[PATCH 0/3] usb: renesas_usbhs: Add RZ/A1 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This series adds RZ/A1 gadget support to the renesas_usbhs driver.
Basically, it's almost the same HW as the R-Car (and SH) parts.
The only real difference is the some extra registers for the PHY.

This was tested on an RSK board by connecting to a PC as an
Ethernet CDC gadget.

Chris Brandt (3):
  usb: renesas_usbhs: Add support for RZ/A1
  dt-bindings: usb: renesas_usbhs: Add support for RZ/A1
  ARM: dts: r7s72100: add USB device to device tree

 .../devicetree/bindings/usb/renesas_usbhs.txt      |  2 +
 arch/arm/boot/dts/r7s72100.dtsi                    | 20 +++++++++
 drivers/usb/renesas_usbhs/Makefile                 |  2 +-
 drivers/usb/renesas_usbhs/common.c                 | 17 +++++++
 drivers/usb/renesas_usbhs/common.h                 |  6 +++
 drivers/usb/renesas_usbhs/rza.c                    | 52 ++++++++++++++++++++++
 drivers/usb/renesas_usbhs/rza.h                    |  4 ++
 include/linux/usb/renesas_usbhs.h                  |  1 +
 8 files changed, 103 insertions(+), 1 deletion(-)
 create mode 100644 drivers/usb/renesas_usbhs/rza.c
 create mode 100644 drivers/usb/renesas_usbhs/rza.h

-- 
2.15.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux