Hello!
On 1/4/2018 11:01 PM, Chris Brandt wrote:
Add USB device support.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
arch/arm/boot/dts/r7s72100.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index ab9645a42eca..eb414e735185 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -667,4 +667,24 @@
power-domains = <&cpg_clocks>;
status = "disabled";
};
+
+ usbhs0: usbhs@e8010000 {
The node names should be generic, i.e "usb@e8010000".
+ compatible = "renesas,usbhs-r7s72100";
+ reg = <0xe8010000 0x1A0>;
Lowercase in the hex values, please be consistent...
+ interrupts = <GIC_SPI (73-32) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R7S72100_CLK_USB0>;
+ renesas,buswait = <4>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
+
+ usbhs1: usbhs@e8207000 {
+ compatible = "renesas,usbhs-r7s72100";
+ reg = <0xe8207000 0x1A0>;
+ interrupts = <GIC_SPI (74-32) IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R7S72100_CLK_USB1>;
+ renesas,buswait = <4>;
+ power-domains = <&cpg_clocks>;
+ status = "disabled";
+ };
};
The same comments for the 2nd device.
MBR, Sergei
