Re: Beagle defconfig broken in mainline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* David Brownell <david-b@xxxxxxxxxxx> [090118 13:57]:
> From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> Subject: arch/arm/mach-omap2/board-omap3beagle.c buildfix
> 
>   CC      arch/arm/mach-omap2/board-omap3beagle.o
> arch/arm/mach-omap2/board-omap3beagle.c: In function 'beagle_twl_gpio_setup':
> arch/arm/mach-omap2/board-omap3beagle.c:132: error: 'TWL4030_GPIO_MAX' undeclared (first use in this function)
> ... many errors ...
> arch/arm/mach-omap2/board-omap3beagle.c:308: error: 'gpio' undeclared (first use in this function)
> make[1]: *** [arch/arm/mach-omap2/board-omap3beagle.o] Error 1

Similar patch (and other compile fixes) is already queued up via
omap-fixes branch, should get into the mainline within next few days.

Tony

> Reported-by: Anand Gadiyar <gadiyar@xxxxxx>
> Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> ---
> Against MAINLINE 2.6.29-rc2
> 
>  arch/arm/mach-omap2/board-omap3beagle.c |    9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -28,6 +28,8 @@
>  #include <linux/mtd/partitions.h>
>  #include <linux/mtd/nand.h>
>  
> +#include <linux/i2c/twl4030.h>
> +
>  #include <mach/hardware.h>
>  #include <asm/mach-types.h>
>  #include <asm/mach/arch.h>
> @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct 
>  		unsigned gpio, unsigned ngpio)
>  {
>  	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
> +	omap_cfg_reg(AH8_34XX_GPIO29);
> +	mmc[0].gpio_cd = gpio + 0;
> +	twl4030_mmc_init(mmc);
>  
>  	/* REVISIT: need ehci-omap hooks for external VBUS
>  	 * power switch and overcurrent detect
> @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(voi
>  	omap_board_config_size = ARRAY_SIZE(omap3_beagle_config);
>  	omap_serial_init();
>  
> -	omap_cfg_reg(AH8_34XX_GPIO29);
> -	mmc[0].gpio_cd = gpio + 0;
> -	twl4030_mmc_init(mmc);
> -
>  	omap_cfg_reg(J25_34XX_GPIO170);
>  	gpio_request(170, "DVI_nPD");
>  	/* REVISIT leave DVI powered down until it's needed ... */
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux