Hi Simon,
Thanks for your work.
On 2018-01-17 17:17:08 +0100, Simon Horman wrote:
> Sort subnodes of root node to aid maintenance.
>
> This patch should not introduce any functional change.
>
> Signed-off-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
> v2
> * New patch
> ---
> arch/arm/boot/dts/r8a7791.dtsi | 134 ++++++++++++++++++++---------------------
> 1 file changed, 67 insertions(+), 67 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
> index de2af2199731..dc659351472f 100644
> --- a/arch/arm/boot/dts/r8a7791.dtsi
> +++ b/arch/arm/boot/dts/r8a7791.dtsi
> @@ -39,6 +39,35 @@
> vin2 = &vin2;
> };
>
> + /*
> + * The external audio clocks are configured as 0 Hz fixed frequency
> + * clocks by default.
> + * Boards that provide audio clocks should override them.
> + */
> + audio_clk_a: audio_clk_a {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> + audio_clk_b: audio_clk_b {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> + audio_clk_c: audio_clk_c {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
> +
> + /* External CAN clock */
> + can_clk: can {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -82,23 +111,27 @@
> };
> };
>
> - thermal-zones {
> - cpu_thermal: cpu-thermal {
> - polling-delay-passive = <0>;
> - polling-delay = <0>;
> + /* External root clock */
> + extal_clk: extal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
>
> - thermal-sensors = <&thermal>;
> + /* External PCIe clock - can be overridden by the board */
> + pcie_bus_clk: pcie_bus {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + };
>
> - trips {
> - cpu-crit {
> - temperature = <95000>;
> - hysteresis = <0>;
> - type = "critical";
> - };
> - };
> - cooling-maps {
> - };
> - };
> + /* External SCIF clock */
> + scif_clk: scif {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> };
>
> soc {
> @@ -1668,6 +1701,25 @@
> };
> };
>
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <0>;
> + polling-delay = <0>;
> +
> + thermal-sensors = <&thermal>;
> +
> + trips {
> + cpu-crit {
> + temperature = <95000>;
> + hysteresis = <0>;
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv7-timer";
> interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> @@ -1676,62 +1728,10 @@
> <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> };
>
> - /* External root clock */
> - extal_clk: extal {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> -
> - /*
> - * The external audio clocks are configured as 0 Hz fixed frequency
> - * clocks by default.
> - * Boards that provide audio clocks should override them.
> - */
> - audio_clk_a: audio_clk_a {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> - audio_clk_b: audio_clk_b {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> - audio_clk_c: audio_clk_c {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> -
> - /* External PCIe clock - can be overridden by the board */
> - pcie_bus_clk: pcie_bus {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <0>;
> - };
> -
> - /* External SCIF clock */
> - scif_clk: scif {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> -
> /* External USB clock - can be overridden by the board */
> usb_extal_clk: usb_extal {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <48000000>;
> };
> -
> - /* External CAN clock */
> - can_clk: can {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - /* This value must be overridden by the board. */
> - clock-frequency = <0>;
> - };
> };
> --
> 2.11.0
>
--
Regards,
Niklas Söderlund
