shtylyov
• [PATCH 1/2] arm64: dts: renesas: initial V3MSK board device tree
  • From: Sergei Shtylyov
• [PATCH 0/2] Add V3M Starter Kit board support
  • From: Sergei Shtylyov
• [PATCH] arm64: renesas: document V3MSK board bindings
  • From: Sergei Shtylyov
• Re: [PATCH] v4l: vsp1: Fix function declaration/definition mismatch
  • From: Kieran Bingham
• [PATCH v2 20/22] mmc: tmio: move clk_enable/disable out of tmio_mmc_host_probe()
  • From: Masahiro Yamada
• [PATCH v2 22/22] mmc: tmio: remove dma_ops from tmio_mmc_host_probe() argument
  • From: Masahiro Yamada
• [PATCH v2 03/22] mmc: renesas_sdhi: remove eprobe jump label
  • From: Masahiro Yamada
• [PATCH v2 04/22] mmc: tmio: set tmio_mmc_host to driver data
  • From: Masahiro Yamada
• [PATCH v2 19/22] mmc: tmio: ioremap memory resource in tmio_mmc_host_alloc()
  • From: Masahiro Yamada
• [PATCH v2 01/22] mmc: renesas_sdhi: consolidate DMAC CONFIG options
  • From: Masahiro Yamada
• [PATCH v2 00/22] mmc: tmio: various fixes and cleanups
  • From: Masahiro Yamada
• [PATCH v2 06/22] mmc: tmio: move mmc_host_ops to struct tmio_mmc_host from static data
  • From: Masahiro Yamada
• [PATCH v2 05/22] mmc: tmio: use devm_ioremap_resource() instead of devm_ioremap()
  • From: Masahiro Yamada
• [PATCH v2 15/22] mmc: tmio: change bus_shift to unsigned int
  • From: Masahiro Yamada
• [PATCH v2 11/22] mmc: renesas_sdhi: remove always false condition
  • From: Masahiro Yamada
• [PATCH v2 10/22] mmc: tmio: support IP-builtin card detection logic
  • From: Masahiro Yamada
• [PATCH v2 14/22] mmc: tmio,renesas_sdhi: move ssc_tappos to renesas_sdhi.h
  • From: Masahiro Yamada
• [PATCH v2 09/22] mmc: tmio: use mmc_can_gpio_cd() instead of checking TMIO_MMC_USE_GPIO_CD
  • From: Masahiro Yamada
• [PATCH v2 07/22] mmc: tmio, renesas_sdhi: set mmc_host_ops hooks directly
  • From: Masahiro Yamada
• [PATCH v2 17/22] mmc: tmio: move TMIO_MASK_{READOP,WRITEOP} handling to correct place
  • From: Masahiro Yamada
• [PATCH v2 08/22] mmc: tmio: move mmc_gpio_request_cd() before mmc_add_host()
  • From: Masahiro Yamada
• [PATCH v2 16/22] mmc: tmio: fix never-detected card insertion bug
  • From: Masahiro Yamada
• [PATCH v2 21/22] mmc: tmio: move {tmio_}mmc_of_parse() to tmio_mmc_host_alloc()
  • From: Masahiro Yamada
• [PATCH v2 12/22] mmc: tmio,renesas_sdhi: move struct tmio_mmc_dma to renesas_sdhi.h
  • From: Masahiro Yamada
• [PATCH v2 13/22] mmc: tmio,renesas_sdhi: move Renesas-specific DMA data to renesas_sdhi.h
  • From: Masahiro Yamada
• [PATCH v2 18/22] mmc: tmio: remove useless TMIO_MASK_CMD handling in tmio_mmc_host_probe()
  • From: Masahiro Yamada
• [PATCH v2 02/22] mmc: renesas_sdhi: remove wrong depends on to enable compile test
  • From: Masahiro Yamada
• Re: [PATCH v2] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• [PATCH v2 2/2] iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings
  • From: Simon Horman
• [PATCH v2 1/2] iommu/ipmmu-vmsa: Add r8a7796 DT binding
  • From: Simon Horman
• [PATCH v2 0/2] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Simon Horman
• [PATCH v2] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77970: sort includes
  • From: Simon Horman
• Re: [PATCH] arm64: dts: r8a7795: Increase the number of GPIO bank 1 ports to 29
  • From: Simon Horman
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Greg Kroah-Hartman
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Mauro Carvalho Chehab
• [PATCH] arm64: dts: r8a7795: Increase the number of GPIO bank 1 ports to 29
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Rename RTS{0,1,3,4}# pin function definitions
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7796: Rename RTS{0,1,3,4}# pin function definitions
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7796: Fix to delete A20..A25 pins function definitions
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/5] arm64: dts: renesas: r8a77970: sort includes
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7795-es1: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D
  • From: Geert Uytterhoeven
• Re: [PATCH] pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• Re: [GIT PULL FOR renesas-drivers] vsp1: TLB optimisation and DL caching
  • From: Geert Uytterhoeven
• Re: [PATCH 0/7] R-Car D3 (r8a77995) CAN support
  • From: Simon Horman
• Re: [PATCH v1 04/10] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/4] dt-bindings: media: rcar_vin: Reverse SoC part number list
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/3] arm64: dts: r8a77995: add DMA for SCIF2
  • From: Geert Uytterhoeven
• Re: [PATCH v2 3/3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 0/7] R-Car D3 (r8a77995) CAN support
  • From: Ulrich Hecht
• Re: [PATCH 0/7] R-Car D3 (r8a77995) CAN support
  • From: Simon Horman
• Re: [PATCH 7/7] can: rcar_canfd: document r8a77995 (R-Car D3) compatibility strings
  • From: Geert Uytterhoeven
• Re: [PATCH 6/7] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Geert Uytterhoeven
• Re: [PATCH 5/7] arm64: dts: r8a77995: Add CAN FD support
  • From: Geert Uytterhoeven
• Re: [PATCH 4/7] arm64: dts: r8a77995: Add CAN support
  • From: Geert Uytterhoeven
• Re: [PATCH 3/7] arm64: dts: r8a77995: Add CAN external clock support
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] arm64: dts: renesas: eagle: add I2C0 support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: add I2C support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/4] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• Re: [PATCH V2 2/5] PCI: rcar: Clean up the macros
  • From: Marek Vasut
• [bbb-overlays] Fixing overlay configfs for v4.14
  • From: Geert Uytterhoeven
• Re: [PATCH 7/7] can: rcar_canfd: document r8a77995 (R-Car D3) compatibility strings
  • From: Rob Herring
• Re: [PATCH 6/7] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Rob Herring
• Re: [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Marek Vasut
• Re: [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Rob Herring
• Re: [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Rob Herring
• [PATCH v2 3/3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Ulrich Hecht
• [PATCH v2 2/3] arm64: dts: r8a77995: add DMA for SCIF2
  • From: Ulrich Hecht
• [PATCH v2 1/3] arm64: dts: r8a77995: add SYS-DMAC nodes
  • From: Ulrich Hecht
• [PATCH v2 0/3] R-Car D3 (r8a77995) SYS-DMAC integration
  • From: Ulrich Hecht
• [PATCH] arm64: dts: renesas: r8a7795: Move nodes which have no reg property out of bus
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Arnd Bergmann
• Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Simon Horman
• Re: [PATCH 0/2] Add R8A77970/Eagle I2C support
  • From: Simon Horman
• Re: [PATCH v2 4/4] ARM: dts: r8a7745: add VIN dt support
  • From: Simon Horman
• Re: [PATCH v2 3/4] ARM: dts: r8a7743: add VIN dt support
  • From: Simon Horman
• Re: [PATCH v2 1/4] dt-bindings: media: rcar_vin: Reverse SoC part number list
  • From: Simon Horman
• Re: [PATCH 0/3] ARM: dts: Add PCIEC support
  • From: Simon Horman
• Re: [PATCH 0/8] Add CAN support to iwg2[02]d
  • From: Simon Horman
• Re: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Geert Uytterhoeven
• Re: [PATCH 0/2] ARM: dts: renesas: Correct primary compatible value for eeprom
  • From: Simon Horman
• Re: [PATCH 0/4] arm64: dts: renesas: salvator-x/xs: Add SoC name to file header
  • From: Simon Horman
• Re: [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: renesas: salvator-common: Add BD9571 PMIC
  • From: Simon Horman
• Re: [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Simon Horman
• Re: [PATCH] arm64: dts: renesas: ulcb-kf: add pfc node for USB3.0 channel 0
  • From: Vladimir Barinov
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Wolfram Sang
• Re: [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Wolfram Sang
• [PATCH/RFC 04/04] iommu/ipmmu-vmsa: VA64 mode with 30-bit IOVA
  • From: Magnus Damm
• [PATCH/RFC 03/04] iommu/ipmmu-vmsa: VA64 mode with 31-bit IOVA
  • From: Magnus Damm
• [PATCH/RFC 02/04] iommu/ipmmu-vmsa: VA64 mode with 32-bit IOVA
  • From: Magnus Damm
• [PATCH/RFC 01/04] iommu: Hack to dump page table configuration on boot
  • From: Magnus Damm
• [PATCH/RFC 00/04] iommu/ipmmu-vmsa: IPMMU IOVA prototyping on r8a7796 ES1.0
  • From: Magnus Damm
• [PATCH/RFC] arm64: r8a77965 Salvator-X SoC/board support prototype
  • From: Magnus Damm
• Re: [PATCH v2 1/4] dt-bindings: media: rcar_vin: Reverse SoC part number list
  • From: Rob Herring
• Re: [PATCH v2 2/4] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Rob Herring
• Re: [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Rob Herring
• Re: [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Marek Vasut
• Re: [PATCH] dt-bindings: qspi: Add r8a7743/5 to the compatible list
  • From: Mark Brown
• RE: [PATCH] dt-bindings: qspi: Add r8a7743/5 to the compatible list
  • From: Fabrizio Castro
• Re: [PATCH V2 4/5] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Lorenzo Pieralisi
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Simon Horman
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Simon Horman
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: add GPIO support
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] vsp1: TLB optimisation and DL caching
  • From: Kieran Bingham
• Re: [PATCH 0/7] R-Car D3 (r8a77995) CAN support
  • From: Wolfram Sang
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: add GPIO support
  • From: Sergei Shtylyov
• [PATCH v4 9/9] v4l: vsp1: Reduce display list body size
  • From: Kieran Bingham
• [PATCH v4 8/9] v4l: vsp1: Move video configuration to a cached dlb
  • From: Kieran Bingham
• [PATCH v4 7/9] v4l: vsp1: Adapt entities to configure into a body
  • From: Kieran Bingham
• [PATCH v4 6/9] v4l: vsp1: Refactor display list configure operations
  • From: Kieran Bingham
• [PATCH v4 5/9] v4l: vsp1: Use reference counting for bodies
  • From: Kieran Bingham
• [PATCH v4 4/9] v4l: vsp1: Convert display lists to use new body pool
  • From: Kieran Bingham
• [PATCH v4 3/9] v4l: vsp1: Provide a body pool
  • From: Kieran Bingham
• [PATCH v4 2/9] v4l: vsp1: Protect bodies against overflow
  • From: Kieran Bingham
• [PATCH v4 1/9] v4l: vsp1: Reword uses of 'fragment' as 'body'
  • From: Kieran Bingham
• [PATCH v4 0/9] vsp1: TLB optimisation and DL caching
  • From: Kieran Bingham
• Re: [PATCH 6/7] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Simon Horman
• Re: [PATCH v2 2/4] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Simon Horman
• Re: [PATCH v2 1/4] dt-bindings: media: rcar_vin: Reverse SoC part number list
  • From: Simon Horman
• Re: [PATCH v2 5/8] v4l: vsp1: Refactor display list configure operations
  • From: Kieran Bingham
• Re: [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Simon Horman
• Re: [PATCH 4/4] dt-bindings: mmc: renesas_sdhi: Add r8a77995 support
  • From: Simon Horman
• Re: [PATCH 2/4] arm64: dts: r8a77995: Add SDHI (MMC) support
  • From: Simon Horman
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Simon Horman
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Simon Horman
• Re: [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Simon Horman
• Re: [PATCH 2/3] arm64: dts: r8a7795: add DMA for SCIF2
  • From: Simon Horman
• Re: [PATCH 1/3] arm64: dts: r8a77995: add SYS-DMAC nodes
  • From: Simon Horman
• Re: [PATCH 3/3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Simon Horman
• Re: [PATCH v1 04/10] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Simon Horman
• Re: [PATCH 2/2] arm64: dts: renesas: eagle: specify EtherAVB PHY IRQ
  • From: Simon Horman
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: add GPIO support
  • From: Simon Horman
• Re: [PATCH] arm64: dts: ulcb-kf: add dr_mode property for USB2.0 channel 0
  • From: Simon Horman
• Re: [PATCH v2] arm64: dts: ulcb-kf: enable USB2 PHY of channel 0
  • From: Simon Horman
• Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Rob Herring
• Re: [PATCH v2 6/8] v4l: vsp1: Adapt entities to configure into a body
  • From: Kieran Bingham
• Re: [PATCH v2 0/7] arm64: dts: renesas: r8a7796: IPMMU upstream integration
  • From: Simon Horman
• Re: [PATCH v5 00/15] arm64: dts: renesas: r8a7795: IPMMU upstream integration
  • From: Simon Horman
• Re: [PATCH v5 01/15] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
  • From: Simon Horman
• Re: [PATCH v2 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  • From: Simon Horman
• Re: [PATCH 2/7] pinctrl: sh-pfc: r8a77995: Add CAN FD support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/7] pinctrl: sh-pfc: r8a77995: Add CAN support
  • From: Geert Uytterhoeven
• Re: [PATCH v11 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Hans Verkuil
• Re: [PATCH v7 02/25] rcar-vin: register the video device at probe time
  • From: Hans Verkuil
• Re: [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller
  • From: Hans Verkuil
• Re: [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value
  • From: Hans Verkuil
• Re: [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info
  • From: Hans Verkuil
• Re: [PATCH v7 22/25] rcar-vin: add link notify for Gen3
  • From: Hans Verkuil
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Hans Verkuil
• Re: [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Sergei Shtylyov
• [PATCH 7/7] can: rcar_canfd: document r8a77995 (R-Car D3) compatibility strings
  • From: Ulrich Hecht
• [PATCH 6/7] can: rcar_can: document r8a77995 (R-Car D3) compatibility strings
  • From: Ulrich Hecht
• [PATCH 5/7] arm64: dts: r8a77995: Add CAN FD support
  • From: Ulrich Hecht
• [PATCH 4/7] arm64: dts: r8a77995: Add CAN support
  • From: Ulrich Hecht
• [PATCH 3/7] arm64: dts: r8a77995: Add CAN external clock support
  • From: Ulrich Hecht
• [PATCH 2/7] pinctrl: sh-pfc: r8a77995: Add CAN FD support
  • From: Ulrich Hecht
• [PATCH 1/7] pinctrl: sh-pfc: r8a77995: Add CAN support
  • From: Ulrich Hecht
• [PATCH 0/7] R-Car D3 (r8a77995) CAN support
  • From: Ulrich Hecht
• Re: [PATCH RFT] i2c: sh_mobile: make sure to not accidently trigger STOP
  • From: jacopo mondi
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH v1 06/10] sh: sh7722: Rename CEU clock
  • From: jacopo mondi
• Re: [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies
  • From: jacopo mondi
• Re: [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Geert Uytterhoeven
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Shawn Lin
• Re: [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Sakari Ailus
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Sakari Ailus
• [PATCH 2/2] arm64: dts: renesas: eagle: add I2C0 support
  • From: Sergei Shtylyov
• [PATCH 1/2] arm64: dts: renesas: r8a77970: add I2C support
  • From: Sergei Shtylyov
• [PATCH 0/2] Add R8A77970/Eagle I2C support
  • From: Sergei Shtylyov
• Re: [PATCH 0/1] Add R8A77970/Eagle I2C support
  • From: Sergei Shtylyov
• [PATCH 1/1] arm64: dts: renesas: eagle: add I2C0 support
  • From: Sergei Shtylyov
• [PATCH 0/1] Add R8A77970/Eagle I2C support
  • From: Sergei Shtylyov
• Re: [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Sergei Shtylyov
• [PATCH] gpio: pca953x: fix vendor prefix for PCA9654
  • From: Sergei Shtylyov
• [PATCH v2 4/4] ARM: dts: r8a7745: add VIN dt support
  • From: Fabrizio Castro
• [PATCH v2 3/4] ARM: dts: r8a7743: add VIN dt support
  • From: Fabrizio Castro
• [PATCH v2 2/4] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• [PATCH v2 1/4] dt-bindings: media: rcar_vin: Reverse SoC part number list
  • From: Fabrizio Castro
• [PATCH v2 0/4] Add VIN support to r8a774[35]
  • From: Fabrizio Castro
• RE: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• Re: [PATCH v2 7/8] v4l: vsp1: Move video configuration to a cached dlb
  • From: Kieran Bingham
• Re: [PATCH v2 2/2] drm: rcar-du: Clip planes to screen boundaries
  • From: Ville Syrjälä
• Re: [PATCH/RFC 2/2] v4l: rcar-vin: Wait for device access to complete before unplugging
  • From: Niklas Söderlund
• [PATCH] pinctrl: sh-pfc: r8a7796: Rename RTS{0,1,3,4}# pin function definitions
  • From: Yoshihiro Kaneko
• [PATCH] pinctrl: sh-pfc: r8a7795: Rename RTS{0,1,3,4}# pin function definitions
  • From: Yoshihiro Kaneko
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Kieran Bingham
• Re: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• [PATCH 2/2] ARM: dts: genmai: Correct primary compatible value for eeprom
  • From: Geert Uytterhoeven
• [PATCH 0/2] ARM: dts: renesas: Correct primary compatible value for eeprom
  • From: Geert Uytterhoeven
• [PATCH 1/2] ARM: dts: koelsch: Correct primary compatible value for eeprom
  • From: Geert Uytterhoeven
• [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Geert Uytterhoeven
• RE: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• [PATCH 2/4] arm64: dts: renesas: r8a7795-salvator-x: Add SoC name to file header
  • From: Geert Uytterhoeven
• [PATCH 4/4] arm64: dts: renesas: r8a7795-salvator-xs: Add SoC name to file header
  • From: Geert Uytterhoeven
• [PATCH 1/4] arm64: dts: renesas: r8a7795-es1-salvator-x: Add SoC name to file header
  • From: Geert Uytterhoeven
• [PATCH 3/4] arm64: dts: renesas: r8a7796-salvator-x: Add SoC name to file header
  • From: Geert Uytterhoeven
• [PATCH 0/4] arm64: dts: renesas: salvator-x/xs: Add SoC name to file header
  • From: Geert Uytterhoeven
• RE: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• [PATCH] ARM: dts: r8a779x: Add '#reset-cells' in cpg-mssr
  • From: Geert Uytterhoeven
• [PATCH v2] arm64: dts: renesas: salvator-common: Add BD9571 PMIC
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 2/2] v4l: rcar-vin: Wait for device access to complete before unplugging
  • From: Sakari Ailus
• Re: [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Sakari Ailus
• Re: [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Sergei Shtylyov
• [PATCH 2/2] ARM: dts: r8a7743: add VIN dt support
  • From: Fabrizio Castro
• [PATCH 1/2] dt-bindings: media: rcar_vin: add device tree support for r8a774[35]
  • From: Fabrizio Castro
• [PATCH 0/2] Add VIN support to r8a7743
  • From: Fabrizio Castro
• Re: [PATCH 3/3] vin-tests: Refactor mc_get_dev
  • From: Kieran Bingham
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Ulf Hansson
• Re: [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Geert Uytterhoeven
• Re: [PATCH 2/4] arm64: dts: r8a77995: Add SDHI (MMC) support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/4] mmc: renesas_sdhi: enable R-Car D3 (r8a77995) support
  • From: Geert Uytterhoeven
• Re: [PATCH] v4l: sh_mobile_ceu: Return buffers on streamoff()
  • From: Sakari Ailus
• Re: [PATCH 4/4] dt-bindings: mmc: renesas_sdhi: Add r8a77995 support
  • From: Geert Uytterhoeven
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Geert Uytterhoeven
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Geert Uytterhoeven
• [RFC] arm: dts: gr-peach: Add audiocamerashield DTSi
  • From: Jacopo Mondi
• Re: [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Geert Uytterhoeven
• RE: [PATCH 2/3] arm64: dts: r8a7795: add DMA for SCIF2
  • From: Chris Paterson
• Re: [PATCH 6/6] i2c: rcar: document R8A77970 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH 2/6] i2c: rcar: enable for R-Car D3 (r8a77995)
  • From: Geert Uytterhoeven
• Re: [PATCH 1/6] pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux data
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] arm64: dts: r8a7795: add DMA for SCIF2
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] arm64: dts: r8a77995: add SYS-DMAC nodes
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Geert Uytterhoeven
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Shawn Lin
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Ulf Hansson
• [PATCH] pinctrl: sh-pfc: r8a7796: Fix to delete A20..A25 pins function definitions
  • From: Yoshihiro Kaneko
• [PATCH] pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions
  • From: Yoshihiro Kaneko
• [PATCH] pinctrl: sh-pfc: r8a7795-es1: Fix MOD_SEL1 bit[25:24] to 0x3 when using STP_ISEN_1_D
  • From: Yoshihiro Kaneko
• [PATCH] pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support
  • From: Yoshihiro Kaneko
• [PATCH/RFC 2/2] v4l: rcar-vin: Wait for device access to complete before unplugging
  • From: Laurent Pinchart
• [PATCH/RFC 1/2] v4l: v4l2-dev: Add infrastructure to protect device unplug race
  • From: Laurent Pinchart
• [PATCH/RFC 0/2] V4L2: Handle the race condition between device access and unbind
  • From: Laurent Pinchart
• Re: [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Laurent Pinchart
• Re: [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Niklas Söderlund
• Re: [PATCH v11 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Niklas Söderlund
• [PATCH] v4l: rcar-vin: Implement V4L2 video node release handler
  • From: Laurent Pinchart
• Re: [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Sergei Shtylyov
• Re: [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Rob Herring
• Re: [PATCH v11 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Rob Herring
• Re: [PATCH 2/2] pinctrl: sh-pfc: add R8A77970 PFC support
  • From: Rob Herring
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Geert Uytterhoeven
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: jacopo mondi
• [PATCH] v4l: sh_mobile_ceu: Return buffers on streamoff()
  • From: Jacopo Mondi
• Re: [GIT PULL FOR renesas-drivers] R-Car DU IOMMU
  • From: Geert Uytterhoeven
• Re: [PULL REQUEST] renesas/topic/mmc-delay-refactor-for-geert for renesas drivers
  • From: Geert Uytterhoeven
• Re: [PATCH] arm64: dts: ulcb-kf: add dr_mode property for USB2.0 channel 0
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] vin-tests: Refactor mc_get_dev
  • From: Niklas Söderlund
• Re: [PATCH] arm64: dts: renesas: ulcb-kf: add pfc node for USB3.0 channel 0
  • From: Geert Uytterhoeven
• Re: [PATCH v2] arm64: dts: ulcb-kf: enable USB2 PHY of channel 0
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] tools: 8camera-status: Expand to 9 cameras
  • From: Niklas Söderlund
• Re: [PATCH 1/3] tools: 8camera-status: Fix write failure mis-allocations
  • From: Niklas Söderlund
• Re: [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Geert Uytterhoeven
• Re: [PATCH v2 1/2] pinctrl: sh-pfc: r8a7794: Add can_clk function
  • From: Geert Uytterhoeven
• Re: [PATCH v2 2/2] pinctrl: sh-pfc: r8a7791: Add can_clk function
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] arm64: dts: renesas: eagle: specify EtherAVB PHY IRQ
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77970: add GPIO support
  • From: Geert Uytterhoeven
• Re: [PATCH v11 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH] v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
  • From: Niklas Söderlund
• Re: [PATCH 1/2] serial: sh-sci: Support for variable HSCIF hardware RX timeout
  • From: Wolfram Sang
• Re: [PATCH 1/2] serial: sh-sci: Support for variable HSCIF hardware RX timeout
  • From: Geert Uytterhoeven
• [PATCH 4/4] dt-bindings: mmc: renesas_sdhi: Add r8a77995 support
  • From: Ulrich Hecht
• [PATCH 3/4] arm64: dts: r8a77995: draak: enable SDHI2
  • From: Ulrich Hecht
• [PATCH 2/4] arm64: dts: r8a77995: Add SDHI (MMC) support
  • From: Ulrich Hecht
• [PATCH 1/4] mmc: renesas_sdhi: enable R-Car D3 (r8a77995) support
  • From: Ulrich Hecht
• [PATCH 0/4] R-Car D3 (r8a77995) SDHI (eMMC) integration
  • From: Ulrich Hecht
• [PATCH 6/6] i2c: rcar: document R8A77970 bindings
  • From: Ulrich Hecht
• [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Ulrich Hecht
• [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Ulrich Hecht
• [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Ulrich Hecht
• [PATCH 2/6] i2c: rcar: enable for R-Car D3 (r8a77995)
  • From: Ulrich Hecht
• [PATCH 1/6] pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux data
  • From: Ulrich Hecht
• [PATCH 0/6] R-Car D3 (r8a77995) I2C integration
  • From: Ulrich Hecht
• [PATCH 3/3] dmaengine: rcar-dmac: Document R-Car D3 bindings
  • From: Ulrich Hecht
• [PATCH 1/3] arm64: dts: r8a77995: add SYS-DMAC nodes
  • From: Ulrich Hecht
• [PATCH 0/3] R-Car D3 (r8a77995) SYS-DMAC integration
  • From: Ulrich Hecht
• [PATCH 2/3] arm64: dts: r8a7795: add DMA for SCIF2
  • From: Ulrich Hecht
• Re: [PATCH 2/2] serial: sh-sci: Support for HSCIF RX sampling point adjustment
  • From: Wolfram Sang
• Re: [PATCH 1/2] serial: sh-sci: Support for variable HSCIF hardware RX timeout
  • From: Wolfram Sang
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Wolfram Sang
• Re: [PATCH v2 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  • From: Geert Uytterhoeven
• [PATCH 3/3] vin-tests: Refactor mc_get_dev
  • From: Kieran Bingham
• [PATCH 2/3] tools: 8camera-status: Expand to 9 cameras
  • From: Kieran Bingham
• [PATCH 1/3] tools: 8camera-status: Fix write failure mis-allocations
  • From: Kieran Bingham
• [PATCH 0/3] [VIN-Tests] minor updates
  • From: Kieran Bingham
• Re: [PATCH v5 02/15] arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes
  • From: Geert Uytterhoeven
• [PATCH RFT] i2c: sh_mobile: make sure to not accidently trigger STOP
  • From: Wolfram Sang
• Re: [PATCH v5 01/15] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
  • From: Geert Uytterhoeven
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: jacopo mondi
• Re: [PATCH/RFT v5 3/3] iommu/ipmmu-vmsa: Hook up r8a779(70|95) DT matching code
  • From: Geert Uytterhoeven
• Re: [RFC v2 2/2] base: dma-mapping: Postpone page_to_pfn() on mmap()
  • From: Robin Murphy
• Re: [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Simon Horman
• Re: [PATCH V2 2/5] PCI: rcar: Clean up the macros
  • From: Simon Horman
• Re: [PATCH V2 5/5] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Simon Horman
• Re: [PATCH v1 06/10] sh: sh7722: Rename CEU clock
  • From: Geert Uytterhoeven
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Geert Uytterhoeven
• Re: [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Geert Uytterhoeven
• Re: [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Sakari Ailus
• Re: [PATCH v1 02/10] include: media: Add Renesas CEU driver interface
  • From: Sakari Ailus
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Sakari Ailus
• Re: [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Kieran Bingham
• [PATCH v1 10/10] media: i2c: tw9910: Remove soc_camera dependencies
  • From: Jacopo Mondi
• [PATCH v1 09/10] v4l: i2c: Copy tw9910 soc_camera sensor driver
  • From: Jacopo Mondi
• [PATCH v1 08/10] media: i2c: ov772x: Remove soc_camera dependencies
  • From: Jacopo Mondi
• [PATCH v1 07/10] v4l: i2c: Copy ov772x soc_camera sensor driver
  • From: Jacopo Mondi
• [PATCH v1 06/10] sh: sh7722: Rename CEU clock
  • From: Jacopo Mondi
• [PATCH v1 05/10] arch: sh: migor: Use new renesas-ceu camera driver
  • From: Jacopo Mondi
• [PATCH v1 04/10] ARM: dts: r7s72100: Add Capture Engine Unit (CEU)
  • From: Jacopo Mondi
• [PATCH v1 03/10] v4l: platform: Add Renesas CEU driver
  • From: Jacopo Mondi
• [PATCH v1 02/10] include: media: Add Renesas CEU driver interface
  • From: Jacopo Mondi
• [PATCH v1 01/10] dt-bindings: media: Add Renesas CEU bindings
  • From: Jacopo Mondi
• [PATCH v1 00/10] Renesas Capture Engine Unit (CEU) V4L2 driver
  • From: Jacopo Mondi
• Re: [PATCH] v4l2-drm-example: Make the exporter selectable
  • From: Andrzej Hajda
• [PATCH] v4l2-drm-example: Make the exporter selectable
  • From: Laurent Pinchart
• [GIT PULL FOR renesas-drivers] R-Car DU IOMMU
  • From: Laurent Pinchart
• [PULL REQUEST] renesas/topic/mmc-delay-refactor-for-geert for renesas drivers
  • From: Wolfram Sang
• [PATCH RFT] mmc: core: use usleep_range rather than HZ magic in mmc_delay()
  • From: Wolfram Sang
• [PATCH RFT] mmc: tmio: use usleep_range consistently
  • From: Wolfram Sang
• Re: [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Sergei Shtylyov
• [RFC v2 2/2] base: dma-mapping: Postpone page_to_pfn() on mmap()
  • From: Jacopo Mondi
• [PATCH v2 1/2] sh: migor: Reserve memory block for CEU
  • From: Jacopo Mondi
• [PATCH v2 0/2] Migo-R: reserve memory block with memblock APIs
  • From: Jacopo Mondi
• Re: [PATCH] sh: migor: Reserve memory block for CEU
  • From: jacopo mondi
• [PATCH v2 2/2] pinctrl: sh-pfc: r8a7791: Add can_clk function
  • From: Fabrizio Castro
• [PATCH v2 1/2] pinctrl: sh-pfc: r8a7794: Add can_clk function
  • From: Fabrizio Castro
• [PATCH v2 0/2] Add can_clk function
  • From: Fabrizio Castro
• RE: [RFC PATCH 2/2] pinctrl: sh-pfc: r8a7791: Add can_clk function
  • From: Fabrizio Castro
• renesas-drivers-2017-11-14-v4.14
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings
  • From: Geert Uytterhoeven
• [PATCH v2] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Biju Das
• RE: [PATCH ] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Biju Das
• Re: [PATCH ] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Sergei Shtylyov
• Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: jacopo mondi
• Re: [PATCH/RFC 2/2] drm: rcar-du: Allow importing non-contiguous dma-buf with VSP
  • From: Liviu Dudau
• Re: [RFT] i2c: sh_mobile: avoid unnecessary register read
  • From: jacopo mondi
• [GIT PULL FOR renesas-drivers] arm64: dts: renesas: r8a77970: IPMMU upstream integration
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] iommu/ipmmu-vmsa: Add r8a779(6|70|95) support
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] arm64: dts: renesas: r8a77995: IPMMU upstream integration
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] arm64: dts: renesas: r8a7795: IPMMU upstream integration
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Simon Horman
• [GIT PULL FOR renesas-drivers] arm64: dts: renesas: r8a7796: IPMMU upstream integration
  • From: Simon Horman
• Re: [PATCH 2/2] pinctrl: sh-pfc: add R8A77970 PFC support
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Geert Uytterhoeven
• [PATCH/RFT v5 2/3] iommu/ipmmu-vmsa: Hook up r8a7796 DT matching code
  • From: Simon Horman
• [PATCH/RFT v5 1/3] iommu/ipmmu-vmsa: Increase maximum micro-TLBS to 48
  • From: Simon Horman
• [PATCH/RFT v5 3/3] iommu/ipmmu-vmsa: Hook up r8a779(70|95) DT matching code
  • From: Simon Horman
• [PATCH/RFT v5 0/3] iommu/ipmmu-vmsa: r8a779(6|70|95) support
  • From: Simon Horman
• Re: [PATCH 2/3] arm64: dts: renesas: eagle: add SCIF0 pins
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] arm64: dts: renesas: r8a77970: add PFC support
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 2/2] drm: rcar-du: Allow importing non-contiguous dma-buf with VSP
  • From: Laurent Pinchart
• [PATCH 2/2] arm64: dts: renesas: eagle: specify EtherAVB PHY IRQ
  • From: Sergei Shtylyov
• [PATCH 1/2] arm64: dts: renesas: r8a77970: add GPIO support
  • From: Sergei Shtylyov
• [PATCH 0/2] Add R8A77970/Eagle GPIO support
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] pinctrl: sh-pfc: add R8A77970 PFC support
  • From: Geert Uytterhoeven
• Re: [PATCH ] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Geert Uytterhoeven
• Re: [PATCH V2 2/5] PCI: rcar: Clean up the macros
  • From: Marek Vasut
• [PATCH 3/3] ARM: dts: iwg20d-q7: Enable PCIe Controller
  • From: Biju Das
• [PATCH 2/3] ARM: dts: r8a7743: Add PCIe Controller device node
  • From: Biju Das
• [PATCH 1/3] ARM: dts: r8a7743: Add default PCIe bus clock
  • From: Biju Das
• [PATCH 0/3] ARM: dts: Add PCIEC support
  • From: Biju Das
• [PATCH ] dt-bindings: PCI: rcar: Add device tree support for r8a7743
  • From: Biju Das
• Re: [PATCH v2 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• [PATCH v2 3/3] PM / Domains: Take wakeup_path_in_band status flag into account
  • From: Ulf Hansson
• [PATCH v2 2/3] PM / core: Add IN_BAND_WAKEUP driver flag
  • From: Ulf Hansson
• [PATCH v2 1/3] PM / core: Re-factor some code dealing with parents in __device_suspend()
  • From: Ulf Hansson
• [PATCH v2 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH/RFC 0/2] R-Car DU: Support importing non-contiguous dma-buf with VSP
  • From: Kieran Bingham
• Re: [PATCH] MIPS: implement a "bootargs-append" DT property
  • From: Geert Uytterhoeven
• Re: [PATCH] MIPS: implement a "bootargs-append" DT property
  • From: Daniel Gimpelevich
• Re: [PATCH] MIPS: implement a "bootargs-append" DT property
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] pinctrl: sh-pfc: add PORT_GP_CFG_{6|22}() helper macros
  • From: Geert Uytterhoeven
• Re: [RFC PATCH 2/2] pinctrl: sh-pfc: r8a7791: Add can_clk function
  • From: Geert Uytterhoeven
• Re: [PATCH 2/2] pinctrl: sh-pfc: r8a7795: Add CAN FD support
  • From: Geert Uytterhoeven
• Re: [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Add CAN support
  • From: Geert Uytterhoeven
• Re: [PATCH/RFC 2/2] drm: rcar-du: Allow importing non-contiguous dma-buf with VSP
  • From: Liviu Dudau
• Re: [PATCH/RFC 1/2] drm: rcar-du: Set the DMA coherent mask for the DU device
  • From: Liviu Dudau
• [PATCH/RFC 2/2] drm: rcar-du: Allow importing non-contiguous dma-buf with VSP
  • From: Laurent Pinchart
• [PATCH/RFC 1/2] drm: rcar-du: Set the DMA coherent mask for the DU device
  • From: Laurent Pinchart
• [PATCH/RFC 0/2] R-Car DU: Support importing non-contiguous dma-buf with VSP
  • From: Laurent Pinchart
• [PATCH] usb: gadget: udc: renesas_usb3: fix number of the pipes
  • From: Yoshihiro Shimoda
• [PATCH v2 2/2] drm: rcar-du: Clip planes to screen boundaries
  • From: Laurent Pinchart
• [PATCH v2 1/2] drm: rcar-du: Share plane atomic check code between Gen2 and Gen3
  • From: Laurent Pinchart
• [PATCH v2 0/2] R-Car DU: Clip planes to screen boundaries
  • From: Laurent Pinchart
• Re: [PATCH v7 25/25] rcar-vin: enable support for r8a7796
  • From: Geert Uytterhoeven
• Re: [PATCH V3] PCI: rcar: Use runtime PM to control controller clock
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] Add R8A77970/Eagle PFC support
  • From: Simon Horman
• Re: [PATCH V3] PCI: rcar: Use runtime PM to control controller clock
  • From: Simon Horman
• Re: [PATCH V2 4/5] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Simon Horman
• Re: [PATCH V2 3/5] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Simon Horman
• Re: [PATCH V2 1/5] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl()
  • From: Simon Horman
• Re: [PATCH V2 2/5] PCI: rcar: Clean up the macros
  • From: Simon Horman
• Re: [PATCH 3/3] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Simon Horman
• Re: [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Simon Horman
• Re: [PATCH v2] media: vsp1: Prevent suspending and resuming DRM pipelines
  • From: Laurent Pinchart
• Re: [PATCH v2] media: vsp1: Prevent suspending and resuming DRM pipelines
  • From: Kieran Bingham
• Re: [PATCH v2] media: vsp1: Prevent suspending and resuming DRM pipelines
  • From: Laurent Pinchart
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Sakari Ailus
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Sakari Ailus
• Re: [PATCH v2] media: vsp1: Prevent suspending and resuming DRM pipelines
  • From: Kieran Bingham
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Laurent Pinchart
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Laurent Pinchart
• [PATCH v7 04/25] rcar-vin: move max width and height information to chip information
  • From: Niklas Söderlund
• [PATCH v7 03/25] rcar-vin: move chip information to own struct
  • From: Niklas Söderlund
• [PATCH v7 05/25] rcar-vin: change name of video device
  • From: Niklas Söderlund
• [PATCH v7 01/25] rcar-vin: add Gen3 devicetree bindings documentation
  • From: Niklas Söderlund
• [PATCH v7 08/25] rcar-vin: do not reset crop and compose when setting format
  • From: Niklas Söderlund
• [PATCH v7 07/25] rcar-vin: all Gen2 boards can scale simplify logic
  • From: Niklas Söderlund
• [PATCH v7 09/25] rcar-vin: do not allow changing scaling and composing while streaming
  • From: Niklas Söderlund
• [PATCH v7 02/25] rcar-vin: register the video device at probe time
  • From: Niklas Söderlund
• [PATCH v7 06/25] rcar-vin: move functions regarding scaling
  • From: Niklas Söderlund
• [PATCH v7 14/25] rcar-vin: add function to manipulate Gen3 CHSEL value
  • From: Niklas Söderlund
• [PATCH v7 13/25] rcar-vin: enable Gen3 hardware configuration
  • From: Niklas Söderlund
• [PATCH v7 15/25] rcar-vin: add flag to switch to media controller mode
  • From: Niklas Söderlund
• [PATCH v7 16/25] rcar-vin: break out format alignment and checking
  • From: Niklas Söderlund
• [PATCH v7 10/25] rcar-vin: read subdevice format for crop only when needed
  • From: Niklas Söderlund
• [PATCH v7 18/25] rcar-vin: prepare for media controller mode initialization
  • From: Niklas Söderlund
• [PATCH v7 17/25] rcar-vin: use different v4l2 operations in media controller mode
  • From: Niklas Söderlund
• [PATCH v7 11/25] rcar-vin: fix handling of single field frames (top, bottom and alternate fields)
  • From: Niklas Söderlund
• [PATCH v7 19/25] rcar-vin: add group allocator functions
  • From: Niklas Söderlund
• [PATCH v7 20/25] rcar-vin: add chsel information to rvin_info
  • From: Niklas Söderlund
• [PATCH v7 21/25] rcar-vin: parse Gen3 OF and setup media graph
  • From: Niklas Söderlund
• [PATCH v7 23/25] rcar-vin: extend {start,stop}_streaming to work with media controller
  • From: Niklas Söderlund
• [PATCH v7 12/25] rcar-vin: move media bus configuration to struct rvin_info
  • From: Niklas Söderlund
• [PATCH v7 24/25] rcar-vin: enable support for r8a7795
  • From: Niklas Söderlund
• [PATCH v7 25/25] rcar-vin: enable support for r8a7796
  • From: Niklas Söderlund
• [PATCH v7 22/25] rcar-vin: add link notify for Gen3
  • From: Niklas Söderlund
• [PATCH v7 00/25] rcar-vin: Add Gen3 with media controller
  • From: Niklas Söderlund
• [PATCH v11 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• [PATCH v11 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH v11 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Niklas Söderlund
• Re: [PATCH v6 6/9] i2c: smbus: use DMA safe buffers for emulated SMBus transactions
  • From: Jonathan Cameron
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• Re: [PATCH v6 5/9] i2c: add i2c_master_{send|recv}_dmasafe
  • From: Jonathan Cameron
• Re: [PATCH v6 4/9] i2c: refactor i2c_master_{send_recv}
  • From: Jonathan Cameron
• Re: [PATCH v10 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• Re: [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Sakari Ailus
• Re: [PATCH v10 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Sakari Ailus
• [PATCH V2 5/5] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Marek Vasut
• [PATCH V2 4/5] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Marek Vasut
• [PATCH V2 3/5] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Marek Vasut
• [PATCH V2 2/5] PCI: rcar: Clean up the macros
  • From: Marek Vasut
• [PATCH V2 1/5] PCI: rcar: Poll more often in rcar_pcie_wait_for_dl()
  • From: Marek Vasut
• [PATCH V2 0/5] PCI: rcar: Add suspend/resume support
  • From: Marek Vasut
• Re: [PATCH 3/3] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Marek Vasut
• Re: [PATCH 2/3] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Marek Vasut
• Re: [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Marek Vasut
• Re: [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Marek Vasut
• Re: [PATCH V2] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• [PATCH V3] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• Re: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Rob Herring
• [PATCH 3/3] arm64: dts: renesas: eagle: add EtherAVB pins
  • From: Sergei Shtylyov
• [PATCH 2/3] arm64: dts: renesas: eagle: add SCIF0 pins
  • From: Sergei Shtylyov
• [PATCH 1/3] arm64: dts: renesas: r8a77970: add PFC support
  • From: Sergei Shtylyov
• [PATCH 0/3] Add R8A77970/Eagle PFC support
  • From: Sergei Shtylyov
• [PATCH 2/2] pinctrl: sh-pfc: add R8A77970 PFC support
  • From: Sergei Shtylyov
• [PATCH 1/2] pinctrl: sh-pfc: add PORT_GP_CFG_{6|22}() helper macros
  • From: Sergei Shtylyov
• [PATCH 0/2] Add Renesas R8A77970 PFC driver
  • From: Sergei Shtylyov
• [RFC PATCH 1/2] pinctrl: sh-pfc: r8a7794: Add can_clk function
  • From: Fabrizio Castro
• [RFC PATCH 2/2] pinctrl: sh-pfc: r8a7791: Add can_clk function
  • From: Fabrizio Castro
• [RFC PATCH 0/2] Add can_clk function
  • From: Fabrizio Castro
• Re: [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Ulf Hansson
• [PATCH 2/2] pinctrl: sh-pfc: r8a7795: Add CAN FD support
  • From: Ramesh Shanmugasundaram
• [PATCH 1/2] pinctrl: sh-pfc: r8a7795: Add CAN support
  • From: Ramesh Shanmugasundaram
• [PATCH 0/2] Add CAN & CAN FD pinctrl support for R-Car H3 ES2.0
  • From: Ramesh Shanmugasundaram
• [PATCH v10 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2
  • From: Niklas Söderlund
• [PATCH v10 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH v10 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: Niklas Söderlund
• [PATCH v2 7/7] arm64: dts: renesas: r8a7796: Enable IPMMU-DS0, DS1, MP, VI0, VC0 and MM
  • From: Simon Horman
• [PATCH v2 6/7] arm64: dts: renesas: r8a7796: Connect Ethernet-AVB to IPMMU-DS0
  • From: Simon Horman
• [PATCH v2 5/7] arm64: dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0
  • From: Simon Horman
• [PATCH v2 4/7] arm64: dts: renesas: r8a7796: Point FDP1 via FCPF to IPMMU-VI0
  • From: Simon Horman
• [PATCH v2 3/7] arm64: dts: renesas: r8a7796: Tie Audio-DMAC to IPMMU-MP
  • From: Simon Horman
• [PATCH v2 2/7] arm64: dts: renesas: r8a7796: Tie SYS-DMAC to IPMMU-DS0/1
  • From: Simon Horman
• [PATCH v2 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH v2 0/7] arm64: dts: renesas: r8a7796: IPMMU upstream integration
  • From: Simon Horman
• [PATCH v2 2/2] arm64: dts: renesas: r8a77995: Connect Ethernet-AVB to IPMMU-RT
  • From: Simon Horman
• [PATCH v2 1/2] arm64: dts: renesas: r8a77995: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH v2 0/2] dts: renesas: r8a77995: IPMMU upstream integration
  • From: Simon Horman
• [PATCH v2 5/5] arm64: dts: renesas: r8a77970: Enable IPMMU-DS1, RT and MM
  • From: Simon Horman
• [PATCH v2 4/5] arm64: dts: renesas: r8a77970: Connect Ethernet-AVB to IPMMU-RT
  • From: Simon Horman
• [PATCH v2 2/5] arm64: dts: renesas: r8a77970: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH v2 3/5] arm64: dts: renesas: r8a77970: Tie SYS-DMAC to IPMMU-DS1
  • From: Simon Horman
• [PATCH v2 1/5] arm64: dts: renesas: r8a77970: sort includes
  • From: Simon Horman
• [PATCH v2 0/5] arm64: dts: renesas: r8a77970: IPMMU upstream integration
  • From: Simon Horman
• [PATCH v5 15/15] arm64: dts: renesas: r8a7795-es1: Enable IPMMU-MP1
  • From: Simon Horman
• [PATCH v5 14/15] arm64: dts: renesas: r8a7795: Enable IPMMU-VI0, VP1, DS0, DS1 and MM
  • From: Simon Horman
• [PATCH v5 13/15] arm64: dts: renesas: r8a7795: Connect SATA to IPMMU-HC
  • From: Simon Horman
• [PATCH v5 11/15] arm64: dts: renesas: r8a7795-es1: Point VSPI via FCPVI to IPMMU-VP
  • From: Simon Horman
• [PATCH v5 12/15] arm64: dts: renesas: r8a7795: Connect Ethernet-AVB to IPMMU-DS0
  • From: Simon Horman
• [PATCH v5 07/15] arm64: dts: renesas: r8a7795: Point FDP1 via FCPF to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH v5 10/15] arm64: dts: renesas: r8a7795: Point VSPI via FCPVI to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH v5 09/15] arm64: dts: renesas: r8a7795: Point VSPBC/VSPBD via FCPVB to IPMMU-VP0/1
  • From: Simon Horman
• [PATCH v5 08/15] arm64: dts: renesas: r8a7795-es1: Point FDP1 via FCPF to IPMMU-VP0
  • From: Simon Horman
• [PATCH v5 06/15] arm64: dts: renesas: r8a7795-es1: Point DU/VSPD via FCPVD to IPMMU-VI0
  • From: Simon Horman
• [PATCH v5 05/15] arm64: dts: renesas: r8a7795: Point DU/VSPD via FCPVD to IPMMU-VI0/1
  • From: Simon Horman
• [PATCH v5 04/15] arm64: dts: renesas: r8a7795: Tie Audio-DMAC to IPMMU-MP0/1
  • From: Simon Horman
• [PATCH v5 03/15] arm64: dts: renesas: r8a7795: Tie SYS-DMAC to IPMMU-DS0/1
  • From: Simon Horman
• [PATCH v5 01/15] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH v5 02/15] arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH v5 00/15] arm64: dts: renesas: r8a7795: IPMMU upstream integration
  • From: Simon Horman
• Re: [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Geert Uytterhoeven
• Re: [PATCH v9 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• Re: [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Ulf Hansson
• [PATCH 1/2] iommu/ipmmu-vmsa: Add r8a7796 DT binding
  • From: Simon Horman
• [PATCH 0/2] iommu/ipmmu-vmsa: Add r8a779(6|70|95) DT bindings
  • From: Simon Horman
• [PATCH 2/2] iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings
  • From: Simon Horman
• Re: [PATCH v6 00/10] rockchip: kevin: Enable edp display
  • From: Enric Balletbo Serra
• Re: [PATCH 1/2] arm64: dts: renesas: r8a77995: Add IPMMU device nodes
  • From: Simon Horman
• [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: Wolfram Sang
• Re: [PATCH 1/7] arm64: dts: renesas: r8a7796: Add IPMMU device nodes
  • From: Simon Horman
• Re: [PATCH v4 10/15] arm64: dts: renesas: r8a7795: Point VSPI via FCPVI to IPMMU-VP0/1
  • From: Simon Horman
• Re: [PATCH v9 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• Re: [PATCH v4 01/15] arm64: dts: renesas: r8a7795: Add IPMMU device nodes
  • From: Simon Horman
• Re: [PATCH v4 02/15] arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes
  • From: Simon Horman
• Re: [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Geert Uytterhoeven
• Re: [PATCH 2/8] pinctrl: sh-pfc: r8a7745: Add CAN[01] support
  • From: Geert Uytterhoeven
• Re: [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Ulf Hansson
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH v9 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-W
  • From: Simon Horman
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH 2/3] soc: renesas: Identify R-Car M3-W ES1.1
  • From: Simon Horman
• Re: [PATCH 3/3] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Simon Horman
• Re: [PATCH 2/3] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Simon Horman
• Re: [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Simon Horman
• Re: [PATCH 0/2] iommu/ipmmu-vmsa: r8a779(70|95) support
  • From: Simon Horman
• Re: [PATCH 1/2] ARM: dts: r8a7745: Add DU support
  • From: Simon Horman
• Re: [PATCH 2/2] ARM: dts: iwg22d-sodimm-dbhd-ca: Add HDMI video output
  • From: Simon Horman
• Re: [PATCH 1/2] ARM: dts: r8a7745: Add DU support
  • From: Simon Horman
• Re: [PATCH v9 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Geert Uytterhoeven
• [PATCH v9 1/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver documentation
  • From: Niklas Söderlund
• [PATCH v9 2/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver
  • From: Niklas Söderlund
• [PATCH v9 0/2] media: rcar-csi2: add Renesas R-Car MIPI CSI-2 support
  • From: Niklas Söderlund
• [RFT] i2c: sh_mobile: avoid unnecessary register read
  • From: Wolfram Sang
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• [PATCH/RFC 3/3] gpio: rcar: Use wakeup_path i.s.o. explicit clock handling
  • From: Geert Uytterhoeven
• [PATCH/RFC 0/3] renesas: irqchip: Use wakeup_path i.s.o. explicit clock handling
  • From: Geert Uytterhoeven
• [PATCH/RFC 1/3] irqchip/renesas-intc-irqpin: Use wakeup_path i.s.o. explicit clock handling
  • From: Geert Uytterhoeven
• [PATCH/RFC 2/3] irqchip/renesas-irqc: Use wakeup_path i.s.o. explicit clock handling
  • From: Geert Uytterhoeven
• [PATCH v2 3/3] soc: renesas: rcar-sysc: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• [PATCH v2 2/3] clk: renesas: cpg-mssr: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• [PATCH v2 1/3] clk: renesas: mstp: Keep wakeup sources active during system suspend
  • From: Geert Uytterhoeven
• [PATCH v2 0/3] PM / Domain: renesas: Fix active wakeup behavior
  • From: Geert Uytterhoeven
• Re: [PATCH v2] gpio: rcar: Add r8a77995 (R-Car D3) support
  • From: Linus Walleij
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• [PATCH v2] gpio: rcar: Add r8a77995 (R-Car D3) support
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH 1/2] ARM: dts: r8a7745: Add DU support
  • From: Laurent Pinchart
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• Re: [PATCH] sh: migor: Reserve memory block for CEU
  • From: Laurent Pinchart
• Re: [PATCH] sh: migor: Reserve memory block for CEU
  • From: Laurent Pinchart
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Rafael J. Wysocki
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Mark Brown
• Re: [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang
• Re: [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: jacopo mondi
• Re: [PATCH] sh: migor: Reserve memory block for CEU
  • From: Geert Uytterhoeven
• [PATCH] sh: migor: Reserve memory block for CEU
  • From: Jacopo Mondi
• Re: [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 3/3] PM / Domains: Take WAKEUP_POWERED driver flag into account
  • From: Geert Uytterhoeven
• Re: [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Geert Uytterhoeven
• Re: [PATCH 1/3] PM / core: Re-factor some code dealing with parents in __device_suspend()
  • From: Geert Uytterhoeven
• [PATCH 3/3] PM / Domains: Take WAKEUP_POWERED driver flag into account
  • From: Ulf Hansson
• [PATCH 2/3] PM / core: Add WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• [PATCH 1/3] PM / core: Re-factor some code dealing with parents in __device_suspend()
  • From: Ulf Hansson
• [PATCH 0/3] PM / core: Invent a WAKEUP_POWERED driver flag
  • From: Ulf Hansson
• [PATCH] arm64: dts: ulcb-kf: add dr_mode property for USB2.0 channel 0
  • From: Vladimir Barinov
• [PATCH] arm64: dts: renesas: ulcb-kf: add pfc node for USB3.0 channel 0
  • From: Vladimir Barinov
• [PATCH v2] arm64: dts: ulcb-kf: enable USB2 PHY of channel 0
  • From: Vladimir Barinov
• Re: [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Sergei Shtylyov
• Re: [PATCH V2] PCI: rcar: Use runtime PM to control controller clock
  • From: Geert Uytterhoeven
• Re: [PATCH] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• Re: [PATCH] PCI: rcar: Add compatible string for r8a7796
  • From: Marek Vasut
• Re: [PATCH] PCI: rcar: Add compatible string for r8a7796
  • From: Marek Vasut
• [PATCH V2] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• Re: [PATCH] PCI: rcar: Use runtime PM to control controller clock
  • From: Geert Uytterhoeven
• Re: [PATCH] PCI: rcar: Add compatible string for r8a7796
  • From: Sergei Shtylyov
• [PATCH 1/3] PCI: rcar: Add the initialization of PCIe link in resume_noirq
  • From: Marek Vasut
• Re: [PATCH] PCI: rcar: Add compatible string for r8a7796
  • From: Geert Uytterhoeven
• [PATCH 3/3] PCI: rcar: Add the suspend/resume for pcie-rcar driver
  • From: Marek Vasut
• [PATCH 2/3] PCI: rcar: Support runtime PM, link state L1 handling
  • From: Marek Vasut
• [PATCH] PCI: rcar: Use runtime PM to control controller clock
  • From: Marek Vasut
• [PATCH] PCI: rcar: Add compatible string for r8a7796
  • From: Marek Vasut
• [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang
• Re: [PATCH v3] dmaengine: rcar-dmac: use TCRB instead of TCR for residue
  • From: Vinod Koul
• Re: [PATCH v3] dmaengine: rcar-dmac: use TCRB instead of TCR for residue
  • From: Kuninori Morimoto
• Re: [PATCH v3] dmaengine: rcar-dmac: use TCRB instead of TCR for residue
  • From: Vinod Koul
• Re: [PATCH 1/2] ARM: dts: r8a7745: Add DU support
  • From: Simon Horman
• Re: [PATCH v3 0/5] PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
  • From: Rafael J. Wysocki
• Re: [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Geert Uytterhoeven
• [PATCH 5/8] ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB
  • From: Fabrizio Castro
• [PATCH 8/8] ARM: dts: iwg20d-q7-dbcm-ca: Add can1 support to camera DB
  • From: Fabrizio Castro
• [PATCH 7/8] ARM: dts: iwg20d-q7-common: Add can0 support to carrier board
  • From: Fabrizio Castro
• [PATCH 6/8] ARM: dts: r8a7743: Add CAN[01] SoC support
  • From: Fabrizio Castro
• [PATCH 4/8] ARM: dts: iwg22d-sodimm: Add can0 support to carrier board
  • From: Fabrizio Castro
• [PATCH 3/8] ARM: dts: r8a7745: Add CAN[01] SoC support
  • From: Fabrizio Castro
• [PATCH 1/8] dt-bindings: can: rcar_can: document r8a774[35] can support
  • From: Fabrizio Castro
• [PATCH 2/8] pinctrl: sh-pfc: r8a7745: Add CAN[01] support
  • From: Fabrizio Castro
• [PATCH 0/8] Add CAN support to iwg2[02]d
  • From: Fabrizio Castro
• Re: [PATCH 1/2] dt-bindings: usb-xhci: Document r8a7743 support
  • From: Mathias Nyman
• Re: [PATCH] mmc: tmio: Replace msleep() of 20ms or less with usleep_range()
  • From: Ulf Hansson
• [PATCH v3 4/5] soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
  • From: Geert Uytterhoeven
• [PATCH v3 2/5] ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
  • From: Geert Uytterhoeven
• [PATCH v3 0/5] PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
  • From: Geert Uytterhoeven
• [PATCH v3 5/5] PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
  • From: Geert Uytterhoeven