From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
"Used internally" is vague. What it actually means is that those fields
are populated by the core if valid GPIOs are provided. Change the
comments to reflect that.
Tested-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
include/linux/i2c.h | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 5d7f3c1853ae4b..f8a9d81e911e52 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -545,12 +545,12 @@ struct i2c_timings {
* @recover_bus: Recover routine. Either pass driver's recover_bus() routine, or
* i2c_generic_scl_recovery().
* @get_scl: This gets current value of SCL line. Mandatory for generic SCL
- * recovery. Used internally for generic GPIO recovery.
- * @set_scl: This sets/clears SCL line. Mandatory for generic SCL recovery. Used
- * internally for generic GPIO recovery.
+ * recovery. Populated internally for generic GPIO recovery.
+ * @set_scl: This sets/clears the SCL line. Mandatory for generic SCL recovery.
+ * Populated internally for generic GPIO recovery.
* @get_sda: This gets current value of SDA line. Optional for generic SCL
- * recovery. Used internally, if sda_gpio is a valid GPIO, for generic GPIO
- * recovery.
+ * recovery. Populated internally, if sda_gpio is a valid GPIO, for generic
+ * GPIO recovery.
* @prepare_recovery: This will be called before starting recovery. Platform may
* configure padmux here for SDA/SCL line or something else they want.
* @unprepare_recovery: This will be called after completing recovery. Platform
--
2.11.0
