Linux on ARM based TI OMAP SoCs
[Prev Page][Next Page]
- [PATCHv2] ARM: OMAP: gptimer based event monitor driver for oprofile,
Siarhei Siamashka
- [PATCH v2 0/2] OMAP 2/3 GPIO fixes for idling debounce clocks,
Kevin Hilman
- [OMAPZOOM][PATCH] DSPBRIDGE: Fix for clock handles,
Ramirez Luna, Omar
- [PATCH F 00/12] OMAP clock, F of F: more clock cleanup,
Paul Walmsley
- [PATCH F 01/12] OMAP2/3 clock: don't use a barrier after clk_disable(),
Paul Walmsley
- [PATCH F 02/12] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier,
Paul Walmsley
- [PATCH F 04/12] OMAP clock: drop clk_get_usecount(),
Paul Walmsley
- [PATCH F 08/12] OMAP2/3 clock: omap2_clk_enable(): fix bugs in clockdomain handling,
Paul Walmsley
- [PATCH F 11/12] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be disabled,
Paul Walmsley
- [PATCH F 09/12] OMAP2/3 clock: omap2_clk_enable(): fix usecount decrement bug,
Paul Walmsley
- [PATCH F 06/12] OMAP2/3 clock: every clock must have a clkdm,
Paul Walmsley
- [PATCH F 12/12] OMAP2/3 McBSP: add temporary clockdomain fix for McBSP virtual clocks,
Paul Walmsley
- [PATCH F 10/12] OMAP2/3 clock: omap2_clk_enable(): fix logic,
Paul Walmsley
- [PATCH F 03/12] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers,
Paul Walmsley
- [PATCH F 07/12] OMAP2/3 clock: omap2_clk_enable(): refactor usecount check,
Paul Walmsley
- [PATCH F 05/12] OMAP clock: add OMAP chip family-specific clk_register() option,
Paul Walmsley
- [PATCH E 00/14] OMAP clock, E of F: SDRAM fixes, clock optimization,
Paul Walmsley
- [PATCH E 01/14] OMAP2 SDRC: move mach-omap2/memory.h into include/asm-arm/arch-omap/sdrc.h,
Paul Walmsley
- [PATCH E 02/14] OMAP2 SDRC: rename memory.c to sdrc2xxx.c,
Paul Walmsley
- [PATCH E 03/14] OMAP2 SDRC: separate common OMAP2/3 code from OMAP2xxx code,
Paul Walmsley
- [PATCH E 04/14] OMAP2 SDRC: add SDRAM timing parameter infrastructure,
Paul Walmsley
- [PATCH E 05/14] OMAP3 clock: add omap3_core_dpll_m2_set_rate(),
Paul Walmsley
- [PATCH E 08/14] OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c,
Paul Walmsley
- [PATCH E 10/14] OMAP clock: support "dry run" rate and parent changes,
Paul Walmsley
- [PATCH E 11/14] OMAP clock: track child clocks,
Paul Walmsley
- [PATCH E 13/14] OMAP2/3 clock: remove clk->owner,
Paul Walmsley
- [PATCH E 14/14] OMAP clock: rearrange clock.h structure order,
Paul Walmsley
- [PATCH E 06/14] PM: OMAP3: Make sure clk_disable_unused() order is correct,
Paul Walmsley
- [PATCH E 09/14] OMAP2/3 clock: drop recalc function pointers from fixed rate clocks,
Paul Walmsley
- [PATCH E 07/14] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init(),
Paul Walmsley
- [PATCH E 12/14] OMAP clock: unnecessary clock flag removal fiesta,
Paul Walmsley
- [PATCH D 00/11] OMAP clock, D of F: clock code cleanup,
Paul Walmsley
- [PATCH D 01/11] OMAP: Add clk_get_parent() for OMAP2/3,
Paul Walmsley
- [PATCH D 02/11] OMAP2/3 clock: clean up mach-omap2/clock.c,
Paul Walmsley
- [PATCH D 03/11] OMAP2 PRCM: clean up CM_IDLEST bits,
Paul Walmsley
- [PATCH D 04/11] OMAP3 clock: split mcbspX_src_fck from mcbspX_fck,
Paul Walmsley
- [PATCH D 05/11] OMAP2 clock: add clk.prcm_mod field; annotate OMAP2xxx clocks,
Paul Walmsley
- [PATCH D 07/11] OMAP2/3 clock: add _omap2_clk_{read,write}_reg(),
Paul Walmsley
- [PATCH D 09/11] OMAP2/3 clock: encode target IDLEST bits,
Paul Walmsley
- [PATCH D 06/11] OMAP3 clock: add "prcm_mod" field to OMAP3xxx clocks,
Paul Walmsley
- [PATCH D 10/11] OMAP2/3 clock: clean up omap2_clk_wait_ready(),
Paul Walmsley
- [PATCH D 11/11] Fix omap1 clock issues,
Paul Walmsley
- [PATCH C 00/13] OMAP clock, C of F: DPLL updates,
Paul Walmsley
- [PATCH C 01/13] OMAP3 clock: fix DPLL jitter correction and rate programming,
Paul Walmsley
- [PATCH C 02/13] OMAP3 clock: DPLL{1,2}_FCLK clksel can divide by 4,
Paul Walmsley
- [PATCH C 03/13] OMAP3 clock: convert dpll_data.idlest_bit to idlest_mask,
Paul Walmsley
- [PATCH C 04/13] OMAP3 clock: note the bypass source clock for DPLLs,
Paul Walmsley
- [PATCH C 06/13] OMAP3 clock: DPLLs should enter bypass if new rate is sys_ck,
Paul Walmsley
- [PATCH C 07/13] OMAP3 clock: recalculate DPLL subtree after bypass entry/exit,
Paul Walmsley
- [PATCH C 05/13] OMAP2/3 clock: fix DPLL rate calculation,
Paul Walmsley
- [PATCH C 10/13] OMAP3 clock: remove unnecessary dpll_data dereferences,
Paul Walmsley
- [PATCH C 08/13] OMAP3 clock: put DPLL into bypass if bypass rate = clk->rate, not hardware rate,
Paul Walmsley
- [PATCH C 09/13] OMAP3 clock: fix non-CORE DPLL rate assignment bugs,
Paul Walmsley
- [PATCH C 12/13] OMAP3 clock: avoid invalid FREQSEL values during DPLL rate rounding,
Paul Walmsley
- [PATCH C 13/13] OMAP3 clock: disable DPLL autoidle while waiting for DPLL to lock,
Paul Walmsley
- [PATCH C 11/13] OMAP3 clock: optimize DPLL rate rounding algorithm,
Paul Walmsley
- [PATCH B 00/10] OMAP clock, B of F: clockdomain, powerdomain updates,
Paul Walmsley
- [PATCH B 02/10] OMAP2/3 clockdomains: combine pwrdm, pwrdm_name into union in struct clockdomain,
Paul Walmsley
- [PATCH B 01/10] OMAP2/3 clock: combine clkdm, clkdm_name into union in struct clk,
Paul Walmsley
- [PATCH B 03/10] OMAP2/3 clockdomains: add CM, PRM, virt_opp_clkdm clockdomains,
Paul Walmsley
- [PATCH B 04/10] OMAP3 PRCM: add DPLL1-5 powerdomains, clockdomains; mark clocks,
Paul Walmsley
- [PATCH B 06/10] OMAP3 pwrdm: add CORE SAR handling (for USBTLL module),
Paul Walmsley
- [PATCH B 08/10] OMAP: wait for pwrdm transition after clk_enable(),
Paul Walmsley
- [PATCH B 07/10] OMAP3 powerdomains: remove RET from SGX power states list,
Paul Walmsley
- [PATCH B 09/10] OMAP2/3 clockdomains: autodeps should respect platform flags,
Paul Walmsley
- [PATCH B 10/10] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use,
Paul Walmsley
- Message not available
[PATCH A 00/10] OMAP clock, A of F: preliminaries,
Paul Walmsley
- [PATCH A 01/10] OMAP2/3: Add non-CORE DPLL rate set code and M, N programming,
Paul Walmsley
- [PATCH A 02/10] OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code,
Paul Walmsley
- [PATCH A 03/10] OMAP24xx clock: add missing SSI L4 interface clock,
Paul Walmsley
- [PATCH A 04/10] OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer,
Paul Walmsley
- [PATCH A 05/10] OMAP3 clock: fix 96MHz clocks,
Paul Walmsley
- [PATCH A 06/10] OMAP2: Fix definition of SGX clock register bits,
Paul Walmsley
- [PATCH A 08/10] OMAP: Make dpll4_m4_ck programmable with clk_set_rate(),
Paul Walmsley
- [PATCH A 07/10] OMAP: Add CSI2 clock struct for handling it with clock API.,
Paul Walmsley
- [PATCH A 10/10] OMAP2: Implement CPUfreq frequency table based on PRCM table,
Paul Walmsley
- Message not available
OMAP clock fast-forward: an introduction to six series,
Paul Walmsley
[PATCH omap-fixes] OMAP2/3: GPIO: remove recursion in IRQ wakeup path,
Kevin Hilman
[PATCH 0/9] Omap fixes for 2.6.29-rc series, also one arm generic fix,
Tony Lindgren
- [PATCH 1/9] ARM: Do early I/O mapping if spinlock debugging is enabled,
Tony Lindgren
- [PATCH 2/9] ARM: OMAP: Fix McBSP spin_lock deadlock,
Tony Lindgren
- [PATCH 3/9] ARM: OMAP: Fix race in OMAP2/3 DMA IRQ handling,
Tony Lindgren
- [PATCH 4/9] ARM: OMAP: DMA: Fix uninitialized channel flags,
Tony Lindgren
- [PATCH 5/9] ARM: OMAP: Fix omap34xx revision detection for ES3.1,
Tony Lindgren
- [PATCH 6/9] ARM: OMAP: Fix hsmmc init,
Tony Lindgren
- [PATCH 7/9] ARM: OMAP: gptimer min_delta_ns corrected,
Tony Lindgren
- [PATCH 8/9] ARM: OMAP: Mask interrupts when disabling interrupts,
Tony Lindgren
- [PATCH 9/9] ARM: OMAP: fix fault in enter_full_retention(),
Tony Lindgren
- Re: [PATCH 0/9] Omap fixes for 2.6.29-rc series, also one arm generic fix,
Russell King - ARM Linux
Re: Beagle PM hangs,
Kevin Hilman
Re: [alsa-devel] ASoC : underrun messages,
Mark Brown
HTC Wizard Framebuffer Support (OMAP850),
zmc
2.6.29-rc: remaining regression: n770_defconfig, omap_apollon_2420_defconfig,
Russell King - ARM Linux
Linux-omap git tree updated, hsmmc reset,
Tony Lindgren
[PATCH PM 0/2] OMAP2/3 GPIO fixes for idling debounce clocks,
Kevin Hilman
PM branch updates: 3430sdp and omap3evm results,
Kevin Hilman
[PATCH] OMAP HSMMC: fix MMC3 dma,
Grazvydas Ignotas
[PATCH] hsmmc: Add MMC3 support,
Grazvydas Ignotas
Fix for Zero sized arch/arm/mach-integrator/clock.h on distclean,
Aguirre Rodriguez, Sergio Alberto
[PATCH] PM debug: Fix problems with PM timers,
Tero Kristo
[PATCH] ARM: OMAP: Add command line option for I2C bus speed,
Jarkko Nikula
[PATCH v2] board-omap3beagle: set i2c-3 to 100kHz,
Koen Kooi
[ANNOUNCE:RFC] convert OMAP to use clkdev,
Russell King - ARM Linux
Nokia RX51 Board Files,
Lauri Leukkunen
[PATCH] SoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver,
Lopez Cruz, Misael
[PATCH] musb: fix tusb6010_omap compilation errors,
Kalle Valo
[PATCH] I2C: OMAP: Add missing wakeup events,
Pakaravoor, Jagadeesh
[PATCH] I2C: OMAP: Include OMAP_I2C_SYSC_REG in save and restore,
Pakaravoor, Jagadeesh
[PATCH] OMAP: McBSP: Wakeups utilized,
ext-eero . nurkkala
OMAP1: mcbsp clocks,
Russell King - ARM Linux
RE: OMAP1: mcbsp clocks,
Hunter, Jon
Odd behavior in musb_hdrc OTG if gadget drivers are modules,
david . hagood
cpuidle and NO_HZ,
Premi, Sanjeev
[PATCH 0/3] Hacks to make Nokia N800 compile,
Kalle Valo
[PATCH] OMAP I2C: Include OMAP_I2C_SYSC_REG in save and restore.,
Pakaravoor, Jagadeesh
OMAP I2C: query on save and restore,
Pakaravoor, Jagadeesh
[OMAPZOOM][PATCH]DSPBRIDGE: Change GFP_ATOMIC to GFP_KERNEL,
Guzman Lugo, Fernando
[patch/rfc 2.6.28-rc2] input: twl4030_keypad driver,
David Brownell
[PATCH] ARM OMAP: Fix race in OMAP2/3 DMA IRQ handling,
Juha Yrjölä
[PATCH 0/1] TWL: USB: disable VUSB regulators,
Kalle Jokiniemi
twl4030-usb.c,
Kalle Jokiniemi
[PATCH] OMAP3 McSPI: Adds context save/restore,
Hemanth V
Query: OMAP35x ZOOM Development Kit,
Remith Ravi
[PATCH] ASoC: Complete Beagleboard support,
Steve Sakoman
i2c-probe in 2.6.28 returns -EOPNOTSUPP,
pramod gurav
Is anybody else having problems with SDHC cards on Beagleboard?,
David Hagood
[patch 2.6.29-rc2-omap1-git 0/7] regulator and MMC updates...,
David Brownell
[patch 2.6.29-rc1-omap git] twl4030_keypad cleanup,
David Brownell
[PATCH repost] OMAP: convert omap ldp platform to use smsc911x,
Stanley.Miao
BUG: LDP - smc911x region too small,
Russell King - ARM Linux
[PATCH] DSPBRIDGE Memory leak when dynbase is loaded,
Ramirez Luna, Omar
ioremap()/iounmap() problem,
Tomi Valkeinen
[OMAPZOOM][PATCH] OMAP3ISP: Fix lsc_initialized flag setting,
Aguirre Rodriguez, Sergio Alberto
Question on how to best access a chip on init that needs VAUX1 power?,
Peter Barada
board-n800-bt.c compilation error (OMAP_TAG_NOKIA_BT missing),
Kalle Valo
Beagle defconfig broken in mainline,
Gadiyar, Anand
OMAP3 SDP support in mainline,
Gadiyar, Anand
[PATCH 3/3v4] Updates for OMAP3EVM,
Sanjeev Premi
[PATCH 2/3v4] Runtime check for OMAP35x,
Sanjeev Premi
[PATCH 1/3v4] Add support for OMAP35x processors,
Sanjeev Premi
[PATCH 0/3v4] Add support for OMAP35x processors,
Sanjeev Premi
[PATCH 0/6] arm: omap iommu: add initial support,
Hiroshi DOYU
[PATCH 00/10] arm: omap mailbox: add omap3 support with some fixes,
Hiroshi DOYU
[Index of Archives]
[Linux USB Devel]
[Linux Media]
[Video for Linux]
[Big List of Linux Books]
[Linux WPAN Networking]
[Linux SCSI]
[Scanners]
[Yosemite Forum]