Hi Sergei,
On Saturday, 13 January 2018 11:33:55 EET Sergei Shtylyov wrote:
> On 1/13/2018 2:10 AM, Laurent Pinchart wrote:
> > From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> >
> > According to the latest revision 2.00 of the R-Car gen2 manual, the LVDS
> > must be enabled and the bias crcuit enabled after the LVDS I/O pins are
> > enabled, not before. Fix the gen2 LVDS startup sequence accordingly.
> >
> > While at it, also fix the comment preceding the first LVDCR0 write that
> > still talks about hardcoding the LVDS mode 0.
>
> Please do this in a separate commit then...
The reason I added it here is that I think we don't need patch 1/2 from this
series, and I found a bit overkill to split a comment fix to a separate patch
when we have a patch that touches the code around the comment.
> > Fixes: 90374b5c25c9 ("drm/rcar-du: Add internal LVDS encoder support")
>
> You forgot to specify the other commit this one fixes -- I mean the comment
> fix.
Do we need to for a comment update ? It doesn't affect fix the behaviour of
the driver or device, and I'd thus prefer to avoid giving the wrong impression
that this patch fixes an bug introduced in a previous commit, otherwise it
might end up being backported unnecessarily.
> > Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
> > Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > [Set the mode and input at the same time as the BEN and LVEN bits]
> > Tested-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > ---
> >
> > drivers/gpu/drm/rcar-du/rcar_du_lvdsenc.c | 14 +++++++-------
> > 1 file changed, 7 insertions(+), 7 deletions(-)
> >
> > Hi Sergei,
> >
> > For your convenience (and if you agree with bundling mode setup with the
> > first write as explained in my review of patch 1/2), here's the updated
> > version of patch 2/2 that I have taken in my development branch. If
> > you're fine with it I'll keep it, otherwise we can continue the review
> > discussion.
>
> As I said, I don't know how to interpret the note 3 in either manual.
As explained in my latest reply to patch 1/2, my understanding is that the
parameters can be programmed at any time before step 6. The fact that the
current code works seems to confirm that interpretation. We could ask Renesas
for a confirmation if you want.
--
Regards,
Laurent Pinchart
