On Fri, Dec 22, 2017 at 11:29:20AM +0100, Simon Horman wrote: > Hi Olof, Hi Kevin, Hi Arnd, > > Please consider these second round of Renesas ARM64 based SoC DT updates > for v4.16. > > This pull request is based on the previous round of > such requests, tagged as renesas-arm64-dt-for-v4.16, > which you have already pulled. > > > The following changes since commit 8aba250d7800702bbd2f6a91174e01b9a84ed2dd: > > arm64: dts: renesas: r8a77970: use SYSC power domain macros (2017-12-05 09:30:48 +0100) > > are available in the git repository at: > > https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-arm64-dt2-for-v4.16 > > for you to fetch changes up to 68b2c029e6200933fa3f6c06c8e6de33e8c78c51: > > arm64: dts: renesas: salvator-common: enable usb3_peri0 (2017-12-21 10:22:12 +0100) > > ---------------------------------------------------------------- > Second Round of Renesas ARM64 Based SoC DT Updates for v4.16 > > * Add usb3_phy node to r8a7795 (R-Car H3) and r8a7796 (R-Car M3-W) SoCs, and > enable usb3_peri0 on salvator boards > > * Allow DTBs of boards of r8a7795 (R-Car H3) and r8a7796 SoCs to build > without any warnings when compiled with W=1 using gcc-linaro-5.4.1-2017.05 > - Move nodes which have no reg property out of bus, they don't belong there > - Add reg properties to dummy pciec[01] nodes > - Also sort sub-nodes of root node to allow for easier maintenance > > * Add Add EthernetAVB PHY reset to r8a7795 (R-Car H3) and r8a7796 SoCs boards. > > Geert Uytterhoeven says "... add properties to describe the EthernetAVB > PHY reset topology to the common Salvator-X/XS and ULCB DTS files, which > solves two issues: > 1. On Salvator-XS, the enable pin of the regulator providing PHY power > is connected to PRESETn, and PSCI powers down the SoC during system > suspend. Hence a PHY reset is needed to restore network > functionality after system resume. > 2. Linux should not rely on the boot loader having reset the PHY, but > should reset the PHY during driver probe." > Merged, thanks. -Olof
