Re: [patch 2.6.29-rc1-omap git] twl4030_keypad cleanup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

Start cleaning up the twl4030 keypad driver to become more
suitable for mainline.

 - Remove false OMAP dependencies:  names, <mach/keypad.h>, Kconfig
 - We don't need a miniature header file
 - Add missing input_sync()
 - Fix section annotations
 - Fix probe() error cleanup
 - Streamline i/o calls
 - Remove needless mutex; maintain key state only via irqs
 - Remove unneeded headers
 - Use "unsigned" for things that can't be negative

The driver should also be renamed as "twl4030_keypad.c"; that will
be a different patch.

Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Trilok Soni <soni.trilok@xxxxxxxxx>
---
Refresh against RC2, with feedback addressed, and also a few
deltas that had accidentally been omitted.

 arch/arm/mach-omap2/board-2430sdp.c         |    1 
 arch/arm/mach-omap2/board-3430sdp.c         |    1 
 arch/arm/mach-omap2/board-ldp.c             |    1 
 arch/arm/mach-omap2/board-omap2evm.c        |    1 
 arch/arm/mach-omap2/board-omap3evm.c        |    1 
 drivers/input/keyboard/Kconfig              |    9 
 drivers/input/keyboard/omap-twl4030keypad.c |  300 +++++++++++++++-----------
 drivers/input/keyboard/twl4030-keypad.h     |   82 -------
 include/linux/i2c/twl4030.h                 |   16 +
 9 files changed, 200 insertions(+), 212 deletions(-)

--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -38,7 +38,6 @@
 #include <mach/board.h>
 #include <mach/usb-musb.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/gpmc.h>
 #include <mach/mcspi.h>
 
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -36,7 +36,6 @@
 #include <mach/usb-musb.h>
 #include <mach/usb-ehci.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -34,7 +34,6 @@
 #include <mach/gpio.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/gpmc.h>
 #include <mach/usb-musb.h>
 
--- a/arch/arm/mach-omap2/board-omap2evm.c
+++ b/arch/arm/mach-omap2/board-omap2evm.c
@@ -35,7 +35,6 @@
 #include <mach/board.h>
 #include <mach/common.h>
 #include <mach/mmc.h>
-#include <mach/keypad.h>
 #include <mach/gpmc.h>
 #include <mach/nand.h>
 #include <mach/mcspi.h>
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -30,7 +30,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/keypad.h>
 #include <mach/board.h>
 #include <mach/usb-musb.h>
 #include <mach/usb-ehci.h>
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -260,14 +260,15 @@ config KEYBOARD_OMAP
 	  module will be called omap-keypad.
 
 config KEYBOARD_TWL4030
-	tristate "TI TWL4030 keypad support"
+	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
 	depends on TWL4030_CORE
 	help
-	  Say Y here if you want to use the OMAP TWL4030 keypad.
+	  Say Y here if your board use the keypad controller on
+	  TWL4030 family chips.  It's safe to say enable this
+	  even on boards that don't use the keypad controller.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called omap-twl4030keypad. This driver depends on
-	  TWL4030 Core and TWL4030 GPIO I2C client driver
+	  module will be called twl4030_keypad.
 
 config OMAP_PS2
 	tristate "TI OMAP Innovator 1510 PS/2 keyboard & mouse support"
--- a/drivers/input/keyboard/omap-twl4030keypad.c
+++ b/drivers/input/keyboard/omap-twl4030keypad.c
@@ -25,50 +25,117 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/types.h>
 #include <linux/input.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
-#include <linux/irq.h>
-#include <mach/keypad.h>
 
-#include "twl4030-keypad.h"
-
-#define PTV_PRESCALER		4
-
-#define MAX_ROWS		8 /* TWL4030 hardlimit */
-
-/* Global variables */
+/*
+ * The TWL4030 family chips include a keypad controller that supports
+ * up to an 8x8 switch matrix.  The controller can issue system wakeup
+ * events, since it uses only the always-on 32KiHz oscillator, and has
+ * an internal state machine that decodes pressed keys, including
+ * multi-key combinations.
+ *
+ * This driver lets boards define what keycodes they wish to report for
+ * which scancodes, as part of the "struct twl4030_keypad_data" used in
+ * the probe() routine.
+ *
+ * See the TPS65950 documentation; that's the general availability
+ * version of the TWL5030 second generation part.
+ */
+#define MAX_ROWS		8	/* TWL4030 hard limit */
 
-struct omap_keypad {
-	int		*keymap;
+struct twl4030_keypad {
+	unsigned	*keymap;
 	unsigned int	keymapsize;
 	u16		kp_state[MAX_ROWS];
-	int		n_rows;
-	int		n_cols;
-	int		irq;
+	unsigned	n_rows;
+	unsigned	n_cols;
+	unsigned	irq;
 
 	struct device	*dbg_dev;
-	struct input_dev *omap_twl4030kp;
-
-	/* sync read/write */
-	struct mutex	mutex;
+	struct input_dev *input;
 };
 
-static int twl4030_kpread(struct omap_keypad *kp,
-		u32 module, u8 *data, u32 reg, u8 num_bytes)
+#define ROWCOL_MASK	KEY(0xf, 0xf, 0)
+#define KEYNUM_MASK	~PERSISTENT_KEY(0xf, 0xf)
+
+/*----------------------------------------------------------------------*/
+
+/* arbitrary prescaler value 0..7 */
+#define PTV_PRESCALER			4
+
+/* Register Offsets */
+#define KEYP_CTRL			0x00
+#define KEYP_DEB			0x01
+#define KEYP_LONG_KEY			0x02
+#define KEYP_LK_PTV			0x03
+#define KEYP_TIMEOUT_L			0x04
+#define KEYP_TIMEOUT_H			0x05
+#define KEYP_KBC			0x06
+#define KEYP_KBR			0x07
+#define KEYP_SMS			0x08
+#define KEYP_FULL_CODE_7_0		0x09	/* row 0 column status */
+#define KEYP_FULL_CODE_15_8		0x0a	/* ... row 1 ... */
+#define KEYP_FULL_CODE_23_16		0x0b
+#define KEYP_FULL_CODE_31_24		0x0c
+#define KEYP_FULL_CODE_39_32		0x0d
+#define KEYP_FULL_CODE_47_40		0x0e
+#define KEYP_FULL_CODE_55_48		0x0f
+#define KEYP_FULL_CODE_63_56		0x10
+#define KEYP_ISR1			0x11
+#define KEYP_IMR1			0x12
+#define KEYP_ISR2			0x13
+#define KEYP_IMR2			0x14
+#define KEYP_SIR			0x15
+#define KEYP_EDR			0x16	/* edge triggers */
+#define KEYP_SIH_CTRL			0x17
+
+/* KEYP_CTRL_REG Fields */
+#define KEYP_CTRL_SOFT_NRST		BIT(0)
+#define KEYP_CTRL_SOFTMODEN		BIT(1)
+#define KEYP_CTRL_LK_EN			BIT(2)
+#define KEYP_CTRL_TOE_EN		BIT(3)
+#define KEYP_CTRL_TOLE_EN		BIT(4)
+#define KEYP_CTRL_RP_EN			BIT(5)
+#define KEYP_CTRL_KBD_ON		BIT(6)
+
+/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
+#define KEYP_PERIOD_US(t, prescale)	((t) / (31 << (prescale + 1)) - 1)
+
+/* KEYP_LK_PTV_REG Fields */
+#define KEYP_LK_PTV_PTV_SHIFT		5
+
+/* KEYP_{IMR,ISR,SIR} Fields */
+#define KEYP_IMR1_MIS			BIT(3)
+#define KEYP_IMR1_TO			BIT(2)
+#define KEYP_IMR1_LK			BIT(1)
+#define KEYP_IMR1_KP			BIT(0)
+
+/* KEYP_EDR Fields */
+#define KEYP_EDR_KP_FALLING		0x01
+#define KEYP_EDR_KP_RISING		0x02
+#define KEYP_EDR_KP_BOTH		0x03
+#define KEYP_EDR_LK_FALLING		0x04
+#define KEYP_EDR_LK_RISING		0x08
+#define KEYP_EDR_TO_FALLING		0x10
+#define KEYP_EDR_TO_RISING		0x20
+#define KEYP_EDR_MIS_FALLING		0x40
+#define KEYP_EDR_MIS_RISING		0x80
+
+
+/*----------------------------------------------------------------------*/
+
+static int twl4030_kpread(struct twl4030_keypad *kp,
+		u8 *data, u32 reg, u8 num_bytes)
 {
 	int ret;
 
-	ret = twl4030_i2c_read(module, data, reg, num_bytes);
+	ret = twl4030_i2c_read(TWL4030_MODULE_KEYPAD, data, reg, num_bytes);
 	if (ret < 0) {
 		dev_warn(kp->dbg_dev,
 			"Couldn't read TWL4030: %X - ret %d[%x]\n",
@@ -78,12 +145,11 @@ static int twl4030_kpread(struct omap_ke
 	return ret;
 }
 
-static int twl4030_kpwrite_u8(struct omap_keypad *kp,
-		u32 module, u8 data, u32 reg)
+static int twl4030_kpwrite_u8(struct twl4030_keypad *kp, u8 data, u32 reg)
 {
 	int ret;
 
-	ret = twl4030_i2c_write_u8(module, data, reg);
+	ret = twl4030_i2c_write_u8(TWL4030_MODULE_KEYPAD, data, reg);
 	if (ret < 0) {
 		dev_warn(kp->dbg_dev,
 			"Could not write TWL4030: %X - ret %d[%x]\n",
@@ -93,7 +159,7 @@ static int twl4030_kpwrite_u8(struct oma
 	return ret;
 }
 
-static int omap_kp_find_key(struct omap_keypad *kp, int col, int row)
+static int twl4030_find_key(struct twl4030_keypad *kp, int col, int row)
 {
 	int i, rc;
 
@@ -105,7 +171,7 @@ static int omap_kp_find_key(struct omap_
 	return -EINVAL;
 }
 
-static inline u16 omap_kp_col_xlate(struct omap_keypad *kp, u8 col)
+static inline u16 twl4030_col_xlate(struct twl4030_keypad *kp, u8 col)
 {
 	/* If all bits in a row are active for all coloumns then
 	 * we have that row line connected to gnd. Mark this
@@ -118,20 +184,20 @@ static inline u16 omap_kp_col_xlate(stru
 		return col & ((1 << kp->n_cols) - 1);
 }
 
-static int omap_kp_read_kp_matrix_state(struct omap_keypad *kp, u16 *state)
+static int twl4030_read_kp_matrix_state(struct twl4030_keypad *kp, u16 *state)
 {
 	u8 new_state[MAX_ROWS];
 	int row;
-	int ret = twl4030_kpread(kp, TWL4030_MODULE_KEYPAD,
+	int ret = twl4030_kpread(kp,
 				 new_state, KEYP_FULL_CODE_7_0, kp->n_rows);
 	if (ret >= 0) {
 		for (row = 0; row < kp->n_rows; row++)
-			state[row] = omap_kp_col_xlate(kp, new_state[row]);
+			state[row] = twl4030_col_xlate(kp, new_state[row]);
 	}
 	return ret;
 }
 
-static int omap_kp_is_in_ghost_state(struct omap_keypad *kp, u16 *key_state)
+static int twl4030_is_in_ghost_state(struct twl4030_keypad *kp, u16 *key_state)
 {
 	int i;
 	u16 check = 0;
@@ -147,7 +213,7 @@ static int omap_kp_is_in_ghost_state(str
 	return 0;
 }
 
-static void twl4030_kp_scan(struct omap_keypad *kp, int release_all)
+static void twl4030_kp_scan(struct twl4030_keypad *kp, int release_all)
 {
 	u16 new_state[MAX_ROWS];
 	int col, row;
@@ -156,16 +222,14 @@ static void twl4030_kp_scan(struct omap_
 		memset(new_state, 0, sizeof(new_state));
 	else {
 		/* check for any changes */
-		int ret = omap_kp_read_kp_matrix_state(kp, new_state);
+		int ret = twl4030_read_kp_matrix_state(kp, new_state);
+
 		if (ret < 0)	/* panic ... */
 			return;
-
-		if (omap_kp_is_in_ghost_state(kp, new_state))
+		if (twl4030_is_in_ghost_state(kp, new_state))
 			return;
 	}
 
-	mutex_lock(&kp->mutex);
-
 	/* check for changes and print those */
 	for (row = 0; row < kp->n_rows; row++) {
 		int changed = new_state[row] ^ kp->kp_state[row];
@@ -183,7 +247,7 @@ static void twl4030_kp_scan(struct omap_
 				(new_state[row] & (1 << col)) ?
 				"press" : "release");
 
-			key = omap_kp_find_key(kp, col, row);
+			key = twl4030_find_key(kp, col, row);
 			if (key < 0)
 				dev_warn(kp->dbg_dev,
 					"Spurious key event %d-%d\n",
@@ -191,13 +255,12 @@ static void twl4030_kp_scan(struct omap_
 			else if (key & KEY_PERSISTENT)
 				continue;
 			else
-				input_report_key(kp->omap_twl4030kp, key,
+				input_report_key(kp->input, key,
 						 new_state[row] & (1 << col));
 		}
 		kp->kp_state[row] = new_state[row];
 	}
-
-	mutex_unlock(&kp->mutex);
+	input_sync(kp->input);
 }
 
 /*
@@ -205,7 +268,7 @@ static void twl4030_kp_scan(struct omap_
  */
 static irqreturn_t do_kp_irq(int irq, void *_kp)
 {
-	struct omap_keypad *kp = _kp;
+	struct twl4030_keypad *kp = _kp;
 	u8 reg;
 	int ret;
 
@@ -218,7 +281,7 @@ static irqreturn_t do_kp_irq(int irq, vo
 #endif
 
 	/* Read & Clear TWL4030 pending interrupt */
-	ret = twl4030_kpread(kp, TWL4030_MODULE_KEYPAD, &reg, KEYP_ISR1, 1);
+	ret = twl4030_kpread(kp, &reg, KEYP_ISR1, 1);
 
 	/* Release all keys if I2C has gone bad or
 	 * the KEYP has gone to idle state */
@@ -231,40 +294,38 @@ static irqreturn_t do_kp_irq(int irq, vo
 }
 
 /*
- * Registers keypad device with input sub system
+ * Registers keypad device with input subsystem
  * and configures TWL4030 keypad registers
  */
-static int __init omap_kp_probe(struct platform_device *pdev)
+static int __devinit twl4030_kp_probe(struct platform_device *pdev)
 {
 	u8 reg;
 	int i;
 	int ret = 0;
-	struct omap_keypad *kp;
+	struct twl4030_keypad *kp;
 	struct twl4030_keypad_data *pdata = pdev->dev.platform_data;
 
+	if (!pdata || !pdata->rows || !pdata->cols || !pdata->keymap
+			|| pdata->rows > 8 || pdata->cols > 8) {
+		dev_err(&pdev->dev, "Invalid platform_data\n");
+		return -EINVAL;
+	}
+
 	kp = kzalloc(sizeof(*kp), GFP_KERNEL);
 	if (!kp)
 		return -ENOMEM;
 
-	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
-		dev_err(&pdev->dev, "No rows, cols or keymap from pdata\n");
-		kfree(kp);
-		return -EINVAL;
-	}
-
-	dev_set_drvdata(&pdev->dev, kp);
+	platform_set_drvdata(pdev, kp);
 
 	/* Get the debug Device */
 	kp->dbg_dev = &pdev->dev;
 
-	kp->omap_twl4030kp = input_allocate_device();
-	if (!kp->omap_twl4030kp) {
+	kp->input = input_allocate_device();
+	if (!kp->input) {
 		kfree(kp);
 		return -ENOMEM;
 	}
 
-	mutex_init(&kp->mutex);
-
 	kp->keymap = pdata->keymap;
 	kp->keymapsize = pdata->keymapsize;
 	kp->n_rows = pdata->rows;
@@ -272,82 +333,92 @@ static int __init omap_kp_probe(struct p
 	kp->irq = platform_get_irq(pdev, 0);
 
 	/* setup input device */
-	set_bit(EV_KEY, kp->omap_twl4030kp->evbit);
+	__set_bit(EV_KEY, kp->input->evbit);
 
 	/* Enable auto repeat feature of Linux input subsystem */
 	if (pdata->rep)
-		set_bit(EV_REP, kp->omap_twl4030kp->evbit);
+		__set_bit(EV_REP, kp->input->evbit);
 
 	for (i = 0; i < kp->keymapsize; i++)
-		set_bit(kp->keymap[i] & KEYNUM_MASK,
-				kp->omap_twl4030kp->keybit);
+		__set_bit(kp->keymap[i] & KEYNUM_MASK,
+				kp->input->keybit);
 
-	kp->omap_twl4030kp->name	= "omap_twl4030keypad";
-	kp->omap_twl4030kp->phys	= "omap_twl4030keypad/input0";
-	kp->omap_twl4030kp->dev.parent	= &pdev->dev;
+	kp->input->name		= "TWL4030 Keypad";
+	kp->input->phys		= "twl4030_keypad/input0";
+	kp->input->dev.parent	= &pdev->dev;
 
-	kp->omap_twl4030kp->id.bustype	= BUS_HOST;
-	kp->omap_twl4030kp->id.vendor	= 0x0001;
-	kp->omap_twl4030kp->id.product	= 0x0001;
-	kp->omap_twl4030kp->id.version	= 0x0003;
+	kp->input->id.bustype	= BUS_HOST;
+	kp->input->id.vendor	= 0x0001;
+	kp->input->id.product	= 0x0001;
+	kp->input->id.version	= 0x0003;
 
-	kp->omap_twl4030kp->keycode	= kp->keymap;
-	kp->omap_twl4030kp->keycodesize	= sizeof(unsigned int);
-	kp->omap_twl4030kp->keycodemax	= kp->keymapsize;
+	kp->input->keycode	= kp->keymap;
+	kp->input->keycodesize	= sizeof(unsigned int);
+	kp->input->keycodemax	= kp->keymapsize;
 
-	ret = input_register_device(kp->omap_twl4030kp);
+	ret = input_register_device(kp->input);
 	if (ret < 0) {
 		dev_err(kp->dbg_dev,
 			"Unable to register twl4030 keypad device\n");
 		goto err2;
 	}
 
-	/* Disable auto-repeat */
-	reg = KEYP_CTRL_NOAUTORPT;
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_CTRL);
+	/* Enable controller, with hardware decoding but not autorepeat */
+	reg = KEYP_CTRL_SOFT_NRST | KEYP_CTRL_SOFTMODEN
+		| KEYP_CTRL_TOE_EN | KEYP_CTRL_KBD_ON;
+	ret = twl4030_kpwrite_u8(kp, reg, KEYP_CTRL);
 	if (ret < 0)
 		goto err3;
 
+	/* NOTE:  we could use sih_setup() here to package keypad
+	 * event sources as four different IRQs ... but we don't.
+	 */
+
 	/* Enable TO rising and KP rising and falling edge detection */
 	reg = KEYP_EDR_KP_BOTH | KEYP_EDR_TO_RISING;
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_EDR);
+	ret = twl4030_kpwrite_u8(kp, reg, KEYP_EDR);
 	if (ret < 0)
 		goto err3;
 
 	/* Set PTV prescaler Field */
 	reg = (PTV_PRESCALER << KEYP_LK_PTV_PTV_SHIFT);
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, reg, KEYP_LK_PTV);
+	ret = twl4030_kpwrite_u8(kp, reg, KEYP_LK_PTV);
 	if (ret < 0)
 		goto err3;
 
 	/* Set key debounce time to 20 ms */
 	i = KEYP_PERIOD_US(20000, PTV_PRESCALER);
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, i, KEYP_DEB);
+	ret = twl4030_kpwrite_u8(kp, i, KEYP_DEB);
 	if (ret < 0)
 		goto err3;
 
 	/* Set timeout period to 100 ms */
 	i = KEYP_PERIOD_US(200000, PTV_PRESCALER);
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
-				 (i & 0xFF), KEYP_TIMEOUT_L);
+	ret = twl4030_kpwrite_u8(kp, (i & 0xFF), KEYP_TIMEOUT_L);
+	if (ret < 0)
+		goto err3;
+	ret = twl4030_kpwrite_u8(kp, (i >> 8), KEYP_TIMEOUT_H);
 	if (ret < 0)
 		goto err3;
 
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
-				 (i >> 8), KEYP_TIMEOUT_H);
+	/* Enable Clear-on-Read; disable remembering events that fire
+	 * after the IRQ but before our handler acks (reads) them,
+	 */
+	reg = TWL4030_SIH_CTRL_COR_MASK | TWL4030_SIH_CTRL_PENDDIS_MASK;
+	ret = twl4030_kpwrite_u8(kp, reg, KEYP_SIH_CTRL);
 	if (ret < 0)
 		goto err3;
 
-	/* Enable Clear-on-Read */
-	reg = KEYP_SIH_CTRL_COR | KEYP_SIH_CTRL_PEND_DIS;
-	ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
-				 reg, KEYP_SIH_CTRL);
+	/* initialize key state; irqs update it from here on */
+	ret = twl4030_read_kp_matrix_state(kp, kp->kp_state);
 	if (ret < 0)
 		goto err3;
 
 	/*
 	 * This ISR will always execute in kernel thread context because of
 	 * the need to access the TWL4030 over the I2C bus.
+	 *
+	 * NOTE:  we assume this host is wired to TWL4040 INT1, not INT2 ...
 	 */
 	ret = request_irq(kp->irq, do_kp_irq, 0, pdev->name, kp);
 	if (ret < 0) {
@@ -356,46 +427,42 @@ static int __init omap_kp_probe(struct p
 		goto err3;
 	} else {
 		/* Enable KP and TO interrupts now. */
-		reg = ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
-		ret = twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD,
-					 reg, KEYP_IMR1);
+		reg = (u8) ~(KEYP_IMR1_KP | KEYP_IMR1_TO);
+		ret = twl4030_kpwrite_u8(kp, reg, KEYP_IMR1);
 		if (ret < 0)
 			goto err5;
 	}
 
-	ret = omap_kp_read_kp_matrix_state(kp, kp->kp_state);
-	if (ret < 0)
-		goto err4;
-
 	return ret;
 err5:
 	/* mask all events - we don't care about the result */
-	(void) twl4030_kpwrite_u8(kp, TWL4030_MODULE_KEYPAD, 0xff, KEYP_IMR1);
-err4:
+	(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
 	free_irq(kp->irq, NULL);
 err3:
-	input_unregister_device(kp->omap_twl4030kp);
+	input_unregister_device(kp->input);
+	kp->input = NULL;
 err2:
-	input_free_device(kp->omap_twl4030kp);
-
+	input_free_device(kp->input);
+	kfree(kp);
 	return -ENODEV;
 }
 
-static int omap_kp_remove(struct platform_device *pdev)
+static int __devexit twl4030_kp_remove(struct platform_device *pdev)
 {
-	struct omap_keypad *kp = dev_get_drvdata(&pdev->dev);
+	struct twl4030_keypad *kp = platform_get_drvdata(pdev);
 
 	free_irq(kp->irq, kp);
-	input_unregister_device(kp->omap_twl4030kp);
+	input_unregister_device(kp->input);
 	kfree(kp);
 
 	return 0;
 }
 
+MODULE_ALIAS("platform:twl4030_keypad");
 
-static struct platform_driver omap_kp_driver = {
-	.probe		= omap_kp_probe,
-	.remove		= __devexit_p(omap_kp_remove),
+static struct platform_driver twl4030_kp_driver = {
+	.probe		= twl4030_kp_probe,
+	.remove		= __devexit_p(twl4030_kp_remove),
 	.driver		= {
 		.name	= "twl4030_keypad",
 		.owner	= THIS_MODULE,
@@ -405,19 +472,18 @@ static struct platform_driver omap_kp_dr
 /*
  * OMAP TWL4030 Keypad init
  */
-static int __devinit omap_kp_init(void)
+static int __init twl4030_kp_init(void)
 {
-	return platform_driver_register(&omap_kp_driver);
+	return platform_driver_register(&twl4030_kp_driver);
 }
+module_init(twl4030_kp_init);
 
-static void __exit omap_kp_exit(void)
+static void __exit twl4030_kp_exit(void)
 {
-	platform_driver_unregister(&omap_kp_driver);
+	platform_driver_unregister(&twl4030_kp_driver);
 }
+module_exit(twl4030_kp_exit);
 
-module_init(omap_kp_init);
-module_exit(omap_kp_exit);
-MODULE_ALIAS("platform:twl4030_keypad");
 MODULE_AUTHOR("Texas Instruments");
-MODULE_DESCRIPTION("OMAP TWL4030 Keypad Driver");
+MODULE_DESCRIPTION("TWL4030 Keypad Driver");
 MODULE_LICENSE("GPL");
--- a/drivers/input/keyboard/twl4030-keypad.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * drivers/input/keyboard/twl4030-keypad.h
- *
- * Copyright (C) 2006-2007 Texas Instruments, Inc.
- *
- * Intial Code:
- *	Syed Mohammed Khasim <x0khasim@xxxxxx>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __TWL4030_KEYPAD_H__
-#define __TWL4030_KEYPAD_H__
-
-/* Register Definitions */
-#define KEYP_CTRL				0x00
-#define KEYP_DEB				0x01
-#define KEYP_LONG_KEY				0x02
-#define KEYP_LK_PTV				0x03
-#define KEYP_TIMEOUT_L				0x04
-#define KEYP_TIMEOUT_H				0x05
-#define KEYP_FULL_CODE_7_0			0x09
-#define KEYP_ISR1				0x11
-#define KEYP_IMR1				0x12
-#define KEYP_EDR				0x16
-#define KEYP_SIH_CTRL				0x17
-
-/* KEYP_CTRL_REG Fields */
-#define KEYP_CTRL_SOFT_NRST			0x01
-#define KEYP_CTRL_SOFTMODEN			0x02
-#define KEYP_CTRL_LK_EN				0x04
-#define KEYP_CTRL_TOE_EN			0x08
-#define KEYP_CTRL_TOLE_EN			0x10
-#define KEYP_CTRL_RP_EN				0x20
-#define KEYP_CTRL_KBD_ON			0x40
-
-
-#define KEYP_CTRL_NOAUTORPT			(KEYP_CTRL_SOFT_NRST |	\
-						 KEYP_CTRL_SOFTMODEN |	\
-						 KEYP_CTRL_TOE_EN |	\
-						 KEYP_CTRL_KBD_ON)
-
-/* KEYP_DEB, KEYP_LONG_KEY, KEYP_TIMEOUT_x*/
-#define KEYP_PERIOD_US(T, prescale)		(T / (31 << (prescale + 1)) - 1)
-
-/* KEYP_LK_PTV_REG Fields */
-#define KEYP_LK_PTV_PTV_SHIFT			5
-
-/* KEYP_IMR1 Fields */
-#define KEYP_IMR1_MIS				0x08
-#define KEYP_IMR1_TO				0x04
-#define KEYP_IMR1_LK				0x02
-#define KEYP_IMR1_KP				0x01
-
-/* KEYP_EDR Fields */
-#define KEYP_EDR_KP_FALLING			0x01
-#define KEYP_EDR_KP_RISING			0x02
-#define KEYP_EDR_KP_BOTH			0x03
-#define KEYP_EDR_LK_FALLING			0x04
-#define KEYP_EDR_LK_RISING			0x08
-#define KEYP_EDR_TO_FALLING			0x10
-#define KEYP_EDR_TO_RISING			0x20
-#define KEYP_EDR_MIS_FALLING			0x40
-#define KEYP_EDR_MIS_RISING			0x80
-
-/* KEYP_SIH_CTRL Fields */
-#define KEYP_SIH_CTRL_COR			0x04
-#define KEYP_SIH_CTRL_PEND_DIS			0x02
-#define KEYP_SIH_CTRL_EXCL_EN			0x01
-
-#endif	/* End of __TWL4030-KEYPAD_H__ */
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -302,11 +302,19 @@ struct twl4030_madc_platform_data {
 	int		irq_line;
 };
 
+/* Boards have uniqe mappings of {col, row} --> keycode.
+ * Column and row are 4 bits, but range only from 0..7;
+ * a PERSISTENT_KEY is "always on" and never reported.
+ */
+#define KEY_PERSISTENT		0x00800000
+#define KEY(col, row, keycode)	(((col) << 28) | ((row) << 24) | (keycode))
+#define PERSISTENT_KEY(c, r)	KEY(c, r, KEY_PERSISTENT)
+
 struct twl4030_keypad_data {
-	int rows;
-	int cols;
-	int *keymap;
-	unsigned int keymapsize;
+	unsigned rows;
+	unsigned cols;
+	unsigned *keymap;
+	unsigned short keymapsize;
 	unsigned int rep:1;
 };
 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux