Re: [PATCH v2] board-omap3beagle: set i2c-3 to 100kHz

[Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>]

Op 20 feb 2009, om 17:25 heeft Tony Lindgren het volgende geschreven:

> * Tony Lindgren <tony@xxxxxxxxxxx> [090206 14:56]:
> > * Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx> [090206 06:16]:
> > > Op 4 feb 2009, om 20:58 heeft Koen Kooi het volgende geschreven:
> > >
> > > > Op 25 jan 2009, om 13:04 heeft David Brownell het volgende  
> > > > geschreven:
> > > >
> > > > > On Sunday 25 January 2009, Koen Kooi wrote:
> > > > > > From: Koen Kooi <koen@xxxxxxxxxxxxxxx>
> > > > > >
> > > > > > Changing it do 100kHz is needed to make more devices works
> > > > > > properly. Controlling the TI DLP Pico projector[1] doesn't work
> > > > > > properly at 400kHz, 100kHz and lower work fine. EDID readout is
> > > > > > unaffected by this change.
> > > > > >
> > > > > > [1] http://focus.ti.com/dlpdmd/docs/dlpdiscovery.tsp?sectionId=60&tabId=2234
> > > > > >
> > > > > > Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxx>
> > > > >
> > > > > Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
> > > >
> > > > ping
> > >
> > > Any more changes needed before this can go in?
> >
> > Just few more days, I'll need to get my upstream queues ready..
> > Otherwise I'll forget to apply it somewhere :)
>
> OK, adding to omap-fixes and pushing to linux-omap.

Thanks!

Attachment: PGP.sig
Description: Dit deel van het bericht is digitaal ondertekend