Re: [PATCH v2] board-omap3beagle: set i2c-3 to 100kHz

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Op 4 feb 2009, om 20:58 heeft Koen Kooi het volgende geschreven:


Op 25 jan 2009, om 13:04 heeft David Brownell het volgende geschreven:

On Sunday 25 January 2009, Koen Kooi wrote:
From: Koen Kooi <koen@xxxxxxxxxxxxxxx>

Changing it do 100kHz is needed to make more devices works properly. Controlling the TI DLP Pico projector[1] doesn't work properly at 400kHz, 100kHz and lower work fine. EDID readout is unaffected by this change.

[1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234

Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxx>

Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>

ping

Any more changes needed before this can go in?

regards,

Koen

Attachment: PGP.sig
Description: Dit deel van het bericht is digitaal ondertekend


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux