Re: [PATCH 01/10] dt-bindings: display: renesas: Add R-Car LVDS encoder DT bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sergei,

On Friday, 12 January 2018 17:13:06 EET Sergei Shtylyov wrote:
> On 01/12/2018 03:58 AM, Laurent Pinchart wrote:
> > The Renesas R-Car Gen2 and Gen3 SoCs have internal LVDS encoders. Add
> > corresponding device tree bindings.
> > 
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > ---
> > 
> >  .../bindings/display/bridge/renesas,lvds.txt       | 54 +++++++++++++++++
> >  MAINTAINERS                                        |  1 +
> >   2 files changed, 55 insertions(+)
> >   create mode 100644
> >   Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt> 
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt new
> > file mode 100644
> > index 000000000000..459c56822eda
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt
> > @@ -0,0 +1,54 @@
> > +Renesas R-Car LVDS Encoder
> > +==========================
> > +
> > +These DT bindings describe the LVDS encoder embedded in the Renesas R-Car
> > Gen2
> > +and Gen3 SoCs.
> > +
> > +Required properties:
> > +
> > +- compatible : Shall contain one of
> > +  - "renesas,lvds-r8a7743" for R8A7790 (R-Car RZ/G1M) compatible LVDS
> > encoders
> > +  - "renesas,lvds-r8a7790" for R8A7790 (R-Car H2) compatible LVDS
> > encoders
> > +  - "renesas,lvds-r8a7791" for R8A7791 (R-Car M2-W) compatible LVDS
> > encoders
> > +  - "renesas,lvds-r8a7793" for R8A7791 (R-Car M2-N) compatible LVDS
> > encoders
> > +  - "renesas,lvds-r8a7795" for R8A7795 (R-Car H3) compatible LVDS
> > encoders
> > +  - "renesas,lvds-r8a7796" for R8A7796 (R-Car M3-W) compatible LVDS
> > encoders
> > +
> > +- reg: Base address and length for the memory-mapped registers
> > +- clocks: A phandle + clock-specifier pair for the functional clock
> > +
> > +Requires nodes:
> > +
> > +The LVDS encoder has two video ports. Their connections are modelled
> > using the
> > +OF graph bindings specified in Documentation/devicetree/bindings/
> > graph.txt.
> > +
> > +- Video port 0 corresponds to the parallel input
> 
> s/parallel/RGB/, perhaps?

Strictly speaking the LVDS output also carries RGB. I'll replace "parallel" 
with "parallel RGB".

> > +- Video port 1 corresponds to the LVDS output
> > +
> > +Each port shall have a single endpoint.
> > +
> > +
> > +Example:
> > +
> > +	lvds0: lvds@feb90000 {
> > +		compatible = "renesas,lvds-r8a7790";
> > +		reg = <0 0xfeb90000 0 0x1c>;
> > +		clocks = <&cpg CPG_MOD 726>;
> > +
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			port@0 {
> > +				reg = <0>;
> > +				lvds0_in: endpoint {
> > +					remote-endpoint = <&du_out_lvds0>;
> 
> Err, that "du_out_lvds0" label no longer reflects reality, no?

Well, it's the output of the DU connected to LVDS encoder 0, so I think the 
name still makes sense. If you can think of a better name feel free to propose 
one, otherwise I'll keep this one.

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux