Hi Simon,
Thanks for your patch.
On 2018-01-17 17:17:13 +0100, Simon Horman wrote:
> Sort the subnodes of the soc node to improve maintainability.
> The sort key is the address on the bus with instances of the same
> IP block grouped together.
>
> This patch should not introduce any functional change.
>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> v2
> * New patch
> ---
> arch/arm/boot/dts/r8a7793.dtsi | 90 +++++++++++++++++++++---------------------
> 1 file changed, 45 insertions(+), 45 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
> index f2b58a28cee9..aa7d7792fb13 100644
> --- a/arch/arm/boot/dts/r8a7793.dtsi
> +++ b/arch/arm/boot/dts/r8a7793.dtsi
> @@ -31,6 +31,35 @@
> spi0 = &qspi;
> };
>
> + /*
> + * The external audio clocks are configured as 0 Hz fixed frequency
> + * clocks by default.
> + * Boards that provide audio clocks should override them.
> + */
> + audio_clk_a: audio_clk_a {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> + audio_clk_b: audio_clk_b {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> + audio_clk_c: audio_clk_c {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> + /* External CAN clock */
> + can_clk: can {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -73,6 +102,22 @@
> };
> };
>
> + /* External root clock */
> + extal_clk: extal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
> +
> + /* External SCIF clock */
> + scif_clk: scif {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
> +
> soc {
> compatible = "simple-bus";
> interrupt-parent = <&gic>;
> @@ -1342,55 +1387,10 @@
> <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> };
>
> - /* External root clock */
> - extal_clk: extal {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> -
> - /*
> - * The external audio clocks are configured as 0 Hz fixed frequency
> - * clocks by default.
> - * Boards that provide audio clocks should override them.
> - */
> - audio_clk_a: audio_clk_a {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> - audio_clk_b: audio_clk_b {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> - audio_clk_c: audio_clk_c {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> -
> /* External USB clock - can be overridden by the board */
> usb_extal_clk: usb_extal {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <48000000>;
> };
> -
> - /* External CAN clock */
> - can_clk: can {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> -
> - /* External SCIF clock */
> - scif_clk: scif {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> };
> --
> 2.11.0
>
--
Regards,
Niklas Söderlund
