From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> Subject: arch/arm/mach-omap2/board-omap3beagle.c buildfix CC arch/arm/mach-omap2/board-omap3beagle.o arch/arm/mach-omap2/board-omap3beagle.c: In function 'beagle_twl_gpio_setup': arch/arm/mach-omap2/board-omap3beagle.c:132: error: 'TWL4030_GPIO_MAX' undeclared (first use in this function) ... many errors ... arch/arm/mach-omap2/board-omap3beagle.c:308: error: 'gpio' undeclared (first use in this function) make[1]: *** [arch/arm/mach-omap2/board-omap3beagle.o] Error 1 Reported-by: Anand Gadiyar <gadiyar@xxxxxx> Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> --- Against MAINLINE 2.6.29-rc2 arch/arm/mach-omap2/board-omap3beagle.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/i2c/twl4030.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(voi omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html